In a corner case, a btree page was allocated during a clean-up operation
that could cause the tracking of the largest contiguous span of free
space to get out of whack. That was supposed to be prevented by the use
of the "soft" flag to avoid allocating internal pages during incidental
clean-up work, but the flag was ignored in the case where the FPM was
promoted from singleton format to btree format. Repair.
Remove an obsolete comment in passing.
Back-patch to 10, where freepage.c arrived (as support for dsa.c).
Author: Robert Haas
Diagnosed-by: Thomas Munro and Robert Haas
Reported-by: Justin Pryzby, Rick Otten, Sand Stone, Arne Roland and others
Discussion: https://postgr.es/m/CAMAYy4%2Bw3NTBM5JLWFi8twhWK4%3Dk_5L4nV5%2BbYDSPu8r4b97Zg%40mail.gmail.com
We're only going to consider key columns when creating indexquals,
so there is no point in having the outer loops in indxpath.c iterate
further than nkeycolumns.
Doing so in match_pathkeys_to_index() is actually wrong, and would have
caused crashes by now, except that we have no index AMs supporting both
amcanorderbyop and amcaninclude.
It's also wrong in relation_has_unique_index_for(). The effect there is
to fail to prove uniqueness even when the index does prove it, if there
are extra columns.
Also future-proof examine_variable() for the day when extra columns can
be expressions, and fix what's either a thinko or just an oversight in
btcostestimate(): we should consider the number of key columns, not the
total, when deciding whether to derate correlation.
None of these things seemed important enough to risk changing in a
just-before-wrap patch, but since we're past the release wrap window,
time to fix 'em.
Discussion: https://postgr.es/m/25526.1549847928@sss.pgh.pa.us
Ever since its birth, ReorderBufferBuildTupleCidHash() has contained an
assertion that a catalog tuple cannot change Cmax after acquiring one. But
that's wrong: if a subtransaction executes DDL that affects that catalog
tuple, and later aborts and another DDL affects the same tuple, it will
change Cmax. Relax the assertion to merely verify that the Cmax remains
valid and monotonically increasing, instead.
Add a test that tickles the relevant code.
Diagnosed by, and initial patch submitted by: Arseny Sher
Co-authored-by: Arseny Sher
Discussion: https://postgr.es/m/874l9p8hyw.fsf@ars-thinkpad
It's pretty unhelpful to report the wrong file name in a complaint
about syscall failure, but SnapBuildSerialize managed to do that twice
in a span of 50 lines. Also fix half a dozen missing or poorly-chosen
errcode assignments; that's mostly cosmetic, but still wrong.
Noted while studying recent failures on buildfarm member nightjar.
I'm not sure whether those reports are actually giving the wrong
filename, because there are two places here with identically
spelled error messages. The other one is specifically coded not
to report ENOENT, but if it's this one, how could we be getting
ENOENT from open() with O_CREAT? Need to sit back and await results.
However, these ereports are clearly broken from birth, so back-patch.
partprune.h failed to compile by itself; needs to include partdefs.h.
I think I must've broken this in fa2cf164a, though I'd swear I ran
the appropriate tests when removing #includes. Anyway, it's very
sensible for this file to include partdefs.h, so let's just do that.
Per cpluspluscheck.
The current wording can confuse the reader about constraint exclusion
being available at query execution, but this only applies to partition
pruning.
Reported-by: Shouyu Luo
Author: David Rowley
Reviewed-by: Chapman Flack, Amit Langote
Discussion: https://postgr.es/m/15629-2ef8b22e61f8333f@postgresql.org
For a long time, indxpath.c has had the ability to extract derived (lossy)
index conditions from certain operators such as LIKE. For just as long,
it's been obvious that we really ought to make that capability available
to extensions. This commit finally accomplishes that, by adding another
API for planner support functions that lets them create derived index
conditions for their functions. As proof of concept, the hardwired
"special index operator" code formerly present in indxpath.c is pushed
out to planner support functions attached to LIKE and other relevant
operators.
A weak spot in this design is that an extension needs to know OIDs for
the operators, datatypes, and opfamilies involved in the transformation
it wants to make. The core-code prototypes use hard-wired OID references
but extensions don't have that option for their own operators etc. It's
usually possible to look up the required info, but that may be slow and
inconvenient. However, improving that situation is a separate task.
I want to do some additional refactorization around selfuncs.c, but
that also seems like a separate task.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
The original setup for dependencies of partitioned objects had
serious problems:
1. It did not verify that a drop cascading to a partition-child object
also cascaded to at least one of the object's partition parents. Now,
normally a child object would share all its dependencies with one or
another parent (e.g. a child index's opclass dependencies would be shared
with the parent index), so that this oversight is usually harmless.
But if some dependency failed to fit this pattern, the child could be
dropped while all its parents remain, creating a logically broken
situation. (It's easy to construct artificial cases that break it,
such as attaching an unrelated extension dependency to the child object
and then dropping the extension. I'm not sure if any less-artificial
cases exist.)
2. Management of partition dependencies during ATTACH/DETACH PARTITION
was complicated and buggy; for example, after detaching a partition
table it was possible to create cases where a formerly-child index
should be dropped and was not, because the correct set of dependencies
had not been reconstructed.
Less seriously, because multiple partition relationships were
represented identically in pg_depend, there was an order-of-traversal
dependency on which partition parent was cited in error messages.
We also had some pre-existing order-of-traversal hazards for error
messages related to internal and extension dependencies. This is
cosmetic to users but causes testing problems.
To fix#1, add a check at the end of the partition tree traversal
to ensure that at least one partition parent got deleted. To fix#2,
establish a new policy that partition dependencies are in addition to,
not instead of, a child object's usual dependencies; in this way
ATTACH/DETACH PARTITION need not cope with adding or removing the
usual dependencies.
To fix the cosmetic problem, distinguish between primary and secondary
partition dependency entries in pg_depend, by giving them different
deptypes. (They behave identically except for having different
priorities for being cited in error messages.) This means that the
former 'I' dependency type is replaced with new 'P' and 'S' types.
This also fixes a longstanding bug that after handling an internal
dependency by recursing to the owning object, findDependentObjects
did not verify that the current target was now scheduled for deletion,
and did not apply the current recursion level's objflags to it.
Perhaps that should be back-patched; but in the back branches it
would only matter if some concurrent transaction had removed the
internal-linkage pg_depend entry before the recursive call found it,
or the recursive call somehow failed to find it, both of which seem
unlikely.
Catversion bump because the contents of pg_depend change for
partitioning relationships.
Patch HEAD only. It's annoying that we're not fixing #2 in v11,
but there seems no practical way to do so given that the problem
is exactly a poor choice of what entries to put in pg_depend.
We can't really fix that while staying compatible with what's
in pg_depend in existing v11 installations.
Discussion: https://postgr.es/m/CAH2-Wzkypv1R+teZrr71U23J578NnTBt2X8+Y=Odr4pOdW1rXg@mail.gmail.com
indxpath.c needs a good deal more attention for covering indexes than
it's gotten. But so far as I can tell, the only really awful breakage
is in expand_indexqual_rowcompare (nee adjust_rowcompare_for_index),
which was only half fixed in c266ed31a. The other problems aren't
bad enough to take the risk of a just-before-wrap fix.
The problem here is that if the leading column of a row comparison
matches an index (allowing this code to be reached), and some later
column doesn't match the index, it'll nonetheless believe that that
column matches the first included index column. Typically that'll
lead to an error like "operator M is not a member of opfamily N" as
a result of fetching a garbage opfamily OID. But with enough bad
luck, maybe a broken plan would be generated.
Discussion: https://postgr.es/m/25526.1549847928@sss.pgh.pa.us
It seems useful to have this information available, so that it's
easier to tell when a test script is taking a disproportionate
amount of time.
Discussion: https://postgr.es/m/16646.1549770618@sss.pgh.pa.us
After commit 123cc697a8, we remove redundant FK action triggers during
partition ATTACH by merely deleting the catalog tuple, but that's wrong:
it should use performDeletion() instead. Repair, and make the comments
more explicit.
Per code review from Tom Lane.
Discussion: https://postgr.es/m/18885.1549642539@sss.pgh.pa.us
Renaming varchar_transform to varchar_support had a side effect
I hadn't foreseen: the core regression tests leave around a
transform object that relies on that function, so the name
change breaks cross-version upgrade tests, because the name
used in the older branches doesn't match.
Since the dependency on varchar_transform was chosen with the
aid of a dartboard anyway (it would surely not work as a
language transform support function), fix by just choosing
a different random builtin function with the right signature.
Also add some comments explaining why this isn't horribly unsafe.
I chose to make the same substitution in a couple of other
copied-and-pasted test cases, for consistency, though those
aren't directly contributing to the testing problem.
Per buildfarm. Back-patch, else it doesn't fix the problem.
warn_or_exit_horribly() was blithely passing a potentially-NULL
string pointer to a %s format specifier. That works (at least
to the extent of not crashing) on some platforms, but not all,
and since we switched to our own snprintf.c it doesn't work
for us anywhere.
Of the three string fields being handled this way here, I think
that only "owner" is supposed to be nullable ... but considering
that this is error-reporting code, it has very little business
assuming anything, so put in defenses for all three.
Per a crash observed on buildfarm member crake and then
reproduced here. Because of the portability aspect,
back-patch to all supported versions.
Add support function requests for estimating the selectivity, cost,
and number of result rows (if a SRF) of the target function.
The lack of a way to estimate selectivity of a boolean-returning
function in WHERE has been a recognized deficiency of the planner
since Berkeley days. This commit finally fixes it.
In addition, non-constant estimates of cost and number of output
rows are now possible. We still fall back to looking at procost
and prorows if the support function doesn't service the request,
of course.
To make concrete use of the possibility of estimating output rowcount
for SRFs, this commit adds support functions for array_unnest(anyarray)
and the integer variants of generate_series; the lack of plausible
rowcount estimates for those, even when it's obvious to a human,
has been a repeated subject of complaints. Obviously, much more
could now be done in this line, but I'm mostly just trying to get
the infrastructure in place.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Rename/repurpose pg_proc.protransform as "prosupport". The idea is
still that it names an internal function that provides knowledge to
the planner about the behavior of the function it's attached to;
but redesign the API specification so that it's not limited to doing
just one thing, but can support an extensible set of requests.
The original purpose of simplifying a function call is handled by
the first request type to be invented, SupportRequestSimplify.
Adjust all the existing transform functions to handle this API,
and rename them fron "xxx_transform" to "xxx_support" to reflect
the potential generalization of what they do. (Since we never
previously provided any way for extensions to add transform functions,
this change doesn't create an API break for them.)
Also add DDL and pg_dump support for attaching a support function to a
user-defined function. Unfortunately, DDL access has to be restricted
to superusers, at least for now; but seeing that support functions
will pretty much have to be written in C, that limitation is just
theoretical. (This support is untested in this patch, but a follow-on
patch will add cases that exercise it.)
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
In place of three separate but interrelated lists (indexclauses,
indexquals, and indexqualcols), an IndexPath now has one list
"indexclauses" of IndexClause nodes. This holds basically the same
information as before, but in a more useful format: in particular, there
is now a clear connection between an indexclause (an original restriction
clause from WHERE or JOIN/ON) and the indexquals (directly usable index
conditions) derived from it.
We also change the ground rules a bit by mandating that clause commutation,
if needed, be done up-front so that what is stored in the indexquals list
is always directly usable as an index condition. This gets rid of repeated
re-determination of which side of the clause is the indexkey during costing
and plan generation, as well as repeated lookups of the commutator
operator. To minimize the added up-front cost, the typical case of
commuting a plain OpExpr is handled by a new special-purpose function
commute_restrictinfo(). For RowCompareExprs, generating the new clause
properly commuted to begin with is not really any more complex than before,
it's just different --- and we can save doing that work twice, as the
pretty-klugy original implementation did.
Tracking the connection between original and derived clauses lets us
also track explicitly whether the derived clauses are an exact or lossy
translation of the original. This provides a cheap solution to getting
rid of unnecessary rechecks of boolean index clauses, which previously
seemed like it'd be more expensive than it was worth.
Another pleasant (IMO) side-effect is that EXPLAIN now always shows
index clauses with the indexkey on the left; this seems less confusing.
This commit leaves expand_indexqual_conditions() and some related
functions in a slightly messy state. I didn't bother to change them
any more than minimally necessary to work with the new data structure,
because all that code is going to be refactored out of existence in
a follow-on patch.
Discussion: https://postgr.es/m/22182.1549124950@sss.pgh.pa.us
The previous ordering of these steps satisfied the nominal requirement
that set_rel_pathlist_hook could editorialize on the whole set of Paths
constructed for a base relation. In practice, though, trying to change
the set of partial paths was impossible. Adding one didn't work because
(a) it was too late to be included in Gather paths made by the core code,
and (b) calling add_partial_path after generate_gather_paths is unsafe,
because it might try to delete a path it thinks is dominated, but that
is already embedded in some Gather path(s). Nor could the hook safely
remove partial paths, for the same reason that they might already be
embedded in Gathers.
Better to call extensions first, let them add partial paths as desired,
and then gather. In v11 and up, we already doubled down on that ordering
by postponing gathering even further for single-relation queries; so even
if the hook wished to editorialize on Gather path construction, it could
not.
Report and patch by KaiGai Kohei. Back-patch to 9.6 where Gather paths
were added.
Discussion: https://postgr.es/m/CAOP8fzahwpKJRTVVTqo2AE=mDTz_efVzV6Get_0=U3SO+-ha1A@mail.gmail.com
The comment marker "#" is copied to the output, so it's only
appropriate for comments that make sense in the shell output. For
comments about the Autoconf language, "dnl" should be used.
This has the advantage that the comparator expression, the table's
slot, etc do not have to be rebuilt. Additionally the simplehash.h
hashtable within the tuple hashtable now keeps its previous size and
doesn't need to be reallocated. That both reduces allocator overhead,
and improves performance in cases where the input estimation was off
by a significant factor.
To avoid an API/ABI break, the new parameter is exposed via the new
BuildTupleHashTableExt(), and BuildTupleHashTable() now is a wrapper
around the former, that continues to allocate the table itself in the
tablecxt.
Using this fixes performance issues discovered in the two bugs
referenced. This commit however has not converted the callers, that's
done in a separate commit.
Bug: #15592#15486
Reported-By: Jakub Janeček, Dmitry Marakasov
Author: Andres Freund
Discussion:
https://postgr.es/m/15486-05850f065da42931@postgresql.orghttps://postgr.es/m/20190114180423.ywhdg2iagzvh43we@alap3.anarazel.de
Backpatch: 11, this is a prerequisite for other fixes
In bf6c614a2f I added a expr context to evaluate the grouping
expression. Unfortunately the code I added initialized them while in
the calling context, rather the table context. Additionally, I used
CreateExprContext() rather than CreateStandaloneExprContext(), which
creates the econtext in the estate's query context.
Fix that by using CreateStandaloneExprContext when in the table's
tablecxt. As we rely on the memory being freed by a memory context
reset that means that the econtext's shutdown callbacks aren't being
called, but that seems ok as the expressions are tightly controlled
due to ExecBuildGroupingEqual().
Bug: #15592
Reported-By: Dmitry Marakasov
Author: Andres Freund
Discussion: https://postgr.es/m/20190114222838.h6r3fuyxjxkykf6t@alap3.anarazel.de
Backpatch: 11, where I broke this in bf6c614a2f
While this isn't really supposed to happen, it can occur in OOM
situations and perhaps others. Instead of crashing, substitute
"(no message provided)".
I didn't worry about localizing this text, since we aren't
localizing anything else here; besides, if we're on the edge of
OOM, it's unlikely gettext() would work.
Report and fix by Sergio Conde Gómez in bug #15624.
Discussion: https://postgr.es/m/15624-4dea54091a2864e6@postgresql.org
In case of a reload, we just want to LOG errors instead of FATAL when
processing SSL configuration, but the more recent code for the
ssl_*_protocol_version settings didn't behave like that.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This is useful when looking at partition trees with multiple layers, and
combined with pg_partition_tree, it provides the possibility to show up
an entire tree by just knowing one member at any level.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Amit Langote
Discussion: https://postgr.es/m/20181207014015.GP2407@paquier.xyz
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
The modules RewindTest.pm and ServerSetup.pm are really only useful for
TAP tests, so they really belong in the TAP test directories. In
addition, ServerSetup.pm is renamed to SSLServer.pm.
The test scripts have their own directories added to the search path so
that the relocated modules will be found, regardless of where the tests
are run from, even on modern perl where "." is no longer in the
searchpath.
Discussion: https://postgr.es/m/e4b0f366-269c-73c3-9c90-d9cb0f4db1f9@2ndQuadrant.com
Backpatch as appropriate to 9.5
In commit f16241bef7, we have changed the behavior for concurrent updates
that move row to a different partition, but forgot to update the docs.
Previously when an UPDATE command causes a row to move from one partition
to another, there is a chance that another concurrent UPDATE or DELETE
misses this row. However, now we raise a serialization failure error in
such a case.
Reported-by: David Rowley
Author: David Rowley and Amit Kapila
Backpatch-through: 11 where it was introduced
Discussion: https://postgr.es/m/CAKJS1f-iVhGD4-givQWpSROaYvO3c730W8yoRMTF9Gc3craY3w@mail.gmail.com
This enforces one-or-more character matches in the regular expressions
for pg_dump testing on SQL syntax output where zero-or-more matches
implies a syntax error.
Author: Daniel Gustafsson
Reviewed-by: David G. Johnston, Michael Paquier
Discussion: https://postgr.es/m/B313C32C-0E24-4AFB-95FF-6DA0C4E18A89@yesql.se
The relation creation is done at executor startup, however the main
regression test suite is lacking scenarios where no data is inserted
which is something that can happen when using EXECUTE or EXPLAIN with
CREATE TABLE AS and WITH NO DATA.
Some patches are worked on to reshape the way CTAS relations are
created, so this makes sure that we do not miss some query patterns
already supported.
Reported-by: Andreas Karlsson
Author: Michael Paquier
Reviewed-by: Andreas Karlsson
Discussion: https://postgr.es/m/20190206091817.GB14980@paquier.xyz
The previous tacit assumption that index_form_tuple() hides differences
in the TOAST state of its input datums was wrong. Normalize input
varlena datums by decompressing compressed values, and forming a new
index tuple for fingerprinting using uncompressed inputs. The final
normalized representation may actually be compressed once again within
index_form_tuple(), though that shouldn't matter. When the original
tuple is found to have no datums that are compressed inline, fingerprint
the original tuple directly.
Normalization avoids false positive reports of corruption in certain
cases. For example, the executor can apply toasting with some inline
compression to an entire heap tuple because its input has a single
external TOAST pointer. Varlena datums for other attributes that are
not particularly good candidates for inline compression can be
compressed in the heap tuple in passing, without the representation of
the same values in index tuples ever receiving concomitant inline
compression.
Add a test case to recreate the issue in a simpler though less realistic
way: by exploiting differences in pg_attribute.attstorage between heap
and index relations.
This bug was discovered by me during testing of an upcoming set of nbtree
enhancements. It was also independently reported by Andreas Kunert, as
bug #15597. His test case was rather more realistic than the one I
ended up using.
Bug: #15597
Discussion: https://postgr.es/m/CAH2-WznrVd9ie+TTJ45nDT+v2nUt6YJwQrT9SebCdQKtAvfPZw@mail.gmail.com
Discussion: https://postgr.es/m/15597-294e5d3e7f01c407@postgresql.org
Backpatch: 11-, where heapallindexed verification was introduced.
create_lateral_join_info() computes a bunch of information about lateral
references between base relations, and then attempts to propagate those
markings to appendrel children of the original base relations. But the
original coding neglected the possibility of indirect descendants
(grandchildren etc). During v11 development we noticed that this was
wrong for partitioned-table cases, but failed to realize that it was just
as wrong for any appendrel. While the case can't arise for appendrels
derived from traditional table inheritance (because we make a flat
appendrel for that), nested appendrels can arise from nested UNION ALL
subqueries. Failure to mark the lower-level relations as having lateral
references leads to confusion in add_paths_to_append_rel about whether
unparameterized paths can be built. It's not very clear whether that
leads to any user-visible misbehavior; the lack of field reports suggests
that it may cause nothing worse than minor cost misestimation. Still,
it's a bug, and it leads to failures of Asserts that I intend to add
later.
To fix, we need to propagate information from all appendrel parents,
not just those that are RELOPT_BASERELs. We can still do it in one
pass, if we rely on the append_rel_list to be ordered with ancestor
relationships before descendant ones; add assertions checking that.
While fixing this, we can make a small performance improvement by
traversing the append_rel_list just once instead of separately for
each appendrel parent relation.
Noted while investigating bug #15613, though this patch does not fix
that (which is why I'm not committing the related Asserts yet).
Discussion: https://postgr.es/m/3951.1549403812@sss.pgh.pa.us
Commit f83419b739 failed to notice that mkvcbuild.pl and build.pl use
different searchpath and do-file logic, breaking the latter, so it is
adjusted to use the same logic as mkvcbuild.pl.
Previously heap_getattr() returned NULL for attributes with a fast
default value (c.f. 16828d5c02), as it had no handling whatsoever
for that case.
A previous fix, 7636e5c60f, attempted to fix issues caused by this
oversight, but just expanding OLD tuples for triggers doesn't actually
solve the underlying issue.
One known consequence of this bug is that the check for HOT updates
can return the wrong result, when a previously fast-default'ed column
is set to NULL. Which in turn means that an index over a column with
fast default'ed columns might be corrupt if the underlying column(s)
allow NULLs.
Fix by handling fast default columns in heap_getattr(), remove now
superfluous expansion in GetTupleForTrigger().
Author: Andres Freund
Discussion: https://postgr.es/m/20190201162404.onngi77f26baem4g@alap3.anarazel.de
Backpatch: 11, where fast defaults were introduced
Some tests have been using regular expressions which have been lax in
escaping dots, which may cause tests to pass when they should not. This
make the whole set of tests more robust where needed.
Author: David Rowley
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f9jD8aVo1BTH+Vgwd=f-ynbuRVrS90XbWMT6UigaOQJTA@mail.gmail.com
Contrary to the comment on 772d4b76, only paths starting with "./" or
"../" are considered relative to the current working directory by perl's
"do" function. So this patch converts all the relevant cases to use "./"
paths. This only affects MSVC.
Backpatch to all live branches.