We may as well make pgstat_count_heap_scan() and related macros just count
whenever rel->pgstat_info isn't null. Testing pgstat_track_counts buys
nothing at all in the normal case where that flag is ON; and when it's OFF,
the pgstat_info link will be null, so it's still a useless test.
This change is unlikely to buy any noticeable performance improvement,
but a cycle shaved is a cycle earned; and my investigations earlier today
convinced me that we're down to the point where individual instructions in
the inner execution loops are starting to matter.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
This patch merges the responsibility for NOT-flattening into
eval_const_expressions' processing. It wasn't done that way originally
because prepqual.c is far older than eval_const_expressions. But putting
this work into eval_const_expressions saves one pass over the qual trees,
and in fact saves even more than that because we can exploit the knowledge
that the subexpressions have already been recursively simplified. Doing it
this way also lets us do it uniformly over all expressions, whereas
prepqual.c formerly just did it at top level to save cycles. That should
improve the planner's ability to recognize logically-equivalent constructs.
While at it, also add the ability to fold a NOT into BooleanTest and
NullTest constructs (the latter only for the scalar-datatype case).
Per discussion of bug #5702.
Completion is supported in the context of \set and when interpolating
a variable value using :foo etc.
In passing, fix some places in tab-complete.c that weren't following
project style for comment formatting.
Pavel Stehule, reviewed by Itagaki Takahiro
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This patch resurrects some of the information that could be logged by the
old, now-dead implementation of VACUUM FULL, in particular counts of live
and dead tuples and the time taken for the table rebuild proper. There's
still no logging about the ensuing index rebuilds, though.
Itagaki Takahiro
Use a macro LogicalTapeReadExact() to encapsulate the error check when
we want to read an exact number of bytes from a "tape". Per a suggestion
of Takahiro Itagaki.
This patch eliminates per-chunk palloc overhead for most small allocations
needed in the representation of an ispell dictionary. This saves close to
a factor of 2 on the current Czech ispell data. While it doesn't cover
every last small allocation in the ispell code, we are at the point of
diminishing returns, because about 95% of the allocations are covered
already.
Pavel Stehule, rather heavily revised by Tom
Add explicit initialization and cleanup functions to spell.c, and keep
all working state in the already-existing ISpellDict struct. This lets us
get rid of a static variable along with some extremely shaky assumptions
about usage of child memory contexts.
This commit is just code beautification and has no impact on functionality
or performance, but it opens the way to a less-grotty implementation of
Pavel's memory-saving hack, which will follow shortly.
In versions 8.2 and up, the grammar allows attaching ORDER BY, LIMIT,
FOR UPDATE, or WITH to VALUES, and hence to INSERT ... VALUES. But the
special-case code for VALUES in transformInsertStmt() wasn't expecting any
of those, and just ignored them, leading to unexpected results. Rather
than complicate the special-case path, just ensure that the presence of any
of those clauses makes us treat the query as if it had a general SELECT.
Per report from Hitoshi Harada.
Actually making this case work, if the column is used in the trigger's
WHEN condition, will take some new code that probably isn't appropriate
to back-patch. For now, just throw a FEATURE_NOT_SUPPORTED error rather
than allowing control to reach the "unexpected object" case. Per bug #5688
from Daniel Grace. Back-patch to 9.0 where the possibility of such a
dependency was introduced.
There are numerous methods by which a Perl or Tcl function can subvert
the behavior of another such function executed later; for example, by
redefining standard functions or operators called by the target function.
If the target function is SECURITY DEFINER, or is called by such a
function, this means that any ordinary SQL user with Perl or Tcl language
usage rights can do essentially anything with the privileges of the target
function's owner.
To close this security hole, create a separate Perl or Tcl interpreter for
each SQL userid under which plperl or pltcl functions are executed within
a session. However, all plperlu or pltclu functions run within a session
still share a single interpreter, since they all execute at the trust
level of a database superuser anyway.
Note: this change results in a functionality loss when libperl has been
built without the "multiplicity" option: it's no longer possible to call
plperl functions under different userids in one session, since such a
libperl can't support multiple interpreters in one process. However, such
a libperl already failed to support concurrent use of plperl and plperlu,
so it's likely that few people use such versions with Postgres.
Security: CVE-2010-3433
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
1. Resurrect the behavior where old commits on master will have Branch:
labels for branches sprouted after the commit was made. I'm still
dubious about this mode, but if you want it, say --post-date or -p.
2. Annotate the Branch: labels with the release or branch in which the
commit was publicly released. For example, on a release branch you could
see
Branch: REL8_3_STABLE Release: REL8_3_2 [92c3a8004] 2008-03-29 00:15:37 +0000
showing that the fix was released in 8.3.2. Commits on master will
usually instead have notes like
Branch: master Release: REL8_4_BR [6fc9d4272] 2008-03-29 00:15:28 +0000
showing that this commit is ancestral to release branches 8.4 and later.
If no Release: marker appears, the commit hasn't yet made it into any
release.
3. Add support for release branches older than 7.4.
4. The implementation is improved by running git log on each branch only
back to where the branch sprouts from master. This saves a good deal
of time (about 50% of the runtime when generating the complete history).
We generate the post-date-mode tags via a direct understanding that
they should be applied to master commits made before the branch sprouted,
rather than backing into them via matching (which isn't any too
reliable when people used identical log messages for successive commits).
1. Don't assume there's only one candidate match; check them all and use the
one with the closest timestamp. Avoids funny output when someone makes
several successive commits with the same log message, as certain people
have been known to do.
2. When the same commit (with the same SHA1) is reachable from multiple
branch tips, don't report it for all the branches; instead report it only
for the first such branch. Given our development practices, this case
arises only for commits that occurred before a given branch split off from
master. The original coding blamed old commits on *all* the branches,
which isn't terribly useful; the new coding blames such a commit only on
master.
1. Don't forget the last (oldest) commit on the oldest branch.
2. When considering which commit to print next, if two alternatives have
the same "distortion" score (which is actually the normal case, since
generally the "distortion" is 0), then choose the later timestamp to
print first. I don't know where Robert got the idea to ignore timestamps
and sort by branch age, but it wasn't a good idea: the resulting ordering
of commits was just plain bizarre anywhere that some branches had many
fewer commits than others, which is the typical situation for us.
Avoid depending on Date::Calc, which isn't in a basic Perl installation,
when we can equally well use Time::Local which is. Also fix the parsing
of timestamps to take heed of the timezone. (It looks like cvs2git emitted
all commit timestamps with zone GMT, so this refinement might've looked
unnecessary when looking at converted data; but it's needed now.)
Fix parsing of message bodies so that blank lines that may or may not get
emitted by "git log" aren't confused with real data. This avoids strange
formatting of the oldest commit on a branch.
Check child-process exit status, so that we actually notice if "git log"
fails, and so that we don't accumulate zombie children.
The previous coding would decide that join removal was unsafe upon finding
a PlaceHolderVar that needed to be evaluated at the inner rel and then used
above the join. However, this fails to cover the case of PlaceHolderVars
that refer to both the inner rel and some other rels. Per bug report from
Andrus.
hasn't been set.
The only known case where this can happen is when show_session_authorization
is invoked in an autovacuum process, which is possible if an index function
calls it, as for example in bug #5669 from Andrew Geery. We could perhaps
try to return a sensible value, such as the name of the cluster-owning
superuser; but that seems like much more trouble than the case is worth,
and in any case it could create new possible failure modes. Simply
returning an empty string seems like the most appropriate fix.
Back-patch to all supported versions, even those before autovacuum, just
in case there's another way to provoke this crash.
In some situations the original coding led to corrupting the child AppendRel's
subpaths list, effectively adding other members of the parent's list to it.
This was usually masked because we never made any further use of the child's
list, but given the right combination of circumstances, we could do so. The
visible symptom would be a relation getting scanned twice, as in bug #5673
from David Schmitt.
Backpatch to 8.2, which is as far back as the risky coding appears. The
example submitted by David only fails in 8.4 and later, but I'm not convinced
that there aren't any even-more-obscure cases where 8.2 and 8.3 would fail.
We can't actually print the parent RelOptInfo in toto, because that would
lead to infinite recursion. But it's safe enough to reach into the parent
and print its identifying relids, and that makes it a whole lot easier
to figure out what a Path represents. Should have done this years ago.
servers. AFAICT it's harmless at the moment because nothing can depend on
either, but as soon as we introduce an object type with such dependencies,
tableoid needs to be set or pg_dump will fail to interpret the dependencies
correctly. In theory, I guess the uninitialized garbage in tableoid could
cause the object to be mistaken for some other object with same OID as well.
This was unintentionally broken in 8.4 while tightening up checking of
ordinary non-Julian date inputs to forbid references to "year zero".
Per bug #5672 from Benjamin Gigot.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
Poking around for remaining occurrences of CVS keyword strings, I came
across one that apparently reflects the use of a $Revision: ...$ string
in the original input data. Dunno why anybody would be using that in
an MTA's Received: lines, but there it is. Put it back to the way that
it was originally, according to inspection of the CVS repo.
This script is intended to substitute for cvs2cl in generating release
notes and scrutinizing what got back-patched to which branches.
Script by me. Support for --since by Alex Hunsaker.
The previous coding just terminated the COPY immediately after seeing
the EOF marker (-1 where a row field count is expected). The expected
CopyDone or CopyFail message just got thrown away later, since we weren't
in COPY mode anymore. This behavior complicated matters for the JDBC
driver, and arguably was the wrong thing in any case since a CopyFail
message after the marker wouldn't be honored.
Note that there is a behavioral change here: extra data after the EOF
marker was silently ignored before, but now it will cause an error.
Hence not back-patching, although this is arguably a bug.
Per report and patch by Kris Jurka.
the same number of columns expected by the insert. This suggests that there
were extra parentheses that converted the intended column list into a row
expression.
Original patch by Marko Tiikkaja, rather heavily editorialized by me.
since it can happen when a process fails to start when the system
is under high load.
Per several bug reports and many peoples investigation.
Back-patch to 8.4, which is as far back as the "deadman-switch"
for shared memory access exists.
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
dynamic pool of event handles, we can permanently assign one for each
shared latch. Thanks to that, we no longer need a separate shared memory
block for latches, and we don't need to know in advance how many shared
latches there is, so you no longer need to remember to update
NumSharedLatches when you introduce a new latch to the system.
In these cases a qual can get marked with the removable rel in its
required_relids, but this is just to schedule its evaluation correctly, not
because it really depends on the rel. We were assuming that, in effect,
we could throw away *all* quals so marked, which is nonsense. Tighten up
the logic to be a little more paranoid about which quals belong to the
outer join being considered for removal, and arrange for all quals that
don't belong to be updated so they will still get evaluated correctly.
Also fix another problem that happened to be exposed by this test case,
which was that make_join_rel() was failing to notice some cases where
a constant-false qual could be used to prove a join relation empty. If it's
a pushed-down constant false, then the relation is empty even if it's an
outer join, because the qual applies after the outer join expansion.
Per report from Nathan Grange. Back-patch into 9.0.
an online backup instead of performing one. pg_ctl can detect that by
checking if recovery.conf exists.
Backup label file is renamed away early in recovery, so the window where
backup label exists during recovery is normally very small, but you can run
into it e.g if restore_command is set incorrectly and the startup process
never finds even the first WAL segment containing the checkpoint record to
start recovery from.
Fujii Masao with comments by me.
make sense for walsender, but for example application_name and client_encoding
do. We still don't apply per-role settings from pg_db_role_setting, because
that would require connecting to a database to read the table.
Fujii Masao
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
Peter's original patch had this right, but I dropped the check while revising
the code to search pg_constraint instead of pg_index. Spotted by Dean Rasheed.
A long time ago, this didn't work nicely, but it seems to work on all recent
versions of OS X. The blank-pad method is less desirable since it results
in lots of extra space in ps' output. Per Alexey Klyukin.
Since the code underlying pg_get_expr() is not secure against malformed
input, and can't practically be made so, we need to prevent miscreants
from feeding arbitrary data to it. We can do this securely by declaring
pg_get_expr() to take a new datatype "pg_node_tree" and declaring the
system catalog columns that hold nodeToString output to be of that type.
There is no way at SQL level to create a non-null value of type pg_node_tree.
Since the backend-internal operations that fill those catalog columns
operate below the SQL level, they are oblivious to the datatype relabeling
and don't need any changes.
SI invalidation events, rather than indirectly through the relcache.
In the previous coding, we had to flush a composite-type typcache entry
whenever we discarded the corresponding relcache entry. This caused problems
at least when testing with RELCACHE_FORCE_RELEASE, as shown in recent report
from Jeff Davis, and might result in real-world problems given the kind of
unexpected relcache flush that that test mechanism is intended to model.
The new coding decouples relcache and typcache management, which is a good
thing anyway from a structural perspective. The cost is that we have to
search the typcache linearly to find entries that need to be flushed. There
are a couple of ways we could avoid that, but at the moment it's not clear
it's worth any extra trouble, because the typcache contains very few entries
in typical operation.
Back-patch to 8.2, the same as some other recent fixes in this general area.
The patch could be carried back to 8.0 with some additional work, but given
that it's only hypothetical whether we're fixing any problem observable in
the field, it doesn't seem worth the work now.
initialize the rd_backend field of a fake Relation entry correctly.
Fortunately, that is easy, since only non-temp relations should ever be
mentioned in the WAL stream.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
Peter Eisentraut reports that some bits of the "address" variable
in get_object_address() give "may be used uninitialized" warnings;
this likes the only excuse his compiler could have for thinking
that's possible.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
Egypt and Palestine. Added new names for two Micronesian timezones:
Pacific/Chuuk is now preferred over Pacific/Truk (and the preferred
abbreviation is CHUT not TRUT) and Pacific/Pohnpei is preferred over
Pacific/Ponape. Historical corrections for Finland.
returning "record" actually do have the same rowtype. This is needed because
the parser can't realistically enforce that they will all have the same typmod,
as seen in a recent example from David Wheeler.
Back-patch to 8.0, which is as far back as we have the notion of RECORD
subtypes being distinguished by typmod. Wheeler's example depends on
8.4-and-up features, but I suspect there may be ways to provoke similar
failures before 8.4.
It turns out that some platforms return ENOMEM for a request that violates
SHMALL, whereas we were assuming that ENOSPC would always be used for that.
Apparently the latter is a Linuxism while ENOMEM is the BSD tradition.
Extend the ENOMEM hint to suggest that raising SHMALL might be needed.
Per gripe from A.M.
Backpatch to 9.0, but not further, because this doesn't seem important
enough to warrant creating extra translation work in the stable branches.
(If it were, we'd have figured this out years ago.)
This is reproducibly possible in Python 2.7 if the user turned
PendingDeprecationWarning into an error, but it's theoretically also possible
in earlier versions in case of exceptional conditions.
backpatched to 8.0
files automatically. Otherwise, the following could happen: When
starting from a clean source tree, the first build would delete the
intermediate file, but also create the dependency file, which
mentions the intermediate file, thus making it non-intermediate.
The second build will then need to rebuild the now non-intermediate
missing file. So the second build will do work even though nothing
had changed. One place where this happens is the .c -> .o -> .so
chain for some contrib modules.
There is no reason that proc.c should have to get involved in this dirty hack
for letting the postmaster know which children are walsenders. Revert that
file to the way it was, and confine the kluge to pmsignal.c and postmaster.c.
array_in discards unquoted leading and trailing whitespace in array values,
while array_out is careful to quote array elements that contain whitespace.
This is problematic when the definition of "whitespace" varies between
locales: array_in could drop characters that were meant to be part of the
value. To avoid that, lock down "whitespace" to mean only the traditional
six ASCII space characters.
This change also works around a bug in OS X and some older BSD systems, in
which isspace() could return true for character fragments in UTF8 locales.
(There may be other places in PG where that bug could cause problems, but
this is the only one complained of so far; see recent report from Steven
Schlansker.)
Back-patch to 9.0, but not further. Given the lack of previous reports
of trouble, changing this behavior in stable branches seems to offer
more risk of breaking applications than reward of avoiding problems.
The original coding tended to break down in the face of modified restore
orders, as shown in bug #5626 from Albert Ullrich, because it would flip over
into parallel-restore operation too soon. That causes problems because we
don't have sufficient dependency information in dump archives to allow safe
parallel processing of SECTION_PRE_DATA items. Even if we did, it's probably
undesirable to allow that to override the commanded restore order.
To fix the problem of omitted items causing unexpected changes in restore
order, tweak SortTocFromFile so that omitted items end up at the head of
the list not the tail. This ensures that they'll be examined and their
dependencies will be marked satisfied before we get to any interesting
items.
In HEAD and 9.0, we can easily change restore_toc_entries_parallel so that
all SECTION_PRE_DATA items are guaranteed to be processed in the initial
serial-restore loop, and hence in commanded order. Only DATA and POST_DATA
items are candidates for parallel processing. For them there might be
variations from the commanded order because of parallelism, but we should
do it in a safe order thanks to dependencies.
In 8.4 it's much harder to make such a guarantee. I settled for not
letting the initial loop break out into parallel processing mode if
it sees a DATA/POST_DATA item that's not to be restored; this at least
prevents a non-restorable item from causing premature exit from the loop.
This means that 8.4 will be more likely to fail given a badly-ordered -L
list than 9.x, but we don't really promise any such thing will work anyway.
Since an SMgrRelation now knows whether or not the underlying relation is
temporary, there's no point in also passing that information via an
additional argument.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
Aside from being more forgiving, this prevents a rather surprising misbehavior
when the "wrong" order was used: the old code didn't throw a syntax error,
but absorbed the INTO clause into the last USING expression, which then did
strange things downstream.
Intentionally not changing the documentation; we'll continue to advertise
only the "standard" clause order.
Backpatch to 8.4, where the USING clause was added to EXECUTE.
It's not clear if this situation can occur in plpgsql other than via the
EXECUTE USING case Heikki illustrated, which I will shortly close off.
However, ignoring the intoClause if it's there is surely wrong, so let's
patch it for safety.
Backpatch to 8.3, which is as far back as this code has a PlannedStmt
to deal with. There might be another way to make an equivalent test
before that, but since this is just preventing hypothetical bugs,
I'm not going to obsess about it.
pointed out, it would need a 2nd pass after the whole query is processed to
correctly check that an unknown Param is coerced to the same target type
everywhere. Adding the 2nd pass would add a lot more code, which doesn't
seem worth the risk given that there isn't much of a use case for passing
unknown Params in the first place. The code would work without that check,
but it might be confusing and the behavior would be different from the
varparams case.
Instead, just coerce all unknown params in a PL/pgSQL USING clause to text.
That's simple, and is usually what users expect.
Revert the patch in CVS HEAD and master, and backpatch the new solution to
8.4. Unlike the previous solution, this applies easily to 8.4 too.
into TopMemoryContext. This makes no functional difference, but makes it
easier to see what the space is being used for in MemoryContextStats dumps.
Per a recent example in which I was surprised by the size of TopMemoryContext.
afterTriggerInvokeEvents failed to adjust events->tailfree when truncating
the last chunk of an event list. This could result in the data being
"de-truncated" by afterTriggerRestoreEventList during a subsequent
subtransaction abort. Even that wouldn't kill us, because the re-added data
would just be events marked DONE --- unless the data had been partially
overwritten by new events. Then we might crash, or in any case misbehave
(perhaps fire triggers twice, or fire triggers with the wrong event data).
Per bug #5622 from Thue Janus Kristensen.
Back-patch to 8.4 where the current trigger list representation was introduced.
In the new API introduced by my patch to include the backend ID in
temprel filenames, the last argument to smrgextend() became skipFsync
rather than isTemp, but these calls didn't get the memo. It's not
really a problem to pass rel->rd_istemp rather than just plain false,
because smgrextend() now automatically skips the fsync for temprels
anyway, but this seems cleaner and saves some minute number of cycles.
ExecModifyTable(). This avoids memory leakage when trigger functions leave
junk behind in that context (as they more or less must). Problem and solution
identified by Dean Rasheed.
I'm a bit concerned about the longevity of this solution --- once a plan can
have multiple ModifyTable nodes, we are very possibly going to have to do
something different. But it should hold up for 9.0.
elsewhere.
Similarly rename the version in mbprint.c, not because this affects anything
but just to keep the two copies in exact sync. There was some discussion of
having only one copy in src/port/ instead, but this function is so small
and unlikely to change that that seems like overkill.
Slightly editorialized version of a patch by Joseph Adams. (The bug-fix
aspect of his patch was applied separately, and back-patched.)
The implicitly created sequence was created as owned by the current user,
who could be different from the table owner, eg if current user is a
superuser or some member of the table's owning role. This caused sanity
checks in the SEQUENCE OWNED BY code to spit up. Although possibly we
don't need those sanity checks, the safest fix seems to be to make sure
the implicit sequence is assigned the same owner role as the table has.
(We still do all permissions checks as the current user, however.)
Per report from Josh Berkus.
Back-patch to 9.0. The bug goes back to the invention of SEQUENCE OWNED BY
in 8.2, but the fix requires an API change for DefineRelation(), which seems
to have potential for breaking third-party code if done in a minor release.
Given the lack of prior complaints, it's probably not worth fixing in the
stable branches.
_outPlannedStmt is only debug support, so the omission there was not very
serious, but the omission in _copyPlannedStmt is a real bug. The consequence
would be that a copied plan tree would never be marked as a transient plan,
so that we would forget we ought to replan it after some not-yet-ready index
becomes ready for use. This might explain some past complaints about indexes
created with CREATE INDEX CONCURRENTLY not being used right away. Problem
spotted by Yeb Havinga.
Back-patch to 8.3, where the field was added.
parse_analyze() function. That case occurs e.g with PL/pgSQL
EXECUTE ... USING 'stringconstant'.
The coercion with a CoerceViaIO node. The result is similar to the coercion
via input function performed for unknown constants in coerce_type(),
except that this happens at runtime.
Backpatch to 9.0. The issue is present in 8.4 as well, but the coerce param
hook infrastructure this patch relies on was introduced in 9.0. Given the
lack of user reports and harmlessness of the bug, it's not worth attempting
a different fix just for 8.4.
socket lockfile) when writing them. The lack of an fsync here may well
explain two different reports we've seen of corrupted lockfile contents,
which doesn't particularly bother the running server but can prevent a
new server from starting if the old one crashes. Per suggestion from
Alvaro.
Back-patch to all supported versions.
This is appropriate for the same reasons we already do it in
LockSharedObject(): things might have changed while we were waiting
for the lock. There doesn't seem to be a live bug here at the moment,
but that's mostly because it isn't currently used for very much.
in particular, propagate a fix in the test to see whether a UTF8 character has
length 4 bytes. This is likely of little real-world consequence because
5-or-more-byte UTF8 sequences are not supported by Postgres nor seen anywhere
in the wild, but still we may as well get it right. Problem found by Joseph
Adams.
Bug is aboriginal, so back-patch all the way.
used by array_agg(), string_agg(), and similar aggregate functions that use
"internal" as their transition datatype. The previous coding thought this
took *no* extra space, since "internal" is pass-by-value; but actually these
aggregates typically consume a great deal of space. Per bug #5608 from
Itagaki Takahiro, and fix suggestion from Hitoshi Harada.
Back-patch to 8.4, where array_agg was introduced.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
I just noticed that libpq's pqsignal.h was violating our general inclusion
style guidelines by explicitly including postgres_fe.h. Remove that, and
put it in pqsignal.c where it belongs.
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
path that specifies useTemp, but there is no active temp schema in the
current session. (This can happen if the path was saved during a transaction
that created a temp schema and was later rolled back.) For existing callers
it's sufficient to ignore the useTemp flag in this case, though we might
later want to offer an option to create a fresh temp schema. So far as I can
tell this is just an Assert failure: in a non-assert build, the code would
push a zero onto the new search path, which is useless but not very harmful.
Per bug report from Heikki.
Back-patch to 8.3; prior versions don't have this code.
Since the only purpose of WAL-loggin SharedInvalidationMessages is to support
Hot Standby operation, they needn't be included when wal_level < hot_standby.
Back-patch to 9.0.
Review by Heikki Linnakanagas and Fujii Masao.
and input file name, per bug #5617 from Leo Shklovskii. Rearrange the
corresponding code in pg_dump and pg_dumpall so that all three programs
handle this in a consistent, straightforward fashion.
Back-patch to 9.0, but no further. Although this is certainly a bug, it's
possible that people have scripts that will be broken by the added error
check, so it seems better not to change the behavior in stable branches.
and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
better handling of NULL elements within the arrays. The third parameter
is a string that should be used to represent a NULL element, or should
be translated into a NULL element, respectively. If the third parameter
is NULL it behaves the same as the two-parameter form.
There are two incompatible changes in the behavior of the two-parameter form
of string_to_array. First, it will return an empty (zero-element) array
rather than NULL when the input string is of zero length. Second, if the
field separator is NULL, the function splits the string into individual
characters, rather than returning NULL as before. These two changes make
this form fully compatible with the behavior of the new three-parameter form.
Pavel Stehule, reviewed by Brendan Jurd
expressions. We need to deal with this when handling subscripts in an array
assignment, and also when catching an exception. In an Assert-enabled build
these omissions led to Assert failures, but I think in a normal build the
only consequence would be short-term memory leakage; which may explain why
this wasn't reported from the field long ago.
Back-patch to all supported versions. 7.4 doesn't have exceptions, but
otherwise these bugs go all the way back.
Heikki Linnakangas and Tom Lane
can be caught in the same places that could catch an ordinary RAISE ERROR
in the same location. The previous coding insisted on throwing the error
from the block containing the active exception handler; which is arguably
more surprising, and definitely unlike Oracle's behavior.
Not back-patching, since this is a pretty obscure corner case. The risk
of breaking somebody's code in a minor version update seems to outweigh
any possible benefit.
Piyush Newe, reviewed by David Fetter
statistics counts. These numbers are being accumulated but haven't yet been
transmitted to the collector (and won't be, until the transaction ends).
For some purposes, though, it's handy to be able to look at them.
Joel Jacobson, reviewed by Itagaki Takahiro
Tom Lane
Bruce Momjian
Andrew Dunstan
Robert Haas
Itagaki Takahiro
Peter Eisentraut
Heikki Linnakangas
Magnus Hagander
Joe Conway
Michael Meskes
Simon Riggs
Alvaro Herrera