work if either of the join relations are empty. The logic is:
(1) if the inner relation's startup cost is less than the outer
relation's startup cost and this is not an outer join, read
a single tuple from the inner relation via ExecHash()
- if NULL, we're done
(2) read a single tuple from the outer relation
- if NULL, we're done
(3) build the hash table on the inner relation
- if hash table is empty and this is not an outer join,
we're done
(4) otherwise, do hash join as usual
The implementation uses the new MultiExecProcNode API, per a
suggestion from Tom: invoking ExecHash() now produces the first
tuple from the Hash node's child node, whereas MultiExecHash()
builds the hash table.
I had to put in a bit of a kludge to get the row count returned
for EXPLAIN ANALYZE to be correct: since ExecHash() is invoked to
return a tuple, and then MultiExecHash() is invoked, we would
return one too many tuples to EXPLAIN ANALYZE. I hacked around
this by just manually detecting this situation and subtracting 1
from the EXPLAIN ANALYZE row count.
"AT TIME ZONE", and not just the shorlist previously available. For
example:
SELECT CURRENT_TIMESTAMP AT TIME ZONE 'Europe/London';
works fine now. It will also obey whatever DST rules were in effect at
just that date, which the previous implementation did not.
It also supports the AT TIME ZONE on the timetz datatype. The whole
handling of DST is a bit bogus there, so I chose to make it use whatever
DST rules are in effect at the time of executig the query. not sure if
anybody is actuallyi *using* timetz though, it seems pretty
unpredictable just because of this...
Magnus Hagander
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
if geqo_rand() returns exactly 1.0, resulting in failure due to indexing
off the end of the pool array. Also, since this is using inexact float math,
it seems wise to guard against roundoff error producing values slightly
outside the expected range. Per report from bug@zedware.org.
constraint while determining whether the index sort order matches the
query's ORDER BY. This for example allows an index on (x,y) to match
... WHERE x = 42 ORDER BY y;
It only works for btree indexes, but since those are the only ones we
currently have that are ordered at all, that's good enough for now.
Per popular demand.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
These contain the SQLSTATE and error message of the current exception,
respectively. They are scope-local variables that are only defined
in exception handlers (so attempting to reference them outside an
exception handler is an error). Update the regression tests and the
documentation.
Also, do some minor related cleanup: export an unpack_sql_state()
function from the backend and use it to unpack a SQLSTATE into a
string, and add a free_var() function to pl_exec.c
Original patch from Pavel Stehule, review by Neil Conway.
to a subquery if the outer query is simple enough that the LIMIT can
be reflected directly to the subquery. This didn't use to be very
interesting, because a subquery that couldn't have been flattened into
the upper query was usually not going to be very responsive to
tuple_fraction anyway. But with new code that allows UNION ALL subqueries
to pay attention to tuple_fraction, this is useful to do. In particular
this lets the optimization occur when the UNION ALL is directly inside
a view.
if the limit were directly applied to it. This does not actually
add a LIMIT plan node to the generated subqueries --- that would be
useless overhead --- but it does cause the planner to prefer fast-
start plans when the limit is small. After an idea from Phil Endecott.
this in turn causes CREATE TABLE AS in plpgsql to set ROW_COUNT.
This is how it behaved before 7.4; I had unintentionally changed the
behavior in a bit of sloppy micro-optimization.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
as well as the existing pg_catalog entries for prefix and postfix %.
These have never been documented, though they did appear in one old
regression test. This avoids surprising behavior in cases like
"SELECT -25 % -10". Per recent discussion.
Note: although there is a catalog change here, I did not force initdb
since there's no harm in leaving the inaccessible entries in one's
copy of pg_operator.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
last nextval() or setval() performed by the current session. Update the
docs, add regression tests, and bump the catalog version. Patch from
Dennis Björklund, various improvements by Neil Conway.
---------------------------------------------------------------------------
While playing around, I got the following error message:
--
FATAL: pre-existing shared memory block (key 5432001, ID 90898435) is
still in use
HINT: If you're sure there are no old server processes still running,
remove the shared memory block with the command "ipcrm", or just delete
the file "/home/hlinnaka/pgsql/data/postmaster.pid".
---
Thats normal because I used "kill -9 postmaster" to shut down.
The hint advises me to use "ipcrm", but there's the "ipcclean" script in
bin for just this purpose. The hint should probably advise to use
ipcclean.
The attached patch replaces all occurances of "ipcrm" with "ipcclean" in
src/backend/utils/init/miscinit.c and all the translations in
src/backend/po.
While reviewing the patch, I noticed a likely typo in hr.po. While I
don't
speak Croatian, the translation seems to advise to use the "icpm(1)"
command. I changed that to "ipcclean" too.
Heikki Linnakangas
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
other_rel_list with a single array indexed by rangetable index.
This reduces find_base_rel from O(N) to O(1) without any real penalty.
While find_base_rel isn't one of the major bottlenecks in any profile
I've seen so far, it was starting to creep up on the radar screen
for complex queries --- so might as well fix it.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
representation as the jointree) with two lists of RTEs, one showing
the RTEs accessible by qualified names, and the other showing the RTEs
accessible by unqualified names. I think this is conceptually simpler
than what we did before, and it's sure a whole lot easier to search.
This seems to eliminate the parse-time bottleneck for deeply nested
JOIN structures that was exhibited by phil@vodafone.
---------------------------------------------------------------------------
Tom Lane <tgl@sss.pgh.pa.us> writes:
> a_ogawa <a_ogawa@hi-ho.ne.jp> writes:
> > It is a reasonable idea. However, the majority part of MemSet was not
> > able to be avoided by this idea. Because the per-tuple contexts are used
> > at the early stage of executor.
>
> Drat. Well, what about changing that? We could introduce additional
> contexts or change the startup behavior so that the ones that are
> frequently reset don't have any data in them unless you are working
> with pass-by-ref values inside the inner loop.
That might be possible. However, I think that we should change only
aset.c about this article.
I thought further: We can check whether context was used from the last
reset even when blocks list is not empty. Please see attached patch.
Bruce Momjian
Tom Lane
Neil Conway
Teodor Sigaev
Tatsuo Ishii