As benchmarks show, using libc's string-to-integer conversion is
pretty slow. At least part of the reason for that is that strtol[l]
have to be more generic than what largely is required inside pg.
This patch considerably speeds up int2/int4 input (int8 already was
already using hand-rolled code).
Most of the existing pg_atoi callers have been converted. But as one
requires pg_atoi's custom delimiter functionality, and as it seems
likely that there's external pg_atoi users, it seems sensible to just
keep pg_atoi around.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171208214437.qgn6zdltyq5hmjpk@alap3.anarazel.de
The code added by 9c7d06d606 was a bit obscure; clarify that by
rewriting the comments. Lack of clarity has already caused bugs, so
it's a worthy goal.
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/87y3fgoyrn.fsf@ars-thinkpad
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
This should tame the beast, as there are no other places where off_t is
used in the new error messages.
Reported again by longfin, which complained about walsender.c while I
spotted the other two ones while double-checking.
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Since the old logic was completely unaware of subtransactions, a
change made in a subsequently-aborted subtransaction would still cause
workers to be stopped at toplevel transaction commit. Fix that by
managing a stack of worker lists rather than just one.
Amit Khandekar and Robert Haas
Discussion: http://postgr.es/m/CAJ3gD9eaG_mWqiOTA2LfAug-VRNn1hrhf50Xi1YroxL37QkZNg@mail.gmail.com
All attributes and arguments using a slot name map to the data type
"name", but this function has been using "text". This is cosmetic, as
even if text is used then the slot name would be truncated to 64
characters anyway and stored as such. The documentation already said
so and the function already assumed that the argument was of this type
when fetching its value.
Bump catalog version.
Author: Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoADYz_-eAqH5AVFaCaojcRgwpo9PW=u8kgTMys63oB8Cw@mail.gmail.com
WAL senders sending logically-decoded data fail to properly report in
"streaming" state when starting up, hence as long as one extra record is
not replayed, such WAL senders would remain in a "catchup" state, which
is inconsistent with the physical cousin.
This can be easily reproduced by for example using pg_recvlogical and
restarting the upstream server. The TAP tests have been slightly
modified to detect the failure and strengthened so as future tests also
make sure that a node is in streaming state when waiting for its
catchup.
Backpatch down to 9.4 where this code has been introduced.
Reported-by: Sawada Masahiko
Author: Simon Riggs, Sawada Masahiko
Reviewed-by: Petr Jelinek, Michael Paquier, Vaishnavi Prabakaran
Discussion: https://postgr.es/m/CAD21AoB2ZbCCqOx=bgKMcLrAvs1V0ZMqzs7wBTuDySezTGtMZA@mail.gmail.com
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
Starting with commit 9915de6c1c, replication slot drop uses a
condition variable sleep to wait until the current user of the slot goes
away. This is more user friendly than the previous behavior of erroring
out if the slot is in use, but it fails with a not-for-user-consumption
error message in single-user mode; plus, if you're using single-user
mode because you don't want to start the server in the regular mode
(say, disk is full and WAL won't recycle because of the slot), it's
inconvenient.
Fix by skipping the cond variable sleep in single-user mode, since
there can't be anybody to wait for anyway.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3b2f809f-326c-38dd-7a9e-897f957a4eb1@enterprisedb.com
Coverity complains that there is no protection in the code (at least in
non-assertion-enabled builds) against speculative insertion failing to
follow the expected protocol. Add an elog(ERROR) for the case.
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Calling an external function while a pin-lock is held is a bad idea as
those are designed to be short-lived. The stress of a first commit into
a large git history may contribute to that.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20180611164952.vmxdpdpirdtkdsz6@alap3.anarazel.de
A review of the code has showed up a couple of issues fixed by this
commit:
- Physical slots have been using the confirmed LSN position as a start
comparison point which is always 0/0, instead use the restart LSN
position (logical slots need to use the confirmed LSN position, which
was correct).
- The actual slot update was incorrect for both physical and logical
slots. Physical slots need to use their restart_lsn as base comparison
point (confirmed_flush was used because of previous point), and logical
slots need to begin reading WAL from restart_lsn (confirmed_flush was
used as well), while confirmed_flush is compiled depending on the
decoding context and record read, and is the LSN position returned back
to the caller.
- Never return 0/0 if a slot cannot be advanced. This way, if a slot is
advanced while the activity is idle, then the same position is returned
to the caller over and over without raising an error. Instead return
the LSN the slot has been advanced to. With repetitive calls, the same
position is returned hence caller can directly monitor the difference in
progress in bytes by doing simply LSN difference calculations, which
should be monotonic.
Note that as the slot is owned by the backend advancing it, then the
read of those fields is fine lock-less, while updates need to happen
while the slot mutex is held, so fix that on the way as well. Other
locks for in-memory data of replication slots have been already fixed
previously.
Some of those issues have been pointed out by Petr and Simon during the
patch, while I noticed some of them after looking at the code. This
also visibly takes of a recently-discovered bug causing assertion
failures which can be triggered by a two-step slot forwarding which
first advanced the slot to a WAL page boundary and secondly advanced it
to the latest position, say 'FF/FFFFFFF' to make sure that the newest
LSN is used as forward point. It would have been nice to drop a test
for that, but the set of operators working on pg_lsn limits it, so this
is left for a future exercise.
Author: Michael Paquier
Reviewed-by: Petr Jelinek, Simon Riggs
Discussion: https://postgr.es/m/CANP8+jLyS=X-CAk59BJnsxKQfjwrmKicHQykyn52Qj-Q=9GLCw@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/2840048a-1184-417a-9da8-3299d207a1d7%40postgrespro.ru
While debugging issues on HEAD for the new slot forwarding feature of
Postgres 11, some monitoring of the code surrounding in-memory slot data
has proved that the lock handling may cause inconsistent data to be read
by read-only callers of slot functions, particularly
pg_get_replication_slots() which fetches data for the system view
pg_replication_slots, or modules looking directly at slot information.
The code paths involved in those problems concern logical decoding
initialization (down to 9.4) and WAL reservation for slots (new as of
10).
A set of comments documenting all the lock handlings, particularly the
dependency with LW locks for slots and the in_use flag as well as the
internal mutex lock is added, based on a suggested by Simon Riggs.
Some of the fixed code exists down to 9.4 where WAL decoding has been
introduced, but as those race conditions are really unlikely going to
happen as those concern code paths for slot and decoding creation, just
fix the problem on HEAD.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180528085747.GA27845@paquier.xyz
When due to publication configuration, a TRUNCATE change ends up with
zero tables to be published, don't send the message out, just skip it.
It's not wrong, but obviously useless overhead.
Teach both base backups and pg_verify_checksums that if a page is new,
it does not have a checksum yet, so it shouldn't be verified.
Noted by Tomas Vondra, review by David Steele.
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We don't actually need the insert-or-update logic, so it's clearer to
have separate functions for the inserting and updating.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
In case the subscription is removed before the worker is fully started,
give a specific error message instead of the generic "cache lookup"
error.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
Previously there was no way in the standby side to find out the host and port
of the sender server that the walreceiver was currently connected to when
multiple hosts and ports were specified in primary_conninfo. For that purpose,
this patch adds sender_host and sender_port columns into pg_stat_wal_receiver
view. They report the host and port that the active replication connection
currently uses.
Bump catalog version.
Author: Haribabu Kommi
Reviewed-by: Michael Paquier and me
Discussion: https://postgr.es/m/CAJrrPGcV_aq8=cdqkFhVDJKEnDQ70yRTTdY9RODzMnXNrCz2Ow@mail.gmail.com
The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me
Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
Commit 8694cc96b did this randomly differently from other callers of
parse_filename_for_nontemp_relation(). Perhaps unsurprisingly,
the randomly different way is wrong; it fails to ensure the
extracted string is null-terminated. Per buildfarm member skink.
Discussion: https://postgr.es/m/14453.1522001792@sss.pgh.pa.us
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
Andres Freund
Alvaro Herrera
Tom Lane
Heikki Linnakangas
Michael Paquier
Robert Haas
Andrew Dunstan
Peter Eisentraut
Magnus Hagander
Stephen Frost
Fujii Masao
Bruce Momjian
Teodor Sigaev