It's more accurate to say that the query identifier is not shown when
compute_query_id = regress rather than to say it is hidden.
This change (ebf6c5249) appeared in v14, so it makes sense to backpatch
this small adjustment to keep the documents consistent between v14 and
master.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 14, where compute_query_id = regress was added
This includes removing documentation for stats_temp_directory, adding
documentation for stats_fetch_consistency, rephrasing references to the stats
collector and documenting that starting a cleanly shut down standby will not
remove stats anymore. The latter point might require further wordsmithing, it
wasn't easy to adjust some of the existing content.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Lukas Fittl <lukas@fittl.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
SSL has become the de facto term to mean an end-to-end encrypted channel
regardless of protocol used, even though the SSL protocol is deprecated.
Clarify what we mean with SSL in our documentation, especially for new
users who might be looking for TLS.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/D4ABB281-6CFD-46C6-A4E0-8EC23A2977BC@yesql.se
Up to now, the planner estimated the size of a recursive query's
worktable as 10 times the size of the non-recursive term. It's hard
to see how to do significantly better than that automatically, but
we can give users control over the multiplier to allow tuning for
specific use-cases. The default behavior remains the same.
Simon Riggs
Discussion: https://postgr.es/m/CANbhV-EuaLm4H3g0+BSTYHEGxJj3Kht0R+rJ8vT57Dejnh=_nA@mail.gmail.com
"Hot Standby" was capitalized in a couple of places in the docs, as the
style primarily used when it was introduced, but this has not been much
respected across the years. Per discussion, it is more natural for the
reader to use "hot standby" (aka lower-case only) when in the middle of
a sentence, and "Hot standby" (aka capitalized) in a title. This commit
adjusts all the places in the docs to be consistent with this choice,
rather than applying one style or the other midway.
Author: Daniel Westermann
Reviewed-by: Kyotaro Horiguchi, Aleksander Alekseev, Robert Treat
Discussion: https://postgr.es/m/GVAP278MB093160025A779A1A5788D0EAD2039@GVAP278MB0931.CHEP278.PROD.OUTLOOK.COM
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
"regress" is a new mode added to compute_query_id aimed at facilitating
regression testing when a module computing query IDs is loaded into the
backend, like pg_stat_statements. It works the same way as "auto",
meaning that query IDs are computed if a module enables it, except that
query IDs are hidden in EXPLAIN outputs to ensure regression output
stability.
Like any GUCs of the kind (force_parallel_mode, etc.), this new
configuration can be added to an instance's postgresql.conf, or just
passed down with PGOPTIONS at command level. compute_query_id uses an
enum for its set of option values, meaning that this addition ensures
ABI compatibility.
Using this new configuration mode allows installcheck-world to pass when
running the tests on an instance with pg_stat_statements enabled,
stabilizing the test output while checking the paths doing query ID
computations.
Reported-by: Anton Melnikov
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/1634283396.372373993@f75.i.mail.ru
Discussion: https://postgr.es/m/YgHlxgc/OimuPYhH@paquier.xyz
Backpatch-through: 14
Double the default setting for hash_mem_multiplier, from 1.0 to 2.0.
This setting makes hash-based executor nodes use twice the usual
work_mem limit.
The PostgreSQL 15 release notes should have a compatibility note about
this change.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzndc_ROk6CY-bC6p9O53q974Y0Ey4WX8jcPbuTZYM4Q3A@mail.gmail.com
Previously we used poll() directly to check for a POLLRDHUP event.
Instead, use the WaitEventSet API to poll the socket for
WL_SOCKET_CLOSED, which knows how to detect this condition on many more
operating systems.
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
The log_autovacuum_min_duration instrumentation used its own dedicated
code for logging, which was not reused by VACUUM VERBOSE. This was
highly duplicative, and sometimes led to each code path using slightly
different accounting for essentially the same information.
Clean things up by making VACUUM VERBOSE reuse the same instrumentation
code. This code restructuring changes the structure of the VACUUM
VERBOSE output itself, but that seems like an overall improvement. The
most noticeable change in VACUUM VERBOSE output is that it no longer
outputs a distinct message per index per round of index vacuuming. Most
of the same information (about each index) is now shown in its new
per-operation summary message. This is far more legible.
A few details are no longer displayed by VACUUM VERBOSE, but that's no
real loss in practice, especially in the common case where we don't need
multiple index scans/rounds of vacuuming. This super fine-grained
information is still available via DEBUG2 messages, which might still be
useful in debugging scenarios.
VACUUM VERBOSE now shows new instrumentation, which is typically very
useful: all of the log_autovacuum_min_duration instrumentation that it
missed out on before now. This includes information about WAL overhead,
buffers hit/missed/dirtied information, and I/O timing information.
VACUUM VERBOSE still retains a few INFO messages of its own. This is
limited to output concerning the progress of heap rel truncation, as
well as some basic information about parallel workers. These details
are still potentially quite useful. They aren't a good fit for the log
output, which must summarize the whole operation.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmW4Me7_qR4X4ka7pxP-jGmn7=Npma_-Z-9Y1eD0MQRLw@mail.gmail.com
Provide a developer-only GUC allow_in_place_tablespaces, disabled by
default. When enabled, tablespaces can be created with an empty
LOCATION string, meaning that they should be created as a directory
directly beneath pg_tblspc. This can be used for new testing scenarios,
in a follow-up patch. Not intended for end-user usage, since it might
confuse backup tools that expect symlinks.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
Ensure to properly mark up function parameters in text with <parameter>,
avoid using <acronym> for terms which aren't acronyms and properly place
the ", and" in a value list. The acronym removal is a follow-up to commit
fb72a7b8c3 which removed it for minmax-multi. In passing, also fix an
incorrectly cased word.
Author: Ekaterina Kiryanova <e.kiryanova@postgrespro.ru>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/c050ecbc-80b2-b360-3c1d-9fe6a6a11bb5@postgrespro.ru
Backpatch-through: v14
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
The logic is implemented so as there can be a choice in the compression
used when building a WAL record, and an extra per-record bit is used to
track down if a block is compressed with PGLZ, LZ4 or nothing.
wal_compression, the existing parameter, is changed to an enum with
support for the following backward-compatible values:
- "off", the default, to not use compression.
- "pglz" or "on", to compress FPWs with PGLZ.
- "lz4", the new mode, to compress FPWs with LZ4.
Benchmarking has showed that LZ4 outclasses easily PGLZ. ZSTD would be
also an interesting choice, but going just with LZ4 for now makes the
patch minimalistic as toast compression is already able to use LZ4, so
there is no need to worry about any build-related needs for this
implementation.
Author: Andrey Borodin, Justin Pryzby
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/3037310D-ECB7-4BF1-AF20-01C10BB33A33@yandex-team.ru
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
This adds MITM and SNI as acronyms, as the documentation already had
them marked up with <acronym>.
While on it, make sure to spell man-in-the-middle with dashes
consistently, and add acronyms for those new terms where appropriate.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CE12DD5C-4BB3-4166-BC9A-39779568734C@yesql.se
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Clarify libpq.sgml's description of service file locations and
semantics. Avoid use of backtick'ed pg_config calls to describe
paths; that doesn't work on Windows, and even on Unix it's an
idiom that not all readers may be instantly familiar with.
Don't overspecify the locations of include files, instead writing
only as much as you'd use in #include directives. The previous text
in these places was incorrect for some installations, depending on
where "postgresql" is in the install path.
Our convention for referencing the user's home directory seems
to be "~", so change the one place that spelled it "$HOME".
install-windows.sgml follows the platform convention of spelling
file paths with "\", so change the one place that used "/".
Haiying Tang and Tom Lane
Discussion: https://postgr.es/m/162149020918.26174.7150424047314144297@wrigleys.postgresql.org
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
David Rowley
Robert Haas
Andres Freund
Thomas Munro
Jeff Davis
Tom Lane
Tomas Vondra
Daniel Gustafsson
Michael Paquier
Peter Geoghegan
Alvaro Herrera