It's not safe to raise an error while holding spinlock. But previously
logical replication worker for table sync called the function which
reads the system catalog and may raise an error while it's holding
spinlock. Which could lead to the trouble where spinlock will never
be released and the server gets stuck infinitely.
Author: Petr Jelinek
Reviewed-by: Kyotaro Horiguchi and Fujii Masao
Reported-by: Fujii Masao
Discussion: http://postgr.es/m/CAHGQGwFDWh_Qr-q_GEMpD+qH=vYPMdVqw=ZOSY3kX_Pna9R9SA@mail.gmail.com
is_parallel_safe() supposed that the only relevant property of a SubPlan
was the parallel safety of the referenced subplan tree. This is wrong:
the testexpr or args subtrees might contain parallel-unsafe stuff, as
demonstrated by the test case added here. However, just recursing into the
subtrees fails in a different way: we'll typically find PARAM_EXEC Params
representing the subplan's output columns in the testexpr. The previous
coding supposed that any Param must be treated as parallel-restricted, so
that a naive attempt at fixing this disabled parallel pushdown of SubPlans
altogether. We must instead determine, for any visited Param, whether it
is one that would be computed by a surrounding SubPlan node; if so, it's
safe to push down along with the SubPlan node.
We might later be able to extend this logic to cope with Params used for
correlated subplans and other cases; but that's a task for v11 or beyond.
Tom Lane and Amit Kapila
Discussion: https://postgr.es/m/7064.1492022469@sss.pgh.pa.us
Since it appears that v10 is going to move the goalposts by some amount
in terms of where you can and can't invoke set-returning functions,
arrange for the executor's "set-valued function called in context that
cannot accept a set" errors to include a syntax position if possible,
pointing to the specific SRF that can't be called where it's located.
The main bit of infrastructure needed for this is to make the query source
text accessible in the executor; but it turns out that commit 4c728f382
already did that. We just need a new function executor_errposition()
modeled on parser_errposition(), and we're ready to rock.
While experimenting with this, I noted that the error position wasn't
properly reported if it occurred in a plpgsql FOR-over-query loop,
which turned out to be because SPI_cursor_open_internal wasn't providing
an error context callback during PortalStart. Fix that.
There's a whole lot more that could be done with this infrastructure
now that it's there, but this is not the right time in the development
cycle for that sort of work. Hence, resist the temptation to plaster
executor_errposition() calls everywhere ... for the moment.
Discussion: https://postgr.es/m/5263.1492471571@sss.pgh.pa.us
* Be sure to reset the launcher's pid (LogicalRepCtx->launcher_pid) to 0
even when the launcher emits an error.
* Declare ApplyLauncherWakeup() as a static function because it's called
only in launcher.c.
* Previously IsBackendPId() was used to check whether the launcher's pid
was valid. IsBackendPid() was necessary because there was the bug where
the launcher's pid was not reset to 0. But now it's fixed, so IsBackendPid()
is not necessary and this patch removes it.
Author: Masahiko Sawada
Reviewed-by: Kyotaro Horiguchi
Reported-by: Fujii Masao
Discussion: http://postgr.es/m/CAHGQGwFDWh_Qr-q_GEMpD+qH=vYPMdVqw=ZOSY3kX_Pna9R9SA@mail.gmail.com
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Discussion: https://www.postgresql.org/message-id/fde71ff1-5858-90c8-99a9-1c2427e7bafb@iki.fi
Doing so allows various crash possibilities. Fix by avoiding
having PrescanPreparedTransactions() increment
ShmemVariableCache->nextXid when it has no 2PC files
Bug found by Jeff Janes, diagnosis and patch by Pavan Deolasee,
then patch re-designed for clarity and full accuracy by
Michael Paquier.
Reported-by: Jeff Janes
Author: Pavan Deolasee, Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1zMLnH_i1-PVQ-biZzvNx7VcuatriquEnh7HNk6K8Ss3Q@mail.gmail.com
CopyFrom() needs a range table for formatting certain errors for
constraint violations.
This changes the mechanism of how the range table is passed to the
CopyFrom() executor state. We used to generate the range table and one
entry for the relation manually inside DoCopy(). Now we use
addRangeTableEntryForRelation() to setup the range table and relation
entry for the ParseState, which is then passed down by BeginCopyFrom().
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Euler Taveira <euler@timbira.com.br>
We were accepting creation of extended statistics only for regular
tables, but they can usefully be created for foreign tables, partitioned
tables, and materialized views, too. Allow those cases.
While at it, make sure all the rejected cases throw a consistent error
message, and add regression tests for the whole thing.
Author: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-BmGo410bh5RSPZUvOO0LhmHL2NYmdrC_Jm8pk_FfyCA@mail.gmail.com
We were applying the use_physical_tlist optimization to all relation
scan plans, even those implemented by custom scan providers. However,
that's a bad idea for a couple of reasons. The custom provider might
be unable to provide columns that it hadn't expected to be asked for
(for example, the custom scan might depend on an index-only scan).
Even more to the point, there's no good reason to suppose that this
"optimization" is a win for a custom scan; whatever the custom provider
is doing is likely not based on simply returning physical heap tuples.
(As a counterexample, if the custom scan is an interface to a column store,
demanding all columns would be a huge loss.) If it is a win, the custom
provider could make that decision for itself and insert a suitable
pathtarget into the path, anyway.
Per discussion with Dmitry Ivanov. Back-patch to 9.5 where custom scan
support was introduced. The argument that the custom provider can adjust
the behavior by changing the pathtarget only applies to 9.6+, but on
balance it seems more likely that use_physical_tlist will hurt custom
scans than help them.
Discussion: https://postgr.es/m/e29ddd30-8ef9-4da5-a50b-2bb7b8c7198d@postgrespro.ru
Either because of a previous ALTER TABLE .. SET STATISTICS 0 or because
of being invoked with a partial column list, ANALYZE could fail to
acquire sufficient data to build extended statistics. Previously, this
would draw an ERROR and fail to collect any statistics at all (extended
and regular). Change things so that we raise a WARNING instead, and
remove a hint that was wrong in half the cases.
Reported by: David Rowley
Discussion: https://postgr.es/m/CAKJS1f9Kk0NF6Fg7TA=JUXsjpS9kX6NVu27pb5QDCpOYAvb-Og@mail.gmail.com
Coverity complained because bgw.bgw_extra wasn't being filled in by
ApplyLauncherRegister(). The most future-proof fix is to memset the
whole BackgroundWorker struct to zeroes. While at it, let's apply the
same coding rule to other places that set up BackgroundWorker structs;
four out of five had the same or related issues.
addRangeTableEntryForENR had a check for pstate != NULL, which Coverity
pointed out was rather useless since it'd already dereferenced pstate
before that. More to the point, we'd established policy in commit
bc93ac12c that we'd require non-NULL pstate for all addRangeTableEntryFor*
functions; this test was evidently copied-and-pasted from some older
version of one of those functions. Make it look more like the others.
In passing, make an elog message look more like the rest of the code,
too.
Michael Paquier
In standard non-Windows builds, there's no particular reason to care what
address the kernel chooses to map the shared memory segment at. However,
when building with EXEC_BACKEND, there's a risk that the chosen address
won't be available in all child processes. Linux with ASLR enabled (which
it is by default) seems particularly at risk because it puts shmem segments
into the same area where it maps shared libraries. We can work around
that by specifying a mapping address that's outside the range where
shared libraries could get mapped. On x86_64 Linux, 0x7e0000000000
seems to work well.
This is only meant for testing/debugging purposes, so it doesn't seem
necessary to go as far as providing a GUC (or any user-visible
documentation, though we might change that later). Instead, it's just
controlled by setting an environment variable PG_SHMEM_ADDR to the
desired attach address.
Back-patch to all supported branches, since the point here is to
remove intermittent buildfarm failures on EXEC_BACKEND animals.
Owners of affected animals will need to add a suitable setting of
PG_SHMEM_ADDR to their build_env configuration.
Discussion: https://postgr.es/m/7036.1492231361@sss.pgh.pa.us
We'd already recognized that we can't pass function pointers across process
boundaries for functions in loadable modules, since a shared library could
get loaded at different addresses in different processes. But actually the
practice doesn't work for functions in the core backend either, if we're
using EXEC_BACKEND. This is the cause of recent failures on buildfarm
member culicidae. Switch to passing a string function name in all cases.
Something like this needs to be back-patched into 9.6, but let's see
if the buildfarm likes it first.
Petr Jelinek, with a bunch of basically-cosmetic adjustments by me
Discussion: https://postgr.es/m/548f9c1d-eafa-e3fa-9da8-f0cc2f654e60@2ndquadrant.com
AFAICT, the only actual benefit of closing a bootstrap transaction
is to reclaim transient memory. We can do that a lot more cheaply
by just doing a MemoryContextReset on a suitable context. This
gets the runtime of the "bootstrap" phase of initdb down to the
point where, at least by eyeball, it's quite negligible compared
to the rest of the phases. Per discussion with Andres Freund.
Discussion: https://postgr.es/m/9244.1492106743@sss.pgh.pa.us
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
regexport.c thought it could just ignore LACON arcs, but the correct
behavior is to treat them as satisfiable while consuming zero input
(rather reminiscently of commit 9f1e642d5). Otherwise, the emitted
simplified-NFA representation may contain no paths leading from initial
to final state, which unsurprisingly confuses pg_trgm, as seen in
bug #14623 from Jeff Janes.
Since regexport's output representation has no concept of an arc that
consumes zero input, recurse internally to find the next normal arc(s)
after any LACON transitions. We'd be forced into changing that
representation if a LACON could be the last arc reaching the final
state, but fortunately the regex library never builds NFAs with such
a configuration, so there always is a next normal arc.
Back-patch to 9.3 where this logic was introduced.
Discussion: https://postgr.es/m/20170413180503.25948.94871@wrigleys.postgresql.org
This contains some protocol changes to SASL authentiation (which is new
in v10):
* For future-proofing, in the AuthenticationSASL message that begins SASL
authentication, provide a list of SASL mechanisms that the server
supports, for the client to choose from. Currently, it's always just
SCRAM-SHA-256.
* Add a separate authentication message type for the final server->client
SASL message, which the client doesn't need to respond to. This makes
it unambiguous whether the client is supposed to send a response or not.
The SASL mechanism should know that anyway, but better to be explicit.
Also, in the server, support clients that don't send an Initial Client
response in the first SASLInitialResponse message. The server is supposed
to first send an empty request in that case, to which the client will
respond with the data that usually comes in the Initial Client Response.
libpq uses the Initial Client Response field and doesn't need this, and I
would assume any other sensible implementation to use Initial Client
Response, too, but let's follow the SASL spec.
Improve the documentation on SASL authentication in protocol. Add a
section describing the SASL message flow, and some details on our
SCRAM-SHA-256 implementation.
Document the different kinds of PasswordMessages that the frontend sends
in different phases of SASL authentication, as well as GSS/SSPI
authentication as separate message formats. Even though they're all 'p'
messages, and the exact format depends on the context, describing them as
separate message formats makes the documentation more clear.
Reviewed by Michael Paquier and Álvaro Hernández Tortosa.
Discussion: https://www.postgresql.org/message-id/CAB7nPqS-aFg0iM3AQOJwKDv_0WkAedRjs1W2X8EixSz+sKBXCQ@mail.gmail.com
Formerly, the bootstrap backend looked up the OIDs corresponding to
names in regproc catalog entries using brute-force searches of pg_proc.
It was somewhat remarkable that that worked at all, since it was used
while populating other pretty-fundamental catalogs like pg_operator.
And it was also quite slow, and getting slower as pg_proc gets bigger.
This patch moves the lookup work into genbki.pl, so that the values in
postgres.bki for regproc columns are always numeric OIDs, an option
that regprocin() already supported. Perl isn't the world's speediest
language, so this about doubles the time needed to run genbki.pl (from
0.3 to 0.6 sec on my machine). But we only do that at most once per
build. The time needed to run initdb drops significantly --- on my
machine, initdb --no-sync goes from 1.8 to 1.3 seconds. So this is
a small net win even for just one initdb per build, and it becomes
quite a nice win for test sequences requiring many initdb runs.
Strip out the now-dead code for brute-force catalog searching in
regprocin. We'd also cargo-culted similar logic into regoperin
and some (not all) of the other reg*in functions. That is all
dead code too since we currently have no need to load such values
during bootstrap. I removed it all, reasoning that if we ever
need such functionality it'd be much better to do it in a similar
way to this patch.
There might be some simplifications possible in the backend now that
regprocin doesn't require doing catalog reads so early in bootstrap.
I've not looked into that, though.
Andreas Karlsson, with some small adjustments by me
Discussion: https://postgr.es/m/30896.1492006367@sss.pgh.pa.us
Free each SASL message after sending it. It's not a lot of wasted memory,
and it's short-lived, but the authentication code in general tries to
pfree() stuff, so let's follow the example.
Adding the pfree() revealed a little bug in build_server_first_message().
It attempts to keeps a copy of the sent message, but it was missing a
pstrdup(), so the pointer started to dangle, after adding the pfree()
into CheckSCRAMAuth().
Reword comments and debug messages slightly, while we're at it.
Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/6490b975-5ee1-6280-ac1d-af975b19fb9a@iki.fi
Commit 5e6d8d2bb allowed parallel workers to execute parallel-safe
subplans, but it transmitted the query's entire list of subplans to
the worker(s). Since execMain.c blindly does ExecInitNode and later
ExecEndNode on every list element, this resulted in parallel-unsafe plan
nodes nonetheless getting started up and shut down in parallel workers.
That seems mostly harmless as far as core plan node types go (but
maybe not so much for Gather?). But it resulted in postgres_fdw
opening and then closing extra remote connections, and it's likely
that other non-parallel-safe FDWs or custom scan providers would have
worse reactions.
To fix, just make ExecSerializePlan replace parallel-unsafe subplans
with NULLs in the cut-down plan tree that it transmits to workers.
This relies on ExecInitNode and ExecEndNode to do nothing on NULL
input, but they do anyway. If anything else is touching the dropped
subplans in a parallel worker, that would be a bug to be fixed.
(This thus provides a strong guarantee that we won't try to do
something with a parallel-unsafe subplan in a worker.)
This is, I think, the last fix directly occasioned by Andreas Seltenreich's
bug report of a few days ago.
Tom Lane and Amit Kapila
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
We'd managed to avoid doing this so far, but it seems pretty obvious
that it would be forced on us some day, and this is much the cleanest
way of approaching the open problem that parallel-unsafe subplans are
being transmitted to parallel workers. Anyway there's no space cost
due to alignment considerations, and the time cost is pretty minimal
since we're just copying the flag from the corresponding Path node.
(At least in most cases ... some of the klugier spots in createplan.c
have to work a bit harder.)
In principle we could perhaps get rid of SubPlan.parallel_safe,
but I thought it better to keep that in case there are reasons to
consider a SubPlan unsafe even when its child plan is parallel-safe.
This patch doesn't actually do anything with the new flags, but
I thought I'd commit it separately anyway.
Note: although this touches outfuncs/readfuncs, there's no need for
a catversion bump because Plan trees aren't stored on disk.
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
validateCheckConstraint() shouldn't try to access the storage for
a partitioned table, because it no longer has any. Creating a
_RETURN table on a partitioned table shouldn't be allowed, both
because there's no value in it and because trying to do so would
involve a validation scan against its nonexistent storage.
Amit Langote, reviewed by Tom Lane. Regression test outputs
updated to pass by me.
Discussion: http://postgr.es/m/e5c3cbd3-1551-d6f8-c9e2-51777d632fd2@lab.ntt.co.jp
To prevent future bugs along the lines of the one corrected by commit
8ff518699f, or find any that remain
in the current code, add an Assert() that the difference between
parallel_register_count and parallel_terminate_count is in a sane
range.
Kuntal Ghosh, with considerable tidying-up by me, per a suggestion
from Neha Khatri. Reviewed by Tomas Vondra.
Discussion: http://postgr.es/m/CAFO0U+-E8yzchwVnvn5BeRDPgX2z9vZUxQ8dxx9c0XFGBC7N1Q@mail.gmail.com
Commit b460f5d669 failed to contemplate
the possibilit that a parallel worker registered before a crash would
be unregistered only after the crash; if that happened, we'd end up
with parallel_terminate_count > parallel_register_count and the
system would refuse to launch any more parallel workers.
The easiest way to fix that seems to be to forget BGW_NEVER_RESTART
workers in ResetBackgroundWorkerCrashTimes() rather than leaving them
around to be cleaned up after the conclusion of the restart, so that
they go away before rather than after shared memory is reset.
To make sure that this fix is water-tight, don't allow parallel
workers to be anything other than BGW_NEVER_RESTART, so that after
recovering from a crash, 0 is guaranteed to be the correct starting
value for parallel_register_count. The core code wouldn't do this
anyway, but somebody might try to do it in extension code.
Report by Thomas Vondra. Patch by me, reviewed by Kuntal Ghosh.
Discussion: http://postgr.es/m/CAGz5QC+AVEVS+3rBKRq83AxkJLMZ1peMt4nnrQwczxOrmo3CNw@mail.gmail.com
This commit also does
- add REPLICATION_SUBSCRIBERS into config_group
- mark max_logical_replication_workers and max_sync_workers_per_subscription
as REPLICATION_SUBSCRIBERS parameters
- move those parameters into "Subscribers" section in postgresql.conf.sample
Author: Masahiko Sawada, Petr Jelinek and me
Reported-by: Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoAonSCoa=v=87ZO3vhfUZA1k_E2XRNHTt=xioWGUa+0ug@mail.gmail.com
This used to mean "Visual C++ except in those parts where Borland C++
was supported where it meant one of those". Now that we don't support
Borland C++ anymore, simplify by using _MSC_VER which is the normal way
to detect Visual C++.
The previously used ShareRowExclusiveLock, while technically probably
more correct, led to deadlocks during seemingly unrelated operations and
thus a poor experience. Use RowExclusiveLock, like for most similar
catalog operations. In some care cases, the user might see an error
from DDL commands.
Discussion: https://www.postgresql.org/message-id/flat/13592.1490851519%40sss.pgh.pa.us
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
The backend local copy of dsa_area_control->freed_segment_counter was
not properly initialized / maintained. This could, if unlucky, lead
to keeping attached to a segment for too long.
Found via valgrind bleat on buildfarm animal skink.
Author: Thomas Munro
Discussion: https://postgr.es/m/20170407164935.obsf2jipjfos5zei@alap3.anarazel.de
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
We decided in f1b4c771ea to pass the
original slot to ExecConstraints(), but that breaks when there are
BEFORE ROW triggers involved. So we need to do reverse-map the tuples
back to the original descriptor instead, as Amit originally proposed.
Amit Langote, reviewed by Ashutosh Bapat. One overlooked comment
fixed by me.
Discussion: http://postgr.es/m/b3a17254-6849-e542-2353-bde4e880b6a4@lab.ntt.co.jp
Commit 4deb41381 modified isolationtester's query to see whether a
session is blocked to also check for waits occurring in GetSafeSnapshot.
However, it did that in a way that enormously increased the query's
runtime under CLOBBER_CACHE_ALWAYS, causing the buildfarm members
that use that to run about four times slower than before, and in some
cases fail entirely. To fix, push the entire logic into a dedicated
backend function. This should actually reduce the CLOBBER_CACHE_ALWAYS
runtime from what it was previously, though I've not checked that.
In passing, expose a SQL function to check for safe-snapshot blockage,
comparable to pg_blocking_pids. This is more or less free given the
infrastructure built to solve the other problem, so we might as well.
Thomas Munro
Discussion: https://postgr.es/m/20170407165749.pstcakbc637opkax@alap3.anarazel.de
Commit ac2b09508 was not terribly carefully reviewed. Band-aid it to
not fail on non-RestrictInfo input, per report from Andreas Seltenreich.
Also make it do something more reasonable with variable-free clauses,
and improve nearby comments.
Discussion: https://postgr.es/m/87inmf5rdx.fsf@credativ.de
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
When adding atomics back in b64d92f1a, I added 64bit support as
optional; there wasn't yet a direct user in sight. That turned out to
be a bit short-sighted, it'd already have been useful a number of times.
Add a fallback implementation of 64bit atomics, just like the one we
have for 32bit atomics.
Additionally optimize reads/writes to 64bit on a number of platforms
where aligned writes of that size are atomic. This can now be tested
with PG_HAVE_8BYTE_SINGLE_COPY_ATOMICITY.
Author: Andres Freund
Reviewed-By: Amit Kapila
Discussion: https://postgr.es/m/20160330230914.GH13305@awork2.anarazel.de
The WAL-writing piece was forgetting to set the pages-per-range value.
Also, fix the declared type of struct member heapBlk, which I mistakenly
set as OffsetNumber rather than BlockNumber.
Problem was introduced by commit c655899ba9 (April 1st). Any system
that tries to replay the new WAL record written before this fix is
likely to die on replay and require pg_resetwal.
Reported by Tom Lane.
Discussion: https://postgr.es/m/20191.1491524824@sss.pgh.pa.us
As reported by Sean Johnston in bug #14614, since 9.6 the planner can fail
due to trying to look up the referent of a Var with varno 0. This happens
because we generate such Vars in generate_append_tlist, for lack of any
better way to describe the output of a SetOp node. In typical situations
nothing really cares about that, but given nested set-operation queries
we will call estimate_num_groups on the output of the subquery, and that
wants to know what a Var actually refers to. That logic used to look at
subquery->targetList, but in commit 3fc6e2d7f I'd switched it to look at
subroot->processed_tlist, ie the actual output of the subquery plan not the
parser's idea of the result. It seemed like a good idea at the time :-(.
As a band-aid fix, change it back.
Really we ought to have an honest way of naming the outputs of SetOp steps,
which suggests that it'd be a good idea for the parser to emit an RTE
corresponding to each one. But that's a task for another day, and it
certainly wouldn't yield a back-patchable fix.
Report: https://postgr.es/m/20170407115808.25934.51866@wrigleys.postgresql.org
An important step of SASLprep normalization, is to convert the string to
Unicode normalization form NFKC. Unicode normalization requires a fairly
large table of character decompositions, which is generated from data
published by the Unicode consortium. The script to generate the table is
put in src/common/unicode, as well test code for the normalization.
A pre-generated version of the tables is included in src/include/common,
so you don't need the code in src/common/unicode to build PostgreSQL, only
if you wish to modify the normalization tables.
The SASLprep implementation depends on the UTF-8 functions from
src/backend/utils/mb/wchar.c. So to use it, you must also compile and link
that. That doesn't change anything for the current users of these
functions, the backend and libpq, as they both already link with wchar.o.
It would be good to move those functions into a separate file in
src/commmon, but I'll leave that for another day.
No documentation changes included, because there is no details on the
SCRAM mechanism in the docs anyway. An overview on that in the protocol
specification would probably be good, even though SCRAM is documented in
detail in RFC5802. I'll write that as a separate patch. An important thing
to mention there is that we apply SASLprep even on invalid UTF-8 strings,
to support other encodings.
Patch by Michael Paquier and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqSByyEmAVLtEf1KxTRh=PWNKiWKEKQR=e1yGehz=wbymQ@mail.gmail.com
With this change array fields are populated from json(b) arrays, and
composite fields are populated from json(b) objects.
Along the way, some significant code refactoring is done to remove
redundancy in the way to populate_record[_set] and to_record[_set]
functions operate, and some significant efficiency gains are made by
caching tuple descriptors.
Nikita Glukhov, edited some by me.
Reviewed by Aleksander Alekseev and Tom Lane.
tupconvert.c's functions formerly considered that an explicit tuple
conversion was necessary if the input and output tupdescs contained
different type OIDs. The point of that was to make sure that a composite
datum resulting from the conversion would contain the destination rowtype
OID in its composite-datum header. However, commit 3838074f8 entirely
misunderstood what that check was for, thinking that it had something to do
with presence or absence of an OID column within the tuple. Removal of the
check broke the no-op conversion path in ExecEvalConvertRowtype, as
reported by Ashutosh Bapat.
It turns out that of the dozen or so call sites for tupconvert.c functions,
ExecEvalConvertRowtype is the only one that cares about the composite-datum
header fields in the output tuple. In all the rest, we'd much rather avoid
an unnecessary conversion whenever the tuples are physically compatible.
Moreover, the comments in tupconvert.c only promise physical compatibility
not a metadata match. So, let's accept the removal of the guarantee about
the output tuple's rowtype marking, recognizing that this is a API change
that could conceivably break third-party callers of tupconvert.c. (So,
let's remember to mention it in the v10 release notes.)
However, commit 3838074f8 did have a bit of a point here, in that two
tuples mustn't be considered physically compatible if one has HEAP_HASOID
set and the other doesn't. (Some of the callers of tupconvert.c might not
really care about that, but we can't assume it in general.) The previous
check accidentally covered that issue, because no RECORD types ever have
OIDs, while if two tupdescs have the same named composite type OID then,
a fortiori, they have the same tdhasoid setting. If we're removing the
type OID match check then we'd better include tdhasoid match as part of
the physical compatibility check.
Without that hack in tupconvert.c, we need ExecEvalConvertRowtype to take
responsibility for inserting the correct rowtype OID label whenever
tupconvert.c decides it need not do anything. This is easily done with
heap_copy_tuple_as_datum, which will be considerably faster than a tuple
disassembly and reassembly anyway; so from a performance standpoint this
change is a win all around compared to what happened in earlier branches.
It just means a couple more lines of code in ExecEvalConvertRowtype.
Ashutosh Bapat and Tom Lane
Discussion: https://postgr.es/m/CAFjFpRfvHABV6+oVvGcshF8rHn+1LfRUhj7Jz1CDZ4gPUwehBg@mail.gmail.com
Add a "copy" argument to make it optional to receive a copy of caller
tuple that is safe to use following a subsequent manipulating of
tuplesort's state. This is a performance optimization. Most existing
tuplesort_gettupleslot() callers are made to opt out of copying.
Existing callers that happen to rely on the validity of tuple memory
beyond subsequent manipulations of the tuplesort request their own
copy.
This brings tuplesort_gettupleslot() in line with
tuplestore_gettupleslot(). In the future, a "copy"
tuplesort_getdatum() argument may be added, that similarly allows
callers to opt out of receiving their own copy of tuple.
In passing, clarify assumptions that callers of other tuplesort fetch
routines may make about tuple memory validity, per gripe from Tom
Lane.
Author: Peter Geoghegan
Discussion: CAM3SWZQWZZ_N=DmmL7tKy_OUjGH_5mN=N=A6h7kHyyDvEhg2DA@mail.gmail.com
The original code was overly optimistic about the cost of scanning a
BRIN index, leading to BRIN indexes being selected when they'd be a
worse choice than some other index. This complete rewrite should be
more accurate.
Author: David Rowley, based on an earlier patch by Emre Hasegeli
Reviewed-by: Emre Hasegeli
Discussion: https://postgr.es/m/CAKJS1f9n-Wapop5Xz1dtGdpdqmzeGqQK4sV2MK-zZugfC14Xtw@mail.gmail.com
When sending a tuple attribute, the previous coding erroneously sent the
length byte before encoding conversion, which would lead to protocol
failures on the receiving side if the length did not match the following
string.
To fix that, use pq_sendcountedtext() for sending tuple attributes,
which takes care of all of that internally. To match the API of
pq_sendcountedtext(), send even text values without a trailing zero byte
and have the receiving end put it in place instead. This matches how
the standard FE/BE protocol behaves.
Reported-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Also add opr_sanity check that all preloaded immutable functions are
parallel safe. (Per discussion, this does not necessarily have to be
true for all possible such functions, but deviations would be unlikely
enough that maintaining such a test is reasonable.)
Reported-by: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
It was not used for what the comment claimed, at all. It was actually used
as the 'base' argument to strtol(), when reading the iteration count. We
don't need a constant for base-10, so remove it.
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
For normal commits and aborts we already reset PgXact->xmin,
so we can simply avoid running SnapshotResetXmin() twice.
During performance tests by Alexander Korotkov, diagnosis
by Andres Freund showed PgXact array as a bottleneck. After
manual analysis by me of the code paths that touch those
memory locations, I was able to identify extraneous code
in the main transaction commit path.
Avoiding touching highly contented shmem improves concurrent
performance slightly on all workloads, confirmed by tests
run by Ashutosh Sharma and Alexander Korotkov.
Simon Riggs
Discussion: CANP8+jJdXE9b+b9F8CQT-LuxxO0PBCB-SZFfMVAdp+akqo4zfg@mail.gmail.com
HandleFunctionRequest() is no longer responsible for reading the protocol
message from the client, since commit 2b3a8b20c2. Fix the outdated
comments.
HandleFunctionRequest() now always returns 0, because the code that used
to return EOF was moved in 2b3a8b20c2. Therefore, the caller no longer
needs to check the return value.
Reported by Andres Freund. Backpatch to all supported versions, even though
this doesn't have any user-visible effect, to make backporting future
patches in this area easier.
Discussion: https://www.postgresql.org/message-id/20170405010525.rt5azbya5fkbhvrx@alap3.anarazel.de
When using integer timestamps, the interval-comparison functions tried
to compute the overall magnitude of an interval as an int64 number of
microseconds. As reported by Frazer McLean, this overflows for intervals
exceeding about 296000 years, which is bad since we nominally allow
intervals many times larger than that. That results in wrong comparison
results, and possibly in corrupted btree indexes for columns containing
such large interval values.
To fix, compute the magnitude as int128 instead. Although some compilers
have native support for int128 calculations, many don't, so create our
own support functions that can do 128-bit addition and multiplication
if the compiler support isn't there. These support functions are designed
with an eye to allowing the int128 code paths in numeric.c to be rewritten
for use on all platforms, although this patch doesn't do that, or even
provide all the int128 primitives that will be needed for it.
Back-patch as far as 9.4. Earlier releases did not guard against overflow
of interval values at all (commit 146604ec4 fixed that), so it seems not
very exciting to worry about overly-large intervals for them.
Before 9.6, we did not assume that unreferenced "static inline" functions
would not draw compiler warnings, so omit functions not directly referenced
by timestamp.c, the only present consumer of int128.h. (We could have
omitted these functions in HEAD too, but since they were written and
debugged on the way to the present patch, and they look likely to be needed
by numeric.c, let's keep them in HEAD.) I did not bother to try to prevent
such warnings in a --disable-integer-datetimes build, though.
Before 9.5, configure will never define HAVE_INT128, so the part of
int128.h that exploits a native int128 implementation is dead code in the
9.4 branch. I didn't bother to remove it, thinking that keeping the file
looking similar in different branches is more useful.
In HEAD only, add a simple test harness for int128.h in src/tools/.
In back branches, this does not change the float-timestamps code path.
That's not subject to the same kind of overflow risk, since it computes
the interval magnitude as float8. (No doubt, when this code was originally
written, overflow was disregarded for exactly that reason.) There is a
precision hazard instead :-(, but we'll avert our eyes from that question,
since no complaints have been reported and that code's deprecated anyway.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/1490104629.422698.918452336.26FA96B7@webmail.messagingengine.com
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282 added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
All error messages use the American English spelling of recognize,
apply to the single one not doing so to be consistent.
Author: Daniel Gustafsson <daniel@yesql.se>
Commit 59702716 added transition table support to PL/pgsql so that
SQL queries in trigger functions could access those transient
tables. In order to provide the same level of support for PL/perl,
PL/python and PL/tcl, refactor the relevant code into a new
function SPI_register_trigger_data. Call the new function in the
trigger handler of all four PLs, and document it as a public SPI
function so that authors of out-of-tree PLs can do the same.
Also get rid of a second QueryEnvironment object that was
maintained by PL/pgsql. That was previously used to deal with
cursors, but the same approach wasn't appropriate for PLs that are
less tangled up with core code. Instead, have SPI_cursor_open
install the connection's current QueryEnvironment, as already
happens for SPI_execute_plan.
While in the docs, remove the note that transition tables were only
supported in C and PL/pgSQL triggers, and correct some ommissions.
Thomas Munro with some work by Kevin Grittner (mostly docs)
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
During allocation VALGRIND_MAKE_MEM_DEFINED was called with a pointer
as size. That kind of works, but makes valgrind exceedingly slow for
workloads involving the slab allocator.
Secondly there was an access to memory marked as unreachable within
SlabCheck(). Fix that too.
Author: Tomas Vondra
Discussion: https://postgr.es/m/a6543b6d-6015-99b1-63ef-3ed55a76a730@2ndquadrant.com
2PC state info held in shmem at PREPARE, then cleaned at COMMIT PREPARED/ABORT PREPARED,
avoiding writing/fsyncing any state information to disk in the normal path, greatly enhancing replay speed.
Prepared transactions that live past one checkpoint redo horizon will be written to disk as now.
Similar conceptually to 978b2f65aa and building upon
the infrastructure created by that commit.
Authors, in equal measure: Stas Kelvich, Nikhil Sontakke and Michael Paquier
Discussion: https://postgr.es/m/CAMGcDxf8Bn9ZPBBJZba9wiyQq-Qk5uqq=VjoMnRnW5s+fKST3w@mail.gmail.com
Fujii Masao
Tom Lane
Heikki Linnakangas
Simon Riggs
Peter Eisentraut
Alvaro Herrera
Robert Haas
Magnus Hagander
Andres Freund
Kevin Grittner
Andrew Dunstan