We mustn't run generate_gather_paths() during add_paths_to_joinrel(),
because that function can be invoked multiple times for the same target
joinrel. Not only is it wasteful to build GatherPaths repeatedly, but
a later add_partial_path() could delete the partial path that a previously
created GatherPath depends on. Instead establish the convention that we
do generate_gather_paths() for a rel only just before set_cheapest().
The code was accidentally not broken for baserels, because as of today there
never is more than one partial path for a baserel. But that assumption
obviously has a pretty short half-life, so move the generate_gather_paths()
calls for those cases as well.
Also add some generic comments explaining how and why this all works.
Per fuzz testing by Andreas Seltenreich.
Report: <871t5pgwdt.fsf@credativ.de>
Rather than filling a temporary array and then copying values to the
output array, we can generate the required random permutation in-place
using the Fisher-Yates shuffle algorithm. This is shorter as well as
more efficient than before. It's pretty unlikely that anyone would
notice a speed improvement, but shorter code is better.
Nathan Wagner, edited a bit by me
Since both forms are arguably legal I wasn't sure about changing
this. But then Tom argued for 'therefore'...
Author: Dmitriy Olshevskiy
Discussion: 34789.1430067832@sss.pgh.pa.us
Back in commit 400e2c9344 I rewrote GEQO's
gimme_tree function to improve its heuristic for modifying the given tour
into a legal join order. In what can only be called a fit of hubris,
I supposed that this new heuristic would *always* find a legal join order,
and ripped out the old logic that allowed gimme_tree to sometimes fail.
The folly of this is exposed by bug #12760, in which the "greedy" clumping
behavior of merge_clump() can lead it into a dead end which could only be
recovered from by un-clumping. We have no code for that and wouldn't know
exactly what to do with it if we did. Rather than try to improve the
heuristic rules still further, let's just recognize that it *is* a
heuristic and probably must always have failure cases. So, put back the
code removed in the previous commit to allow for failure (but comment it
a bit better this time).
It's possible that this code was actually fully correct at the time and
has only been broken by the introduction of LATERAL. But having seen this
example I no longer have much faith in that proposition, so back-patch to
all supported branches.
In the initial cut at LATERAL, I kept the rule that cheapest_total_path
was always unparameterized, which meant it had to be NULL if the relation
has no unparameterized paths. It turns out to work much more nicely if
we always have *some* path nominated as cheapest-total for each relation.
In particular, let's still say it's the cheapest unparameterized path if
there is one; if not, take the cheapest-total-cost path among those of
the minimum available parameterization. (The first rule is actually
a special case of the second.)
This allows reversion of some temporary lobotomizations I'd put in place.
In particular, the planner can now consider hash and merge joins for
joins below a parameter-supplying nestloop, even if there aren't any
unparameterized paths available. This should bring planning of
LATERAL-containing queries to the same level as queries not using that
feature.
Along the way, simplify management of parameterized paths in add_path()
and friends. In the original coding for parameterized paths in 9.2,
I tried to minimize the logic changes in add_path(), so it just treated
parameterization as yet another dimension of comparison for paths.
We later made it ignore pathkeys (sort ordering) of parameterized paths,
on the grounds that ordering isn't a useful property for the path on the
inside of a nestloop, so we might as well get rid of useless parameterized
paths as quickly as possible. But we didn't take that reasoning as far as
we should have. Startup cost isn't a useful property inside a nestloop
either, so add_path() ought to discount startup cost of parameterized paths
as well. Having done that, the secondary sorting I'd implemented (in
add_parameterized_path) is no longer needed --- any parameterized path that
survives add_path() at all is worth considering at higher levels. So this
should be a bit faster as well as simpler.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
glibc renders random() thread-safe by wrapping a futex lock around it;
testing reveals that this limits the performance of pgbench on machines
with many CPU cores. Rather than switching to random_r(), which is
only available on GNU systems and crashes unless you use undocumented
alchemy to initialize the random state properly, switch to our built-in
implementation of erand48(), which is both thread-safe and concurrent.
Since the list of reasons not to use the operating system's erand48()
is getting rather long, rename ours to pg_erand48() (and similarly
for our implementations of lrand48() and srand48()) and just always
use those. We were already doing this on Cygwin anyway, and the
glibc implementation is not quite thread-safe, so pgbench wouldn't
be able to use that either.
Per discussion with Tom Lane.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
by adding a requirement that build_join_rel add new join RelOptInfos to the
appropriate list immediately at creation. Per report from Robert Haas,
the list_concat_unique_ptr() calls that this change eliminates were taking
the lion's share of the runtime in larger join problems. This doesn't do
anything to fix the fundamental combinatorial explosion in large join
problems, but it should push out the threshold of pain a bit further.
Note: because this changes the order in which joinrel lists are built,
it might result in changes in selected plans in cases where different
alternatives have exactly the same costs. There is one example in the
regression tests.
sequence, even when the input "tour" doesn't lead directly to such a sequence.
The stack logic that was added in 2004 only supported cases where relations
that had to be joined to each other (due to join order restrictions) were
adjacent in the tour. However, relying on a random search to figure that out
is tremendously inefficient in large join problems, and could even fail
completely (leading to "failed to make a valid plan" errors) if
random_init_pool ran out of patience. It seems better to make the
tour-to-plan transformation a little bit fuzzier so that every tour can form
a legal plan, even though this means that apparently different tours will
sometimes yield the same plan.
In the same vein, get rid of the logic that knew that tours (a,b,c,d,...)
are the same as tours (b,a,c,d,...), and therefore insisted the latter
are invalid. The chance of generating two tours that differ only in
this way isn't that high, and throwing out 50% of possible tours to
avoid such duplication seems more likely to waste valuable genetic-
refinement generations than to do anything useful.
This leaves us with no cases in which geqo_eval will deem a tour invalid,
so get rid of assorted kluges that tried to deal with such cases, in
particular the undocumented assumption that DBL_MAX is an impossible
plan cost.
This is all per testing of Robert Haas' lets-remove-the-collapse-limits
patch. That idea has crashed and burned, at least for now, but we still
got something useful out of it.
It's possible we should back-patch this change, since the "failed to make a
valid plan" error can happen in existing releases; but I'd rather not until
it has gotten more testing.
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
that overlap an outer join's min_righthand but aren't fully contained in it,
to support joining within the RHS after having performed an outer join that
can commute with this one. Aside from the direct fix in make_join_rel(),
fix has_join_restriction() and GEQO's desirable_join() to consider this
possibility. Per report from Ian Harding.
joinclause doesn't use any outer-side vars) requires a "bushy" plan to be
created. The normal heuristic to avoid joins with no joinclause has to be
overridden in that case. Problem is new in 8.2; before that we forced the
outer join order anyway. Per example from Teodor.
outer joins. Originally it was only looking for overlap of the righthand
side of a left join, but we have to do it on the lefthand side too.
Per example from Jean-Pierre Pelletier.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
if geqo_rand() returns exactly 1.0, resulting in failure due to indexing
off the end of the pool array. Also, since this is using inexact float math,
it seems wise to guard against roundoff error producing values slightly
outside the expected range. Per report from bug@zedware.org.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
Tom Lane
Bruce Momjian
Andres Freund
Robert Haas
Peter Eisentraut
Magnus Hagander
PostgreSQL Daemon