This reverts commit 41aadee, as the GUC checks could run on older values
with the new values used, and result in incorrect errors if both
parameters are changed at the same time.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/27574.1581015893@sss.pgh.pa.us
Backpatch-through: 12
In certain transient states, it's possible that a table has attributes
with attgenerated set but no default expressions in pg_attrdef yet.
In that case, the old code path would not set
relation->rd_att->constr->has_generated_stored, unless
relation->rd_att->constr was also populated for some other reason.
There was probably no practical impact, but it's better to keep this
consistent.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/20200115181105.ad6ab6dlgyww3lb6%40alap3.anarazel.de
Previously PostgreSQL built with -DLWLOCK_STATS could report
more than one LWLock statistics entries for the same backend
process and the same LWLock. This is strange and only one
statistics should be output in that case, instead.
The cause of this issue is that the key variable used for
LWLock stats hash table was not fully initialized. The key
consists of two fields and they were initialized. But
the following 4 bytes allocated in the key variable for
the alignment was not initialized. So even if the same key
was specified, hash_search(HASH_ENTER) could not find
the existing entry for that key and created new one.
This commit fixes this issue by initializing the key
variable with zero. As the side effect of this commit,
the volume of LWLock statistics output would be reduced
very much.
Back-patch to v10, where commit 3761fe3c20 introduced the issue.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Kyotaro Horiguchi
Discussion: https://postgr.es/m/26359edb-798a-568f-d93a-6aafac49752d@oss.nttdata.com
This new field tracks the PID of the group leader used with parallel
query. For parallel workers and the leader, the value is set to the
PID of the group leader. So, for the group leader, the value is the
same as its own PID. Note that this reflects what PGPROC stores in
shared memory, so as leader_pid is NULL if a backend has never been
involved in parallel query. If the backend is using parallel query or
has used it at least once, the value is set until the backend exits.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Guillaume Lelarge, Michael Paquier, Tomas
Vondra
Discussion: https://postgr.es/m/CAOBaU_Yy5bt0vTPZ2_LUM6cUcGeqmYNoJ8-Rgto+c2+w3defYA@mail.gmail.com
Tuple conversion incorrectly concluded that no conversion was needed
as long as all the attributes lined up. But if the source tuple has a
missing attribute (from addition of a column with default), then the
destination tupdesc might not reflect the same default. The typical
symptom was that the affected columns would be unexpectedly NULL.
Repair by always forcing conversion if the source has missing
attributes, which will be filled in by the deform operation. (In
theory we could optimize for when the destination has the same
default, but that seemed overkill.)
Backpatch to 11 where missing attributes were added.
Per bug #16242.
Vik Fearing (discovery, code, testing) and me (analysis, testcase).
Discussion: https://postgr.es/m/16242-d1c9fca28445966b@postgresql.org
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
Commit 499be013d added this field in a rather poorly-thought-through
manner, with the result being that rather than being a field of the
Append or MergeAppend plan node as intended (and as it seems to be,
in text format), it was actually an element of the "Plans" subgroup.
At least in JSON format, that's flat out invalid syntax, because
"Plans" is an array not an object.
While it's not hard to move the generation of the field so that it
appears where it's supposed to, this does result in a visible change
in field order in text format, in cases where a Append or MergeAppend
plan node has any InitPlans attached. That's slightly annoying to
do in stable branches; but the alternative of continuing to emit
broken non-text formats seems worse.
Also, since the set of fields emitted is not supposed to be
data-dependent in non-text formats, make sure that "Subplans Removed"
appears in Append and MergeAppend nodes even when it's zero, in those
formats. (The previous coding made it look like it could appear in
some other node types such as BitmapAnd, but we don't actually support
runtime pruning there, so don't emit it in those cases.)
Per bug #16171 from Mahadevan Ramachandran. Fix by Daniel Gustafsson
and Tom Lane, reviewed by Hamid Akhtar. Back-patch to v11 where this
code came in.
Discussion: https://postgr.es/m/16171-b72259ab75505fa2@postgresql.org
When replica identity is FULL (an admittedly unusual case), the loop
that searches for tuples in execReplication.c didn't stop scanning the
table when once a matching tuple was found. Add the missing 'break'.
Note slight behavior change: we now return the first matching tuple
rather than the last one. They are supposed to be indistinguishable
anyway, so this shouldn't matter.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/379743f6-ae91-b866-f7a2-5624e6d2b0a4@postgrespro.ru
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
If we attempt to create a DSM segment when no slots are available,
we should return the memory to the operating system. Previously
we did that if the DSM_CREATE_NULL_IF_MAXSEGMENTS flag was
passed in, but we didn't do it if an error was raised. Repair.
Back-patch to 9.4, where DSM segments arrived.
Author: Thomas Munro
Reviewed-by: Robert Haas
Reported-by: Julian Backes
Discussion: https://postgr.es/m/CA%2BhUKGKAAoEw-R4om0d2YM4eqT1eGEi6%3DQot-3ceDR-SLiWVDw%40mail.gmail.com
This code would accept "strinX", where X is any 1-byte character,
as meaning "string". Clearly it wasn't meant to do that.
No back-patch, since this doesn't affect correct queries and
there's some tiny chance we'd break somebody's incorrect query
in a minor release.
Report and patch by Dominik Czarnota.
Discussion: https://postgr.es/m/CABEVAa1dU0mDCAfaT8WF2adVXTDsLVJy_izotg6ze_hh-cn8qQ@mail.gmail.com
Commit fc7695891 changed CheckAttributeType to recurse into ranges,
but made it pass down the wrong collation (always InvalidOid, since
ranges as such have no collation). This would result in guaranteed
failure when considering a range type whose subtype is collatable.
Embarrassingly, we lack any regression tests that would expose such
a problem (but fortunately, somebody noticed before we shipped this
bug in any release).
Fix it to pass down the range's subtype collation property instead,
and add some regression test cases to exercise collatable-subtype
ranges a bit more. Back-patch to all supported branches, as the
previous patch was.
Report and patch by Julien Rouhaud, test cases tweaked by me
Discussion: https://postgr.es/m/CAOBaU_aBWqNweiGUFX0guzBKkcfJ8mnnyyGC_KBQmO12Mj5f_A@mail.gmail.com
When running a lot of large parallel queries concurrently, or a plan with
a lot of separate Gather nodes, it is possible to run out of DSM slots.
There are better solutions to these problems requiring architectural
redesign work, but for now, let's adjust the constants so that it's more
difficult to hit the limit.
1. Previously, a DSA area would create up to four segments at each size
before doubling the size. After this commit, it will create only two at
each size, so it ramps up faster and therefore needs fewer slots.
2. Previously, the total limit on DSM slots allowed for 2 per connection.
Switch to 5 per connection.
Also remove an obsolete nearby comment.
Author: Thomas Munro
Reviewed-by: Robert Haas, Andres Freund
Discussion: https://postre.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
If no DSM slots are available, a ParallelContext can still be
created, but its seg pointer is NULL. Teach parallel btree build
to cope with that by falling back to a regular non-parallel build,
to avoid crashing with a segmentation fault.
Back-patch to 11, where parallel CREATE INDEX landed.
Reported-by: Nicola Contu
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CA%2BhUKGJgJEBnkuODBVomyK3MWFvDBbMVj%3Dgdt6DnRPU-5sQ6UQ%40mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Previously, TRUNCATE command through a parent table checked the
permissions on not only the parent table but also the children tables
inherited from it. This was a bug and inherited queries should perform
access permission checks on the parent table only. This commit fixes
that bug.
Back-patch to all supported branches.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwFHdSvifhJE+-GSNqUHSfbiKxaeQQ7HGcYz6SC2n_oDcg@mail.gmail.com
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
This patch creates a new extension property, "trusted". An extension
that's marked that way in its control file can be installed by a
non-superuser who has the CREATE privilege on the current database,
even if the extension contains objects that normally would have to be
created by a superuser. The objects within the extension will (by
default) be owned by the bootstrap superuser, but the extension itself
will be owned by the calling user. This allows replicating the old
behavior around trusted procedural languages, without all the
special-case logic in CREATE LANGUAGE. We have, however, chosen to
loosen the rules slightly: formerly, only a database owner could take
advantage of the special case that allowed installation of a trusted
language, but now anyone who has CREATE privilege can do so.
Having done that, we can delete the pg_pltemplate catalog, moving the
knowledge it contained into the extension script files for the various
PLs. This ends up being no change at all for the in-core PLs, but it is
a large step forward for external PLs: they can now have the same ease
of installation as core PLs do. The old "trusted PL" behavior was only
available to PLs that had entries in pg_pltemplate, but now any
extension can be marked trusted if appropriate.
This also removes one of the stumbling blocks for our Python 2 -> 3
migration, since the association of "plpythonu" with Python 2 is no
longer hard-wired into pg_pltemplate's initial contents. Exactly where
we go from here on that front remains to be settled, but one problem
is fixed.
Patch by me, reviewed by Peter Eisentraut, Stephen Frost, and others.
Discussion: https://postgr.es/m/5889.1566415762@sss.pgh.pa.us
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
EvalPlanQualStart() supposed that it could re-use the relsubs_rowmark
and relsubs_done arrays from a prior instantiation. But since they are
allocated in the es_query_cxt of the recheckestate, that's just wrong;
EvalPlanQualEnd() will blow away that storage. Therefore we were using
storage that could have been reallocated to something else, causing all
sorts of havoc.
I think this was modeled on the old code's handling of es_epqTupleSlot,
but since the code was anyway clearing the arrays at re-use, there's
clearly no expectation of importing any outside state. So it's just
a dubious savings of a couple of pallocs, which is negligible compared
to setting up a new planstate tree. Therefore, just allocate the
arrays always. (I moved the allocations slightly for readability.)
In principle this bug could cause a problem whenever EPQ rechecks are
needed in more than one target table of a ModifyTable plan node.
In practice it seems not quite so easy to trigger as that; I couldn't
readily duplicate a crash with a partitioned target table, for instance.
That's probably down to incidental choices about when to free or
reallocate stuff. The added isolation test case does seem to reliably
show an assertion failure, though.
Per report from Oleksii Kliukin. Back-patch to v12 where the bug was
introduced (evidently by commit 3fb307bc4).
Discussion: https://postgr.es/m/EEF05F66-2871-4786-992B-5F45C92FEE2E@hintbits.com
It's not OK to do that without calling CHECK_FOR_INTERRUPTS().
Let the next wait loop deal with it, following the usual pattern.
One consequence of this bug was that a SIGTERM delivered in a very
narrow timing window could leave a parallel worker process waiting
forever for a condition variable that will never be signaled, after
an error was raised in other process.
The code is a bit different in the stable branches due to commit
1321509f, making problems less likely there. No back-patch for now,
but we may finish up deciding to make a similar change after more
discussion.
Author: Thomas Munro
Reviewed-by: Shawn Debnath
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/CA%2BhUKGJOm8zZHjVA8svoNT3tHY0XdqmaC_kHitmgXDQM49m1dA%40mail.gmail.com
This gives more information to the user about the error and it makes such
messages consistent with the other similar messages in the code.
Reported-by: Simon Riggs
Author: Mahendra Singh and Simon Riggs
Reviewed-by: Beena Emerson and Amit Kapila
Discussion: https://postgr.es/m/CANP8+j+7YUvQvGxTrCiw77R23enMJ7DFmyA3buR+fa2pKs4XhA@mail.gmail.com
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
In the wake of 1f3a02173, assorted buildfarm members were warning about
"control reaches end of non-void function" or the like. Do what we've
done elsewhere: in place of a "default" switch case that will prevent
the compiler from warning about unhandled enum values, put a catchall
elog() after the switch. And return a dummy value to satisfy compilers
that don't know elog() doesn't return.
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Currently, Parallel Hash Join cannot be used for full/right joins,
so there is no point in setting the match flag. It turns out that
the cache coherence traffic generated by those writes slows down
large systems running many-core joins, so let's stop doing that.
In future, if we need to use match bits in parallel joins, we might
want to consider setting them only if not already set.
Back-patch to 11, where Parallel Hash Join arrived.
Reported-by: Deng, Gang
Discussion: https://postgr.es/m/0F44E799048C4849BAE4B91012DB910462E9897A%40SHSMSX103.ccr.corp.intel.com
The leaks have been detected by a Coverity run on Windows. No backpatch
is done as the leaks are minor.
While on it, make restricted token creation more consistent in its error
handling by logging an error instead of a warning if missing
advapi32.dll, which was missing in the NT4 days. Any modern platform
should have this DLL around. Now, if the library is not there, an error
is still reported back to the caller, and nothing is done do there is no
behavior change done in this commit.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQApa9MG0foPkgPX87fipk=vhnF2Xfg+CfUyR08h4R7Mywg@mail.gmail.com
In non-TEXT output formats, the "Settings" field should appear when
requested, even if it would be empty.
Also, get rid of the premature optimization of counting all the
GUC_EXPLAIN variables at startup. Since there was no provision for
adjusting that count later, all it'd take would be some extension marking
a parameter as GUC_EXPLAIN to risk an assertion failure or memory stomp.
We could make get_explain_guc_options() count those variables on-the-fly,
or dynamically resize its array ... but TBH I do not think that making a
transient array of pointers a bit smaller is worth any extra complication,
especially when you consider all the other transient space EXPLAIN eats.
So just allocate that array at the max possible size.
In HEAD, also add some regression test coverage for this feature.
Because of the memory-stomp hazard, back-patch to v12 where this
feature was added.
Discussion: https://postgr.es/m/19416.1580069629@sss.pgh.pa.us
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Previously, it was possible for EXPLAIN ANALYZE of a parallel query
to produce several different "Workers" fields for a single plan node,
because different portions of explain.c independently generated
per-worker data and wrapped that output in separate fields. This
is pretty bogus, especially for the structured output formats: even
if it's not technically illegal, most programs would have a hard time
dealing with such data.
To improve matters, add infrastructure that allows redirecting
per-worker values into a side data structure, and then collect that
data into a single "Workers" field after we've finished running all
the relevant code for a given plan node.
There are a few visible side-effects:
* In text format, instead of something like
Sort Method: external merge Disk: 4920kB
Worker 0: Sort Method: external merge Disk: 5880kB
Worker 1: Sort Method: external merge Disk: 5920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Buffers: shared hit=345 read=3507, temp read=505 written=744
you get
Sort Method: external merge Disk: 4920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Sort Method: external merge Disk: 5880kB
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Sort Method: external merge Disk: 5920kB
Buffers: shared hit=345 read=3507, temp read=505 written=744
* When JIT is enabled, any relevant per-worker JIT stats are attached
to the child node of the Gather or Gather Merge node, which is where
the other per-worker output has always been. Previously, that info
was attached directly to a Gather node, or missed entirely for Gather
Merge.
* A query's summary JIT data no longer includes a bogus
"Worker Number: -1" field.
A notable code-level change is that indenting for lines of text-format
output should now be handled by calling "ExplainIndentText(es)",
instead of hard-wiring how much space to emit. This seems a good deal
cleaner anyway.
This patch also adds a new "explain.sql" regression test script that's
dedicated to testing EXPLAIN. There is more that can be done in that
line, certainly, but for now it just adds some coverage of the XML and
YAML output formats, which had been completely untested.
Although this is surely a bug fix, it's not clear that people would
be happy with rearranging EXPLAIN output in a minor release, so apply
to HEAD only.
Maciek Sakrejda and Tom Lane, based on an idea of Andres Freund's;
reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/CAOtHd0AvAA8CLB9Xz0wnxu1U=zJCKrr1r4QwwXi_kcQsHDVU=Q@mail.gmail.com
At first glance, this function seems useful, but it actually increases
the amount of code required rather than decreasing it. Inline the
logic into the callers instead; most callers don't use the 'lexeme'
argument for anything and as a result considerable simplification is
possible.
Along the way, fix the header comment for the nearby function
lex_expect(), which mislabeled it as lex_accept().
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Keep the code that pertains to the 'json' data type in json.c, but
move the lexing and parsing code to a new file jsonapi.c, a name
I chose because the corresponding prototypes are in jsonapi.h.
This seems like a logical division, because the JSON lexer and parser
are also used by the 'jsonb' data type, but the SQL-callable functions
in json.c are a separate thing. Also, the new jsonapi.c file needs to
include far fewer header files than json.c, which seems like a good
sign that this is an appropriate place to insert an abstraction
boundary. I took the opportunity to remove a few apparently-unneeded
includes from json.c at the same time.
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan. The previous commit was, too, but I forgot to note it
in the commit message.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
Michael Paquier
Peter Eisentraut
Jeff Davis
Amit Kapila
Fujii Masao
Andrew Gierth
Alvaro Herrera
Thomas Munro
Tom Lane
Robert Haas
Heikki Linnakangas
Dean Rasheed