There's really no situation where we don't want these unknown-to-text
conversions to happen. The alternative is failure anyway, and the one
caller that was passing "false" did so only because it expected the
case could not arise. Might as well simplify the code.
Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com
Previously, type "unknown" was labeled as a base type in pg_type, which
perhaps had some sense to it because you were allowed to create tables with
unknown-type columns. But now that we don't allow that, it makes more
sense to label it a pseudo-type. This has the additional effects of
forbidding use of "unknown" as a domain base type, cast source or target
type, PL function argument or result type, or plpgsql local variable type;
all of which seem like good holes to plug.
Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com
Previously, we left such literals alone if the query or subquery had
no properties forcing a type decision to be made (such as an ORDER BY or
DISTINCT clause using that output column). This meant that "unknown" could
be an exposed output column type, which has never been a great idea because
it could result in strange failures later on. For example, an outer query
that tried to do any operations on an unknown-type subquery output would
generally fail with some weird error like "failed to find conversion
function from unknown to text" or "could not determine which collation to
use for string comparison". Also, if the case occurred in a CREATE VIEW's
query then the view would have an unknown-type column, causing similar
failures in queries trying to use the view.
To fix, at the tail end of parse analysis of a query, forcibly convert any
remaining "unknown" literals in its SELECT or RETURNING list to type text.
However, provide a switch to suppress that, and use it in the cases of
SELECT inside a set operation or INSERT command. In those cases we already
had type resolution rules that make use of context information from outside
the subquery proper, and we don't want to change that behavior.
Also, change creation of an unknown-type column in a relation from a
warning to a hard error. The error should be unreachable now in CREATE
VIEW or CREATE MATVIEW, but it's still possible to explicitly say "unknown"
in CREATE TABLE or CREATE (composite) TYPE. We want to forbid that because
it's nothing but a foot-gun.
This change creates a pg_upgrade failure case: a matview that contains an
unknown-type column can't be pg_upgraded, because reparsing the matview's
defining query will now decide that the column is of type text, which
doesn't match the cstring-like storage that the old materialized column
would actually have. Add a checking pass to detect that. While at it,
we can detect tables or composite types that would fail, essentially
for free. Those would fail safely anyway later on, but we might as
well fail earlier.
This patch is by me, but it owes something to previous investigations
by Rahila Syed. Also thanks to Ashutosh Bapat and Michael Paquier for
review.
Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
If you create a DestReciver of type DestRemote and try to use it from
a replication connection that is not bound to a specific daabase, or
any other hypothetical type of backend that is not bound to a specific
database, it will fail because it doesn't have a pg_proc catalog to
look up properties of the types being printed. In general, that's
an unavoidable problem, but we can hardwire the properties of a few
builtin types in order to support utility commands. This new
DestReceiver of type DestRemoteSimple does just that.
Patch by me, reviewed by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
For some reason that is lost in history, a descending sequence would
default its minimum value to -2^63+1 (-PG_INT64_MAX) instead of
-2^63 (PG_INT64_MIN), even though explicitly specifying a minimum value
of -2^63 would work. Fix this inconsistency by using the full range by
default.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Since 69f4b9c plain expression evaluation (and thus normal projection)
can't return sets of tuples anymore. Thus remove code dealing with
that possibility.
This will require adjustments in external code using
ExecEvalExpr()/ExecProject() - that should neither be hard nor very
common.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
If a user requests the commit timestamp for a transaction old enough
that its data is concurrently being truncated away by vacuum at just the
right time, they would receive an ugly internal file-not-found error
message from slru.c rather than the expected NULL return value.
In a primary server, the window for the race is very small: the lookup
has to occur exactly between the two calls by vacuum, and there's not a
lot that happens between them (mostly just a multixact truncate). In a
standby server, however, the window is larger because the truncation is
executed as soon as the WAL record for it is replayed, but the advance
of the oldest-Xid is not executed until the next checkpoint record.
To fix in the primary, simply reverse the order of operations in
vac_truncate_clog. To fix in the standby, augment the WAL truncation
record so that the standby is aware of the new oldest-XID value and can
apply the update immediately. WAL version bumped because of this.
No backpatch, because of the low importance of the bug and its rarity.
Author: Craig Ringer
Reviewed-By: Petr Jelínek, Peter Eisentraut
Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com
In ExecInsert(), do not switch back to the root partitioned table
ResultRelInfo until after we finish ExecProcessReturning(), so that
RETURNING projection is done using the partition's descriptor. For
the projection to work correctly, we must initialize the same for each
leaf partition during ModifyTableState initialization.
Amit Langote
When a tuple is inherited into a partitioning root, no partition
constraints need to be enforced; when it is inserted into a leaf, the
parent's partitioning quals needed to be enforced. The previous
coding got both of those cases right. When a tuple is inserted into
an intermediate level of the partitioning hierarchy (i.e. a table
which is both a partition itself and in turn partitioned), it must
enforce the partitioning qual inherited from its parent. That case
got overlooked; repair.
Amit Langote
Evaluation of set returning functions (SRFs_ in the targetlist (like SELECT
generate_series(1,5)) so far was done in the expression evaluation (i.e.
ExecEvalExpr()) and projection (i.e. ExecProject/ExecTargetList) code.
This meant that most executor nodes performing projection, and most
expression evaluation functions, had to deal with the possibility that an
evaluated expression could return a set of return values.
That's bad because it leads to repeated code in a lot of places. It also,
and that's my (Andres's) motivation, made it a lot harder to implement a
more efficient way of doing expression evaluation.
To fix this, introduce a new executor node (ProjectSet) that can evaluate
targetlists containing one or more SRFs. To avoid the complexity of the old
way of handling nested expressions returning sets (e.g. having to pass up
ExprDoneCond, and dealing with arguments to functions returning sets etc.),
those SRFs can only be at the top level of the node's targetlist. The
planner makes sure (via split_pathtarget_at_srfs()) that SRF evaluation is
only necessary in ProjectSet nodes and that SRFs are only present at the
top level of the node's targetlist. If there are nested SRFs the planner
creates multiple stacked ProjectSet nodes. The ProjectSet nodes always get
input from an underlying node.
We also discussed and prototyped evaluating targetlist SRFs using ROWS
FROM(), but that turned out to be more complicated than we'd hoped.
While moving SRF evaluation to ProjectSet would allow to retain the old
"least common multiple" behavior when multiple SRFs are present in one
targetlist (i.e. continue returning rows until all SRFs are at the end of
their input at the same time), we decided to instead only return rows till
all SRFs are exhausted, returning NULL for already exhausted ones. We
deemed the previous behavior to be too confusing, unexpected and actually
not particularly useful.
As a side effect, the previously prohibited case of multiple set returning
arguments to a function, is now allowed. Not because it's particularly
desirable, but because it ends up working and there seems to be no argument
for adding code to prohibit it.
Currently the behavior for COALESCE and CASE containing SRFs has changed,
returning multiple rows from the expression, even when the SRF containing
"arm" of the expression is not evaluated. That's because the SRFs are
evaluated in a separate ProjectSet node. As that's quite confusing, we're
likely to instead prohibit SRFs in those places. But that's still being
discussed, and the code would reside in places not touched here, so that's
a task for later.
There's a lot of, now superfluous, code dealing with set return expressions
around. But as the changes to get rid of those are verbose largely boring,
it seems better for readability to keep the cleanup as a separate commit.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
These macros work fine when they are used directly in an "if" test or
similar, but as soon as the return values are assigned to boolean
variables (or passed as boolean arguments to some function), they become
bugs, hopefully caught by compiler warnings. To avoid future problems,
fix the definitions so that they return actual booleans.
To further minimize the risk that somebody uses them in back-patched
fixes that only work correctly in branches starting from the current
master and not in old ones, back-patch the change to supported branches
as appropriate.
See also commit af4472bcb8, and the long
discussion (and larger patch) in the thread mentioned in its commit
message.
Discussion: https://postgr.es/m/18672.1483022414@sss.pgh.pa.us
This makes it possible to delete multiple keys from a jsonb value by
passing in an array of text values, which makes the operaiton much
faster than individually deleting the keys (which would require copying
the jsonb structure over and over again.
Reviewed by Dmitry Dolgov and Michael Paquier
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
Move this logic out of initdb into a user-callable function. This
simplifies the code and makes it possible to update the standard
collations later on if additional operating system collations appear.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Euler Taveira <euler@timbira.com.br>
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
The operators money*int8, int8*money, and money/int8 were implemented in
code but not registered in pg_operator or pg_proc.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Between 6eeb95f0f5 and
7b1c2a0f20, builtins.h contained
additional prototypes that have now been moved elsewhere, so we don't
need to include nodes/parsenodes.h anymore.
Fix some files that were relying on builtins.h implicitly pulling in
some unrelated stuff they needed.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
INSERT ... VALUES with a single VALUES row is implemented quite differently
from the general VALUES case. A user-visible implication of that is that
we accept SRFs in the single-row case, but not in the multi-row case.
That's a historical artifact no doubt, but in view of the lack of field
complaints, I'm not excited about fixing it right now.
However, check_srf_call_placement() needs to know about this, first because
it should throw an error in the unsupported case, and second because it
should set p_hasTargetSRFs in the single-row case (because we treat that
like a SELECT tlist). That's an oversight in commit a4c35ea1c.
To fix, split EXPR_KIND_VALUES into two values. So far as I can see,
this is the only place where we need to distinguish the two cases at
present; but there might be more later.
Patch by me, per report from Andres Freund.
Discussion: https://postgr.es/m/20170116081548.zg63zltblwimpfgp@alap3.anarazel.de
Normally, if we have a WHERE clause like "indexcol = constant",
the planner will figure out that that index column can be ignored
when determining whether the index has a desired sort ordering.
But this failed to work for boolean index columns, because a
condition like "boolcol = true" is canonicalized to just "boolcol"
which does not give rise to an EquivalenceClass. Add a check to
allow the same type of deduction to be made in this case too.
Per a complaint from Dima Pavlov. Arguably this is a bug, but given the
limited impact and the small number of complaints so far, I won't risk
destabilizing plans in stable branches by back-patching.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/1788.1481605684@sss.pgh.pa.us
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
Move the code for doing parent attnos to child attnos mapping for Vars
in partition constraint expressions to a separate function
map_partition_varattnos() and call it from the appropriate places.
Doing it in get_qual_from_partbound(), as is now, would produce wrong
result in certain multi-level partitioning cases, because it only
considers the current pair of parent-child relations. In certain
multi-level partitioning cases, attnums for the same key attribute(s)
might differ between various levels causing the same attribute to be
numbered differently in different instances of the Var corresponding
to a given attribute.
With this commit, in generate_partition_qual(), we first generate the
the whole partition constraint (considering all levels of partitioning)
and then do the mapping, so that Vars in the final expression are
numbered according the leaf relation (to which it is supposed to apply).
Amit Langote, reviewed by me.
Somebody failed to grasp the point of having the #ifdef CATCACHE_STATS
fields at the end of the struct. Put that back the way it should be,
and add a comment making it more explicit why it should be that way.
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
I noticed that p_value_substitute, which is a single-purpose kluge I added
in 2002 (commit b0422b215), could be replaced by having domainAddConstraint
install a parser hook that looks for the name "value". The parser hook
code only dates back to 2009, so it's not surprising that we had to kluge
this in 2002, but we can do it more cleanly now.
I got annoyed about how some fields of ParseState were documented in the
struct's block comment and some weren't; not all of the latter are trivial.
Fix that. Also reorder a couple of fields that seem to have been placed
rather randomly, or maybe with an idea of avoiding padding space; but there
are never so many ParseStates in existence at one time that we ought to
value pad space over readability.
With the old code, a backend that read pg_stat_activity without ever
having executed a parallel query might see a backend in the midst of
executing one waiting on a DSA LWLock, resulting in a crash. The
solution is for backends to register the tranche at startup time, not
the first time a parallel query is executed.
Report by Andreas Seltenreich. Patch by me, reviewed by Thomas Munro.
RelationGetPartitionQual() and generate_partition_qual() are always
called with recurse = true, so we don't need an argument for that.
Extracted by me from a larger patch by Amit Langote.
After a tuple is routed to a partition, it has been converted from the
root table's row type to the partition's row type. ExecConstraints
needs to report the failure using the original tuple and the parent's
tuple descriptor rather than the ones for the selected partition.
Amit Langote
configure can only probe the existence of gcc intrinsics, not how well
they're implemented, and unfortunately the answer is sometimes "badly".
In particular we've found that multiple compilers fail to implement
char-width __sync_lock_test_and_set() correctly on PPC; and even a correct
implementation would necessarily be pretty inefficient, since that hardware
has only a word-wide primitive to work with.
Given the knowledge we've accumulated in s_lock.h, it appears that it's
best to rely on int-width TAS operations on most non-Intel architectures.
Hence, pick int not char when both are nominally available to us in
generic-gcc.h (note that that code is not used for x86[_64]).
Back-patch to fix regression test failures on FreeBSD/PPC. Ordinarily
back-patching a change like this would be verboten because of ABI breakage.
But since pg_atomic_flag is not yet used in any Postgres data structure,
there's no ABI to break. It seems safer to back-patch to avoid possible
gotchas, if someday we do back-patch something that uses pg_atomic_flag.
Discussion: https://postgr.es/m/25414.1483076673@sss.pgh.pa.us
Commit 2ac3ef7a01 added a TupleTapleSlot
for partition tuple slot to EState (es_partition_tuple_slot) but it's
more logical to have it as part of ModifyTableState
(mt_partition_tuple_slot) and CopyState (partition_tuple_slot).
Discussion: http://postgr.es/m/1bd459d9-4c0c-197a-346e-e5e59e217d97@lab.ntt.co.jp
Amit Langote, per a gripe from me
Leave OpenSSL's default passphrase collection callback in place during
the first call of secure_initialize() in server startup. Although that
doesn't work terribly well in daemon contexts, some people feel we should
not break it for anyone who was successfully using it before. We still
block passphrase demands during SIGHUP, meaning that you can't adjust SSL
configuration on-the-fly if you used a passphrase, but this is no worse
than what it was before commit de41869b6. And we block passphrase demands
during EXEC_BACKEND reloads; that behavior wasn't useful either, but at
least now it's documented.
Tweak some related log messages for more readability, and avoid issuing
essentially duplicate messages about reload failure caused by a passphrase.
Discussion: https://postgr.es/m/29982.1483412575@sss.pgh.pa.us
The typical size of an LWLock is now 16 bytes even on 64-bit platforms,
and the size of slock_t is now irrelevant. But pg_atomic_uint32 can
(perhaps surprisingly) still be larger than 4 bytes, so there's still
some marginal point to allowing LWLOCK_MINIMAL_SIZE == 64.
Commit 008608b9d5 made the changes
that led to the need for these updates.
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
The advantage of clock_gettime() is that the API allows the result to
be precise to nanoseconds, not just microseconds as in gettimeofday().
Now that it's routinely possible to do tens of plan node executions
in 1us, we really need more precision than gettimeofday() can offer
for EXPLAIN ANALYZE to accumulate statistics with.
Some research shows that clock_gettime() is available on pretty nearly
every modern Unix-ish platform, and as far as I have been able to test,
it has about the same execution time as gettimeofday(), so there's no
loss in switching over. (By the same token, this doesn't do anything
to fix the fact that we really wish clock readings were faster. But
there's enough win here to justify changing anyway.)
A small side benefit is that on most platforms, we can use CLOCK_MONOTONIC
instead of CLOCK_REALTIME and thereby render EXPLAIN impervious to
concurrent resets of the system clock. (This means that code must not
assume that the contents of struct instr_time have any well-defined
interpretation as timestamps, but really that was true before.)
Some platforms offer nonstandard clock IDs that might be of interest.
This patch knows we should use CLOCK_MONOTONIC_RAW on macOS, because it
provides more precision and is faster to read than their CLOCK_MONOTONIC.
If there turn out to be many more cases where we need special rules, it
might be appropriate to handle the selection of clock ID in configure,
but for the moment that doesn't seem worth the trouble.
Discussion: https://postgr.es/m/31856.1400021891@sss.pgh.pa.us
Commit f0e44751d added new node tags at a place in the tag numbering
where there was no daylight left before the next hard-coded number,
resulting in some duplicate tag assignments. This doesn't seem to have
caused any big problem so far, but it's surely trouble waiting to happen.
We could adjust the manually assigned breakpoints to make more room,
but that just leaves the same hazard waiting to strike again in future.
What seems like a better idea is to get rid of the manual assignments
and leave NodeTags to be automatically assigned, consecutively from one
on up. This means that any change in the tag list forces a backend-wide
recompile, but realistically that's usually needed anyway.
Discussion: https://postgr.es/m/29670.1482942811@sss.pgh.pa.us
Most code was casting this through a generic Node. By declaring
everything as RoleSpec appropriately, we can remove a bunch of casts and
ad-hoc node type checking.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Now that it has only INH_NO and INH_YES values, it's just weird that
it's not a plain bool, so make it that way.
Also rename RangeVar.inhOpt to "inh", to be like RangeTblEntry.inh.
My recollection is that we gave it a different name specifically because
it had a different representation than the derived bool value, but it
no longer does. And this is a good forcing function to be sure we
catch any places that are affected by the change.
Bump catversion because of possible effect on stored RangeVar nodes.
I'm not exactly convinced that we ever store RangeVar on disk, but
we have a readfuncs function for it, so be cautious. (If we do do so,
then commit e13486eba was in error not to bump catversion.)
Follow-on to commit e13486eba.
Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com
This is basically for the same reasons I got rid of _hash_wrtbuf()
in commit 25216c98938495fd741bf585dcbef45b3a9ffd40: it's not
convenient to have a function which encapsulates MarkBufferDirty(),
especially as we move towards having hash indexes be WAL-logged.
Patch by me, reviewed (but not entirely endorsed) by Amit Kapila.
The previous coding failed to work correctly when we have a
multi-level partitioned hierarchy where tables at successive levels
have different attribute numbers for the partition key attributes. To
fix, have each PartitionDispatch object store a standalone
TupleTableSlot initialized with the TupleDesc of the corresponding
partitioned table, along with a TupleConversionMap to map tuples from
the its parent's rowtype to own rowtype. After tuple routing chooses
a leaf partition, we must use the leaf partition's tuple descriptor,
not the root table's. To that end, a dedicated TupleTableSlot for
tuple routing is now allocated in EState.
Amit Langote
When the input value to a CoerceToDomain expression node is a read-write
expanded datum, we should pass a read-only pointer to any domain CHECK
expressions and then return the original read-write pointer as the
expression result. Previously we were blindly passing the same pointer to
all the consumers of the value, making it possible for a function in CHECK
to modify or even delete the expanded value. (Since a plpgsql function
will absorb a passed-in read-write expanded array as a local variable
value, it will in fact delete the value on exit.)
A similar hazard of passing the same read-write pointer to multiple
consumers exists in domain_check() and in ExecEvalCase, so fix those too.
The fix requires adding MakeExpandedObjectReadOnly calls at the appropriate
places, which is simple enough except that we need to get the data type's
typlen from somewhere. For the domain cases, solve this by redefining
DomainConstraintRef.tcache as okay for callers to access; there wasn't any
reason for the original convention against that, other than not wanting the
API of typcache.c to be any wider than it had to be. For CASE, there's
no good solution except to add a syscache lookup during executor start.
Per bug #14472 from Marcos Castedo. Back-patch to 9.5 where expanded
values were introduced.
Discussion: https://postgr.es/m/15225.1482431619@sss.pgh.pa.us
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
No more indirect blocks. The blocks form a linked list instead.
This saves some memory, because we don't need to have a buffer in memory to
hold the indirect block (or blocks). To reflect that, TAPE_BUFFER_OVERHEAD
is reduced from 3 to 1 buffer, which allows using more memory for building
the initial runs.
Reviewed by Peter Geoghegan and Robert Haas.
Discussion: https://www.postgresql.org/message-id/34678beb-938e-646e-db9f-a7def5c44ada%40iki.fi
In an attempt to simplify the tsquery matching engine, the original
phrase search patch invented rewrite rules that would rearrange a
tsquery so that no AND/OR/NOT operator appeared below a PHRASE operator.
But this approach had numerous problems. The rearrangement step was
missed by ts_rewrite (and perhaps other places), allowing tsqueries
to be created that would cause Assert failures or perhaps crashes at
execution, as reported by Andreas Seltenreich. The rewrite rules
effectively defined semantics for operators underneath PHRASE that were
buggy, or at least unintuitive. And because rewriting was done in
tsqueryin() rather than at execution, the rearrangement was user-visible,
which is not very desirable --- for example, it might cause unexpected
matches or failures to match in ts_rewrite.
As a somewhat independent problem, the behavior of nested PHRASE operators
was only sane for left-deep trees; queries like "x <-> (y <-> z)" did not
behave intuitively at all.
To fix, get rid of the rewrite logic altogether, and instead teach the
tsquery execution engine to manage AND/OR/NOT below a PHRASE operator
by explicitly computing the match location(s) and match widths for these
operators.
This requires introducing some additional fields into the publicly visible
ExecPhraseData struct; but since there's no way for third-party code to
pass such a struct to TS_phrase_execute, it shouldn't create an ABI problem
as long as we don't move the offsets of the existing fields.
Another related problem was that index searches supposed that "!x <-> y"
could be lossily approximated as "!x & y", which isn't correct because
the latter will reject, say, "x q y" which the query itself accepts.
This required some tweaking in TS_execute_ternary along with the main
tsquery engine.
Back-patch to 9.6 where phrase operators were introduced. While this
could be argued to change behavior more than we'd like in a stable branch,
we have to do something about the crash hazards and index-vs-seqscan
inconsistency, and it doesn't seem desirable to let the unintuitive
behaviors induced by the rewriting implementation stand as precedent.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
If we do not reset the FD_READ event, WaitForMultipleObjects won't
return it again again unless we've meanwhile read from the socket,
which is generally true but not guaranteed. WaitEventSetWaitBlock
itself may fail to return the event to the caller if the latch is
also set, and even if we changed that, the caller isn't obliged to
handle all returned events at once. On non-Windows systems, the
socket-read event is purely level-triggered, so this issue does
not exist. To fix, make Windows reset the event when needed.
This bug was introduced by 98a64d0bd7,
and causes hangs when trying to use the pldebugger extension.
Patch by Amit Kapial. Reported and tested by Ashutosh Sharma, who
also provided some analysis. Further analysis by Michael Paquier.
On AIX, doubles are aligned at 4 bytes, but int64 is aligned at 8 bytes.
Our code assumes that doubles have alignment that can also be applied to
int64, but that fails in this case. One effect is that
heap_form_tuple() writes tuples in a different layout than
Form_pg_sequence expects.
Rather than rewrite the whole alignment code, work around the issue by
reordering the columns in pg_sequence so that the first int64 column
naturally comes out at an 8-byte boundary.
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
A bucket squeeze operation needs to lock each page of the bucket
before releasing the prior page, but the previous coding fumbled the
locking when freeing an overflow page during a bucket squeeze
operation. Commit 6d46f4783e
introduced this bug.
Amit Kapila, with help from Kuntal Ghosh and Dilip Kumar, after
an initial trouble report by Jeff Janes. Reviewed by me. I also
fixed a problem with a comment.
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
I got frustrated by the lack of commentary in this area, so here is some
reverse-engineered documentation, along with minor stylistic cleanup.
No code changes more significant than removal of unused variables.
Back-patch to 9.6, not because that's useful in itself, but because
we have some bugs to fix in phrase search and this would cause merge
failures if it's only in HEAD.
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
Commit 5dfc198146 introduced the use
of a new type of hash table with linear reprobing for hash aggregates.
Such a hash table behaves very poorly if keys are inserted in hash
order, which does in fact happen in the case where a query use a
Finalize HashAggregate node fed (via Gather) by a Partial
HashAggregate node. In fact, queries with this type of plan tend
to run effectively forever.
Fix that by seeding the hash value differently in each worker
(and in the leader, if it participates).
Andres Freund and Robert Haas
The whole concept of _hash_wrtbuf() is that we need to know at the
time we're releasing the buffer lock (and pin) whether we dirtied the
buffer, but this is easy to get wrong. This patch actually fixes one
non-obvious bug of that form: hashbucketcleanup forgot to signal
_hash_squeezebucket, which gets the primary bucket page already
locked, as to whether it had already dirtied the page. Calling
MarkBufferDirty() at the places where we dirty the buffer is more
intuitive and lets us simplify the code in various places as well.
On top of all that, the ultimate goal here is to make hash indexes
WAL-logged, and as the comments to _hash_wrtbuf() note, it should
go away when that happens. Making it go away a little earlier than
that seems like a good preparatory step.
Report by Jeff Janes. Diagnosis by Amit Kapila, Kuntal Ghosh,
and Dilip Kumar. Patch by me, after studying an alternative patch
submitted by Amit Kapila.
Discussion: http://postgr.es/m/CAA4eK1Kf6tOY0oVz_SEdngiNFkeXrA3xUSDPPORQvsWVPdKqnA@mail.gmail.com
Previously, the "sem" field of PGPROC varied in size depending on which
kernel semaphore API we were using. That was okay as long as there was
only one likely choice per platform, but in the wake of commit ecb0d20a9,
that assumption seems rather shaky. It doesn't seem out of the question
anymore that an extension compiled against one API choice might be loaded
into a postmaster built with another choice. Moreover, this prevents any
possibility of selecting the semaphore API at postmaster startup, which
might be something we want to do in future.
Hence, change PGPROC.sem to be PGSemaphore (i.e. a pointer) for all Unix
semaphore APIs, and turn the pointed-to data into an opaque struct whose
contents are only known within the responsible modules.
For the SysV and unnamed-POSIX APIs, the pointed-to data has to be
allocated elsewhere in shared memory, which takes a little bit of
rejiggering of the InitShmemAllocation code sequence. (I invented a
ShmemAllocUnlocked() function to make that a little cleaner than it used
to be. That function is not meant for any uses other than the ones it
has now, but it beats having InitShmemAllocation() know explicitly about
allocation of space for semaphores and spinlocks.) This change means an
extra indirection to access the semaphore data, but since we only touch
that when blocking or awakening a process, there shouldn't be any
meaningful performance penalty. Moreover, at least for the unnamed-POSIX
case on Linux, the sem_t type is quite a bit wider than a pointer, so this
reduces sizeof(PGPROC) which seems like a good thing.
For the named-POSIX API, there's effectively no change: the PGPROC.sem
field was and still is a pointer to something returned by sem_open() in
the postmaster's memory space. Document and check the pre-existing
limitation that this case can't work in EXEC_BACKEND mode.
It did not seem worth unifying the Windows semaphore ABI with the Unix
cases, since there's no likelihood of needing ABI compatibility much less
runtime switching across those cases. However, we can simplify the Windows
code a bit if we define PGSemaphore as being directly a HANDLE, rather than
pointer to HANDLE, so let's do that while we're here. (This also ends up
being no change in what's physically stored in PGPROC.sem. We're just
moving the HANDLE fetch from callees to callers.)
It would take a bunch of additional code shuffling to get to the point of
actually choosing a semaphore API at postmaster start, but the effects
of that would now be localized in the port/XXX_sema.c files, so it seems
like fit material for a separate patch. The need for it is unproven as
yet, anyhow, whereas the ABI risk to extensions seems real enough.
Discussion: https://postgr.es/m/4029.1481413370@sss.pgh.pa.us
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Split md5_crypt_verify() into three functions:
* get_role_password() to fetch user's password from pg_authid, and check
its expiration.
* md5_crypt_verify() to check an MD5 authentication challenge
* plain_crypt_verify() to check a plaintext password.
get_role_password() will be needed as a separate function by the upcoming
SCRAM authentication patch set. Most of the remaining functionality in
md5_crypt_verify() was different for MD5 and plaintext authentication, so
split that for readability.
While we're at it, simplify the *_crypt_verify functions by using
stack-allocated buffers to hold the temporary MD5 hashes, instead of
pallocing.
Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/3029e460-d47c-710e-507e-d8ba759d7cbb@iki.fi
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint. It's cheap for transformValuesClause
to determine the common typmod while transforming a multi-row VALUES, but
it'd be less cheap for expandRTE() and get_rte_attribute_type() to
re-determine that info every time they're asked --- possibly a lot less
cheap, if the VALUES has many rows. Therefore, the best fix is to record
the common typmods explicitly in a list in the VALUES RTE, as we were
already doing for column collations. This looks quite a bit like what
we're doing for CTE RTEs, so we can save a little bit of space and code by
unifying the representation for those two RTE types. They both now share
coltypes/coltypmods/colcollations fields. (At some point it might seem
desirable to populate those fields for all RTE types; but right now it
looks like constructing them for other RTE types would add more code and
cycles than it would save.)
The RTE change requires a catversion bump, so this fix is only usable
in HEAD. If we fix this at all in the back branches, the patch will
need to look quite different.
Report: https://postgr.es/m/20161205143037.4377.60754@wrigleys.postgresql.org
Discussion: https://postgr.es/m/27429.1480968538@sss.pgh.pa.us
Commit fe0a0b59, which moved code to do MD5 authentication to a separate
CheckMD5Auth() function, left behind a comment that really belongs inside
the function, too. Also move the check for db_user_namespace inside the
function, seems clearer that way.
Now that the md5 salt is passed as argument to md5_crypt_verify, it's a bit
silly that it peeks into the Port struct to see if MD5 authentication was
used. Seems more straightforward to treat it as an MD5 authentication, if
the md5 salt argument is given. And after that, md5_crypt_verify only used
the Port argument to look at port->user_name, but that is redundant,
because it is also passed as a separate 'role' argument. So remove the Port
argument altogether.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
If we're going to write a semicolon after calls of relptr_declare(),
then we don't need one inside the macro, and removing it suppresses
"empty declaration" warnings from pickier compilers (eg pademelon).
While at it, we might as well use relptr() inside relptr_declare(),
because otherwise that macro would likely go unused altogether.
Also improve the comment, which I for one found unclear,
and provide a specific example of intended usage.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
On 32-bit systems, don't try to use 64-bit DSA pointers, because the
computation of DSA_MAX_SEGMENT_SIZE overflows Size.
Cast 1 to Size before shifting it, so that the compiler doesn't
produce a result of the wrong width.
In passing, change one use of size_t to Size.
Commit 13df76a537 was overconfident
about how portable %016lx is. Some compilers complain because they
need %016llx, while platforms where DSA pointers are only 32 bits
get unhappy about using a 64-bit format for a 32-bit quantity.
Thomas Munro, per an off-list suggestion from me.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
deleteWhatDependsOn() had grown an uncomfortably large number of
assumptions about what it's used for. There are actually only two minor
differences between what it does and what a regular performDeletion() call
can do, so let's invent additional bits in performDeletion's existing flags
argument that specify those behaviors, and get rid of deleteWhatDependsOn()
as such. (We'd probably have done it this way from the start, except that
performDeletion didn't originally have a flags argument, IIRC.)
Also, add a SKIP_EXTENSIONS flag bit that prevents ever recursing to an
extension, and use that when dropping temporary objects at session end.
This provides a more general solution to the problem addressed in a hacky
way in commit 08dd23cec: if an extension script creates temp objects and
forgets to remove them again, the whole extension went away when its
contained temp objects were deleted. The previous solution only covered
temp relations, but this solves it for all object types.
These changes require minor additions in dependency.c to pass the flags
to subroutines that previously didn't get them, but it's still a net
savings of code, and it seems cleaner than before.
Having done this, revert the special-case code added in 08dd23cec that
prevented addition of pg_depend records for temp table extension
membership, because that caused its own oddities: dropping an extension
that had created such a table didn't automatically remove the table,
leading to a failure if the table had another dependency on the extension
(such as use of an extension data type), or to a duplicate-name failure if
you then tried to recreate the extension. But we keep the part that
prevents the pg_temp_nnn schema from becoming an extension member; we never
want that to happen. Add a regression test case covering these behaviors.
Although this fixes some arguable bugs, we've heard few field complaints,
and any such problems are easily worked around by explicitly dropping temp
objects at the end of extension scripts (which seems like good practice
anyway). So I won't risk a back-patch.
Discussion: https://postgr.es/m/e51f4311-f483-4dd0-1ccc-abec3c405110@BlueTreble.com
Programmers discovered decades ago that it was useful to have a simple
interface for allocating and freeing memory, which is why malloc() and
free() were invented. Unfortunately, those handy tools don't work
with dynamic shared memory segments because those are specific to
PostgreSQL and are not necessarily mapped at the same address in every
cooperating process. So invent our own allocator instead. This makes
it possible for processes cooperating as part of parallel query
execution to allocate and free chunks of memory without having to
reserve them prior to the start of execution. It could also be used
for longer lived objects; for example, we could consider storing data
for pg_stat_statements or the stats collector in shared memory using
these interfaces, rather than writing them to files. Basically,
anything that needs shared memory but can't predict in advance how
much it's going to need might find this useful.
Thomas Munro and Robert Haas. The original code (of mine) on which
Thomas based his work was actually designed to be a new backend-local
memory allocator for PostgreSQL, but that hasn't gone anywhere - or
not yet, anyway. Thomas took that work and performed major
refactoring and extensive modifications to make it work with dynamic
shared memory, including the addition of appropriate locking.
Discussion: CA+TgmobkeWptGwiNa+SGFWsTLzTzD-CeLz0KcE-y6LFgoUus4A@mail.gmail.com
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
This is intended as infrastructure for a full-fledged allocator for
dynamic shared memory. The interface looks a bit like a real
allocator, but only supports allocating and freeing memory in
multiples of the 4kB page size. Further, to free memory, you must
know the size of the span you wish to free, in pages. While these are
make it unsuitable as an allocator in and of itself, it still serves
as very useful scaffolding for a full-fledged allocator.
Robert Haas and Thomas Munro. This code is mostly the same as my 2014
submission, but Thomas fixed quite a few bugs and made some changes to
the interface.
Discussion: CA+TgmobkeWptGwiNa+SGFWsTLzTzD-CeLz0KcE-y6LFgoUus4A@mail.gmail.com
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
C doesn't have any sort of built-in understanding of a pointer
relative to some arbitrary base address, but dynamic shared memory
segments can be mapped at different addresses in different processes,
so any sort of shared data structure stored within a dynamic shared
memory segment can't use absolute pointers. We could use something
like Size to represent a relative pointer, but then the compiler
provides no type-checking. Use stupid macro tricks to get some
type-checking.
Patch originally by me. Concept suggested by Andres Freund. Recently
resubmitted as part of Thomas Munro's work on dynamic shared memory
allocation.
Discussion: 20131205144434.GG12398@alap2.anarazel.de
Discussion: CAEepm=1z5WLuNoJ80PaCvz6EtG9dN0j-KuHcHtU6QEfcPP5-qA@mail.gmail.com
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Our documentation states that our maximum field size is 1 GB, and that
our maximum row size of 1.6 TB. However, while this might be attainable
in theory with enough contortions, it is not workable in practice; for
starters, pg_dump fails to dump tables containing rows larger than 1 GB,
even if individual columns are well below the limit; and even if one
does manage to manufacture a dump file containing a row that large, the
server refuses to load it anyway.
This commit enables dumping and reloading of such tuples, provided two
conditions are met:
1. no single column is larger than 1 GB (in output size -- for bytea
this includes the formatting overhead)
2. the whole row is not larger than 2 GB
There are three related changes to enable this:
a. StringInfo's API now has two additional functions that allow creating
a string that grows beyond the typical 1GB limit (and "long" string).
ABI compatibility is maintained. We still limit these strings to 2 GB,
though, for reasons explained below.
b. COPY now uses long StringInfos, so that pg_dump doesn't choke
trying to emit rows longer than 1GB.
c. heap_form_tuple now uses the MCXT_ALLOW_HUGE flag in its allocation
for the input tuple, which means that large tuples are accepted on
input. Note that at this point we do not apply any further limit to the
input tuple size.
The main reason to limit to 2 GB is that the FE/BE protocol uses 32 bit
length words to describe each row; and because the documentation is
ambiguous on its signedness and libpq does consider it signed, we cannot
use the highest-order bit. Additionally, the StringInfo API uses "int"
(which is 4 bytes wide in most platforms) in many places, so we'd need
to change that API too in order to improve, which has lots of fallout.
Backpatch to 9.5, which is the oldest that has
MemoryContextAllocExtended, a necessary piece of infrastructure. We
could apply to 9.4 with very minimal additional effort, but any further
than that would require backpatching "huge" allocations too.
This is the largest set of changes we could find that can be
back-patched without breaking compatibility with existing systems.
Fixing a bigger set of problems (for example, dumping tuples bigger than
2GB, or dumping fields bigger than 1GB) would require changing the FE/BE
protocol and/or changing the StringInfo API in an ABI-incompatible way,
neither of which would be back-patchable.
Authors: Daniel Vérité, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/20160229183023.GA286012@alvherre.pgsql
The whole walreceiver API is now wrapped into a struct, like most of our
other loadable module APIs. The libpq connection is no longer a global
variable in libpqwalreceiver. Instead, it is encapsulated into a struct
that is passed around the functions. This allows multiple walreceivers
to run at the same time.
Add some rudimentary support for logical replication connections to
libpqwalreceiver.
These changes are mostly cosmetic and are going to be useful for the
future logical replication patches.
From: Petr Jelinek <petr@2ndquadrant.com>
Replace use of poll()/select() by WaitLatchOrSocket(), which is more
portable and flexible.
Also change walreceiver to use its procLatch instead of a custom latch.
From: Petr Jelinek <petr@2ndquadrant.com>
So far the hashtable stored representative tuples in the form of its
input slot, with all columns in the hashtable that are not
needed (i.e. not grouped upon or functionally dependent) set to NULL.
Thats good for saving memory, but it turns out that having tuples full
of NULL isn't free. slot_deform_tuple is faster if there's no NULL
bitmap even if no NULLs are encountered, and skipping over leading NULLs
isn't free.
So compute a separate tuple descriptor that only contains the needed
columns. As columns have already been moved in/out the slot for the
hashtable that does not imply additional per-row overhead.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously we did a ExecProject() for each individual aggregate
argument. That turned out to be a performance bottleneck in queries with
multiple aggregates.
Doing all the argument computations in one ExecProject() is quite a bit
cheaper because ExecProject's fastpath can do the work at once in a
relatively tight loop, and because it can get all the required columns
with a single slot_getsomeattr and save some other redundant setup
costs.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously, the right to split a bucket was represented by a
heavyweight lock on the page number of the primary bucket page.
Unfortunately, this meant that every scan needed to take a heavyweight
lock on that bucket also, which was bad for concurrency. Instead, use
a cleanup lock on the primary bucket page to indicate the right to
begin a split, so that scans only need to retain a pin on that page,
which is they would have to acquire anyway, and which is also much
cheaper.
In addition to reducing the locking cost, this also avoids locking out
scans and inserts for the entire lifetime of the split: while the new
bucket is being populated with copies of the appropriate tuples from
the old bucket, scans and inserts can happen in parallel. There are
minor concurrency improvements for vacuum operations as well, though
the situation there is still far from ideal.
This patch also removes the unworldly assumption that a split will
never be interrupted. With the new code, a split is done in a series
of small steps and the system can pick up where it left off if it is
interrupted prior to completion. While this patch does not itself add
write-ahead logging for hash indexes, it is clearly a necessary first
step, since one of the things that could interrupt a split is the
removal of electrical power from the machine performing it.
Amit Kapila. I wrote the original design on which this patch is
based, and did a good bit of work on the comments and README through
multiple rounds of review, but all of the code is Amit's. Also
reviewed by Jesper Pedersen, Jeff Janes, and others.
Discussion: http://postgr.es/m/CAA4eK1LfzcZYxLoXS874Ad0+S-ZM60U9bwcyiUZx9mHZ-KCWhw@mail.gmail.com
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
A new thing also called a "barrier" is proposed, but whether we decide
to take that patch or not, this file seems to have outlived its
usefulness.
Thomas Munro
Previously, the right-hand side of a multiple-column assignment, if it
wasn't a sub-SELECT, had to be a simple parenthesized expression list,
because gram.y was responsible for "bursting" the construct into
independent column assignments. This had the minor defect that you
couldn't write ROW (though you should be able to, since the standard says
this is a row constructor), and the rather larger defect that unlike other
uses of row constructors, we would not expand a "foo.*" item into multiple
columns.
Fix that by changing the RHS to be just "a_expr" in the grammar, leaving
it to transformMultiAssignRef to separate the elements of a RowExpr;
which it will do only after performing standard transformation of the
RowExpr, so that "foo.*" behaves as expected.
The key reason we didn't do that before was the hard-wired handling of
DEFAULT tokens (SetToDefault nodes). This patch deals with that issue by
allowing DEFAULT in any a_expr and having parse analysis throw an error
if SetToDefault is found in an unexpected place. That's an improvement
anyway since the error can be more specific than just "syntax error".
The SQL standard suggests that the RHS could be any a_expr yielding a
suitable row value. This patch doesn't really move the goal posts in that
respect --- you're still limited to RowExpr or a sub-SELECT --- but it does
fix the grammar restriction, so it provides some tangible progress towards
a full implementation. And the limitation is now documented by an explicit
error message rather than an unhelpful "syntax error".
Discussion: <8542.1479742008@sss.pgh.pa.us>
Condition variables provide a flexible way to sleep until a
cooperating process causes an arbitrary condition to become true. In
simple cases, this can be accomplished with a WaitLatch/ResetLatch
loop; the cooperating process can call SetLatch after performing work
that might cause the condition to be satisfied, and the waiting
process can recheck the condition each time. However, if the process
performing the work doesn't have an easy way to identify which
processes might be waiting, this doesn't work, because it can't
identify which latches to set. Condition variables solve that problem
by internally maintaining a list of waiters; a process that may have
caused some waiter's condition to be satisfied must "signal" or
"broadcast" on the condition variable.
Robert Haas and Thomas Munro
Like pg_tables, pg_views, and others, this view contains information
about sequences in a way that is independent of the system catalog
layout but more comprehensive than the information schema.
To help implement the view, add a new internal function
pg_sequence_last_value() to return the last value of a sequence. This
is kept separate from pg_sequence_parameters() to separate querying
run-time state from catalog-like information.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Previously, the handle for the control segment could not be zero, but
some other DSM segment could potentially have a handle value of zero.
However, that means that if someone wanted to store a dsm_handle that
might or might not be valid, they would need a separate boolean to
keep track of whether the associated value is legal. That's annoying,
so change things so that no DSM segment can ever have a handle of 0 -
or as we call it here, DSM_HANDLE_INVALID.
Thomas Munro. This was submitted as part of a much larger patch to
add an malloc-like allocator for dynamic shared memory, but this part
seems like a good idea independently of the rest of the patch.
The CatalogSnapshot was not plugged into SnapshotResetXmin()'s accounting
for whether MyPgXact->xmin could be cleared or advanced. In normal
transactions this was masked by the fact that the transaction snapshot
would be older, but during backend startup and certain utility commands
it was possible to re-use the CatalogSnapshot after MyPgXact->xmin had
been cleared, meaning that recently-deleted rows could be pruned even
though this snapshot could still see them, causing unexpected catalog
lookup failures. This effect appears to be the explanation for a recent
failure on buildfarm member piculet.
To fix, add the CatalogSnapshot to the RegisteredSnapshots heap whenever
it is valid.
In the previous logic, it was possible for the CatalogSnapshot to remain
valid across waits for client input, but with this change that would mean
it delays advance of global xmin in cases where it did not before. To
avoid possibly causing new table-bloat problems with clients that sit idle
for long intervals, add code to invalidate the CatalogSnapshot before
waiting for client input. (When the backend is busy, it's unlikely that
the CatalogSnapshot would be the oldest snap for very long, so we don't
worry about forcing early invalidation of it otherwise.)
In passing, remove the CatalogSnapshotStale flag in favor of using
"CatalogSnapshot != NULL" to represent validity, as we do for the other
special snapshots in snapmgr.c. And improve some obsolete comments.
No regression test because I don't know a deterministic way to cause this
failure. But the stress test shown in the original discussion provokes
"cache lookup failed for relation 1255" within a few dozen seconds for me.
Back-patch to 9.4 where MVCC catalog scans were introduced. (Note: it's
quite easy to produce similar failures with the same test case in branches
before 9.4. But MVCC catalog scans were supposed to fix that.)
Discussion: <16447.1478818294@sss.pgh.pa.us>
Be sure to pull up the subquery's hasRowSecurity flag when flattening a
subquery in pull_up_simple_subquery(). This isn't a bug today because
we don't look at the hasRowSecurity flag during planning, but it could
easily be a bug tomorrow.
Likewise, make rewriteRuleAction() pull up the hasRowSecurity flag when
absorbing RTEs from a rule action. This isn't a bug either, for the
opposite reason: the flag should never be set yet. But again, it seems
like good future proofing.
Add a comment explaining why rewriteTargetView() should *not* set
hasRowSecurity when adding stuff to securityQuals.
Improve some nearby comments about securityQuals processing, and document
that field more completely in parsenodes.h.
Patch by me, analysis by Dean Rasheed.
Discussion: <CAEZATCXZ8tb2DV6f=bkhsMV6u_gRcZ0CZBw2J-qU84RxSukZog@mail.gmail.com>
The reloptions stuff allows this option to be set on a matview.
While it's questionable whether that is useful or was really intended,
it does work, and we shouldn't change that in minor releases. Commit
e3e66d8a9 disabled the option since I didn't realize that it was
possible for it to be set on a matview. Tweak the test to re-allow it.
Discussion: <19749.1478711862@sss.pgh.pa.us>
The idea behind SPI_push was to allow transitioning back into an
"unconnected" state when a SPI-using procedure calls unrelated code that
might or might not invoke SPI. That sounds good, but in practice the only
thing it does for us is to catch cases where a called SPI-using function
forgets to call SPI_connect --- which is a highly improbable failure mode,
since it would be exposed immediately by direct testing of said function.
As against that, we've had multiple bugs induced by forgetting to call
SPI_push/SPI_pop around code that might invoke SPI-using functions; these
are much harder to catch and indeed have gone undetected for years in some
cases. And we've had to band-aid around some problems of this ilk by
introducing conditional push/pop pairs in some places, which really kind
of defeats the purpose altogether; if we can't draw bright lines between
connected and unconnected code, what's the point?
Hence, get rid of SPI_push[_conditional], SPI_pop[_conditional], and the
underlying state variable _SPI_curid. It turns out SPI_restore_connection
can go away too, which is a nice side benefit since it was never more than
a kluge. Provide no-op macros for the deleted functions so as to avoid an
API break for external modules.
A side effect of this removal is that SPI_palloc and allied functions no
longer permit being called when unconnected; they'll throw an error
instead. The apparent usefulness of the previous behavior was a mirage
as well, because it was depended on by only a few places (which I fixed in
preceding commits), and it posed a risk of allocations being unexpectedly
long-lived if someone forgot a SPI_push call.
Discussion: <20808.1478481403@sss.pgh.pa.us>
Invent a new function heap_modify_tuple_by_cols() that is functionally
equivalent to SPI_modifytuple except that it always allocates its result
by simple palloc. I chose however to make the API details a bit more
like heap_modify_tuple: pass a tupdesc rather than a Relation, and use
bool convention for the isnull array.
Use this function in place of SPI_modifytuple at all call sites where the
intended behavior is to allocate in current context. (There actually are
only two call sites left that depend on the old behavior, which makes me
wonder if we should just drop this function rather than keep it.)
This new function is easier to use than heap_modify_tuple() for purposes
of replacing a single column (or, really, any fixed number of columns).
There are a number of places where it would simplify the code to change
over, but I resisted that temptation for the moment ... everywhere except
in plpgsql's exec_assign_value(); changing that might offer some small
performance benefit, so I did it.
This is on the way to removing SPI_push/SPI_pop, but it seems like
good code cleanup in its own right.
Discussion: <9633.1478552022@sss.pgh.pa.us>
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
This reverts commit c8ead2a397.
Seems there is no way to do this that doesn't cause MSVC to give
warnings, so let's just go back to the way we've been doing it.
Discussion: <11843.1478358206@sss.pgh.pa.us>
Second try at the change originally made in commit 8518583cd;
this time with contrib updates so that manual extern declarations
are also marked with PGDLLEXPORT. The release notes should point
this out as a significant source-code change for extension authors,
since they'll have to make similar additions to avoid trouble on Windows.
Laurenz Albe, doc change by me
Patch: <A737B7A37273E048B164557ADEF4A58B53962ED8@ntex2010a.host.magwien.gv.at>
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
LockBufferForCleanup() acquires a cleanup lock unconditionally, and
ConditionalLockBufferForCleanup() acquires a cleanup lock if it is
possible to do so without waiting; this patch adds a new API,
IsBufferCleanupOK(), which tests whether an exclusive lock already
held happens to be a cleanup lock. This is possible because a cleanup
lock simply means an exclusive lock plus the assurance any other pins
on the buffer are newer than our own pin. Therefore, just as the
existing functions decide that the exclusive lock that they've just
taken is a cleanup lock if they observe the pin count to be 1, this
new function allows us to observe that the pin count is 1 on a buffer
we've already locked.
This is useful in situations where a backend definitely wishes to
modify the buffer and also wishes to perform cleanup operations if
possible. The patch to eliminate heavyweight locking by hash indexes
uses this, and it may have other applications as well.
Amit Kapila, per a suggestion from me. Some comment adjustments by me
as well.
Commit 2bd9e412f9 added these in error.
They were part of an earlier design for that patch and survived in the
committed version only by inadvertency.
Julien Rouhaud
This will write the received transaction log into a file called
pg_wal.tar(.gz) next to the other tarfiles instead of writing it to
base.tar. When using fetch mode, the transaction log is still written to
base.tar like before, and when used against a pre-10 server, the file
is named pg_xlog.tar.
To do this, implement a new concept of a "walmethod", which is
responsible for writing the WAL. Two implementations exist, one that
writes to a plain directory (which is also used by pg_receivexlog) and
one that writes to a tar file with optional compression.
Reviewed by Michael Paquier
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
This reverts commit 9e083fd468. That was a
few bricks shy of a load:
* Query cancel stopped working
* Buildfarm member pademelon stopped working, because the box doesn't have
/dev/urandom nor /dev/random.
This clearly needs some more discussion, and a quite different patch, so
revert for now.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
- /dev/random
Original patch by Magnus Hagander, with further work by Michael Paquier
and me.
Discussion: <CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com>
The more efficient hashtable speeds up hash-aggregations with more than
a few hundred groups significantly. Improvements of over 120% have been
measured.
Due to the the different hash table queries that not fully
determined (e.g. GROUP BY without ORDER BY) may change their result
order.
The conversion is largely straight-forward, except that, due to the
static element types of simplehash.h type hashes, the additional data
some users store in elements (e.g. the per-group working data for hash
aggregaters) is now stored in TupleHashEntryData->additional. The
meaning of BuildTupleHashTable's entrysize (renamed to additionalsize)
has been changed to only be about the additionally stored size. That
size is only used for the initial sizing of the hash-table.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
dynahash.c hash tables aren't quite fast enough for some
use-cases. There are several reasons for lacking performance:
- the use of chaining for collision handling makes them cache
inefficient, that's especially an issue when the tables get bigger.
- as the element sizes for dynahash are only determined at runtime,
offset computations are somewhat expensive
- hash and element comparisons are indirect function calls, causing
unnecessary pipeline stalls
- it's two level structure has some benefits (somewhat natural
partitioning), but increases the number of indirections
to fix several of these the hash tables have to be adjusted to the
individual use-case at compile-time. C unfortunately doesn't provide a
good way to do compile code generation (like e.g. c++'s templates for
all their weaknesses do). Thus the somewhat ugly approach taken here is
to allow for code generation using a macro-templatized header file,
which generates functions and types based on a prefix and other
parameters.
Later patches use this infrastructure to use such hash tables for
tidbitmap.c (bitmap scans) and execGrouping.c (hash aggregation,
...). In queries where these use up a large fraction of the time, this
has been measured to lead to performance improvements of over 100%.
There are other cases where this could be useful (e.g. catcache.c).
The hash table design chosen is a variant of linear open-addressing. The
biggest disadvantage of simple linear addressing schemes are highly
variable lookup times due to clustering, and deletions leaving a lot of
tombstones around. To address these issues a variant of "robin hood"
hashing is employed. Robin hood hashing optimizes chaining lengths by
moving elements close to their optimal bucket ("rich" elements), out of
the way if a to-be-inserted element is further away from its optimal
position (i.e. it's "poor"). While that can make insertions slower, the
average lookup performance is a lot better, and higher fill factors can
be used in a still performant manner. To avoid tombstones - which
normally solve the issue that a deleted node's presence is relevant to
determine whether a lookup needs to continue looking or is done -
buckets following a deleted element are shifted backwards, unless
they're empty or already at their optimal position.
There's further possible improvements that can be made to this
implementation. Amongst others:
- Use distance as a termination criteria during searches. This is
generally a good idea, but I've been able to see the overhead of
distance calculations in some cases.
- Consider combining the 'empty' status into the hashvalue, and enforce
storing the hashvalue. That could, in some cases, increase memory
density and remove a few instructions.
- Experiment further with the, very conservatively choosen, fillfactor.
- Make maximum size of hashtable configurable, to allow storing very
very large tables. That'd require 64bit hash values to be more common
than now, though.
- some smaller memcpy calls could be optimized to copy larger chunks
But since the new implementation is already considerably faster than
dynahash it seem sensible to start using it.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
These are useful for very hot code paths. Because it's easy to guess
wrongly about likelihood, and because such likelihoods change over time,
they should be used sparingly.
Past tests have shown it'd be a good idea to use them in some places,
e.g. in error checks around ereports that ERROR out, but that's work for
later.
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
This turns out not to be as harmless as I thought: MSVC will complain
if it sees an "extern" declaration without PGDLLEXPORT and then one with.
(Seems fairly silly, given that this can be changed after the fact by the
linker, but there you have it.) Therefore, contrib modules that have
extern's for V1 functions in header files are falling over in the
buildfarm, since none of those externs are marked PGDLLEXPORT.
We might or might not conclude that we're willing to plaster those
declarations with PGDLLEXPORT in HEAD, but in any case there's no way we're
going to ship this change in the back branches. Third-party authors would
not thank us for breaking their code in a minor release. Hence, revert
the addition of PGDLLEXPORT (but let's keep the extra info in the comment).
If we do the other changes we can revert this commit in HEAD.
Per buildfarm.
These functions were originally added in commit d8cedf67a to support
use of int2vector columns as catcache lookup keys. However, there are
no catcaches that use such columns. (Indeed I now think it must always
have been dead code: a catcache with such a key column would need an
underlying unique index on the column, but we've never had an int2vector
btree opclass.)
Getting rid of the int2vector-specific operator and function does not
lose any functionality, because operations on int2vectors will now fall
back to the generic anyarray support. This avoids a wart that a btree
index on an int2vector column (made using anyarray_ops) would fail to
match equality searches, because int2vectoreq wasn't a member of the
opclass. We don't really care much about that, since int2vector is not
meant as a type for users to use, but it's silly to have extra code and
less functionality.
If we ever do want a catcache to be indexed by an int2vector column,
we'd need to put back full btree and hash opclasses for int2vector,
comparable to the support for oidvector. (The anyarray code can't be
used at such a low level, because it needs to do catcache lookups.)
But we'll deal with that if/when the need arises.
Also worth noting is that removal of the hash int2vector_ops opclass will
break any user-created hash indexes on int2vector columns. While hash
anyarray_ops would serve the same purpose, it would probably not compute
the same hash values and thus wouldn't be on-disk-compatible. Given that
int2vector isn't a user-facing type and we're planning other incompatible
changes in hash indexes for v10 anyway, this doesn't seem like something
to worry about, but it's probably worth mentioning here.
Amit Langote
Discussion: <d9bb74f8-b194-7307-9ebd-90645d377e45@lab.ntt.co.jp>
This isn't really necessary for our own code, because we use a .DEF file
in MSVC builds (see gendef.pl), or --export-all-symbols in MinGW and
Cygwin builds, to ensure that all global symbols in loadable modules
will be exported on Windows. However, third-party authors might use
different build processes that need this marker, and it's harmless
enough for our own builds.
To some extent, this is an oversight in commit e7128e8db, so back-patch
to 9.4 where that was added.
Laurenz Albe
Discussion: <A737B7A37273E048B164557ADEF4A58B539300BD@ntex2010a.host.magwien.gv.at>
Pass the buffer size as argument to LogicalTapeRewindForRead, rather than
setting it earlier with the separate LogicTapeAssignReadBufferSize call.
This way, the buffer size is set closer to where it's actually used, which
makes the code easier to understand.
This makes the calculation for how much memory to use for the buffers less
precise. We now use the same amount of memory for every tape, rounded down
to the nearest BLCKSZ boundary, instead of using one more block for some
tapes, to get the total up to exact amount of memory available. That should
be OK, merging isn't too sensitive to the exact amount of memory used.
Reviewed by Peter Geoghegan
Discussion: <0f607c4b-df23-353e-bf56-c0389d28495f@iki.fi>
While this isn't a lot of code, it's been essentially untestable for
a very long time, because libpq doesn't support anything older than
protocol 2.0, and has not since release 6.3. There's no reason to
believe any other client-side code still uses that protocol, either.
Discussion: <2661.1475849167@sss.pgh.pa.us>
SCO OpenServer and SCO UnixWare are more or less dead platforms.
We have never had a buildfarm member testing the "sco" port, and
the last "unixware" member was last heard from in 2012, so it's
fair to doubt that the code even compiles anymore on either one.
Remove both ports. We can always undo this if someone shows up
with an interest in maintaining and testing these platforms.
Discussion: <17177.1476136994@sss.pgh.pa.us>
I somehow had assumed that in the spinlock (in turn possibly using
semaphores) based fallback atomics implementation 32 bit writes could be
done without a lock. As far as the write goes that's correct, since
postgres supports only platforms with single-copy atomicity for aligned
32bit writes. But writing without holding the spinlock breaks
read-modify-write operations like pg_atomic_compare_exchange_u32(),
since they'll potentially "miss" a concurrent write, which can't happen
in actual hardware implementations.
In 9.6+ when using the fallback atomics implementation this could lead
to buffer header locks not being properly marked as released, and
potentially some related state corruption. I don't see a related danger
in 9.5 (earliest release with the API), because pg_atomic_write_u32()
wasn't used in a concurrent manner there.
The state variable of local buffers, before this change, were
manipulated using pg_atomic_write_u32(), to avoid unnecessary
synchronization overhead. As that'd not be the case anymore, introduce
and use pg_atomic_unlocked_write_u32(), which does not correctly
interact with RMW operations.
This bug only caused issues when postgres is compiled on platforms
without atomics support (i.e. no common new platform), or when compiled
with --disable-atomics, which explains why this wasn't noticed in
testing.
Reported-By: Tom Lane
Discussion: <14947.1475690465@sss.pgh.pa.us>
Backpatch: 9.5-, where the atomic operations API was introduced.
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Commit 88e982302 invented GUC_UNIT_XSEGS for min_wal_size and max_wal_size,
but neglected to make it display sensibly in pg_settings.unit (by adding a
case to the switch in GetConfigOptionByNum). Fix that, and adjust said
switch to throw a run-time error the next time somebody forgets.
In passing, avoid using a static buffer for the output string --- the rest
of this function pstrdup's from a local buffer, and I see no very good
reason why the units code should do it differently and less safely.
Per report from Otar Shavadze. Back-patch to 9.5 where the new unit type
was added.
Report: <CAG-jOyA=iNFhN+yB4vfvqh688B7Tr5SArbYcFUAjZi=0Exp-Lg@mail.gmail.com>
Don't pre-read tuples into SortTuple slots during merge. Instead, use the
memory for larger read buffers in logtape.c. We're doing the same number
of READTUP() calls either way, but managing the pre-read SortTuple slots
is much more complicated. Also, the on-tape representation is more compact
than SortTuples, so we can fit more pre-read tuples into the same amount
of memory this way. And we have better cache-locality, when we use just a
small number of SortTuple slots.
Now that we only hold one tuple from each tape in the SortTuple slots, we
can greatly simplify the "batch memory" management. We now maintain a
small set of fixed-sized slots, to hold the tuples, and fall back to
palloc() for larger tuples. We use this method during all merge phases,
not just the final merge, and also when randomAccess is requested, and
also in the TSS_SORTEDONTAPE case. In other words, it's used whenever we
do an external sort.
Reviewed by Peter Geoghegan and Claudio Freire.
Discussion: <CAM3SWZTpaORV=yQGVCG8Q4axcZ3MvF-05xe39ZvORdU9JcD6hQ@mail.gmail.com>
Several places weren't careful about fsyncing in the way. See 1d4a0ab1
and 606e0f98 for details about required fsyncs.
This adds a couple of functions in src/common/ that have an equivalent
in the backend: durable_rename(), fsync_parent_path()
From: Michael Paquier <michael.paquier@gmail.com>
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
We had thirty different GIN array opclasses sharing the same operators and
support functions. That still didn't cover all the built-in types, nor
did it cover arrays of extension-added types. What we want is a single
polymorphic opclass for "anyarray". There were two missing features needed
to make this possible:
1. We have to be able to declare the index storage type as ANYELEMENT
when the opclass is declared to index ANYARRAY. This just takes a few
more lines in index_create(). Although this currently seems of use only
for GIN, there's no reason to make index_create() restrict it to that.
2. We have to be able to identify the proper GIN compare function for
the index storage type. This patch proceeds by making the compare function
optional in GIN opclass definitions, and specifying that the default btree
comparison function for the index storage type will be looked up when the
opclass omits it. Again, that seems pretty generically useful.
Since the comparison function lookup is done in initGinState(), making
use of the second feature adds an additional cache lookup to GIN index
access setup. It seems unlikely that that would be very noticeable given
the other costs involved, but maybe at some point we should consider
making GinState data persist longer than it now does --- we could keep it
in the index relcache entry, perhaps.
Rather fortuitously, we don't seem to need to do anything to get this
change to play nice with dump/reload or pg_upgrade scenarios: the new
opclass definition is automatically selected to replace existing index
definitions, and the on-disk data remains compatible. Also, if a user has
created a custom opclass definition for a non-builtin type, this doesn't
break that, since CREATE INDEX will prefer an exact match to opcintype
over a match to ANYARRAY. However, if there's anyone out there with
handwritten DDL that explicitly specifies _bool_ops or one of the other
replaced opclass names, they'll need to adjust that.
Tom Lane, reviewed by Enrique Meneses
Discussion: <14436.1470940379@sss.pgh.pa.us>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
Commits 470d886c3 et al intended to fix the problem that the postmaster
selected the same "random" DSM control segment ID on every start. But
using PostmasterRandom() for that destroys the intended property that the
delay between random_start_time and random_stop_time will be unpredictable.
(Said delay is probably already more predictable than we could wish, but
that doesn't mean that reducing it by a couple orders of magnitude is OK.)
Revert the previous patch and add a comment warning against misuse of
PostmasterRandom. Fix the original problem by calling srandom() early in
PostmasterMain, using a low-security seed that will later be overwritten
by PostmasterRandom.
Discussion: <20789.1474390434@sss.pgh.pa.us>
Past refactorings have removed all but one reference to SizeOfIptrData
(and that one place was in a pretty noncritical spot). Since nobody's
complained, it seems probable that there are no supported compilers
that don't think sizeof(ItemPointerData) is 6. If there are, we're
wasting MAXALIGN per heap tuple anyway, so it's rather silly to worry
about whether we can shave space in places like WAL records.
Pavan Deolasee
Discussion: <CABOikdOOawDda4hwLOT6zdA6MFfPLu3Z2YBZkX0JdayNS6JOeQ@mail.gmail.com>
pg_ctl used to determine whether a server was in standby mode by looking
for a recovery.conf file. With this change, it instead looks into
pg_control, which is potentially more accurate. There are also
occasional discussions about removing recovery.conf, so this removes one
dependency.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The GiST search queue is implemented as a pairing heap rather than as
Red-Black Tree, since 9.5 (commit e7032610). I neglected these comments
in that commit.
This function has no direct callers at present, but it's convenient for
manual use in a debugger, rather than having to inspect memory and do
bit-counting in your head.
In passing, get rid of useless outBitmapset() wrapper around
_outBitmapset(); let's just export the function that does the work.
Likewise for outToken().
Ashutosh Bapat, tweaked a bit by me
Discussion: <CAFjFpRdiht8e1HTVirbubr4YzaON5iZTzFJjq909y4sU8M_6eA@mail.gmail.com>
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
We were misapplying NameGetDatum() to plain C strings in some places.
This worked, because it was just a pointer cast anyway, but it's a type
cheat in some sense. Use CStringGetDatum instead, and modify the
NameGetDatum macro so it won't compile if applied to something that's
not a pointer to NameData. This should result in no changes to
generated code, but it is logically cleaner.
Mark Dilger, tweaked a bit by me
Discussion: <EFD8AC94-4C1F-40C1-A5EA-304080089C1B@gmail.com>
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Peter Geoghegan
Some experimentation with an older version of gcc showed that it is able
to determine whether "if (elevel_ >= ERROR)" is compile-time constant
if elevel_ is declared "const", but otherwise not so much. We had
accounted for that in ereport() but were too miserly with braces to
make it so in elog(). I don't know how many currently-interesting
compilers have the same quirk, but in case it will save some code
space, let's make sure that elog() is on the same footing as ereport()
for this purpose.
Back-patch to 9.3 where we introduced pg_unreachable() calls into
elog/ereport.
The full generality of deleting an arbitrary number of tuples is no longer
needed, so let's save some code and cycles by replacing the original coding
with an implementation based on PageIndexTupleDelete.
We can always get back the old code from git if we need it again for new
callers (though I don't care for its willingness to mess with line pointers
it wasn't told to mess with).
Discussion: <552.1473445163@sss.pgh.pa.us>
Nowadays this is just a backwards-compatibility wrapper around
PageAddItemExtended, so let's avoid the extra level of function call.
In addition, because pretty much all callers are passing constants
for the two bool arguments, compilers will be able to constant-fold
the conversion to a flags bitmask.
Discussion: <552.1473445163@sss.pgh.pa.us>
PageIndexTupleOverwrite performs approximately the same function as
PageIndexTupleDelete (or PageIndexDeleteNoCompact) followed by PageAddItem
targeting the same item pointer offset. But in the case where the new
tuple is the same size as the old, it avoids shuffling other data around on
the page, because the new tuple is placed where the old one was rather than
being appended to the end of the page. This has been shown to provide a
substantial speedup for some GiST use-cases.
Also, this change allows some API simplifications: we can get rid of
the rather klugy and error-prone PAI_ALLOW_FAR_OFFSET flag for
PageAddItemExtended, since that was used only to cover a corner case
for BRIN that's better expressed by using PageIndexTupleOverwrite.
Note that this patch causes a rather subtle WAL incompatibility: the
physical page content change represented by certain WAL records is now
different than it was before, because while the tuples have the same
itempointer line numbers, the tuples themselves are in different places.
I have not bumped the WAL version number because I think it doesn't matter
unless you are trying to do bitwise comparisons of original and replayed
pages, and in any case we're early in a devel cycle and there will probably
be more WAL changes before v10 gets out the door.
There is probably room to make use of PageIndexTupleOverwrite in SP-GiST
and GIN too, but that is left for a future patch.
Andrey Borodin, reviewed by Anastasia Lubennikova, whacked around a bit
by me
Discussion: <CAJEAwVGQjGGOj6mMSgMwGvtFd5Kwe6VFAxY=uEPZWMDjzbn4VQ@mail.gmail.com>
So far md.c used a linked list of segments. That proved to be a problem
when processing large relations, because every smgr.c/md.c level access
to a page incurred walking through a linked list of all preceding
segments. Thus making accessing pages O(#segments).
Replace the linked list of segments hanging off SMgrRelationData with an
array of opened segments. That allows O(1) access to individual
segments, if they've previously been opened.
Discussion: <20140331101001.GE13135@alap3.anarazel.de>
Reviewed-By: Peter Geoghegan, Tom Lane (in an older version)
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
When building libpq, ip.c and md5.c were symlinked or copied from
src/backend/libpq into src/interfaces/libpq, but now that we have a
directory specifically for routines that are shared between the server and
client binaries, src/common/, move them there.
Some routines in ip.c were only used in the backend. Keep those in
src/backend/libpq, but rename to ifaddr.c to avoid confusion with the file
that's now in common.
Fix the comment in src/common/Makefile to reflect how libpq actually links
those files.
There are two more files that libpq symlinks directly from src/backend:
encnames.c and wchar.c. I don't feel compelled to move those right now,
though.
Patch by Michael Paquier, with some changes by me.
Discussion: <69938195-9c76-8523-0af8-eb718ea5b36e@iki.fi>
While we don't need multiple iterators at the moment, the interface is
nicer and less dangerous this way.
Aleksander Alekseev, with some changes by me.
A majority of callers seem to have believed that this was the API spec
already, because they omitted any check for a NULL result, and hence
would crash on an out-of-shared-memory failure. The original proposal
was to just add such error checks everywhere, but that does nothing to
prevent similar omissions in future. Instead, let's make ShmemAlloc()
throw the error (so we can remove the caller-side checks that do exist),
and introduce a new function ShmemAllocNoError() that has the previous
behavior of returning NULL, for the small number of callers that need
that and are prepared to do the right thing. This also lets us remove
the rather wishy-washy behavior of printing a WARNING for out-of-shmem,
which never made much sense: either the caller has a strategy for
dealing with that, or it doesn't. It's not ShmemAlloc's business to
decide whether a warning is appropriate.
The v10 release notes will need to call this out as a significant
source-code change. It's likely that it will be a bug fix for
extension callers too, but if not, they'll need to change to using
ShmemAllocNoError().
This is nominally a bug fix, but the odds that it's fixing any live
bug are actually rather small, because in general the requests
being made by the unchecked callers were already accounted for in
determining the overall shmem size, so really they ought not fail.
Between that and the possible impact on extensions, no back-patch.
Discussion: <24843.1472563085@sss.pgh.pa.us>
Since we removed SSL renegotiation, there's no longer any reason to
keep track of the amount of data transferred over the link.
Daniel Gustafsson
Discussion: <FEA7F89C-ECDF-4799-B789-2F8DDCBA467F@yesql.se>
Now that we are OK with using static inline functions, we can use them
to avoid function call overhead of pass-by-val versions of Float4GetDatum,
DatumGetFloat8, and Float8GetDatum. Those functions are only a few CPU
instructions long, but they could not be written into macros previously,
because we need a local union variable for the conversion.
I kept the pass-by-ref versions as regular functions. They are very simple
too, but they call palloc() anyway, so shaving a few instructions from the
function call doesn't seem so important there.
Discussion: <dbb82a4a-2c15-ba27-dd0a-009d2aa72b77@iki.fi>
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
This has been requested a few times, but the use-case for it was never
entirely clear. The reason for adding it now is that transmission of
error reports from parallel workers fails when NLS is active, because
pq_parse_errornotice() wrongly assumes that the existing severity field
is nonlocalized. There are other ways we could have fixed that, but the
other options were basically kluges, whereas this way provides something
that's at least arguably a useful feature along with the bug fix.
Per report from Jakob Egger. Back-patch into 9.6, because otherwise
parallel query is essentially unusable in non-English locales. The
problem exists in 9.5 as well, but we don't want to risk changing
on-the-wire behavior in 9.5 (even though the possibility of new error
fields is specifically called out in the protocol document). It may
be sufficient to leave the issue unfixed in 9.5, given the very limited
usefulness of pq_parse_errornotice in that version.
Discussion: <A88E0006-13CB-49C6-95CC-1A77D717213C@eggerapps.at>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
If you have previously pinned a segment and decide that you don't
actually want to keep it around until shutdown, this new API lets you
remove the pin. This is pretty trivial except on Windows, where it
requires closing the duplicate handle that was used to implement the
pin.
Thomas Munro and Amit Kapila, reviewed by Amit Kapila and by me.
Previously, the spgSplitTuple action could only create a new upper tuple
containing a single labeled node. This made it useless for opclasses
that prefer to work with fixed sets of nodes (labeled or otherwise),
which meant that restrictive prefixes could not be used with such
node definitions. Change the output field set for the choose() method
to allow it to specify any valid node set for the new upper tuple,
and to specify which of these nodes to place the modified lower tuple in.
In addition to its primary use for fixed node sets, this feature could
allow existing opclasses that use variable node sets to skip a separate
spgAddNode action when splitting a tuple, by setting up the node needed
for the incoming value as part of the spgSplitTuple action. However, care
would have to be taken to add the extra node only when it would not make
the tuple bigger than before. (spgAddNode can enlarge the tuple,
spgSplitTuple can't.)
This is a prerequisite for an upcoming SP-GiST inet opclass, but is
being committed separately to increase the visibility of the API change.
In passing, improve the documentation about the traverse-values feature
that was added by commit ccd6eb49a.
Emre Hasegeli, with cosmetic adjustments and documentation rework by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Emre Hasegeli
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
We need to scan the whole parse tree for parallel-unsafe functions.
If there are none, we'll later need to determine whether particular
subtrees contain any parallel-restricted functions. The previous coding
retained no knowledge from the first scan, even though this is very
wasteful in the common case where the query contains only parallel-safe
functions. We can bypass all of the later scans by remembering that fact.
This provides a small but measurable speed improvement when the case
applies, and shouldn't cost anything when it doesn't.
Patch by me, reviewed by Robert Haas
Discussion: <3740.1471538387@sss.pgh.pa.us>
pcolor was used to represent function arguments that are nominally of
type color, but when using a pre-ANSI C compiler would be passed as the
promoted integer type. We really don't need that anymore.
The regex library used to have a notion of a "collating element" that was
distinct from a "character", but Henry Spencer never actually implemented
his planned support for multi-character collating elements, and the Tcl
crew ripped out most of the stubs for that years ago. The only thing left
that distinguished the "celt" typedef from the "chr" typedef was that
"celt" was supposed to also be able to hold the not-a-character "NOCELT"
value. However, NOCELT was not used anywhere after the MCCE stub removal
changes, which means there's no need for celt to be different from chr.
Removing the separate typedef simplifies matters and also removes a trap
for the unwary, in that celt is signed while chr may not be, so comparisons
could mean different things. There's no bug there today because we
restrict CHR_MAX to be less than INT_MAX, but I think there may have been
such bugs before we did that, and there could be again if anyone ever
decides to fool with the range of chr.
This patch also removes assorted unnecessary casts to "chr" of values
that are already chrs. Many of these seem to be leftover from days when
the code was compatible with pre-ANSI C.
These types are storage-compatible with real arrays, but they don't support
toasting, so of course they can't support expansion either.
Per bug #14289 from Michael Overmeyer. Back-patch to 9.5 where expanded
arrays were introduced.
Report: <20160818174414.1529.37913@wrigleys.postgresql.org>
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
This is somewhat cosmetic, since as long as you know what you are looking
at, "10.0" is a serviceable substitute for "10". But there is a potential
for confusion between version numbers with minor numbers and those without
--- we don't want people asking "why is psql saying 10.0 when my server is
10.2". Therefore, back-patch as far as practical, which turns out to be
9.3. I could have redone the patch to use fprintf(stderr) in place of
psql_error(), but it seems more work than is warranted for branches that
will be EOL or nearly so by the time v10 comes out.
Although only psql seems to contain any code that needs this, I chose
to put the support function into fe_utils, since it seems likely we'll
need it in other client programs in future. (In 9.3-9.5, use dumputils.c,
the predecessor of fe_utils/string_utils.c.)
In HEAD, also fix the backend code that whines about loadable-library
version mismatch. I don't see much need to back-patch that.
Prior to commit 7882c3b0b9, it was
possible to use LWLocks within DSM segments, but that commit broke
this use case by switching from a doubly linked list to a circular
linked list. Switch back, using a new bit of general infrastructure
for maintaining lists of PGPROCs.
Thomas Munro, reviewed by me.
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Peter Eisentraut and Tom Lane
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
Discussion of commit 3e2f3c2e4 exposed a problem that is of longer
standing: since we don't detoast data while sticking it into a portal's
holdStore for PORTAL_ONE_RETURNING and PORTAL_UTIL_SELECT queries, and we
release the query's snapshot as soon as we're done loading the holdStore,
later readout of the holdStore can do TOAST fetches against data that can
no longer be seen by any of the session's live snapshots. This means that
a concurrent VACUUM could remove the TOAST data before we can fetch it.
Commit 3e2f3c2e4 exposed the problem by showing that sometimes we had *no*
live snapshots while fetching TOAST data, but we'd be at risk anyway.
I believe this code was all right when written, because our management of a
session's exposed xmin was such that the TOAST references were safe until
end of transaction. But that's no longer true now that we can advance or
clear our PGXACT.xmin intra-transaction.
To fix, copy the query's snapshot during FillPortalStore() and save it in
the Portal; release it only when the portal is dropped. This essentially
implements a policy that we must hold a relevant snapshot whenever we
access potentially-toasted data. We had already come to that conclusion
in other places, cf commits 08e261cbc9 and ec543db77b.
I'd have liked to add a regression test case for this, but I didn't see
a way to make one that's not unreasonably bloated; it seems to require
returning a toasted value to the client, and those will be big.
In passing, improve PortalRunUtility() so that it positively verifies
that its ending PopActiveSnapshot() call will pop the expected snapshot,
removing a rather shaky assumption about which utility commands might
do their own PopActiveSnapshot(). There's no known bug here, but now
that we're actively referencing the snapshot it's almost free to make
this code a bit more bulletproof.
We might want to consider back-patching something like this into older
branches, but it would be prudent to let it prove itself more in HEAD
beforehand.
Discussion: <87vazemeda.fsf@credativ.de>
tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.
Previously, we tested for MVCC snapshots to see whether they were too
old, but not TOAST snapshots, which can lead to complaints about missing
TOAST chunks if those chunks are subject to early pruning. Ideally,
the threshold lsn and timestamp for a TOAST snapshot would be that of
the corresponding MVCC snapshot, but since we have no way of deciding
which MVCC snapshot was used to fetch the TOAST pointer, use the oldest
active or registered snapshot instead.
Reported by Andres Freund, who also sketched out what the fix should
look like. Patch by me, reviewed by Amit Kapila.
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
The document specifies that pg_replication_origin_xact_reset function
doesn't have any argument variables. But previously it was actually
defined so as to have two argument variables, though they were not
used at all. That is, the pg_proc entry for that function was incorrect.
This patch fixes the pg_proc entry and removes those two arguments
from the function definition.
No back-patch because this change needs a catalog version bump
although the issue exists in 9.5 as well. Instead, a note about those
unused argument variables will be added to 9.5 document later.
Catalog version bumped due to the change of pg_proc.
TupleQueueReaderNext() leaks like a sieve if it has to do any tuple
disassembly/reconstruction. While we could try to clean up its allocations
piecemeal, it seems like a better idea just to insist that it should be run
in a short-lived memory context, so that any transient space goes away
automatically. I chose to have nodeGather.c switch into its existing
per-tuple context before the call, rather than inventing a separate
context inside tqueue.c.
This is sufficient to stop all leakage in the simple case I exhibited
earlier today (see link below), but it does not deal with leaks induced
in more complex cases by tqueue.c's insistence on using TopMemoryContext
for data that it's not actually trying hard to keep track of. That issue
is intertwined with another major source of inefficiency, namely failure
to cache lookup results across calls, so it seems best to deal with it
separately.
In passing, improve some comments, and modify gather_readnext's method for
deciding when it's visited all the readers so that it's more obviously
correct. (I'm not actually convinced that the previous code *is*
correct in the case of a reader deletion; it certainly seems fragile.)
Discussion: <32763.1469821037@sss.pgh.pa.us>
An evident copy-and-pasteo in commit 2bd9e412f broke the non-blocking
aspect of pq_putmessage_noblock(), causing it to behave identically to
pq_putmessage(). That function is nowadays used only in walsender.c,
so that the net effect was to cause walsenders to hang up waiting for
the receiver in situations where they should not.
Kyotaro Horiguchi
Patch: <20160728.185228.58375982.horiguchi.kyotaro@lab.ntt.co.jp>
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
These functions were added in commits fbe5a3fb7 and a104a017f,
but commit 45639a052 removed their only callers. Put the related
code in foreign.c back to the way it was in 9.5, to avoid pointless
cross-version diffs.
Etsuro Fujita
Patch: <d674a3f1-6b63-519c-ef3f-f3188ed6a178@lab.ntt.co.jp>
Since a892234 & fd31cd265 the visibilitymap's freeze bit is used to
avoid vacuuming the whole relation in anti-wraparound vacuums. Doing so
correctly relies on not adding xids to the heap without also unsetting
the visibilitymap flag. Tuple locking related code has not done so.
To allow selectively resetting all-frozen - to avoid pessimizing
heap_lock_tuple - allow to selectively reset the all-frozen with
visibilitymap_clear(). To avoid having to use
visibilitymap_get_status (e.g. via VM_ALL_FROZEN) inside a critical
section, have visibilitymap_clear() return whether any bits have been
reset.
There's a remaining issue (denoted by XXX): After the PageIsAllVisible()
check in heap_lock_tuple() and heap_lock_updated_tuple_rec() the page
status could theoretically change. Practically that currently seems
impossible, because updaters will hold a page level pin already. Due to
the next beta coming up, it seems better to get the required WAL magic
bump done before resolving this issue.
The added flags field fields to xl_heap_lock and xl_heap_lock_updated
require bumping the WAL magic. Since there's already been a catversion
bump since the last beta, that's not an issue.
Reviewed-By: Robert Haas, Amit Kapila and Andres Freund
Author: Masahiko Sawada, heavily revised by Andres Freund
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
This should have been done in commit 73c986adde which added several
new fields to pg_control, and again in commit 5028f22f6e which
changed the CRC algorithm, but it wasn't. It's far too late to fix it in
the 9.5 branch, but let's do so in 9.6, so that if a 9.6 postmaster is
started against a 9.4-era pg_control it will complain about a versioning
problem rather than a CRC failure. We already forced initdb/pg_upgrade
for beta3, so there's no downside to doing this now.
Discussion: <7615.1468598094@sss.pgh.pa.us>
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
We have, for a very long time, allowed the same subplan (same member of the
PlannedStmt.subplans list) to be referenced by more than one SubPlan node;
this avoids problems for cases such as subplans within an IndexScan's
indxqual and indxqualorig fields. However, EXPLAIN had not gotten the memo
and would print each reference as though it were an independent identical
subplan. To fix, track plan_ids of subplans we've printed and don't print
the same plan_id twice. Per report from Pavel Stehule.
BTW: the particular case of IndexScan didn't cause visible duplication
in a plain EXPLAIN, only EXPLAIN ANALYZE, because in the former case we
short-circuit executor startup before the indxqual field is processed by
ExecInitExpr. That seems like it could easily lead to other EXPLAIN
problems in future, but it's not clear how to avoid it without breaking
the "EXPLAIN a plan using hypothetical indexes" use-case. For now I've
left that issue alone.
Although this is a longstanding bug, it's purely cosmetic (no great harm
is done by the repeat printout) and we haven't had field complaints before.
So I'm hesitant to back-patch it, especially since there is some small risk
of ABI problems due to the need to add a new field to ExplainState.
In passing, rearrange order of fields in ExplainState to be less random,
and update some obsolete comments about when/where to initialize them.
Report: <CAFj8pRAimq+NK-menjt+3J4-LFoodDD8Or6=Lc_stcFD+eD4DA@mail.gmail.com>
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
In the previous design, the GetForeignUpperPaths FDW callback hook was
called before we got around to labeling upper relations with the proper
consider_parallel flag; this meant that any upper paths created by an FDW
would be marked not-parallel-safe. While that's probably just as well
right now, we aren't going to want it to be true forever. Hence, abandon
the idea that FDWs should be allowed to inject upper paths before the core
code has gotten around to creating the relevant upper relation. (Well,
actually they still can, but it's on their own heads how well it works.)
Instead, adopt the same API already designed for create_upper_paths_hook:
we call GetForeignUpperPaths after each upperrel has been created and
populated with the paths the core planner knows how to make.
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
In non-text output formats, parallelized aggregates were reporting
"Partial" or "Finalize" as a field named "Operation", which might be all
right in the absence of any context --- but other plan node types use that
field to report SQL-visible semantics, such as Select/Insert/Update/Delete.
So that naming choice didn't seem good to me. I changed it to "Partial
Mode".
Also, the field did not appear at all for a non-parallelized Agg plan node,
which is contrary to expectation in non-text formats. We're notionally
producing objects that conform to a schema, so the set of fields for a
given node type and EXPLAIN mode should be well-defined. I set it up to
fill in "Simple" in such cases.
Other fields that were added for parallel query, namely "Parallel Aware"
and Gather's "Single Copy", had not gotten the word on that point either.
Make them appear always in non-text output.
Also, the latter two fields were nominally producing boolean output, but
were getting it wrong, because bool values shouldn't be quoted in JSON or
YAML. Somehow we'd not needed an ExplainPropertyBool formatting subroutine
before 9.6; but now we do, so invent it.
Discussion: <16002.1466972724@sss.pgh.pa.us>
Commit b1a9bad9e7 introduced a stats view to provide insight into the
running WAL receiver, but neglected to include the connection string in
it, as reported by Michaël Paquier. This commit fixes that omission.
(Any security-sensitive information is not disclosed).
While at it, close the mild security hole that we were exposing the
password in the connection string in shared memory. This isn't
user-accessible, but it still looks like a good idea to avoid having the
cleartext password in memory.
Author: Michaël Paquier, Álvaro Herrera
Review by: Vik Fearing
Discussion: https://www.postgresql.org/message-id/CAB7nPqStg4M561obo7ryZ5G+fUydG4v1Ajs1xZT1ujtu+woRag@mail.gmail.com
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
It's rather silly to make a separate pass over the tlist + HAVING qual,
and a separate set of visits to the syscache, when get_agg_clause_costs
already has all the required information in hand. This nets out as less
code as well as fewer cycles.
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
Commit e06a38965's original coding for constructing the execution-time
expression tree for a combining aggregate was rather messy, involving
duplicating quite a lot of code in setrefs.c so that it could inject
a nonstandard matching rule for Aggrefs. Get rid of that in favor of
explicitly constructing a combining Aggref with a partial Aggref as input,
then allowing setref's normal matching logic to match the partial Aggref
to the output of the lower plan node and hence replace it with a Var.
In passing, rename and redocument make_partialgroup_input_target to have
some connection to what it actually does.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca9151, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
Peter Eisentraut
Tom Lane
Robert Haas
Andres Freund
Alvaro Herrera
Magnus Hagander
Bruce Momjian
Heikki Linnakangas
Fujii Masao
Stephen Frost
Kevin Grittner
Simon Riggs
Noah Misch
Teodor Sigaev