It was missing lock levels FOR KEY SHARE and FOR NO KEY EXCLUSIVE; but
also SELECT FOR UPDATE is not a command separate from SELECT, as the
original text implied. It is clearer to state that FOR <lock strength>
is an option of regular SELECT.
Per suggestion from Joey Bodoia <jbodoia21@cmc.edu>
Reviewed-by: Joey Bodoia <jbodoia21@cmc.edu> (offlist)
Reviewed-by: Erikjan Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/164908765512.682.17348032020747341013@wrigleys.postgresql.org
All except one of these are new to v15. Only one of the wordsmithing
changes appears in older versions. The wordsmithing improvement does not
seem significant enough to warrant backpatching.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
It's more accurate to say that the query identifier is not shown when
compute_query_id = regress rather than to say it is hidden.
This change (ebf6c5249) appeared in v14, so it makes sense to backpatch
this small adjustment to keep the documents consistent between v14 and
master.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 14, where compute_query_id = regress was added
This tries to bring a bit more consistency to the use of the <productname>
tag in the documents. This fixes a couple of mistakes with our own
product. We definitely should be consistently calling that PostgreSQL
when we're referring to the modern-day version of the software.
This also tidies up a couple of inconsistencies with the case of other
product names, namely Emacs and Python. We also get rid of some incorrect
usages of <productname> and replace them with <literal>.
Many of these mistakes exist in the back branches, but they don't quite
seem critical enough to warrant fixing them in prior versions at this
stage.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Since babbbb5 and the introduction of LZ4 in pg_receivewal, the
compression of the WAL archived is controlled by two options:
- --compression-method with "gzip", "none" or "lz4" as possible value.
- --compress=N to specify a compression level. This includes a
backward-incompatible change where a value of 0 leads to a failure
instead of no compression enforced.
This commit takes advantage of a4b5754 and 3603f7c to rework the
compression options of pg_receivewal, as of:
- The removal of --compression-method.
- The extenction of --compress to use the same grammar as pg_basebackup,
with a METHOD:DETAIL format, where a METHOD is "gzip", "none" or "lz4"
and a DETAIL is a comma-separated list of options, the only keyword
supported is now "level" to control the compression level. If only an
integer is specified as value of this option, "none" is implied on 0
and "gzip" is implied otherwise. This brings back --compress to be
backward-compatible with ~14, while still supporting LZ4.
This has also the advantage of centralizing the set of checks used by
pg_receivewal to validate its compression options.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Google seems to like to return textsearch.html for queries about
GIN and GiST indexes, even though it's not a primary reference
for either. It seems likely that that's because those keywords
appear in the page title. Since "GIN and GiST Index Types" is
not a very apposite title for this material anyway, rename the
section in hopes of stopping that.
Also provide explicit links to the GIN and GiST chapters, to help
anyone who finds their way to this page regardless.
Per gripe from Jan Piotrowski. Back-patch to supported branches.
(Unfortunately Google is likely to continue returning the 9.1
version of this page, but improving that situation is a matter
for the www team.)
Discussion: https://postgr.es/m/164978902252.1276550.9330175733459697101@wrigleys.postgresql.org
It's misleading to call the data directory the "synchronized data
directory" when discussing a crash scenario when using pg_rewind's
--no-sync option. Here we just remove the word "synchronized" to avoid
any possible confusion.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 12, where --no-sync was added
Commit 3804539e4 neglected to update the documentation's claim that
random() uses a "linear congruential algorithm". In hopes of avoiding
the same mistake if someone replaces our PRNG again, just say it's a
deterministic pseudo-random number generator and leave it at that.
Anybody who really wants to know can look in the source code.
COMPATIBILITY NOTE FOR RELEASE NOTES: 3804539e4's commit message
really should have mentioned that the random() sequence after
setseed(), while still repeatable, will differ from what you got
in pre-v15 releases.
Noted by Dagfinn Ilmari Mannsåker; wording suggestion by Dean Rasheed.
Discussion: https://postgr.es/m/875ynfpiru.fsf@wibble.ilmari.org
The table was in the wrong section and using an older type of link, as
reported by Sirisha, and also using an older table layout, as I noticed
while trying to figure out how and when it might have got out of sync.
Defect in commit 5dc0418f.
Author: sirisha chamarthi <sirichamarthi22@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAKrAKeVk-LRHMdyT6x_p33eF6dCorM2jed5h_eHdRdv0reSYTA@mail.gmail.com
\dconfig without an argument originally printed all parameters,
but it seems more useful to print only those parameters with
non-default settings. You can easily get the show-everything
behavior with "\dconfig *", but that output is unwieldy and
seems unlikely to be wanted very often.
Per suggestion from Christoph Berg.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
The documentation of REINDEX has never mentioned that the query planner
may take an ACCESS SHARE lock on the indexes depending on the query
used. This adds also a note about prepared queries not impacted when
they do not use the index(es) rebuilt.
Author: Frédéric Yhuel
Reviewed-by: Guillaume Lelarge, Justin Pryzby
Discussion: https://postgr.es/m/65d08718-6f11-978a-4b5a-72b807d4c663@dalibo.com
This is mostly driven by trying to get rid of line-too-wide
warnings in PDF output; but I think converting to a <variablelist>
makes it more readable anyway.
Discussion: https://postgr.es/m/4183048.1649536705@sss.pgh.pa.us
There's no particular reason why this example has to use a
3-element array rather than 2-element. Shortening it makes
the result bytea narrow enough to not cause a margin overrun
in A4 format.
This includes removing documentation for stats_temp_directory, adding
documentation for stats_fetch_consistency, rephrasing references to the stats
collector and documenting that starting a cleanly shut down standby will not
remove stats anymore. The latter point might require further wordsmithing, it
wasn't easy to adjust some of the existing content.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Lukas Fittl <lukas@fittl.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
This commit adds two new columns to pg_stat_statements, called
temp_blk_read_time and temp_blk_write_time. Those columns respectively
show the time spent to read and write temporary file blocks on disk,
whose tracking has been added in efb0ef9. This information is
available when track_io_timing is enabled, like blk_read_time and
blk_write_time.
pg_stat_statements is updated to version to 1.10 as an effect of the
newly-added columns. Tests for the upgrade path 1.9->1.10 are added.
PGSS_FILE_HEADER is bumped for the new stats file format.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
Previously, the output of EXPLAIN (BUFFERS) option showed only the I/O
timing spent reading and writing shared and local buffers. This commit
adds on top of that the I/O timing for temporary buffers in the output
of EXPLAIN (for spilled external sorts, hashes, materialization. etc).
This can be helpful for users in cases where the I/O related to
temporary buffers is the bottleneck.
Like its cousin, this information is available only when track_io_timing
is enabled. Playing the patch, this is showing an extra overhead of up
to 1% even when using gettimeofday() as implementation for interval
timings, which is slightly within the usual range noise still that's
measurable.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Whitespace between tags is significant, and in some cases it creates
extra vertical space in man pages. The fix is to remove some newlines
in the markup.
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
The upstream DocBook manpages stylesheet apparently does not handle
the <substeps> element at all, and so the content comes out
unformatted, which is not useful.
As a workaround, replace <substeps> with a nested <procedure>, which
ends up effectively the same in output.
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
This option is useful to do a rewind with the server configuration file
(aka postgresql.conf) located outside the data directory, which is
something that some Linux distributions and some HA tools like to rely
on. As a result, this can simplify the logic around a rewind by
avoiding the copy of such files before running pg_rewind.
This option affects pg_rewind when it internally starts the target
cluster with some "postgres" commands, adding -c config_file=FILE to the
command strings generated, when:
- retrieving a restore_command using a "postgres -C" command for
-c/--restore-target-wal.
- forcing crash recovery once to get the cluster into a clean shutdown
state.
Author: Gunnar "Nick" Bluth
Reviewed-by: Michael Banck, Alexander Kukushkin, Michael Paquier,
Alexander Alekseev
Discussion: https://postgr.es/m/7c59265d-ac50-b0aa-ca1e-65e8bd27642a@pro-open.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
Commit 4a39f87acd changed the aggregated log format. Problem is, now
the explanatory paragraph for the log line in the document is too
long. Also the log format included more optional columns, and it's
harder to parse the log lines. This commit tries to solve the
problems.
- There's no optional log columns anymore. If a column is not
meaningful with provided pgbench option, it will be presented as 0.
- Reorder the log columns so that it's easier to parse them.
- Adjust explanatory paragraph for the log line in the doc.
Discussion: https://postgr.es/m/flat/202203280757.3tu4ovs3petm%40alvherre.pgsql
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
VACUUM VERBOSE and autovacuum log reports were taught to report the
details of how VACUUM advanced relfrozenxid (and relminmxid) by commit
872770fd. Highlight this by adding a "Tip" to the documentation, next
to related discussion of age(relfrozenxid) monitoring.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk0C1O-MKkOrj4YAfsGRru2=cA2VQpqM-9R1HNuG3nFaQ@mail.gmail.com
Adjust the documentation's coverage of aggressive VACUUMs to make it
clearer that aggressive vacuuming isn't always strictly necessary. It's
possible for non-aggressive VACUUMs to advance relfrozenxid/relminmxid
without fail, given the right workload conditions.
While this has always been true, it matters more with recent and pending
improvements to VACUUM. These improvements make non-aggressive
vacuuming more likely to advance relfrozenxid/relminmxid in practice.
While this is an unrelated improvement to the docs, formally speaking,
it still doesn't seem worth backpatching. So don't backpatch.
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
Peter Eisentraut
Alvaro Herrera
David Rowley
Michael Paquier
Tom Lane
Thomas Munro
Amit Kapila
Jeff Davis
Andrew Dunstan
Robert Haas
Daniel Gustafsson
Magnus Hagander
Andres Freund
Tomas Vondra
Stephen Frost
Tatsuo Ishii
Peter Geoghegan
Joe Conway