an exclusive lock on the table at this point, which we want to release as soon
as possible. This is called in the phase of lazy vacuum where we truncate the
empty pages at the end of the table.
An alternative solution would be to lower the vacuum delay settings before
starting the truncating phase, but this doesn't work very well in autovacuum
due to the autobalancing code (which can cause other processes to change our
cost delay settings). This case could be considered in the balancing code, but
it is simpler this way.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
to avoid losing useful Xid information in not-so-old tuples. This makes
CLUSTER behave the same as VACUUM as far a tuple-freezing behavior goes
(though CLUSTER does not yet advance the table's relfrozenxid).
While at it, move the actual freezing operation in rewriteheap.c to a more
appropriate place, and document it thoroughly. This part of the patch from
Tom Lane.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
partial. None of the existing AMs do anything useful except counting
tuples when there's nothing to delete, and we can get a tuple count
from the heap as long as it's not a partial index. (hash actually can
skip anyway because it maintains a tuple count in the index metapage.)
GIST is not currently able to exploit this optimization because, due to
failure to index NULLs, GIST is always effectively partial. Possibly
we should fix that sometime.
Simon Riggs w/ some review by Tom Lane.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
in which invalid page data could be transiently written to disk by
concurrent bgwriter activity. There doesn't seem any risk of loss of
actual user data, but an empty page could possibly be left corrupt if a
crash occurs before the correct data gets written out. Pointed out by
Alvaro Herrera.
on a page, as suggested by ITAGAKI Takahiro. Also, change a few places
that were using some other estimates of max-items-per-page to consistently
use MaxOffsetNumber. This is conservatively large --- we could have used
the new MaxHeapTuplesPerPage macro, or a similar one for index tuples ---
but those places are simply declaring a fixed-size buffer and assuming it
will work, rather than actively testing for overrun. It seems safer to
size these buffers in a way that can't overflow even if the page is
corrupt.
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
actual number of unremoved tuples as pg_class.reltuples. The idea of
trying to estimate a steady state condition still seems attractive, but
this particular implementation crashed and burned ...
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
now are supposed to take some kind of lock on an index whenever you
are going to access the index contents, rather than relying only on a
lock on the parent table.
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
end of a btree index. This isn't super-effective, since we won't move
nondeletable pages, but it's better than nothing. Also, improve stats
displayed during VACUUM VERBOSE.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
HeapTupleHeaderData in setter and getter macros called
HeapTupleHeaderGetXmin, HeapTupleHeaderSetXmin etc.
It also introduces a "virtual" field xvac by defining
HeapTupleHeaderGetXvac and HeapTupleHeaderSetXvac. Xvac is used by
VACUUM, in fact it is stored in t_cmin.
Manfred Koizar
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.