We have been seeing intermittent buildfarm failures due to a query
sometimes not using an index-only scan plan, because a background
auto-ANALYZE prevented the table's all-visible bits from being set
immediately, thereby causing the estimated cost of an index-only scan
to go up considerably. Adjust the test case so that a bitmap index scan is
preferred instead, which serves equally well for the purpose the test case
is actually meant for. (Of course, it would be better to eliminate the
interference from auto-ANALYZE, but I see no low-risk way to do that,
so any such fix will have to be left for 9.3 or later.)
setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery. That was never possible before writable CTEs, of
course, but now it's broken. The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.
Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment. Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists. (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with. But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)
Back-patch to 9.1, where the problem became possible to hit.
Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.
Per report by Jaime Casanova and subsequent discussion.
Instead of an exact cost comparison, use a fuzzy comparison with 1e-10
delta after all other path metrics have proved equal. This is to avoid
having platform-specific roundoff behaviors determine the choice when
two paths are really the same to our cost estimators. Adjust the
recently-added test case that made it obvious we had a problem here.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
We should be willing to cross-join two small relations if that allows us
to use an inner indexscan on a large relation (that is, the potential
indexqual for the large table requires both smaller relations). This
worked in simple cases but fell apart as soon as there was a join clause
to a fourth relation, because the existence of any two-relation join clause
caused the planner to not consider clauseless joins between other base
relations. The added regression test shows an example case adapted from
a recent complaint from Benoit Delbosc.
Adjust have_relevant_joinclause, have_relevant_eclass_joinclause, and
has_relevant_eclass_joinclause to consider that a join clause mentioning
three or more relations is sufficient grounds for joining any subset of
those relations, even if we have to do so via a cartesian join. Since such
clauses are relatively uncommon, this shouldn't affect planning speed on
typical queries; in fact it should help a bit, because the latter two
functions in particular get significantly simpler.
Although this is arguably a bug fix, I'm not going to risk back-patching
it, since it might have currently-unforeseen consequences.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
The parser got confused if a cursor parameter had the same name as
a plpgsql variable. Reported and diagnosed by Yeb Havinga, though
this isn't exactly his proposed fix.
Also, some mostly-but-not-entirely-cosmetic adjustments to the original
named-cursor-parameter patch, for code readability and better error
diagnostics.
The COPY documentation says "COPY FROM matches the input against the null
string before removing backslashes". It is therefore reasonable to presume
that null markers like E'\\0' will work ... and they did, until someone put
the tests in the wrong order during microoptimization-driven rewrites.
Since then, we've been failing if the null marker is something that would
de-escape to an invalidly-encoded string. Since null markers generally
need to be something that can't appear in the data, this represents a
nontrivial loss of functionality; surprising nobody noticed it earlier.
Per report from Jeff Davis. Backpatch to 8.4 where this got broken.
For some reason, in the original coding of the PlaceHolderVar mechanism
I had supposed that PlaceHolderVars couldn't propagate into subqueries.
That is of course entirely possible. When it happens, we need to treat
an outer-level PlaceHolderVar much like an outer Var or Aggref, that is
SS_replace_correlation_vars() needs to replace the PlaceHolderVar with
a Param, and then when building the finished SubPlan we have to provide
the PlaceHolderVar expression as an actual parameter for the SubPlan.
The handling of the contained expression is a bit delicate but it can be
treated exactly like an Aggref's expression.
In addition to the missing logic in subselect.c, prepjointree.c was failing
to search subqueries for PlaceHolderVars that need their relids adjusted
during subquery pullup. It looks like everyplace else that touches
PlaceHolderVars got it right, though.
Per report from Mark Murawski. In 9.1 and HEAD, queries affected by this
oversight would fail with "ERROR: Upper-level PlaceHolderVar found where
not expected". But in 9.0 and 8.4, you'd silently get possibly-wrong
answers, since the value transmitted into the subquery wouldn't go to null
when it should.
Fix loss of previous expression-simplification work when a transform
function fires: we must not simply revert to untransformed input tree.
Instead build a dummy FuncExpr node to pass to the transform function.
This has the additional advantage of providing a simpler, more uniform
API for transform functions.
Move documentation to a somewhat less buried spot, relocate some
poorly-placed code, be more wary of null constants and invalid typmod
values, add an opr_sanity check on protransform function signatures,
and some other minor cosmetic adjustments.
Note: although this patch touches pg_proc.h, no need for catversion
bump, because the changes are cosmetic and don't actually change the
intended catalog contents.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
When converting source files, pg_regress' inputdir and outputdir options were
ignored when computing the locations of the destination files. In consequence,
these options were effectively unusable when the regression inputs need to
be adjusted by pg_regress. This patch makes pg_regress put the converted files
in the same place that these options specify non-converted input or results
files are to be found. Backpatched to all live branches.
In commit 57664ed25e I tried to fix a bug
reported by Teodor Sigaev by making non-simple-Var output columns distinct
(by wrapping their expressions with dummy PlaceHolderVar nodes). This did
not work too well. Commit b28ffd0fcc fixed
some ensuing problems with matching to child indexes, but per a recent
report from Claus Stadler, constraint exclusion of UNION ALL subqueries was
still broken, because constant-simplification didn't handle the injected
PlaceHolderVars well either. On reflection, the original patch was quite
misguided: there is no reason to expect that EquivalenceClass child members
will be distinct. So instead of trying to make them so, we should ensure
that we can cope with the situation when they're not.
Accordingly, this patch reverts the code changes in the above-mentioned
commits (though the regression test cases they added stay). Instead, I've
added assorted defenses to make sure that duplicate EC child members don't
cause any problems. Teodor's original problem ("MergeAppend child's
targetlist doesn't match MergeAppend") is addressed more directly by
revising prepare_sort_from_pathkeys to let the parent MergeAppend's sort
list guide creation of each child's sort list.
In passing, get rid of add_sort_column; as far as I can tell, testing for
duplicate sort keys at this stage is dead code. Certainly it doesn't
trigger often enough to be worth expending cycles on in ordinary queries.
And keeping the test would've greatly complicated the new logic in
prepare_sort_from_pathkeys, because comparing pathkey list entries against
a previous output array requires that we not skip any entries in the list.
Back-patch to 9.1, like the previous patches. The only known issue in
this area that wasn't caused by the ill-advised previous patches was the
MergeAppend planning failure, which of course is not relevant before 9.1.
It's possible that we need some of the new defenses against duplicate child
EC entries in older branches, but until there's some clear evidence of that
I'm going to refrain from back-patching further.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
The only reason this didn't work before was that parserOpenTable()
rejects composite types. So use relation_openrv() directly and
manually do the errposition() setup that parserOpenTable() does.
This effectively reverts 7886cc73ad,
which was done under the impression that isolationtester needs libpq,
which it no longer does (and never really did).
It's not necessary and can only create confusion about which libpq
installation should be used.
Also remove some dead code from the makefile that was apparently
copied from elsewhere.
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
First, as noted by Itagaki Takahiro, a datum of type JSON doesn't
need to be escaped. Second, ensure that numeric output not in
the form of a legal JSON number is quoted and escaped.
The syntax "\n*", that is a backref with a * quantifier directly applied
to it, has never worked correctly in Spencer's library. This has been an
open bug in the Tcl bug tracker since 2005:
https://sourceforge.net/tracker/index.php?func=detail&aid=1115587&group_id=10894&atid=110894
The core of the problem is in parseqatom(), which first changes "\n*" to
"\n+|" and then applies repeat() to the NFA representing the backref atom.
repeat() thinks that any arc leading into its "rp" argument is part of the
sub-NFA to be repeated. Unfortunately, since parseqatom() already created
the arc that was intended to represent the empty bypass around "\n+", this
arc gets moved too, so that it now leads into the state loop created by
repeat(). Thus, what was supposed to be an "empty" bypass gets turned into
something that represents zero or more repetitions of the NFA representing
the backref atom. In the original example, in place of
^([bc])\1*$
we now have something that acts like
^([bc])(\1+|[bc]*)$
At runtime, the branch involving the actual backref fails, as it's supposed
to, but then the other branch succeeds anyway.
We could no doubt fix this by some rearrangement of the operations in
parseqatom(), but that code is plenty ugly already, and what's more the
whole business of converting "x*" to "x+|" probably needs to go away to fix
another problem I'll mention in a moment. Instead, this patch suppresses
the *-conversion when the target is a simple backref atom, leaving the case
of m == 0 to be handled at runtime. This makes the patch in regcomp.c a
one-liner, at the cost of having to tweak cbrdissect() a little. In the
event I went a bit further than that and rewrote cbrdissect() to check all
the string-length-related conditions before it starts comparing characters.
It seems a bit stupid to possibly iterate through many copies of an
n-character backreference, only to fail at the end because the target
string's length isn't a multiple of n --- we could have found that out
before starting. The existing coding could only be a win if integer
division is hugely expensive compared to character comparison, but I don't
know of any modern machine where that might be true.
This does not fix all the problems with quantified back-references. In
particular, the code is still broken for back-references that appear within
a larger expression that is quantified (so that direct insertion of the
quantification limits into the BACKREF node doesn't apply). I think fixing
that will take some major surgery on the NFA code, specifically introducing
an explicit iteration node type instead of trying to transform iteration
into concatenation of modified regexps.
Back-patch to all supported branches. In HEAD, also add a regression test
case for this. (It may seem a bit silly to create a regression test file
for just one test case; but I'm expecting that we will soon import a whole
bunch of regex regression tests from Tcl, so might as well create the
infrastructure now.)
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
Per buildfarm, we sometimes get row-ordering variations in the output.
This also makes this query look more like numerous other ones in the same
test file.
Since bool_and() is equivalent to min(), and bool_or() to max(), we might
as well let them be index-optimized in the same way. The practical value
of this is debatable at best, but it seems nearly cost-free to enable it.
Code-wise, we need only adjust the entries in pg_aggregate. There is a
measurable planning speed penalty for a query involving one of these
aggregates, but it is only a few percent in simple cases, so that seems
acceptable.
Marti Raudsepp, reviewed by Abhijit Menon-Sen
When written, textanycat, anytextcat, quote_literal, and quote_nullable
were marked volatile, because they could invoke arbitrary type-specific
output functions as part of casting their anyelement arguments to text.
Since then, we have defined a project policy that I/O functions must not
be volatile, as per commit aab353a60b.
So these functions can safely be downgraded to stable. Most of the time
this makes no difference since they'll get inlined anyway, but as noted
by Andrew Dunstan, there are cases where the volatile marking prevents
optimizations that the planner does before function inlining. (I think
I might have overlooked these functions in the earlier commit on the
grounds that inlining would make it moot, but not so --- tgl)
This change results in a change in the expected output of the json
regression tests, because the planner can now flatten a sub-select
that it failed to before. The old output is preferable, but getting
that back will require some as-yet-unfinished work on RowExpr handling.
Marti Raudsepp
Use a target-specific variable to add to CPPFLAGS instead of writing a
custom .c -> .o rule. This will ensure that dependency tracking is
used when enabled.
This reverts commit 500cf66d55. As was
more or less expected, a small minority of platforms won't accept
denormalized input even with the recent changes. It doesn't seem
especially helpful to test this if we're going to have to provide an
alternate expected-file to allow failure.
This was submitted with the previous patch, but I'm committing it
separately to ease backing it out if these results prove too unportable.
Marti Raudsepp, after a proposal by Jeroen Vermeulen
Don't quote the output of format_procedure(); it's already quoted quite
enough. Remove the fn_name field, which was now just dead weight. Fix
remaining expected-output files.
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
In commit 57664ed25e, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
Formerly we passed an empty list to each per-child-table invocation of
grouping_planner, and then merged the results into the global list.
However, that fails if there's a CTE attached to the statement, because
create_ctescan_plan uses the list to find the plan referenced by a CTE
reference; so it was unable to find any CTEs attached to the outer UPDATE
or DELETE. But there's no real reason not to use the same list throughout
the process, and doing so is simpler and faster anyway.
Per report from Josh Berkus of "could not find plan for CTE" failures.
Back-patch to 9.1 where we added support for WITH attached to UPDATE or
DELETE. Add some regression test cases, too.
Much more could be done here, but at least now we have *some* automated
test coverage of that mechanism. In particular this tests the writable-CTE
case reported by Phil Sorber.
In passing, remove isolationtester's arbitrary restriction on the number of
steps in a permutation list. I used this so that a single spec file could
be used to run several related test scenarios, but there are other possible
reasons to want a step series that's not exactly a permutation. Improve
documentation and fix a couple other nits as well.
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
We now use the same error message for ALTER TABLE .. ADD COLUMN or
ALTER TABLE .. RENAME COLUMN that we do for CREATE TABLE. The old
message was accurate, but might be confusing to users not aware of our
system columns.
Vik Reykja, with some changes by me, and further proofreading by Tom Lane
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Rip out a regression test that doesn't play well with settings put in
place by the build farm, and rewrite the code in CheckIndexCompatible
in a hopefully more transparent style.
This enables a bunch of features, notably ON_ERROR_ROLLBACK. It also
makes COPY failure (either in the server or psql) as a whole behave more
sanely in psql.
Additionally, having more commands in the same command line as COPY
works better (though since psql splits lines at semicolons, this doesn't
matter much unless you're using -c).
Also tighten a couple of switches on PQresultStatus() to add
PGRES_COPY_BOTH support and stop assuming that unknown statuses received
are errors; have those print diagnostics where warranted.
Author: Noah Misch
This gives up the "don't rewrite the index" behavior in a couple of
relatively unimportant cases, such as changing between an array type
and an unconstrained domain over that array type, in return for
making this code more future-proof.
Noah Misch
This reports the depth level of triggers currently in execution, or zero
if not called from inside a trigger.
No catversion bump in this patch, but you have to initdb if you want
access to the new function.
Author: Kevin Grittner
Drop the role we create, so regression tests pass even when run more
than once against the same cluster, a problem noted by Tom Lane and
Jeff Janes. Also, rename the temporary role so that it starts with
"regress_", to make it unlikely that we'll collide with an existing
role name while running "make installcheck", per further gripe from
Tom Lane.
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
isolationtester is now able to continue running other permutations when
it detects that one of them is invalid, which is useful during initial
development of spec files.
Author: Alexander Shulgin
The originally-chosen test case gives different results in es_EC locale
because of unusual rule for sorting strings beginning with "LL". Adjust
the comparison value to avoid that, while hopefully not introducing new
locale dependencies elsewhere. Per report from Jaime Casanova.
A permutation that specifies more steps than defined causes
isolationtester to crash, so avoid that. Using less steps than defined
should probably not be a problem, but no spec currently does that.
The original implementation of this interpreted it as a kind of
"inheritance" facility and named all the internal structures
accordingly. This turned out to be very confusing, because it has
nothing to do with the INHERITS feature. So rename all the internal
parser infrastructure, update the comments, adjust the error messages,
and split up the regression tests.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
Because coerce_type recurses into the argument of a CollateExpr,
coerce_to_target_type's longstanding code for detecting whether coerce_type
had actually done anything (to wit, returned a different node than it
passed in) was broken in 9.1. This resulted in unexpected failures in
hide_coercion_node; which was not the latter's fault, since it's critical
that we never call it on anything that wasn't inserted by coerce_type.
(Else we might decide to "hide" a user-written function call.)
Fix by removing and replacing the CollateExpr in coerce_to_target_type
itself. This is all pretty ugly but I don't immediately see a way to make
it nicer.
Per report from Jean-Yves F. Barbier.
The original test cases gave varying results depending on whether the
locale sorts digits before or after letters. Since that's not really
what we wish to test here, adjust the test data to not contain any strings
beginning with digits. Per report from Pavel Stehule.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
You could already rename domains using ALTER TYPE, but with this new
command it is more consistent with how other commands treat domains as
a subcategory of types.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
Operator classes can specify whether or not they support this; this
preserves the flexibility to use lossy representations within an index.
In passing, move constant data about a given index into the rd_amcache
cache area, instead of doing fresh lookups each time we start an index
operation. This is mainly to try to make sure that spgcanreturn() has
insignificant cost; I still don't have any proof that it matters for
actual index accesses. Also, get rid of useless copying of FmgrInfo
pointers; we can perfectly well use the relcache's versions in-place.
These entries could never be matched to an index clause because they don't
have the index datatype on the left-hand side of the operator. (Their
commutators are in the opclass, which is sensible, but that doesn't mean
these operators should be.) Spotted by a test that I recently added to
opr_sanity to catch exactly this type of thinko. AFAICT there is no code
in gistproc.c that is specifically meant to cover these cases, so nothing
to remove at that level.
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b212, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
This should make it easier to identify which row is problematic when an
insert or update is processing many rows.
The formatting is similar to that for unique-index violation messages,
except that we limit field widths to 64 bytes since otherwise the message
could get unreasonably long. (In particular, there's currently no attempt
to quote or escape field values that contain commas etc.)
Jan Kundrát, reviewed by Royce Ausburn, somewhat rewritten by me.
In the original implementation, a range-contained-by search had to scan
the entire index because an empty range could be lurking anywhere.
Improve that by adding a flag to upper GiST entries that says whether the
represented subtree contains any empty ranges.
Also, make a simple mod to the penalty function to discourage empty ranges
from getting pushed into subtrees without any. This needs more work, and
the picksplit function should be taught about it too, but that code can be
improved without causing an on-disk compatibility break; so we'll leave it
for another day.
Since we're breaking on-disk compatibility of range values anyway, I took
the opportunity to reorganize the range flags bits; the unused
RANGE_xB_NULL bits are now adjacent, which might open the door for using
them in some other way later.
In passing, remove the GiST range opclass entry for <>, which doesn't seem
like it can really be indexed usefully.
Alexander Korotkov, with some editorializing by Tom
It runs the regression tests, runs pg_upgrade on the populated
database, and compares the before and after dumps. While not actually
a cross-version upgrade, this does detect omissions and bugs in the
involved tools from time to time. It's also possible to do a
cross-version upgrade by manually supplying parameters.
Per discussion, the zero-argument forms aren't really worth the catalog
space (just write 'empty' instead). The one-argument forms have some use,
but they also have a serious problem with looking too much like functional
cast notation; to the point where in many real use-cases, the parser would
misinterpret what was wanted.
Committing this as a separate patch, with the thought that we might want
to revert part or all of it if we can think of some way around the cast
ambiguity.
Implement these tests directly instead of constructing a singleton range
and then applying range-contains. This saves a range serialize/deserialize
cycle as well as a couple of redundant bound-comparison steps, and adds
very little code on net.
Remove elem_contained_by_range from the GiST opclass: it doesn't belong
there because there is no way to use it in an index clause (where the
indexed column would have to be on the left). Its commutator is in the
opclass, and that's what counts.
In the normal course of events, this matters only if ALTER DEFAULT
PRIVILEGES has been used to revoke default INSERT permission. Whether
or not the new behavior is more or less likely to be what the user wants
when dealing only with the built-in privilege facilities is arguable,
but it's clearly better when using a loadable module such as sepgsql
that may use the hook in ExecCheckRTPerms to enforce additional
permissions checks.
KaiGai Kohei, reviewed by Albe Laurenz
Per discussion, relax the range input/construction rules so that the
only hard error is lower bound > upper bound. Cases where the lower
bound is <= upper bound, but the range nonetheless normalizes to empty,
are now permitted.
Fix core dump in range_adjacent when bounds are infinite. Marginal
cleanup of regression test cases, some more code commenting.
Fix up some infelicitous coding in DefineRange, and add some missing error
checks. Rearrange operator strategy number assignments for GiST anyrange
opclass so that they don't make such a mess of opr_sanity's table of
operator names associated with different strategy numbers. Assign
hopefully-temporary selectivity estimators to range operators that didn't
have one --- poor as the estimates are, they're still a lot better than the
default 0.5 estimate, and they'll shut up the opr_sanity test that wants to
see selectivity estimators on all built-in operators.
This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
Use of anynonarray was a crude hack to get around ambiguity versus the
array inclusion operators of the same names. My previous patch to extend
the parser's type resolution heuristics makes that unnecessary, so use
the more general declaration instead. This eliminates a wart that these
operators couldn't be used with ranges over arrays, which are otherwise
supported just fine.
Also, mark range_before and range_after as commutator operators,
per discussion with Jeff Davis.
Fix assorted infelicities, such as dependency on OIDs that aren't
hardwired, as well as outright misdeclaration of daterange_canonical(),
which resulted in crashes if you invoked it directly. Add some more
regression tests to try to catch similar mistakes in future.
A range type whose element type has 'd' alignment must have 'd' alignment
itself, else there is no guarantee that the element value can be used
in-place. (Because range_deserialize uses att_align_pointer which forcibly
aligns the given pointer, violations of this rule did not lead to SIGBUS
but rather to garbage data being extracted, as in one of the added
regression test cases.)
Also, you can't put a toast pointer inside a range datum, since the
referenced value could disappear with the range datum still present.
For consistency with the handling of arrays and records, I also forced
decompression of in-line-compressed bound values. It would work to store
them as-is, but our policy is to avoid situations that might result in
double compression.
Add assorted regression tests for this, and bump catversion because of
fixes to built-in pg_type entries.
Also some marginal cleanup of inconsistent/unnecessary error checks.
Change range_before, range_after, range_adjacent to return false rather
than throwing an error when one or both input ranges are empty.
The original definition is unnecessarily difficult to use, and also can
result in undesirable planner failures since the planner could try to
compare an empty range to something else while deriving statistical
estimates. (This was, in fact, the cause of repeatable regression test
failures on buildfarm member jaguar, as well as intermittent failures
elsewhere.)
Also tweak rangetypes regression test to not drop all the objects it
creates, so that the final state of the regression database contains
some rangetype objects for pg_dump testing.
No functional changes in this commit (except I could not resist the
temptation to re-word a couple of error messages). This is just manual
cleanup after pgindent to make the code look reasonably like other PG
code, in preparation for more detailed code review to come.
In particular, my previous patch expected the create_index test to run
before the inherit test; but this was only true in the serial schedule.
Rearrange this portion of the schedules to be more consistent.
Per buildfarm results.
Add PlaceHolderVar wrappers as needed to make UNION ALL sub-select output
expressions appear non-constant and distinct from each other. This makes
the world safe for add_child_rel_equivalences to do what it does. Before,
it was possible for that function to add identical expressions to different
EquivalenceClasses, which logically should imply merging such ECs, which
would be wrong; or to improperly add a constant to an EquivalenceClass,
drastically changing its behavior. Per report from Teodor Sigaev.
The only currently known consequence of this bug is "MergeAppend child's
targetlist doesn't match MergeAppend" planner failures in 9.1 and later.
I am suspicious that there may be other failure modes that could affect
older release branches; but in the absence of any hard evidence, I'll
refrain from back-patching further than 9.1.
Further experimentation reveals that my previous change didn't fix the
issue entirely: these tests would still fail at the spring-forward DST
transition. There doesn't seem to be any great value in testing this
specific issue for both timestamp and timestamptz, so just lose the
latter tests.
I broke it in a previous commit because I neglected to install the
necessary incantations to have getopt() work on Windows.
Per red blots in buildfarm.
This mode prints out the permutations that would be run by the given
spec file, in the same format used by the permutation lines in spec
files. This helps in building new spec files.
Author: Alexander Shulgin, with some tweaks by me
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
As pointed out by Naoya Anzai, my previous try at this was a few bricks
shy of a load, because I had forgotten that the initial-positioning logic
might not try to skip over nulls at the end of the index the scan will
start from. We ought to fix that, because it represents an unnecessary
inefficiency, but first let's get the scan-stop logic back to a safe
state. With this patch, we preserve the performance benefit requested
in bug #6278 for the case of scanning forward into NULLs (in a NULLS
LAST index), but the reverse case of scanning backward across NULLs
when there's no suitable initial-positioning qual is still inefficient.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
Essentially, the "IF EXISTS" portion was being ignored, and an error
thrown anyway if the opfamily did not exist.
I broke this in commit fd1843ff8979c0461fb3f1a9eab61140c977e32d; so
backpatch to 9.1.X.
Report and diagnosis by KaiGai Kohei.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
When I consolidated two copies of the HOT-chain search logic in commit
4da99ea423, I introduced a behavior
change: the old code wouldn't necessarily traverse the entire chain,
if the most recently returned tuple were updated while the HOT chain
traversal is in progress. The new behavior seems more correct, but
unfortunately, the code here relies on a scan with SnapshotNow failing
to see its own updates. That seems pretty shaky even with the old HOT
chain traversal behavior, since there's no guarantee that these
updates will always be HOT, but it's trivial to broke a failure with
the new HOT search logic. Fix by updating just the first matching
pg_constraint tuple, rather than all of them, since there should be
only one anyway. But since nobody has reproduced this failure on older
versions, no back-patch for now.
Report and test case by Alex Hunsaker; tablecmds.c changes by me.
This bollixes the test because it's expecting to see the idx_tup_fetch
counter increase, which won't happen if heap fetches were avoided by use
of an index-only scan. Per buildfarm results.
While at it, let's just make sure that enable_seqscan and enable_indexscan
are ON for this test ...
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
We now report errors reported by the just-unblocked and unblocking
transactions identically; this should fix relatively common buildfarm
failures reported by animals that are failing the "wrong" session.
In commit c1d9579dd8, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
Per bug #6205, reported by Abel Abraham Camarillo Ojeda. This isn't a
particularly elegant fix, but I'm trying to minimize the chances of
causing yet another round of breakage.
Adjust regression tests to exercise this case.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
1. Use new dropdb --if-exists option, to avoid alarming the user if
the database being dropped doesn't already exist.
2. Bail out if createdb fails.
3. exit 1 if the checks fail.
4. Make it executable.
Josh Kupershmidt, with some kibitzing by me.
Previously, 'yesterday 04:00:00'::timestamp didn't do the same thing as
'04:00:00 yesterday'::timestamp, and the return value from the latter
was midnight rather than the specified time.
Dean Rasheed, with some stylistic changes
This was deemed unnecessary initially but in later discussion it was
agreed otherwise.
Original file from Kevin Grittner, allegedly from Dan Ports.
I had to clean up whitespace a bit per changes from Heikki.
Rather than dumping out the raw array as PostgreSQL represents it
internally, we now print it out in a format similar to the one in
which the user input it, which seems a lot more user friendly.
Shigeru Hanada
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
Now that we have a test that requires nondefault settings to pass, it seems
like we'd better mention that detail in the directions about how to run the
tests.
Also do some very minor copy-editing.
order of begin, prepare, and commit of three concurrent transactions that
have conflicts between them.
The test runs for a quite long time, and the expected output file is huge,
but this test caught some serious bugs during development, so seems
worthwhile to keep. The test uses prepared transactions, so it fails if the
server has max_prepared_transactions=0. Because of that, it's marked as
"ignore" in the schedule file.
Dan Ports
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
The relevant backslash commands already exist, so we're just adding an
additional column. With this commit, all objects that have psql backslash
commands and accept comments should now display those comments at least
in verbose mode.
Josh Kupershmidt, with doc additions by me.
I broke this in commit 5da79169d3, which
was obviously insufficiently well tested. Add some regression tests
in the hope of making future slip-ups more likely to be noticed.
Previously, xpath() simply returned an empty array if the expression did
not yield a node set. This is useless for expressions that return scalars,
such as one with name() at the top level. Arrange to return the scalar
value as a single-element xml array, instead. (String values will be
suitably escaped.)
This change will also cause xpath_exists() to return true, not false,
for such expressions.
Florian Pflug, reviewed by Radoslaw Smogura
Without this it's possible for the output to not be legal XML, as
illustrated by the added regression test cases.
NB: this change will need to be called out as an incompatibility in the
9.2 release notes, since it's possible somebody was relying on the old
behavior, even though it's clearly wrong.
Florian Pflug, reviewed by Radoslaw Smogura
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
Noah Misch diagnosed the buildfarm problems in the isolation tests
partly as failure to differentiate backends properly; the old code was
using backend IDs, which is not good enough because a new backend might
use an already used ID. Use PIDs instead.
Also, the code was purposely careless about other concurrent activity,
because it isn't expected; and in fact, it doesn't affect the vast
majority of the time. However, it can be observed that autovacuum can
block tables for long enough to cause sporadic failures. The new code
accounts for that by ignoring locks held by processes not explicitly
declared in our spec file.
Author: Noah Misch
The previous value of 20ms is dangerously close to the time actually
spent just waiting for the deadlock to happen, so on occasion it causes
the test to fail simply because the other session didn't get to run
early enough, not managing to cause the deadlock that needs to be
detected. With this new value, it's expected that most machines on
normal load will be able to pass the test.
Author: Noah Misch
These new files allow the new FK tests on isolationtester to pass on the
serializable and repeatable read isolation levels (which are untested
by the buildfarm).
Author: Kevin Grittner
Reviewed by Noah Misch
This is more SQL-spec-compliant, more easily extensible, and better
performing than the old method of inventing special variables.
Pavel Stehule, reviewed by Shigeru Hanada and David Wheeler
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
This enables us to test that blocking commands (such as foreign keys
checks that conflict with some other lock) act as intended. The set of
tests that this adds is pretty minimal, but can easily be extended by
adding new specs.
The intention is that this will serve as a basis for ensuring that
further tweaks of locking implementation preserve (or improve) existing
behavior.
Author: Noah Misch
If there's a dangerous structure T0 ---> T1 ---> T2, and T2 commits first,
we need to abort something. If T2 commits before both conflicts appear,
then it should be caught by OnConflict_CheckForSerializationFailure. If
both conflicts appear before T2 commits, it should be caught by
PreCommit_CheckForSerializationFailure. But that is actually run when
T2 *prepares*. Fix that in OnConflict_CheckForSerializationFailure, by
treating a prepared T2 as if it committed already.
This is mostly a problem for prepared transactions, which are in prepared
state for some time, but also for regular transactions because they also go
through the prepared state in the SSI code for a short moment when they're
committed.
Kevin Grittner and Dan Ports
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Such a condition is unsatisfiable in combination with any other type of
btree-indexable condition (since we assume btree operators are always
strict). 8.3 and 8.4 had an explicit test for this, which I removed in
commit 29c4ad9829, mistakenly thinking that
the case would be subsumed by the more general handling of IS (NOT) NULL
added in that patch. Put it back, and improve the comments about it, and
add a regression test case.
Per bug #6079 from Renat Nasyrov, and analysis by Dean Rasheed.
already been marked as PREPARED cannot be killed. Kill the current
transaction instead.
One of the prepared_xacts regression tests actually hits this bug. I
removed the anomaly from the duplicate-gids test so that it fails in the
intended way, and added a new test to check serialization failures with
a prepared transaction.
Dan Ports
When recursing after an optimization in pull_up_sublinks_qual_recurse, the
available_rels value passed down must include only the relations that are
in the righthand side of the new SEMI or ANTI join; it's incorrect to pull
up a sub-select that refers to other relations, as seen in the added test
case. Per report from BangarRaju Vadapalli.
While at it, rethink the idea of recursing below a NOT EXISTS. That is
essentially the same situation as pulling up ANY/EXISTS sub-selects that
are in the ON clause of an outer join, and it has the same disadvantage:
we'd force the two joins to be evaluated according to the syntactic nesting
order, because the lower join will most likely not be able to commute with
the ANTI join. That could result in having to form a rather large join
product, whereas the handling of a correlated subselect is not quite that
dumb. So until we can handle those cases better, #ifdef NOT_USED that
case. (I think it's okay to pull up in the EXISTS/ANY cases, because SEMI
joins aren't so inflexible about ordering.)
Back-patch to 8.4, same as for previous patch in this area. Fortunately
that patch hadn't made it into any shipped releases yet.
Per recommendation from Peter. Neither choice is bulletproof, but this
is the existing style and it does help prevent unexpected environment
variable substitution.
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
This use-case was broken in commit 529cb267a6
of 2010-10-21, in which I commented "For the moment, we just forbid such
matching. We might later wish to insert an automatic downcast to the
underlying array type, but such a change should also change matching of
domains to ANYELEMENT for consistency". We still lack consensus about what
to do with ANYELEMENT; but not matching ANYARRAY is a clear loss of
functionality compared to prior releases, so let's go ahead and make that
happen. Per complaint from Regina Obe and extensive subsequent discussion.
Since the original implementation of CTEs only allowed them in SELECT
queries, the rule rewriter did not expect to find any CTEs in statements
being rewritten by ON INSERT/UPDATE/DELETE rules. We had dealt with this
to some extent but the code was still several bricks shy of a load, as
illustrated in bug #6051 from Jehan-Guillaume de Rorthais.
In particular, we have to be able to copy CTEs from the original query's
cteList into that of a rule action, in case the rule action references the
CTE (which it pretty much always will). This also implies we were doing
things in the wrong order in RewriteQuery: we have to recursively rewrite
the CTE queries before expanding the main query, so that we have the
rewritten queries available to copy.
There are unpleasant limitations yet to resolve here, but at least we now
throw understandable FEATURE_NOT_SUPPORTED errors for them instead of just
failing with bizarre implementation-dependent errors. In particular, we
can't handle propagating the same CTE into multiple post-rewrite queries
(because then the CTE would be evaluated multiple times), and we can't cope
with conflicts between CTE names in the original query and in the rule
actions.
This avoids an Assert failure when we try to use ordinary index fetches
while checking for exclusion conflicts. Per report from Noah Misch.
No need for back-patch because the Assert wasn't there before 9.1.
The existence of a btree opclass accepting composite types caused us to
assume that every composite type is sortable. This isn't true of course;
we need to check if the column types are all sortable. There was logic
for this for the case of array comparison (ie, check that the element
type is sortable), but we missed the point for rowtypes. Per Teodor's
report of an ANALYZE failure for an unsortable composite type.
Rather than just add some more ad-hoc logic for this, I moved knowledge of
the issue into typcache.c. The typcache will now only report out array_eq,
record_cmp, and friends as usable operators if the array or composite type
will work with those functions.
Unfortunately we don't have enough info to do this for anonymous RECORD
types; in that case, just assume it will work, and take the runtime failure
as before if it doesn't.
This patch might be a candidate for back-patching at some point, but
given the lack of complaints from the field, I'd rather just test it in
HEAD for now.
Note: most of the places touched in this patch will need further work
when we get around to supporting hashing of record types.
We need this now because we allow domains over arrays, and we'll probably
allow domains over composites pretty soon, which makes the problem even
more obvious.
Although domains over arrays also exist in previous versions, this does not
need to be back-patched, because the coding used in older versions
successfully "looked through" domains over arrays. The problem is exposed
by not treating a domain as having a typelem.
Problem identified by Noah Misch, though I did not use his patch, since
it would require additional work to handle domains over composites that
way. This approach is more future-proof.
On further analysis, it turns out that it is not needed to duplicate predicate
locks to the new row version at update, the lock on the version that the
transaction saw as visible is enough. However, there was a different bug in
the code that checks for dangerous structures when a new rw-conflict happens.
Fix that bug, and remove all the row-version chaining related code.
Kevin Grittner & Dan Ports, with some comment editorialization by me.
loop if it fails, which is what what happened on my HP-UX box. (I think
the reason it failed on that box is a misconfiguration on my behalf, but
that's no reason to hang.)
This doesn't work as expected because the isolationtester program requires
libpq to already be installed. While it works when you've already installed
libpq, having to already have done "make install" defeats most of the point
of a check with a temp installation. And there are weird corner cases if
the dynamic linker picks up an old libpq.so from system library directories.
Remove the target (or more precisely, make it print a helpful message) so
people don't expect the case to work.
Remove random system #includes in favor of using postgres_fe.h. (The
alternative to that is letting this module grow its own configuration
testing ability...)
Also fix the "make clean" target to actually clean things up.
Per local testing.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
Added a new option --extra-install to pg_regress to arrange installing
the respective contrib directory into the temporary installation.
This is currently not yet supported for Windows MSVC builds.
Updated the .gitignore files for contrib modules to ignore the
leftovers of a temp-install check run.
Changed the exit status of "make check" in a pgxs build (which still
does nothing) to 0 from 1.
Added "make check" in contrib to top-level "make check-world".
Teach the program and script to deal with OID-array referencing columns,
which we now have several of. Also, modify the recommended usage process
to specify that the program should be run against the regression database
rather than template1. This lets it find numerous joins that cannot be
found in template1 because the relevant catalogs are entirely empty.
Together these changes add seventeen formerly-missed cases to the oidjoins
regression test.
This test should now work in any database with UTF8 encoding, regardless
of the database's default locale. The former restriction was really
"doesn't work if default locale is C", and that was because of not handling
mbstowcs/wcstombs correctly.
This syntax allows a standalone table to be made into a typed table,
or a typed table to be made standalone. This is possibly a mildly
useful feature in its own right, but the real motivation for this
change is that we need it to make pg_upgrade work with typed tables.
This doesn't actually fix that problem, but it's necessary
infrastructure.
Noah Misch
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
This also ensures that we take a relation lock on the composite type when
creating a typed table, which is necessary to prevent the composite type
and the typed table from getting out of step in the face of concurrent
DDL.
Noah Misch, with some changes.
In \d, be more careful to print collation only if it's not the default for
the column's data type. Avoid assuming that the name "default" is magic.
Fix \d on a composite type so that it will print per-column collations.
It's no longer the case that a composite type cannot have modifiers.
(In consequence, the expected outputs for composite-type regression tests
change.)
Fix \dD so that it will print collation for a domain, again only if it's
not the same as the base type's collation.
This allows the usual rules for assigning a collation to a local variable
to be overridden. Per discussion, it seems appropriate to support this
rather than forcing all local variables to have the argument-derived
collation.
Instead of using slightly-too-clever heuristics to decide when we must
create a TOAST table, just check whether one is needed every time the
table is altered. Checking whether a toast table is needed is cheap
enough that we needn't worry about doing it on every ALTER TABLE command,
and the previous coding is apparently prone to accidental breakage:
commit 04e17bae50 broken ALTER TABLE ..
SET STORAGE, which moved some actions from AT_PASS_COL_ATTRS to
AT_PASS_MISC, and commit 6c57239985 broke
ALTER TABLE .. ADD COLUMN by changing the way that adding columns
recurses into child tables.
Noah Misch, with one comment change by me
If the referencing and referenced columns have different collations,
the parser will be unable to resolve which collation to use unless it's
helped out in this way. The effects are sometimes masked, if we end up
using a non-collation-sensitive plan; but if we do use a mergejoin
we'll see a failure, as recently noted by Robert Haas.
The SQL spec states that the referenced column's collation should be used
to resolve RI checks, so that's what we do. Note however that we currently
don't append a COLLATE clause when writing a query that examines only the
referencing column. If we ever support collations that have varying
notions of equality, that will have to be changed. For the moment, though,
it's preferable to leave it off so that we can use a normal index on the
referencing column.
This involves getting the character classification and case-folding
functions in the regex library to use the collations infrastructure.
Most of this work had been done already in connection with the upper/lower
and LIKE logic, so it was a simple matter of transposition.
While at it, split out these functions into a separate source file
regc_pg_locale.c, so that they can be correctly labeled with the Postgres
project's license rather than the Scriptics license. These functions are
100% Postgres-written code whereas what remains in regc_locale.c is still
mostly not ours, so lumping them both under the same copyright notice was
getting more and more misleading.
Tweak the test so that it does not depend on the platform using ".utf8" as
the extension signifying that a locale uses UTF8 encoding. For the most
part this just requires using the abbreviated collation names "en_US" etc,
though I had to work a bit harder on the collation creation tests.
This opens the door to using the test on platforms that spell locales
differently, for example ".utf-8" or ".UTF-8". Also, the test is now
somewhat useful with server encodings other than UTF8; though depending on
which encoding is selected, different subsets of it will fail for lack of
character set support.
Remove crude hack that tried to propagate collation through a
function-returning-record, ie, from the function's arguments to individual
fields selected from its result record. That is just plain inconsistent,
because the function result is composite and cannot have a collation;
and there's no hope of making this kind of action-at-a-distance work
consistently. Adjust regression test cases that expected this to happen.
Meanwhile, the behavior of casting to a domain with a declared collation
stays the same as it was, since that seemed to be the consensus.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
The previous coding set attinhcount too high in some cases, resulting in
an undumpable, undroppable column. Per bug #5856, reported by Naoya
Anzai. See also commit 31b6fc06d8, which
fixes a similar bug in ALTER TABLE .. ADD CONSTRAINT.
Patch by Noah Misch.
This mostly involves making it work with the objectaddress.c framework,
which does most of the heavy lifting. In that vein, change
GetForeignDataWrapperOidByName to get_foreign_data_wrapper_oid and
GetForeignServerOidByName to get_foreign_server_oid, to match the
pattern we use for other object types.
Robert Haas and Shigeru Hanada
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
Tom Lane
Robert Haas
Alvaro Herrera
Peter Eisentraut
Simon Riggs
Andrew Dunstan
Heikki Linnakangas
Magnus Hagander
Bruce Momjian