RelationCopyStorageUsingBuffer() did not free the strategies used to access
the source / target relation. They memory was released at the end of the
transaction, but when using a template database with a lot of relations, the
temporary leak can become big prohibitively big.
RelationCopyStorageUsingBuffer() acquired the buffer for the target relation
with RBM_NORMAL, therefore requiring a read of a block guaranteed to be
zero. Use RBM_ZERO_AND_LOCK instead.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20230321070113.o2vqqxogjykwgfrr@awork3.anarazel.de
Backpatch: 15-, where STRATEGY WAL_LOG was introduced
If an error occurs before we close the fake relcache entry, the the
fake relcache entry will be destroyed by the SmgrRelation will
survive until end of transaction. Its smgr_owner pointer ends up
pointing to already-freed memory.
The original reason for using a fake relcache entry here was to try
to avoid reusing an SMgrRelation across a relevant invalidation. To
avoid that problem, just call smgropen() again each time we need a
reference to it. Hopefully someday we will come up with a more
elegant approach, but accessing uninitialized memory is bad so let's
do this for now.
Dilip Kumar, reviewed by Andres Freund and Tom Lane. Report by
Justin Pryzby.
Discussion: http://postgr.es/m/20220802175043.GA13682@telsasoft.com
Discussion: http://postgr.es/m/CAFiTN-vSFeE6_W9z698XNtFROOA_nSqUXWqLcG0emob_kJ+dEQ@mail.gmail.com
RelationCopyStorageUsingBuffer thought it could skip copying
empty pages, but of course that does not work at all, because
subsequent blocks will be out of place.
Also fix it to acquire share lock on the source buffer. It *might*
be safe to not do that, but it's not very certain, and I don't think
this code deserves any benefit of the doubt.
Dilip Kumar, per complaint from me
Discussion: https://postgr.es/m/3679800.1659654066@sss.pgh.pa.us
It incorrectly used GetBufferDescriptor instead of
GetLocalBufferDescriptor, causing it to not find the correct buffer in
most cases, and performing an out-of-bounds memory read in the corner
case that temp_buffers > shared_buffers.
It also bumped the usage-count on the buffer, even if it was
previously pinned. That won't lead to crashes or incorrect results,
but it's different from what the shared-buffer case does, and
different from the usual code in LocalBufferAlloc. Fix that too, and
make the code ordering match LocalBufferAlloc() more closely, so that
it's easier to verify that it's doing the same thing.
Currently, ReadRecentBuffer() is only used with non-temp relations, in
WAL redo, so the broken code is currently dead code. However, it could
be used by extensions.
Backpatch-through: 14
Discussion: https://www.postgresql.org/message-id/2d74b46f-27c9-fb31-7f99-327a87184cc0%40iki.fi
Reviewed-by: Thomas Munro, Zhang Mingli, Richard Guo
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
xlog.h is directly and indirectly #included in a lot of places. With
this change, xloginsert.h is no longer unnecessarily included in the
large number of them that don't need it.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVe-W+WM5P44N7eG9C2_FmaeM8Dq5aCnD3fHt0Ba=WR6w@mail.gmail.com
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Since a partitioned index doesn't have storage, getting the number of
blocks from it will not give sensible results. Existing callers
already check that they don't call it that way, so there doesn't
appear to be a live problem. But for correctness, handle
RELKIND_PARTITIONED_INDEX together with the other non-storage
relkinds.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/1d3a5fbe-f48b-8bea-80da-9a5c4244aef9@enterprisedb.com
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
These have been unrelated since bgwriter and checkpointer were split into two
processes in 806a2aee37. As there several pending patches (shared memory
stats, extending the set of tracked IO / buffer statistics) that are made a
bit more awkward by the grouping, split them. Done separately to make
reviewing easier.
This does *not* change the contents of pg_stat_bgwriter or move fields out of
bgwriter/checkpointer stats that arguably do not belong in either. However
pgstat_fetch_global() was renamed and split into
pgstat_fetch_stat_checkpointer() and pgstat_fetch_stat_bgwriter().
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210405092914.mmxqe7j56lsjfsej@alap3.anarazel.de
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
CheckBuffer() is designed to be a concurrent-safe function able to run
sanity checks on a relation page without loading it into the shared
buffers. The operation is done using a lock on the partition involved
in the shared buffer mapping hashtable and an I/O lock for the buffer
itself, preventing the risk of false positives due to any concurrent
activity.
The primary use of this function is the detection of on-disk corruptions
for relation pages. If a page is found in shared buffers, the on-disk
page is checked if not dirty (a follow-up checkpoint would flush a valid
version of the page if dirty anyway), as it could be possible that a
page was present for a long time in shared buffers with its on-disk
version corrupted. Such a scenario could lead to a corrupted cluster if
a host is plugged off for example. If the page is not found in shared
buffers, its on-disk state is checked. PageIsVerifiedExtended() is used
to apply the same sanity checks as when a page gets loaded into shared
buffers.
This function will be used by an upcoming patch able to check the state
of on-disk relation pages using a SQL function.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
This is useful for checks of relation pages without having to load the
pages into the shared buffers, and two cases can make use of that: page
verification in base backups and the online, lock-safe, flavor.
Compatibility is kept with past versions using a macro that calls the
new extended routine with the set of options compatible with the
original version.
Extracted from a larger patch by the same author.
Author: Anastasia Lubennikova
Reviewed-by: Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/608f3476-0598-2514-2c03-e05c7d2b0cbd@postgrespro.ru
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
Holding just a buffer pin (with no buffer lock) on an nbtree buffer/page
provides very weak guarantees, especially compared to heapam, where it's
often safe to read a page while only holding a buffer pin. This commit
has Valgrind enforce the following rule: it is never okay to access an
nbtree buffer without holding both a pin and a lock on the buffer.
A draft version of this patch detected questionable code that was
cleaned up by commits fa7ff642 and 7154aa16. The code in question used
to access an nbtree buffer page's special/opaque area with no buffer
lock (only a buffer pin). This practice (which isn't obviously unsafe)
is hereby formally disallowed in nbtree. There doesn't seem to be any
reason to allow it, and banning it keeps things simple for Valgrind.
The new checks are implemented by adding custom nbtree client requests
(located in LockBuffer() wrapper functions); these requests are
"superimposed" on top of the generic bufmgr.c Valgrind client requests
added by commit 1e0dfd16. No custom resource management cleanup code is
needed to undo the effects of marking buffers as non-accessible under
this scheme.
Author: Peter Geoghegan
Reviewed-By: Anastasia Lubennikova, Georgios Kokolatos
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
Strengthen the LockBuffer() assertion that verifies BufferIsValid() by
making it verify BufferIsPinned() instead. Do the same in nearby
related functions.
There is probably not much chance that anybody will try to lock a buffer
that is not already pinned, but we might as well make sure of that.
Make PinBuffer() mark buffers as defined to Valgrind unconditionally,
including when the buffer header spinlock must be acquired. Failure to
handle that case could lead to false positive reports from Valgrind.
This theoretically creates a risk that we'll mark buffers defined even
when external callers don't end up with a buffer pin. That seems
perfectly acceptable, though, since in general we make no guarantees
about buffers that are unsafe to access being reliably marked as unsafe.
Oversight in commit 1e0dfd16, which added valgrind buffer access
instrumentation.
Teach Valgrind memcheck to maintain the "defined-ness" of each shared
buffer based on whether the backend holds at least one pin at the point
it is accessed by access method code. Bugs like the one fixed by commit
b0229f26 can be detected using this new instrumentation.
Note that backends running with Valgrind naturally have their own
independent ideas about whether any given byte in shared memory is safe
or unsafe to access. There is no risk that concurrent access by
multiple backends to the same shared memory will confuse Valgrind's
instrumentation, because everything already works at the process level
(or at the memory mapping level, if you prefer).
Author: Álvaro Herrera, Peter Geoghegan
Reviewed-By: Anastasia Lubennikova
Discussion: https://postgr.es/m/20150723195349.GW5596@postgresql.org
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Provide PrefetchSharedBuffer(), a variant that takes SMgrRelation, for
use in recovery. Rename LocalPrefetchBuffer() to PrefetchLocalBuffer()
for consistency.
Add a return value to all of these. In recovery, tolerate and report
missing files, so we can handle relations unlinked before crash recovery
began. Also report cache hits and misses, so that callers can do faster
buffer lookups and better I/O accounting.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
The goal of separating hotly accessed per-backend data from PGPROC
into PGXACT is to make accesses fast (GetSnapshotData() in
particular). But delayChkpt is not actually accessed frequently; only
when starting a checkpoint. As it is frequently modified (multiple
times in the course of a single transaction), storing it in the same
cacheline as hotly accessed data unnecessarily dirties a contended
cacheline.
Therefore move delayChkpt to PGPROC.
This is part of a larger series of patches intending to improve
GetSnapshotData() scalability. It is committed and pushed separately,
as it is independently beneficial (small but measurable win, limited
by the other frequent modifications of PGXACT).
Author: Andres Freund
Reviewed-By: Robert Haas, Thomas Munro, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Previously while the startup process was waiting for the recovery conflict
with snapshot, tablespace or lock to be resolved, waiting was reported in
PS display, but not in the case of recovery conflict with buffer pin.
This commit makes the startup process in hot standby report waiting via PS
while waiting for the conflicts with other backends holding buffer pins to
be resolved.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
Andres Freund
Robert Haas
Tom Lane
Heikki Linnakangas
Alvaro Herrera
Thomas Munro
Amit Kapila
Bruce Momjian
Peter Eisentraut
Daniel Gustafsson
Fujii Masao
Michael Paquier
Noah Misch
Peter Geoghegan