type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
inheritance child of an UPDATE/DELETE target relation can be excluded by
constraints. I had rearranged some code in set_append_rel_pathlist() to
avoid "useless" work when a child is excluded, but overdid it and left
the child with no cheapest_path entry, causing possible failure later
if the appendrel was involved in a join. Also, it seems that the dummy
plan generated by inheritance_planner() when all branches are excluded
has to be a bit less dummy now than was required in 8.2.
Per report from Jan Wieck. Add his test case to the regression tests.
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
named foo, would work but the other ordering would not. If a user-specified
type or table name collides with an existing auto-generated array name, just
rename the array type out of the way by prepending more underscores. This
should not create any backward-compatibility issues, since the cases in which
this will happen would have failed outright in prior releases.
Also fix an oversight in the arrays-of-composites patch: ALTER TABLE RENAME
renamed the table's rowtype but not its array type.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
search_path that was active when the plan was first made. To do this,
improve namespace.c to support a stack of "override" search path settings
(we must have a stack since nested replan events are entirely possible).
This facility replaces the "special namespace" hack formerly used by
CREATE SCHEMA, and should be able to support per-function search path
settings as well.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
was expecting there to be no regular table named 'foo', but it turns out
the rules test transiently creates one, so that plancache would sometimes
fail. I couldn't reproduce that in quite a few tries here, but several
buildfarm machines have shown the failure. Fix by renaming plancache's
temp table to something nonconflicting.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
currently have any better strategy for this query than re-running the
sub-select over and over; it seems unlikely that doing so 10000 times
is a more useful test than doing it a few dozen times.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
changes (with an upper limit of 30 seconds), and record the delay time in
the postmaster log. This should give us some info about what's happening
with the intermittent stats failures in buildfarm. After an idea of
Andrew Dunstan's.
Neil Conway
Tom Lane
Peter Eisentraut
Bruce Momjian
Magnus Hagander
Tatsuo Ishii
Alvaro Herrera