We have a dozen or so places that need to iterate over all but the
first cell of a List. Prior to v13 this was typically written as
for_each_cell(lc, lnext(list_head(list)))
Commit 1cff1b95a changed these to
for_each_cell(lc, list, list_second_cell(list))
This patch introduces a new macro for_each_from() which expresses
the start point as a list index, allowing these to be written as
for_each_from(lc, list, 1)
This is marginally more efficient, since ForEachState.i can be
initialized directly instead of backing into it from a ListCell
address. It also seems clearer and less typo-prone.
Some of the remaining uses of for_each_cell() look like they could
profitably be changed to for_each_from(), but here I confined myself
to changing uses of list_second_cell().
Also, fix for_each_cell_setup() and for_both_cell_setup() to
const-ify their arguments; that's a simple oversight in 1cff1b95a.
Back-patch into v13, on the grounds that (1) the const-ification
is a minor bug fix, and (2) it's better for back-patching purposes
if we only have two ways to write these loops rather than three.
In HEAD, also remove list_third_cell() and list_fourth_cell(),
which were also introduced in 1cff1b95a, and are unused as of
cc99baa43. It seems unlikely that any third-party code would
have started to use them already; anyone who has can be directed
to list_nth_cell instead.
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
Prior to this commit, the linitial(), lsecond(), lthird(), lfourth()
macros and their int and Oid list cousins would call their corresponding
inlined function to fetch the cell of interest. Those inline functions
were kind enough to return NULL if the particular cell did not exist.
Unfortunately, the care that these functions took was of no relevance to
the calling macros as they proceeded to directly dereference the returned
value without any regard to whether that value was NULL or not. If it had
been, we'd have segfaulted.
Of course, the fact that we would have segfaulted on misuse of these
macros just goes to prove that nobody is relying on the empty or list too
small checks. So here we just get rid of those checks completely.
The existing inline functions have been left alone as someone may be using
those directly. We just replace the call within each macro to use
list_nth_cell().
For the llast*() case we require a new list_last_cell() inline function to
get away from the multiple evaluation hazard that we'd get if we fetched
->length on the macro's parameter.
Author: David Rowley
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com
When commit bd3daddaf introduced AlternativeSubPlans, I had some
ambitions towards allowing the choice of subplan to change during
execution. That has not happened, or even been thought about, in the
ensuing twelve years; so it seems like a failed experiment. So let's
rip that out and resolve the choice of subplan at the end of planning
(in setrefs.c) rather than during executor startup. This has a number
of positive benefits:
* Removal of a few hundred lines of executor code, since
AlternativeSubPlans need no longer be supported there.
* Removal of executor-startup overhead (particularly, initialization
of subplans that won't be used).
* Removal of incidental costs of having a larger plan tree, such as
tree-scanning and copying costs in the plancache; not to mention
setrefs.c's own costs of processing the discarded subplans.
* EXPLAIN no longer has to print a weird (and undocumented)
representation of an AlternativeSubPlan choice; it sees only the
subplan actually used. This should mean less confusion for users.
* Since setrefs.c knows which subexpression of a plan node it's
working on at any instant, it's possible to adjust the estimated
number of executions of the subplan based on that. For example,
we should usually estimate more executions of a qual expression
than a targetlist expression. The implementation used here is
pretty simplistic, because we don't want to expend a lot of cycles
on the issue; but it's better than ignoring the point entirely,
as the executor had to.
That last point might possibly result in shifting the choice
between hashed and non-hashed EXISTS subplans in a few cases,
but in general this patch isn't meant to change planner choices.
Since we're doing the resolution so late, it's really impossible
to change any plan choices outside the AlternativeSubPlan itself.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/1992952.1592785225@sss.pgh.pa.us
In the particular case of GRANTED BY, this is specified in the SQL
standard. Since in PostgreSQL, CURRENT_ROLE is equivalent to
CURRENT_USER, and CURRENT_USER is already supported here, adding
CURRENT_ROLE is trivial. The other cases are PostgreSQL extensions,
but for the same reason it also makes sense there.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Asif Rehman <asifr.rehman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/f2feac44-b4c5-f38f-3699-2851d6a76dc9%402ndquadrant.com
Since there is only one place that actually needs the partition check
expression, namely ExecPartitionCheck, it's better to fetch it from
the relcache there. In this way we will never fetch it at all if
the query never has use for it, and we still fetch it just once when
we do need it.
The reason for taking an interest in this is that if the relcache
doesn't already have the check expression cached, fetching it
requires obtaining AccessShareLock on the partition root. That
means that operations that look like they should only touch the
partition itself will also take a lock on the root. In particular
we observed that TRUNCATE on a partition may take a lock on the
partition's root, contributing to a deadlock situation in parallel
pg_restore.
As written, this patch does have a small cost, which is that we
are microscopically reducing efficiency for the case where a partition
has an empty check expression. ExecPartitionCheck will be called,
and will go through the motions of setting up and checking an empty
qual, where before it would not have been called at all. We could
avoid that by adding a separate boolean flag to track whether there
is a partition expression to test. However, this case only arises
for a default partition with no siblings, which surely is not an
interesting case in practice. Hence adding complexity for it
does not seem like a good trade-off.
Amit Langote, per a suggestion by me
Discussion: https://postgr.es/m/VI1PR03MB31670CA1BD9625C3A8C5DD05EB230@VI1PR03MB3167.eurprd03.prod.outlook.com
This node already handles multiple options using a bitmask, so having a
separate boolean flag is not necessary. This simplifies the code a bit
with less arguments to give to the reindex routines, by replacing the
boolean with an equivalent bitmask value.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20200902110326.GA14963@paquier.xyz
When multiple relations are reindexed, a scan of pg_class is done first
to build the list of relations to work on. However the REINDEX logic
has never checked if a relation listed still exists when beginning the
work on it, causing for example sudden cache lookup failures.
This commit adds safeguards against dropped relations for REINDEX,
similarly to VACUUM or CLUSTER where we try to open the relation,
ignoring it if it is missing. A new option is added to the REINDEX
routines to control if a missed relation is OK to ignore or not.
An isolation test, based on REINDEX SCHEMA, is added for the concurrent
and non-concurrent cases.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200813043805.GE11663@paquier.xyz
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
"relkind" normally refers to the char field from pg_class. However, in
the parse nodes AlterTableStmt and CreateTableAsStmt, "relkind" was used
for a field of type enum ObjectType, that could refer to other object
types than those possible for a relkind. Such fields being usually
named "objtype", switch the name in both structures to make things more
consistent. Note that this led to some confusion in functions that
also operate on a RangeTableEntry object, which also has a field named
"relkind".
This naming goes back to commit 09d4e96, where only OBJECT_TABLE and
OBJECT_INDEX were used. This got extended later to use as well
OBJECT_TYPE with e440e12, not really a relation kind.
Author: Mark Dilger
Reviewed-by: Daniel Gustafsson, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/609181AE-E399-47C7-9221-856E0F96BF93@enterprisedb.com
Since 1f39bce02, HashAgg nodes have had the ability to spill to disk when
memory consumption exceeds work_mem. That commit added new properties to
EXPLAIN ANALYZE to show the maximum memory usage and disk usage, however,
it didn't quite go as far as showing that information for parallel
workers. Since workers may have experienced something very different from
the main process, we should show this information per worker, as is done
in Sort.
Reviewed-by: Justin Pryzby
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/CAApHDvpEKbfZa18mM1TD7qV6PG+w97pwCWq5tVD0dX7e11gRJw@mail.gmail.com
Backpatch-through: 13, where the hashagg spilling code was added.
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Commit f2fcad27d5 (9.6 era) added the ability to mark objects as
dependent an extension, but forgot to add a way for such dependencies to
be removed. This commit fixes that oversight.
Strictly speaking this should be backpatched to 9.6, but due to lack of
demand we're not doing so at this time.
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Reviewed-by: ahsan hadi <ahsan.hadi@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Before discarding the old hash table in ExecReScanHashJoin, capture
its statistics, ensuring that we report the maximum hashtable size
across repeated rescans of the hash input relation. We can repurpose
the existing code for reporting hashtable size in parallel workers
to help with this, making the patch pretty small. This also ensures
that if rescans happen within parallel workers, we get the correct
maximums across all instances.
Konstantin Knizhnik and Tom Lane, per diagnosis by Thomas Munro
of a trouble report from Alvaro Herrera.
Discussion: https://postgr.es/m/20200323165059.GA24950@alvherre.pgsql
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
This case didn't work because columns merged by FULL JOIN USING are
represented in the parse tree by COALESCE expressions, and the logic
for recognizing a partitionable join failed to match upper-level join
clauses to such expressions. To fix, synthesize suitable COALESCE
expressions and add them to the nullable_partexprs lists. This is
pretty ugly and brute-force, but it gets the job done. (I have
ambitions of rethinking the way outer-join output Vars are
represented, so maybe that will provide a cleaner solution someday.
For now, do this.)
Amit Langote, reviewed by Justin Pryzby, Richard Guo, and myself
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Move have_partkey_equi_join and match_expr_to_partition_keys to
relnode.c, since they're used only there. Refactor
build_joinrel_partition_info to split out the code that fills the
joinrel's partition key lists; this doesn't have any non-cosmetic
impact, but it seems like a useful separation of concerns.
Improve assorted nearby comments.
Amit Langote, with a little further editorialization by me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
An AllocSet doubles the size of allocated blocks (up to maxBlockSize),
which means that the current block can represent half of the total
allocated space for the memory context. But the free space in the
current block may never have been touched, so don't count the
untouched memory as allocated for the purposes of
MemoryContextMemAllocated().
Discussion: https://postgr.es/m/ec63d70b668818255486a83ffadc3aec492c1f57.camel@j-davis.com
Specifically, this patch allows ALTER TYPE to:
* Change the default TOAST strategy for a toastable base type;
* Promote a non-toastable type to toastable;
* Add/remove binary I/O functions for a type;
* Add/remove typmod I/O functions for a type;
* Add/remove a custom ANALYZE statistics functions for a type.
The first of these can be done by the type's owner; all the others
require superuser privilege since misuse could cause problems.
The main motivation for this patch is to allow extensions to
upgrade the feature sets of their data types, so the set of
alterable properties is biased towards that use-case. However
it's also true that changing some other properties would be
a lot harder, as they get baked into physical storage and/or
stored expressions that depend on the type.
Along the way, refactor GenerateTypeDependencies() to make it easier
to call, refactor DefineType's volatility checks so they can be shared
by AlterType, and teach typcache.c that it might have to reload data
from the type's pg_type row, a scenario it never handled before.
Also rearrange alter_type.sgml a bit for clarity (put the
composite-type operations together).
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/20200228004440.b23ein4qvmxnlpht@development
The closely-related function bms_hash_value is already defined in that
file, and this change means that hashfn.c no longer needs to depend on
nodes/bitmapset.h. That gets us closer to allowing use of the hash
functions in hashfn.c in frontend code.
Patch by me, reviewed by Suraj Kharage and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
When updating a table row with generated columns, only recompute those
generated columns whose base columns have changed in this update and
keep the rest unchanged. This can result in a significant performance
benefit. The required information was already kept in
RangeTblEntry.extraUpdatedCols; we just have to make use of it.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b05e781a-fa16-6b52-6738-761181204567@2ndquadrant.com
It's already tracked via ExprState->parent, so we don't need to also
include it in ExprEvalStep. When that code originally was written
ExprState->parent didn't exist, but it since has been introduced in
6719b238e8.
Author: Andres Freund
Discussion: https://postgr.es/m/20191023163849.sosqbfs5yenocez3@alap3.anarazel.de
Commit 9b63c13f0 turns out to have been fundamentally misguided:
the parent node's subPlan list is by no means the only way in which
a child SubPlan node can be hooked into the outer execution state.
As shown in bug #16213 from Matt Jibson, we can also get short-lived
tuple table slots added to the outer es_tupleTable list. At this point
I have little faith that there aren't other possible connections as
well; the long time it took to notice this problem shows that this
isn't a heavily-exercised situation.
Therefore, revert that fix, returning to the coding that passed a
NULL parent plan pointer down to the transiently-built subexpressions.
That gives us a pretty good guarantee that they won't hook into the
outer executor state in any way. But then we need some other solution
to make SubPlans work. Adopt the solution speculated about in the
previous commit's log message: do expression initialization at plan
startup for just those VALUES rows containing SubPlans, abandoning the
goal of reclaiming memory intra-query for those rows. In practice it
seems unlikely that queries containing a vast number of VALUES rows
would be using SubPlans in them, so this should not give up much.
(BTW, this test case also refutes my claim in connection with the prior
commit that the issue only arises with use of LATERAL. That was just
wrong: some variants of SubLink always produce SubPlans.)
As with previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/16213-871ac3bc208ecf23@postgresql.org
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
The core idea of this patch is to make the parser generate join alias
Vars (that is, ones with varno pointing to a JOIN RTE) only when the
alias Var is actually different from any raw join input, that is a type
coercion and/or COALESCE is necessary to generate the join output value.
Otherwise just generate varno/varattno pointing to the relevant join
input column.
In effect, this means that the planner's flatten_join_alias_vars()
transformation is already done in the parser, for all cases except
(a) columns that are merged by JOIN USING and are transformed in the
process, and (b) whole-row join Vars. In principle that would allow
us to skip doing flatten_join_alias_vars() in many more queries than
we do now, but we don't have quite enough infrastructure to know that
we can do so --- in particular there's no cheap way to know whether
there are any whole-row join Vars. I'm not sure if it's worth the
trouble to add a Query-level flag for that, and in any case it seems
like fit material for a separate patch. But even without skipping the
work entirely, this should make flatten_join_alias_vars() faster,
particularly where there are nested joins that it previously had to
flatten recursively.
An essential part of this change is to replace Var nodes'
varnoold/varoattno fields with varnosyn/varattnosyn, which have
considerably more tightly-defined meanings than the old fields: when
they differ from varno/varattno, they identify the Var's position in
an aliased JOIN RTE, and the join alias is what ruleutils.c should
print for the Var. This is necessary because the varno change
destroyed ruleutils.c's ability to find the JOIN RTE from the Var's
varno.
Another way in which this change broke ruleutils.c is that it's no
longer feasible to determine, from a JOIN RTE's joinaliasvars list,
which join columns correspond to which columns of the join's immediate
input relations. (If those are sub-joins, the joinaliasvars entries
may point to columns of their base relations, not the sub-joins.)
But that was a horrid mess requiring a lot of fragile assumptions
already, so let's just bite the bullet and add some more JOIN RTE
fields to make it more straightforward to figure that out. I added
two integer-List fields containing the relevant column numbers from
the left and right input rels, plus a count of how many merged columns
there are.
This patch depends on the ParseNamespaceColumn infrastructure that
I added in commit 5815696bc. The biggest bit of code change is
restructuring transformFromClauseItem's handling of JOINs so that
the ParseNamespaceColumn data is propagated upward correctly.
Other than that and the ruleutils fixes, everything pretty much
just works, though some processing is now inessential. I grabbed
two pieces of low-hanging fruit in that line:
1. In find_expr_references, we don't need to recurse into join alias
Vars anymore. There aren't any except for references to merged USING
columns, which are more properly handled when we scan the join's RTE.
This change actually fixes an edge-case issue: we will now record a
dependency on any type-coercion function present in a USING column's
joinaliasvar, even if that join column has no references in the query
text. The odds of the missing dependency causing a problem seem quite
small: you'd have to posit somebody dropping an implicit cast between
two data types, without removing the types themselves, and then having
a stored rule containing a whole-row Var for a join whose USING merge
depends on that cast. So I don't feel a great need to change this in
the back branches. But in theory this way is more correct.
2. markRTEForSelectPriv and markTargetListOrigin don't need to recurse
into join alias Vars either, because the cases they care about don't
apply to alias Vars for USING columns that are semantically distinct
from the underlying columns. This removes the only case in which
markVarForSelectPriv could be called with NULL for the RTE, so adjust
the comments to describe that hack as being strictly internal to
markRTEForSelectPriv.
catversion bump required due to changes in stored rules.
Discussion: https://postgr.es/m/7115.1577986646@sss.pgh.pa.us
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
The RTE_RESULT simplification logic added by commit 4be058fe9 had a
flaw: it would collapse out a RTE_RESULT that is due to compute a
PlaceHolderVar, and reassign the PHV to the parent join level, even if
another input relation of the join contained a lateral reference to
the PHV. That can't work because the PHV would be computed too late.
In practice it led to failures of internal sanity checks later in
planning (either assertion failures or errors such as "failed to
construct the join relation").
To fix, add code to check for the presence of such PHVs in relevant
portions of the query tree. Notably, this required refactoring
range_table_walker so that a caller could ask to walk individual RTEs
not the whole list. (It might be a good idea to refactor
range_table_mutator in the same way, if only to keep those functions
looking similar; but I didn't do so here as it wasn't necessary for
the bug fix.)
This exercise also taught me that find_dependent_phvs(), as it stood,
could only safely be used on the entire Query, not on subtrees.
Adjust its API to reflect that; which in passing allows it to have
a fast path for the common case of no PHVs anywhere.
Per report from Will Leinweber. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/CALLb-4xJMd4GZt2YCecMC95H-PafuWNKcmps4HLRx2NHNBfB4g@mail.gmail.com
Previously, if the startup pruning logic proved that all child nodes
of an Append or MergeAppend could be pruned, we still kept one, just
to keep EXPLAIN from failing. The previous commit removed the
ruleutils.c limitation that required this kluge, so drop it. That
results in less-confusing EXPLAIN output, as per a complaint from
Yuzuko Hosoya.
David Rowley
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
This makes such log entries more useful, since the cause of the error
can be dependent on the parameter values.
Author: Alexey Bashtanov, Álvaro Herrera
Discussion: https://postgr.es/m/0146a67b-a22a-0519-9082-bc29756b93a2@imap.cc
Reviewed-by: Peter Eisentraut, Andres Freund, Tom Lane
