This reverts commit 16304a0134, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
All known standard library implementations of these functions can fail
with ENOMEM. A caller neglecting to check for failure would experience
missing output, information exposure, or a crash. Check return values
within wrappers and code, currently just snprintf.c, that bypasses the
wrappers. The wrappers do not return after an error, so their callers
need not check. Back-patch to 9.0 (all supported versions).
Popular free software standard library implementations do take pains to
bypass malloc() in simple cases, but they risk ENOMEM for floating point
numbers, positional arguments, large field widths, and large precisions.
No specification demands such caution, so this commit regards every call
to a printf family function as a potential threat.
Injecting the wrappers implicitly is a compromise between patch scope
and design goals. I would prefer to edit each call site to name a
wrapper explicitly. libpq and the ECPG libraries would, ideally, convey
errors to the caller rather than abort(). All that would be painfully
invasive for a back-patched security fix, hence this compromise.
Security: CVE-2015-3166
If someone else already set the callbacks, don't overwrite them with
ours. When unsetting the callbacks, only unset them if they point to
ours.
Author: Jan Urbański <wulczer@wulczer.org>
This is the second try at this, after fcef161729 failed miserably and
had to be reverted: as it turns out, libpq cannot depend on libpgcommon
after all. Instead of shuffling code in the master branch, make that one
just like 9.4 and accept the duplication. (This was all my own mistake,
not the patch submitter's).
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
This is a possibly-vain effort to silence a Coverity warning about
bogus endianness dependency. The code's fine, because it takes care
of endianness issues for itself, but Coverity sees an int64 being
passed to an int* argument and not unreasonably suspects something's
wrong. I'm not sure if putting the void* cast in the way will shut it
up; but it can't hurt and seems better from a documentation standpoint
anyway, since the pointer is not used as an int* in this code path.
Just for a bit of additional safety, verify that the result length
is 8 bytes as expected.
Back-patch to 9.3 where the code in question was added.
The SGML docs claimed that 1-byte integers could be sent or received with
the "isint" options, but no such behavior has ever been implemented in
pqGetInt() or pqPutInt(). The in-code documentation header for PQfn() was
even less in tune with reality, and the code itself used parameter names
matching neither the SGML docs nor its libpq-fe.h declaration. Do a bit
of additional wordsmithing on the SGML docs while at it.
Since the business about 1-byte integers is a clear documentation bug,
back-patch to all supported branches.
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
After finding an "=" character, the pointer was advanced twice when it
should only advance once. This is harmless as long as the value after "="
has at least one character; but if it doesn't, we'd miss the terminator
character and include too much in the value.
In principle this could lead to reading off the end of memory. It does not
seem worth treating as a security issue though, because it would happen on
client side, and besides client logic that's taking conninfo strings from
untrusted sources has much worse security problems than this.
Report and patch received off-list from Thomas Fanghaenel.
Back-patch to 9.2 where the faulty code was introduced.
All the other new SSL information functions had dummy versions in
be-secure.c, but I missed PQsslAttributes(). Oops. Surprisingly, the linker
did not complain about the missing function on most platforms represented in
the buildfarm, even though it is exported, except for a few Windows systems.
This makes it possible to query for things like the SSL version and cipher
used, without depending on OpenSSL functions or macros. That is a good
thing if we ever get another SSL implementation.
PQgetssl() still works, but it should be considered as deprecated as it
only works with OpenSSL. In particular, PQgetSslInUse() should be used to
check if a connection uses SSL, because as soon as we have another
implementation, PQgetssl() will return NULL even if SSL is in use.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Some users run their applications in chroot environments that lack an
/etc/passwd file. This means that the current UID's user name and home
directory are not obtainable. libpq used to be all right with that,
so long as the database role name to use was specified explicitly.
But commit a4c8f14364 broke such cases by
causing any failure of pg_fe_getauthname() to be treated as a hard error.
In any case it did little to advance its nominal goal of causing errors
in pg_fe_getauthname() to be reported better. So revert that and instead
put some real error-reporting code in place. This requires changes to the
APIs of pg_fe_getauthname() and pqGetpwuid(), since the latter had
departed from the POSIX-specified API of getpwuid_r() in a way that made
it impossible to distinguish actual lookup errors from "no such user".
To allow such failures to be reported, while not failing if the caller
supplies a role name, add a second call of pg_fe_getauthname() in
connectOptions2(). This is a tad ugly, and could perhaps be avoided with
some refactoring of PQsetdbLogin(), but I'll leave that idea for later.
(Note that the complained-of misbehavior only occurs in PQsetdbLogin,
not when using the PQconnect functions, because in the latter we will
never bother to call pg_fe_getauthname() if the user gives a role name.)
In passing also clean up the Windows-side usage of GetUserName(): the
recommended buffer size is 257 bytes, the passed buffer length should
be the buffer size not buffer size less 1, and any error is reported
by GetLastError() not errno.
Per report from Christoph Berg. Back-patch to 9.4 where the chroot
failure case was introduced. The generally poor reporting of errors
here is of very long standing, of course, but given the lack of field
complaints about it we won't risk changing these APIs further back
(even though they're theoretically internal to libpq).
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
This improves consistency with the MSVC build. On buildfarm member
narwhal, since commit 846e91e022,
shfolder.dll:SHGetFolderPath() crashes when dblink calls it by way of
pqGetHomeDirectory(). Back-patch to 9.4, where that commit first
appeared. How it caused this regression remains a mystery. This is a
partial revert of commit 889f038129, which
adopted shfolder.dll for Windows NT 4.0 compatibility. PostgreSQL 8.2
dropped support for that operating system.
The RFCs say that the CN must not be checked if a subjectAltName extension
of type dNSName is present. IOW, if subjectAltName extension is present,
but there are no dNSNames, we can still check the CN.
Alexey Klyukin
This patch makes libpq check the server's hostname against DNS names listed
in the X509 subjectAltName extension field in the server certificate. This
allows the same certificate to be used for multiple domain names. If there
are no SANs in the certificate, the Common Name field is used, like before
this patch. If both are given, the Common Name is ignored. That is a bit
surprising, but that's the behavior mandated by the relevant RFCs, and it's
also what the common web browsers do.
This also adds a libpq_ngettext helper macro to allow plural messages to be
translated in libpq. Apparently this happened to be the first plural message
in libpq, so it was not needed before.
Alexey Klyukin, with some kibitzing by me.
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
Based on the old comment, it took me a while to figure out what the
problem was. The importnat detail is that SSL_read() can return WANT_READ
even though some raw data was received from the socket.
ws2_32 is the new version of the library that should be used, as
it contains the require functionality from wsock32 as well as some
more (which is why some binaries were already using ws2_32).
Michael Paquier, reviewed by MauMau
If the server sends a long stream of data, and the server + network are
consistently fast enough to force the recv() loop in pqReadData() to
iterate until libpq's input buffer is full, then upon processing the last
incomplete message in each bufferload we'd usually double the buffer size,
due to supposing that we didn't have enough room in the buffer to finish
collecting that message. After filling the newly-enlarged buffer, the
cycle repeats, eventually resulting in an out-of-memory situation (which
would be reported misleadingly as "lost synchronization with server").
Of course, we should not enlarge the buffer unless we still need room
after discarding already-processed messages.
This bug dates back quite a long time: pqParseInput3 has had the behavior
since perhaps 2003, getCopyDataMessage at least since commit 70066eb1a1
in 2008. Probably the reason it's not been isolated before is that in
common environments the recv() loop would always be faster than the server
(if on the same machine) or faster than the network (if not); or at least
it wouldn't be slower consistently enough to let the buffer ramp up to a
problematic size. The reported cases involve Windows, which perhaps has
different timing behavior than other platforms.
Per bug #7914 from Shin-ichi Morita, though this is different from his
proposed solution. Back-patch to all supported branches.
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
Previously, these functions treated "" optin values as defaults in some
ways, but not in others, like when comparing to .pgpass. Also, add
documentation to clarify that now "" and NULL use defaults, like
PQsetdbLogin() has always done.
BACKWARD INCOMPATIBILITY
Patch by Adrian Vondendriesch, docs by me
Report by Jeff Janes
Introduced in 585bca39: msgid is not used in the Windows code path.
Also adjust comments a tad (mostly to keep pgindent from messing it up).
David Rowley
Previously, 'int' was used for socket values in libpq, but socket values
are unsigned on Windows. This is a style correction.
Initial patch and previous PGINVALID_SOCKET initial patch by Joel
Jacobson, modified by me
Report from PVS-Studio
Bind attempts to an LDAP server should time out after two seconds,
allowing additional lines in the service control file to be parsed
(which provide a fall back to a secondary LDAP server or default options).
The existing code failed to enforce that timeout during TCP connect,
resulting in a hang far longer than two seconds if the LDAP server
does not respond.
Laurenz Albe
Previously, in some places, socket creation errors were checked for
negative values, which is not true for Windows because sockets are
unsigned. This masked socket creation errors on Windows.
Backpatch through 9.0. 8.4 doesn't have the infrastructure to fix this.
"8" was correct back when "disable" was the longest allowed value, but
since "verify-full" was added, it should be "12". Given the lack of
complaints, I wouldn't be surprised if nobody is actually using these
values ... but still, if they're in the API, they should be right.
Noticed while pursuing a different problem. It's been wrong for quite
a long time, so back-patch to all supported branches.
A number of issues were identified by the Coverity scanner and are
addressed in this patch. None of these appear to be security issues
and many are mostly cosmetic changes.
Short comments for each of the changes follows.
Correct the semi-colon placement in be-secure.c regarding SSL retries.
Remove a useless comparison-to-NULL in proc.c (value is dereferenced
prior to this check and therefore can't be NULL).
Add checking of chmod() return values to initdb.
Fix a couple minor memory leaks in initdb.
Fix memory leak in pg_ctl- involves free'ing the config file contents.
Use an int to capture fgetc() return instead of an enum in pg_dump.
Fix minor memory leaks in pg_dump.
(note minor change to convertOperatorReference()'s API)
Check fclose()/remove() return codes in psql.
Check fstat(), find_my_exec() return codes in psql.
Various ECPG memory leak fixes.
Check find_my_exec() return in ECPG.
Explicitly ignore pqFlush return in libpq error-path.
Change PQfnumber() to avoid doing an strdup() when no changes required.
Remove a few useless check-against-NULL's (value deref'd beforehand).
Check rmtree(), malloc() results in pg_regress.
Also check get_alternative_expectfile() return in pg_regress.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
In pqSendSome, if the connection is already closed at entry, discard any
queued output data before returning. There is no possibility of ever
sending the data, and anyway this corresponds to what we'd do if we'd
detected a hard error while trying to send(). This avoids possible
indefinite bloat of the output buffer if the application keeps trying
to send data (or even just keeps trying to do PQputCopyEnd, as psql
indeed will).
Because PQputCopyEnd won't transition out of PGASYNC_COPY_IN state
until it's successfully queued the COPY END message, and pqPutMsgEnd
doesn't distinguish a queuing failure from a pqSendSome failure,
this omission allowed an infinite loop in psql if the connection closure
occurred when we had at least 8K queued to send. It might be worth
refactoring so that we can make that distinction, but for the moment
the other changes made here seem to offer adequate defenses.
To guard against other variants of this scenario, do not allow
PQgetResult to return a PGRES_COPY_XXX result if the connection is
already known dead. Make sure it returns PGRES_FATAL_ERROR instead.
Per report from Stephen Frost. Back-patch to all active branches.
This has long been done by the MSVC build system, and has caused
confusion in the past when programs like psql have failed to start
because they can't find the DLL. If it's in the same directory as it now
will be they will find it.
Backpatch to all live branches.
Commit 820f08cabd claimed to make the server
and libpq handle SSL protocol versions identically, but actually the server
was still accepting SSL v3 protocol while libpq wasn't. Per discussion,
SSL v3 is obsolete, and there's no good reason to continue to accept it.
So make the code really equivalent on both sides. The behavior now is
that we use the highest mutually-supported TLS protocol version.
Marko Kreen, some comment-smithing by me
Per report from Jeffrey Walton, libpq has been accepting only TLSv1
exactly. Along the lines of the backend code, libpq will now support
new versions as OpenSSL adds them.
Marko Kreen, reviewed by Wim Lewis.
There was a bug in the psql's meta command \conninfo. When the
IP address was specified in the hostaddr and psql used it to create
a connection (i.e., psql -d "hostaddr=xxx"), \conninfo could not
display that address. This is because \conninfo got the connection
information only from PQhost() which could not return hostaddr.
This patch adds PQhostaddr(), and changes \conninfo so that it
can display not only the host name that PQhost() returns but also
the IP address which PQhostaddr() returns.
The bug has existed since 9.1 where \conninfo was introduced.
But it's too late to add new libpq function into the released versions,
so no backpatch.
In the platform that doesn't support Unix-domain socket, when
neither host nor hostaddr are specified, the default host
'localhost' is used to connect to the server and PQhost() must
return that, but it didn't. This patch fixes PQhost() so that
it returns the default host in that case.
Also this patch fixes PQhost() so that it doesn't return
Unix-domain socket directory path in the platform that doesn't
support Unix-domain socket.
Back-patch to all supported versions.
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Previously missing or invalid service files returned NULL. Also fix
pg_upgrade to report "out of memory" for a null return from
PQconndefaults().
Patch by Steve Singer, rewritten by me
When using a C99-compliant vsnprintf, we can use its report of the required
buffer size to avoid making multiple loops through the formatting logic.
This is similar to the changes recently made in stringinfo.c, but we can't
use psprintf.c here because in libpq we don't want to exit() on error.
(The behavior pqexpbuffer.c has historically used is to mark the
PQExpBuffer as "broken", ie empty, if it runs into any fatal problem.)
To avoid duplicating code more than necessary, I refactored
printfPQExpBuffer and appendPQExpBuffer to share a subroutine that's
very similar to psprintf.c's pvsnprintf in spirit.
asprintf(), aside from not being particularly portable, has a fundamentally
badly-designed API; the psprintf() function that was added in passing in
the previous patch has a much better API choice. Moreover, the NetBSD
implementation that was borrowed for the previous patch doesn't work with
non-C99-compliant vsnprintf, which is something we still have to cope with
on some platforms; and it depends on va_copy which isn't all that portable
either. Get rid of that code in favor of an implementation similar to what
we've used for many years in stringinfo.c. Also, move it into libpgcommon
since it's not really libpgport material.
I think this patch will be enough to turn the buildfarm green again, but
there's still cosmetic work left to do, namely get rid of pg_asprintf()
in favor of using psprintf(). That will come in a followon patch.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
In libpq, we set up and pass to OpenSSL callback routines to handle
locking. When we run out of SSL connections, we try to clean things
up by de-registering the hooks. Unfortunately, we had a few calls
into the OpenSSL library after these hooks were de-registered during
SSL cleanup which lead to deadlocking. This moves the thread callback
cleanup to be after all SSL-cleanup related OpenSSL library calls.
I've been unable to reproduce the deadlock with this fix.
In passing, also move the close_SSL call to be after unlocking our
ssl_config mutex when in a failure state. While it looks pretty
unlikely to be an issue, it could have resulted in deadlocks if we
ended up in this code path due to something other than SSL_new
failing. Thanks to Heikki for pointing this out.
Back-patch to all supported versions; note that the close_SSL issue
only goes back to 9.0, so that hunk isn't included in the 8.4 patch.
Initially found and reported by Vesa-Matti J Kari; many thanks to
both Heikki and Andres for their help running down the specific
issue and reviewing the patch.
We should really be reporting a useful error along with returning
a valid return code if pthread_mutex_lock() throws an error for
some reason. Add that and back-patch to 9.0 as the prior patch.
Pointed out by Alvaro Herrera
I've been working with Nick Phillips on an issue he ran into when
trying to use threads with SSL client certificates. As it turns out,
the call in initialize_SSL() to SSL_CTX_use_certificate_chain_file()
will modify our SSL_context without any protection from other threads
also calling that function or being at some other point and trying to
read from SSL_context.
To protect against this, I've written up the attached (based on an
initial patch from Nick and much subsequent discussion) which puts
locks around SSL_CTX_use_certificate_chain_file() and all of the other
users of SSL_context which weren't already protected.
Nick Phillips, much reworked by Stephen Frost
Back-patch to 9.0 where we started loading the cert directly instead of
using a callback.
On Unix-ish platforms, EWOULDBLOCK may be the same as EAGAIN, which is
*not* a success return, at least not on Linux. We need to treat it as a
failure to avoid giving a misleading error message. Per the Single Unix
Spec, only EINPROGRESS and EINTR returns indicate that the connection
attempt is in progress.
On Windows, on the other hand, EWOULDBLOCK (WSAEWOULDBLOCK) is the expected
case. We must accept EINPROGRESS as well because Cygwin will return that,
and it doesn't seem worth distinguishing Cygwin from native Windows here.
It's not very clear whether EINTR can occur on Windows, but let's leave
that part of the logic alone in the absence of concrete trouble reports.
Also, remove the test for errno == 0, effectively reverting commit
da9501bddb, which AFAICS was just a thinko;
or at best it might have been a workaround for a platform-specific bug,
which we can hope is gone now thirteen years later. In any case, since
libpq makes no effort to reset errno to zero before calling connect(),
it seems unlikely that that test has ever reliably done anything useful.
Andres Freund and Tom Lane
Previously, libpq and the backend had opposite ideas about whether
it was necessary for the client to send a CopyDone message after
receiving an ErrorResponse, making it impossible to cleanly exit
COPY BOTH mode. Fix libpq so that works correctly, adopting the
backend's notion that an ErrorResponse kills the copy in both
directions.
Adjust receivelog.c to avoid a degradation in the quality of the
resulting error messages. libpqwalreceiver.c is already doing
the right thing, so no adjustment needed there.
Add an explicit statement to the documentation explaining how
this part of the protocol is supposed to work, in the hopes of
avoiding future confusion in this area.
Since the consequences of all this confusion are very limited,
especially in the back-branches where no client ever attempts
to exit COPY BOTH mode without closing the connection entirely,
no back-patch.
There's probably no real bug here at present, so not backpatching.
But it seems good to make these bits consistent with the rest of
libpq, so as to avoid future surprises.
Patch by me. Review by Tom Lane.
We need this in non-ENABLE_THREAD_SAFETY builds, and also to satisfy
the exports.txt entry; while it might be a good idea to remove the
latter, I'm hesitant to do so except in the context of an intentional
ABI break. At least we don't have a separately maintained source file
for it anymore.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
This bug goes back to the original Postgres95 sources. Its significance
to modern PG versions is marginal, since we have not used PQprintTuples()
internally in a very long time, and it doesn't seem to have ever been
documented either. Still, it *is* exposed to client apps, so somebody
out there might possibly be using it.
Xi Wang
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
This allows a caller to get back the exact conninfo array that was
used to create a connection, including parameters read from the
environment.
In doing this, restructure how options are copied from the conninfo
to the actual connection.
Zoltan Boszormenyi and Magnus Hagander
The length of a socket path name is constrained by the size of struct
sockaddr_un, and there's not a lot we can do about it since that is a
kernel API. However, it would be a good thing if we produced an
intelligible error message when the user specifies a socket path that's too
long --- and getaddrinfo's standard API is too impoverished to do this in
the natural way. So insert explicit tests at the places where we construct
a socket path name. Now you'll get an error that makes sense and even
tells you what the limit is, rather than something generic like
"Non-recoverable failure in name resolution".
Per trouble report from Jeremy Drake and a fix idea from Andrew Dunstan.
I found that these functions tend to return -1 while leaving an empty error
message string in the PGconn, if they suffer some kind of I/O error on the
file. The reason is that lo_close, which thinks it's executed a perfectly
fine SQL command, clears the errorMessage. The minimum-change workaround
is to reorder operations here so that we don't fill the errorMessage until
after lo_close.
libpq defines these functions as accepting "size_t" lengths ... but the
underlying backend functions expect signed int32 length parameters, and so
will misinterpret any value exceeding INT_MAX. Fix the libpq side to throw
error rather than possibly doing something unexpected.
This is a bug of long standing, but I doubt it's worth back-patching. The
problem is really pretty academic anyway with lo_read/lo_write, since any
caller expecting sane behavior would have to have provided a multi-gigabyte
buffer. It's slightly more pressing with lo_truncate, but still we haven't
supported large objects over 2GB until now.
Fix broken-on-bigendian-machines byte-swapping functions, add missed update
of alternate regression expected file, improve error reporting, remove some
unnecessary code, sync testlo64.c with current testlo.c (it seems to have
been cloned from a very old copy of that), assorted cosmetic improvements.
Get rid of the fundamentally indefensible assumption that "long long int"
exists and is exactly 64 bits wide on every platform Postgres runs on.
Instead let the configure script select the type to use for "pg_int64".
This is a bit of a pain in the rear since we do not want to pollute client
namespace with all the random symbols that pg_config.h defines; instead
we have to create a separate generated header file, "pg_config_ext.h".
But now that the infrastructure is there, we might have the ability to
add some other stuff that's long been wanting in this area.
4TB large objects (standard 8KB BLCKSZ case). For this purpose new
libpq API lo_lseek64, lo_tell64 and lo_truncate64 are added. Also
corresponding new backend functions lo_lseek64, lo_tell64 and
lo_truncate64 are added. inv_api.c is changed to handle 64-bit
offsets.
Patch contributed by Nozomi Anzai (backend side) and Yugo Nagata
(frontend side, docs, regression tests and example program). Reviewed
by Kohei Kaigai. Committed by Tatsuo Ishii with minor editings.
Create an internal function pqDropConnection that does the physical socket
close and cleans up closely-associated state. This removes a bunch of ad
hoc, not always consistent closure code. The ulterior motive is to have a
single place to wait for a spawned child backend to exit, but this seems
like good cleanup even if that never happens.
I went back and forth on whether to include "conn->status = CONNECTION_BAD"
in pqDropConnection's actions, but for the moment decided not to. Only a
minority of the call sites actually want that, and in any case it's
arguable that conn->status is slightly higher-level state, and thus not
part of this function's purview.
The maximum number of parameters supported by the FE/BE protocol is 65535,
as it's transmitted as a 16-bit unsigned integer. However, the nParams
arguments to libpq functions are all of type 'int'. We can't change the
signature of libpq functions, but a simple bounds check is in order to make
it more clear what's going wrong if you try to pass more than 65535
parameters.
Per complaint from Jim Vanns.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
This includes fixing the MSVC copy of ecpg/preproc's version info, which
seems to have been overlooked repeatedly. Can't we fix that so there are
not two copies??
Drop special handling of host component with slashes to mean
Unix-domain socket. Specify it as separate parameter or using
percent-encoding now.
Allow omitting username, password, and port even if the corresponding
designators are present in URI.
Handle percent-encoding in query parameter keywords.
Alex Shulgin
some documentation improvements by myself
For the record, fe-print.c is also missing, but it's sort of
deprecated, and the string internationalization there has some issues,
and it doesn't seem worth fixing that. So let's leave that out.
postgres:// URIs are an attempt to "stop the bleeding" in this general
area that has been said to occur due to external projects adopting their
own syntaxes. The syntaxes supported by this patch:
postgres://[user[:pwd]@][unix-socket][:port[/dbname]][?param1=value1&...]
postgres://[user[:pwd]@][net-location][:port][/dbname][?param1=value1&...]
should be enough to cover most interesting cases without having to
resort to "param=value" pairs, but those are provided for the cases that
need them regardless.
libpq documentation has been shuffled around a bit, to avoid stuffing
all the format details into the PQconnectdbParams description, which was
already a bit overwhelming. The list of keywords has moved to its own
subsection, and the details on the URI format live in another subsection.
This includes a simple test program, as requested in discussion, to
ensure that interesting corner cases continue to work appropriately in
the future.
Author: Alexander Shulgin
Some tweaking by Álvaro Herrera, Greg Smith, Daniel Farina, Peter Eisentraut
Reviewed by Robert Haas, Alexey Klyukin (offlist), Heikki Linnakangas,
Marko Kreen, and others
Oh, it also supports postgresql:// but that's probably just an accident.
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
When using connection info arrays with a conninfo string in the dbname
slot, some memory would be leaked if an error occurred while
processing the following array slots.
found by Coverity
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
In some hopeless situations, certain library functions in libpq and
libpgport quit the program. Use abort() for that instead of exit(),
so we don't interfere with the normal exit codes the program might
use, we clearly signal the abnormal termination, and the caller has a
chance of catching the termination.
This was originally pointed out by Debian's Lintian program.
This has been broken just about forever (or more specifically, commit
7f4981f4af) and nobody noticed until
Richard Huxton reported it recently. Analysis and fix by Ross
Reedstrom, although I didn't use his patch. This doesn't seem
important enough to back-patch and is mildly backward incompatible, so
I'm just doing this in master.
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
This makes it possible to use a libpq app with home directory set
to /dev/null, for example - treating it the same as if the file
doesn't exist (which it doesn't).
Per bug #6302, reported by Diego Elio Petteno
The keywords and values arguments of these functions are more properly
declared "const char * const *" than just "const char **".
Lionel Elie Mamane, reviewed by Craig Ringer
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
The previous test for status < 0 test is in fact testing nothing if the
compiler considers an enum to be an unsigned data type. clang doesn't
like tautologies, so do this instead.
Report by Peter Geoghegan, fix as suggested by Tom Lane.
On balance, the need to cover this case changes my mind in favor of pushing
all error-message generation duties into the two fe-secure.c routines.
So do it that way.
In many cases, pqsecure_read/pqsecure_write set up useful error messages,
which were then overwritten with useless ones by their callers. Fix this
by defining the responsibility to set an error message to be entirely that
of the lower-level function when using SSL.
Back-patch to 8.3; the code is too different in 8.2 to be worth the
trouble.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
PQsetvalue unnecessarily duplicated the logic in pqAddTuple, and didn't
duplicate it exactly either --- pqAddTuple does not care what is in the
tuple-pointer array positions beyond the last valid entry, whereas the
code in PQsetvalue assumed such positions would contain NULL. This led
to possible crashes if PQsetvalue was applied to a PGresult that had
previously been enlarged with pqAddTuple, for instance one built from a
server query. Fix by relying on pqAddTuple instead of duplicating logic,
and not assuming anything about the contents of res->tuples[res->ntups].
Back-patch to 8.4, where PQsetvalue was introduced.
Andrew Chernow
The --flag argument can be used to tell xgettext the arguments of
which functions should be flagged with c-format in the PO files,
instead of guessing based on the presence of format specifiers, which
fails if no format specifiers are present but the translation
accidentally introduces one.
Appropriate flag settings have been added for each message catalog.
based on a patch by Christoph Berg for bug #6066
It currently doesn't make a difference, but it's inconsistent with
most other usage, and it might interfere with a future patch, so I'll
change it all in a separate commit.
Also, replace tabs with spaces for alignment.
This unifies a bunch of ugly #ifdef's in one place. Per discussion,
we only need this where HAVE_UNIX_SOCKETS, so no need to cover Windows.
Marko Kreen, some adjustment by Tom Lane
It turns out the reason we hadn't found out about the portability issues
with our credential-control-message code is that almost no modern platforms
use that code at all; the ones that used to need it now offer getpeereid(),
which we choose first. The last holdout was NetBSD, and they added
getpeereid() as of 5.0. So far as I can tell, the only live platform on
which that code was being exercised was Debian/kFreeBSD, ie, FreeBSD kernel
with Linux userland --- since glibc doesn't provide getpeereid(), we fell
back to the control message code. However, the FreeBSD kernel provides a
LOCAL_PEERCRED socket parameter that's functionally equivalent to Linux's
SO_PEERCRED. That is both much simpler to use than control messages, and
superior because it doesn't require receiving a message from the other end
at just the right time.
Therefore, add code to use LOCAL_PEERCRED when necessary, and rip out all
the credential-control-message code in the backend. (libpq still has such
code so that it can still talk to pre-9.1 servers ... but eventually we can
get rid of it there too.) Clean up related autoconf probes, too.
This means that libpq's requirepeer parameter now works on exactly the same
platforms where the backend supports peer authentication, so adjust the
documentation accordingly.
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
Even though this only affects the insertion of a parenthesized word,
it's unwise to assume that parentheses can pass through untranslated.
And in any case, the new version is clearer in the code and for
translators.
The code to assemble ldap_get_values_len's output into a single string
wrote the terminating null one byte past where it should. Fix that,
and make some other cosmetic adjustments to make the code a trifle more
readable and more in line with usual Postgres coding style.
Also, free the "result" string when done with it, to avoid a permanent
memory leak.
Bug report and patch by Albe Laurenz, cosmetic adjustments by me.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This would lead to leaking the PGconn structure after an error detected by
conninfo_array_parse(), as well as failing to return a useful error message
in such cases. Backpatch to 9.0 where the error was introduced.
Joseph Adams
Instead, just act as though the certificate file(s) are not present.
There is only one case where this need be a hard failure condition: when
sslmode is verify-ca or verify-full, not having a root cert file is an
error. Change the logic so that we complain only in that case, and
otherwise fall through cleanly. This is how it used to behave pre-9.0,
but my patch 4ed4b6c54e of 2010-05-26 broke
the case. Per report from Christian Kastner.
Add a new libpq connection option client_encoding (which includes the
existing PGCLIENTENCODING environment variable), which besides an
encoding name accepts a special value "auto" that tries to determine
the encoding from the locale in the client's environment, using the
mechanisms that have been in use in initdb.
psql sets this new connection option to "auto" when running from a
terminal and not overridden by setting PGCLIENTENCODING.
original code by Heikki Linnakangas, with subsequent contributions by
Jaime Casanova, Peter Eisentraut, Stephen Frost, Ibrar Ahmed
This function is like the PQserverVersion() function except
it returns the version of libpq, making it possible for a client
program or driver to determine which version of libpq is in
use at runtime, and not just at link time.
Suggested by Harald Armin Massa and several others.
libpq connection, per report from Magnus. This happens only on GIT
master and only on Win32 because that is the platform where "" maps to
an IP address (localhost).
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
supplied, also print the IP address. This allows IPv4 and IPv6 failures
to be distinguished. Also useful when a hostname resolves to multiple
IP addresses.
Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
I just noticed that libpq's pqsignal.h was violating our general inclusion
style guidelines by explicitly including postgres_fe.h. Remove that, and
put it in pqsignal.c where it belongs.
This adds a libpq connection parameter requirepeer that specifies the user
name that the server process is expected to run under.
reviewed by KaiGai Kohei
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
additional cases correctly. The original coding failed to load additional
(chain) certificates from the client cert file, meaning that indirectly signed
client certificates didn't work unless one hacked the server's root.crt file
to include intermediate CAs (not the desired approach). Another problem was
that everything got loaded into the shared SSL_context object, which meant
that concurrent connections trying to use different sslcert settings could
well fail due to conflicting over the single available slot for a keyed
certificate.
To fix, get rid of the use of SSL_CTX_set_client_cert_cb(), which is
deprecated anyway in the OpenSSL documentation, and instead just
unconditionally load the client cert and private key during connection
initialization. This lets us use SSL_CTX_use_certificate_chain_file(),
which does the right thing with additional certs, and is lots simpler than
the previous hacking about with BIO-level access. A small disadvantage is
that we have to load the primary client cert a second time with
SSL_use_certificate_file, so that that one ends up in the correct slot
within the connection's SSL object where it can get paired with the key.
Given the other overhead of making an SSL connection, that doesn't seem
worth worrying about.
Per discussion ensuing from bug #5468.
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
If expand_dbname is non-zero and dbname contains an = sign, it is taken as
a conninfo string in exactly the same way as if it had been passed to
PQconnectdb. This is equivalent to the way PQsetdbLogin() works, allowing
PQconnectdbParams() to be a complete alternative.
Also improve the way the new function is called from psql and replace a
previously missed call to PQsetdbLogin() in psql. Additionally use
PQconnectdbParams() for pg_dump and friends, and the bin/scripts
command line utilities such as vacuumdb, createdb, etc.
Finally, update the documentation for the new parameter, as well as the
nuances of precedence in cases where key words are repeated or duplicated
in the conninfo string.
PQconnectStartParams. These are analogous to PQconnectdb and PQconnectStart
respectively. They differ from the legacy functions in that they accept
two NULL-terminated arrays, keywords and values, rather than conninfo
strings. This avoids the need to build the conninfo string in cases
where it might be inconvenient to do so. Includes documentation.
Also modify psql to utilize PQconnectdbParams rather than PQsetdbLogin.
This allows the new config parameter application_name to be set, which
in turn is displayed in the pg_stat_activity view and included in CSV
log entries. This will also ensure both new functions get regularly
exercised.
Patch by Guillaume Lelarge with review and minor adjustments by
Joe Conway.
PQescapeLiteral is similar to PQescapeStringConn, but it relieves the
caller of the need to know how large the output buffer should be, and
it provides the appropriate quoting (in addition to escaping special
characers within the string). PQescapeIdentifier provides similar
functionality for escaping identifiers.
Per recent discussion with Tom Lane.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
is made, include it in the startup-packet options. This makes it work more
like every other libpq connection option, in particular it now has the same
response to RESET ALL as the rest. This also saves one network round trip
for new applications using application_name. The cost is that if the server
is pre-8.5, it'll reject the startup packet altogether, forcing us to retry
the entire connection cycle. But on balance we shouldn't be optimizing that
case in preference to the behavior with a new server, especially when doing
so creates visible behavioral oddities. Per discussion.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
sockopt(SO_NOSIGPIPE) or the MSG_NOSIGNAL flag to send().
We assume these features are available if (1) the symbol is defined at
compile time and (2) the kernel doesn't reject the call at runtime.
It might turn out that there are some platforms where (1) and (2) are
true and yet the signal isn't really blocked, in which case applications
would die on server crash. If that sort of thing gets reported, then
we'll have to add additional defenses of some kind.
Jeremy Kerr
"verify-ca" and "verify-full".
Since "prefer" remains the default, this will make certificate validation
off by default, which should lead to less upgrade issues.
to the documented API value. The previous code got it right as
it's implemented, but accepted too much/too little compared to
the API documentation.
Per comment from Zdenek Kotala.
now always use the system username as the default, and not try to pick it up
from the kerberos ticket.
This fixes the spurious error messages that show up on kerberos-enabled builds
when not actually using kerberos, and puts it in line with how other authentication
methods work.
empty query string is passed to PQexecParams and related functions. Its
handling of the NoData response to Describe messages was subtly incorrect.
Per my report of yesterday.
Although I consider this a bug, it's a behavioral change that might affect
applications, so not back-patched.
In passing fix a second issue in the same code: it didn't react well to an
out-of-memory failure while trying to make the PGresult object.
and certificate revokation list by using connection parameters or environment
variables.
Original patch by Mark Woodward, heavily reworked by Alvaro Herrera and
Magnus Hagander.
it's connection. This is required for applications that unload
the libpq library (such as PHP) in which case we'd otherwise
have pointers to these functions when they no longer exist.
This needs a bit more testing before we can consider a backpatch,
so not doing that yet.
In passing, remove unused functions in backend/libpq.
Bruce Momjian and Magnus Hagander, per report and analysis
by Russell Smith.
the * character at the beginning of a pattern, and it does not match
subdomains.
Since this means we no longer need fnmatch, remove the imported implementation
from port, along with the autoconf check for it.
results (ie, an empty "broken" buffer) if memory overrun occurs anywhere
along the way to filling the buffer. The previous coding would just silently
discard portions of the intended buffer contents, as exhibited in trouble
report from Sam Mason. Also, tweak psql's main loop to correctly detect
and report such overruns. There's probably much more that should be done
in this line, but this is a start.
libpq. As noted by Peter, adding this variable created a risk of unexpected
connection failures when talking to older server versions, and since it
doesn't do anything you can't do with PGOPTIONS, it doesn't seem really
necessary. Removing it does occasion a few extra lines in pg_regress.c,
but saving a getenv() call per libpq connection attempt is perhaps worth
that anyway.
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
after each other (since we already add a newline on each, this makes them
multiline).
Previously a new error would just overwrite the old one, so for example any
error caused when trying to connect with SSL enabled would be overwritten
by the error message form the non-SSL connection when using sslmode=prefer.
that presence of the password in the conninfo string must be checked *before*
risking a connection attempt, there is no point in checking it afterwards.
This makes the specification of PQconnectionUsedPassword() a bit simpler
and perhaps more generally useful, too.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
sequence of operations that libpq goes through while creating a PGresult.
Also, remove ill-considered "const" decoration on parameters passed to
event procedures.
guarantees about whether event procedures will receive DESTROY events.
They no longer need to defend themselves against getting a DESTROY
without a successful prior CREATE.
Andrew Chernow
Per Microsoft knowledge base article Q201213, early versions of
Windows fail when we do this. Later versions of Windows appear
to have a higher limit than 64Kb, but do still fail on large
sends, so we unconditionally limit it for all versions.
Patch from Tom Lane.
we are on a 64-bit machine (ie, size_t is wider than int) and someone passes
in a query string that approaches or exceeds INT_MAX bytes. Also, just for
paranoia's sake, guard against similar overflows in sizing the input buffer.
The backend will not in the foreseeable future be prepared to send or receive
strings exceeding 1GB, so I didn't take the more invasive step of switching
all the buffer index variables from int to size_t; though someday we might
want to do that.
I have a suspicion that this is not the only such bug in libpq, but this
fix is enough to take care of the crash reported by Francisco Reyes.
Windows, for better performance.
Per suggestion from Andrew Chernow, but not his patch since the underlying
code was changed to deal with return values.
should always succeed, but in the likely event of a failure we would
previously fall through *without locking* - the new code will exit(1).
Printing the error message on stderr will not work for all applications, but
it's better than nothing at all - and our API doesn't provide a way to return
the error to the caller.
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
that is shipped in the distribution, named libpq-dist.rc. This way the
build system doesn't get upset when a distributed file is forcibly
overwritten by during a normal build.
verify_peer_name_matches_certificate(), clarify some of the function's
variables and logic, and update a comment. This should make SSL
improvements easier in the future.
work with the PQExpBuffer code instead of fighting it. This avoids an
unnecessary limit on message length and fixes the latent bug that
errorMessage.len wasn't getting set.
the patch for those features put its cleanup code into freePGconn() which is
really the wrong place. Remove redundant code from freePGconn() and add
comments in hopes of preventing similar mistakes in future.
Noticed while trying (futilely) to reproduce bug #3902.
are known to write on the socket sometimes and thus we are vulnerable to
being killed by the signal if the server happens to go away unexpectedly.
Noticed while trying (futilely) to reproduce bug #3902.
This bug has been there all along, but since the situation is usually
only of interest to developers, I chose not to back-patch the changes.
main code path for enlarging libpq's input buffer in one swoop when needing to
read a long data message. Without this, the code will double the buffer size,
read more data, notice it still hasn't got the whole message, and repeat till
it finally has a large enough buffer. Which wastes a lot of data-moving
effort and also memory (since malloc probably can't do anything very useful
with the freed-up smaller buffers). Not sure why this wasn't there already;
certainly the COPY data path is a place where we're quite likely to see long
data messages. I'm not backpatching though, since this is just a marginal
performance issue rather than a real bug.
ParameterStatus message can be sent during COPY OUT: it's definitely
possible, since COPY from a SELECT subquery can trigger any user-defined
function.
we need to be able to swallow NOTICE messages, and potentially also
ParameterStatus messages (although the latter would be a bit weird),
without exiting COPY OUT state. Fix it, and adjust the protocol documentation
to emphasize the need for this. Per off-list report from Alexander Galler.
PQconnectionNeedsPassword function that tells the right thing for whether to
prompt for a password, and improve PQconnectionUsedPassword so that it checks
whether the password used by the connection was actually supplied as a
connection argument, instead of coming from environment or a password file.
Per bug report from Mark Cave-Ayland and subsequent discussion.
renumbering of encoding IDs done between 8.2 and 8.3 turns out to break 8.2
initdb and psql if they are run with an 8.3beta1 libpq.so. For the moment
we can rearrange the order of enum pg_enc to keep the same number for
everything except PG_JOHAB, which isn't a problem since there are no direct
references to it in the 8.2 programs anyway. (This does force initdb
unfortunately.)
Going forward, we want to fix things so that encoding IDs can be changed
without an ABI break, and this commit includes the changes needed to allow
libpq's encoding IDs to be treated as fully independent of the backend's.
The main issue is that libpq clients should not include pg_wchar.h or
otherwise assume they know the specific values of libpq's encoding IDs,
since they might encounter version skew between pg_wchar.h and the libpq.so
they are using. To fix, have libpq officially export functions needed for
encoding name<=>ID conversion and validity checking; it was doing this
anyway unofficially.
It's still the case that we can't renumber backend encoding IDs until the
next bump in libpq's major version number, since doing so will break the
8.2-era client programs. However the code is now prepared to avoid this
type of problem in future.
Note that initdb is no longer a libpq client: we just pull in the two
source files we need directly. The patch also fixes a few places that
were being sloppy about checking for an unrecognized encoding name.
trying BIO functions.
Helps problem with older versions of OpenSSL that lacks error
stack functions and would show an incorrect error message for
file-not-found-or-not-openable. The problem may still exist for
other errors, but file open error is by far the most common one.
OpenSSL libraries --- just don't call them if they're not there. This
might possibly lead to misleading error messages, but we'll just have
to live with that.
This fixes potential crashes on old versions of OpenSSL and the requirement on
"Applink" in new versions when building with MSVC and using different
runtimes.
Dave Page with fixes from me.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
PGconn. Invent a new libpq connection-status function,
PQconnectionUsedPassword() that returns true if the server
demanded a password during authentication, false otherwise.
This may be useful to clients in general, but is immediately
useful to help plug a privilege escalation path in dblink.
Per list discussion and design proposed by Tom Lane.
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
where possible, and fix some sites that apparently thought that fgets()
will overwrite the buffer by one byte.
Also add some strlcpy() to eliminate some weird memory handling.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
suffix, to distinguish them from doubles. Make some function declarations
and definitions use the "const" qualifier for arguments consistently.
Ignore warning 4102 ("unreferenced label"), because such warnings
are always emitted by bison-generated code. Patch from Magnus Hagander.
FormatMessage() (This should have been in 8.2.0, patched to 8.2.X and
HEAD):
I think this problem to be complex....
http://archives.postgresql.org/pgsql-hackers/2006-11/msg00042.php
FormatMessage of windows cannot consider the encoding of the database.
However, I should try the solution now. It is necessary to clear the
problem.
Multi character-code exists together in message and log. It doesn't
consider
the data base encoding that the user intended....
The user in multi-byte country can try this.
http://inet.winpg.jp/~saito/pg_bug/MessageCheck.c
That is, it is likely to become it in this manner.(Japanese)
http://inet.winpg.jp/~saito/pg_bug/FormatMessage998.png
Hiroshi Saito
Negotiation failure is only likely to happen if one side or the other is
misconfigured, eg. bad client certificate. I'm not 100% convinced that
a retry is really the best thing, hence not back-patching this fix for now.
Per gripe from Sergio Cinos.
which turns out to be a dominant part of the runtime in scenarios
involving lots of parse-time warnings (such as Stephen Frost's example
of an INSERT with a lot of backslash-containing strings). There's not
a whole lot we can do about the character-at-a-time scanning, but we
can at least avoid traversing the query twice.
return true for exactly the characters treated as whitespace by their flex
scanners. Per report from Victor Snezhko and subsequent investigation.
Also fix a passel of unsafe usages of <ctype.h> functions, that is, ye olde
char-vs-unsigned-char issue. I won't miss <ctype.h> when we are finally
able to stop using it.
"DESCRIPTION", which is actually only allowed for device drivers. The
compilers ignore it with a warning - if we remove them, we get rid of
the warning.
Magnus Hagander
fe-auth.c:573: warning: passing argument 1 of 'free' discards qualifiers
from pointer target type
pg_krb5_authname used to return a (const char *) to memory allocated by
krb. Somewhere along the lines this was changed so that a copy was
made, returned, and freed instead. However the const modifier was never
removed.
libpq/md5.h, so that there's a clear separation between backend-only
definitions and shared frontend/backend definitions. (Turns out this
is reversing a bad decision from some years ago...) Fix up references
to crypt.h as needed. I looked into moving the code into src/port, but
the headers in src/include/libpq are sufficiently intertwined that it
seems more work than it's worth to do that.
the lower-level large object functions fails, it will have already set
a suitable error message --- probably something from the backend ---
and it is not useful to overwrite that with a generic 'error while
reading large object' message. So remove redundant messages.
o remove many WIN32_CLIENT_ONLY defines
o add WIN32_ONLY_COMPILER define
o add 3rd argument to open() for portability
o add include/port/win32_msvc directory for
system includes
Magnus Hagander
and standard_conforming_strings; likewise for the other client programs
that need it. As per previous discussion, a pg_dump dump now conforms
to the standard_conforming_strings setting of the source database.
We don't use E'' syntax in the dump, thereby improving portability of
the SQL. I added a SET escape_strings_warning = off command to keep
the dumps from getting a lot of back-chatter from that.
Per Coverity bug #304. Thanks to Martijn van Oosterhout for reporting it.
Zero out the pointer fields of PGresult so that these mistakes are more
easily catched, per discussion.
and standard_conforming_strings. The encoding changes are needed for proper
escaping in multibyte encodings, as per the SQL-injection vulnerabilities
noted in CVE-2006-2313 and CVE-2006-2314. Concurrent fixes are being applied
to the server to ensure that it rejects queries that may have been corrupted
by attempted SQL injection, but this merely guarantees that unpatched clients
will fail rather than allow injection. An actual fix requires changing the
client-side code. While at it we have also fixed these routines to understand
about standard_conforming_strings, so that the upcoming changeover to SQL-spec
string syntax can be somewhat transparent to client code.
Since the existing API of PQescapeString and PQescapeBytea provides no way to
inform them which settings are in use, these functions are now deprecated in
favor of new functions PQescapeStringConn and PQescapeByteaConn. The new
functions take the PGconn to which the string will be sent as an additional
parameter, and look inside the connection structure to determine what to do.
So as to provide some functionality for clients using the old functions,
libpq stores the latest encoding and standard_conforming_strings values
received from the backend in static variables, and the old functions consult
these variables. This will work reliably in clients using only one Postgres
connection at a time, or even multiple connections if they all use the same
encoding and string syntax settings; which should cover many practical
scenarios.
Clients that use homebrew escaping methods, such as PHP's addslashes()
function or even hardwired regexp substitution, will require extra effort
to fix :-(. It is strongly recommended that such code be replaced by use of
PQescapeStringConn/PQescapeByteaConn if at all feasible.
be exported on Linux and Darwin. We already did this on Windows but
that's not enough, as evidenced by the fact that libecpg had an unexpected
dependency on one such symbol. We should try to do it on more platforms.
Fix ecpg's oversight, and bump libpq's major .so version number to reflect
the unwanted but nonetheless real ABI break.
In the SSL code in libpq it does some processing with DH parameters:
SSL_CTX_set_tmp_dh_callback()
This function is marked as server use only[1], the client always uses
the DH parameters in the server, so all the code in the client dealing
with the DH parameters is useless. This patch removes it.
It's not clear why the code was added in the first place, it's been
there almost since the beginning[2]. At the time there was a suggestion
of merging the front-end and backend SSL code, but looking at the
changes since, that seems unlikely.
As a further example, the s_server program allows you to specify DH
params, but s_client doesn't. In the GnuTLS documentation under
gnutls_dh_params_generate2() it says[3]:
Also note that the DH parameters are only useful to servers. Since
clients use the parameters sent by the server, it's of no use to call
this in client side.
# Need to recomple any libpgport object files because we need these
# object files to use the same compile flags as libpq. If we used
# the object files from libpgport, this would not be true on all
# platforms.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
> I've now tested this patch at home w/ 8.2HEAD and it seems to fix the
> bug. I plan on testing it under 8.1.2 at work tommorow with
> mod_auth_krb5, etc, and expect it'll work there. Assuming all goes
> well and unless someone objects I'll forward the patch to -patches.
> It'd be great to have this fixed as it'll allow us to use Kerberos to
> authenticate to phppgadmin and other web-based tools which use
> Postgres.
While playing with this patch under 8.1.2 at home I discovered a
mistake in how I manually applied one of the hunks to fe-auth.c.
Basically, the base code had changed and so the patch needed to be
modified slightly. This is because the code no longer either has a
freeable pointer under 'name' or has 'name' as NULL.
The attached patch correctly frees the string from pg_krb5_authname
(where it had been strdup'd) if and only if pg_krb5_authname returned
a string (as opposed to falling through and having name be set using
name = pw->name;). Also added a comment to this effect.
Backpatch to 8.1.X.
Stephen Frost
a need for it back in the neolithic era, but it's certainly dead code in
any PG release we would recognize as such. Since it forces an additional
network round trip to the backend, getting rid of it should provide some
small performance improvement for large-object-using clients.
option state hasn't been fully set up. This is possible via PQreset()
and might occur in other code paths too, so a state flag seems the
most robust solution. Per report from Arturs Zoldners.
---------------------------------------------------------------------------
> I've now tested this patch at home w/ 8.2HEAD and it seems to fix the
> bug. I plan on testing it under 8.1.2 at work tommorow with
> mod_auth_krb5, etc, and expect it'll work there. Assuming all goes
> well and unless someone objects I'll forward the patch to -patches.
> It'd be great to have this fixed as it'll allow us to use Kerberos to
> authenticate to phppgadmin and other web-based tools which use
> Postgres.
While playing with this patch under 8.1.2 at home I discovered a
mistake in how I manually applied one of the hunks to fe-auth.c.
Basically, the base code had changed and so the patch needed to be
modified slightly. This is because the code no longer either has a
freeable pointer under 'name' or has 'name' as NULL.
The attached patch correctly frees the string from pg_krb5_authname
(where it had been strdup'd) if and only if pg_krb5_authname returned
a string (as opposed to falling through and having name be set using
name = pw->name;). Also added a comment to this effect.
Please review.
Stephen Frost (sfrost@snowman.net) wrote:
> bug. I plan on testing it under 8.1.2 at work tommorow with
> mod_auth_krb5, etc, and expect it'll work there. Assuming all goes
> well and unless someone objects I'll forward the patch to -patches.
> It'd be great to have this fixed as it'll allow us to use Kerberos to
> authenticate to phppgadmin and other web-based tools which use
> Postgres.
While playing with this patch under 8.1.2 at home I discovered a
mistake in how I manually applied one of the hunks to fe-auth.c.
Basically, the base code had changed and so the patch needed to be
modified slightly. This is because the code no longer either has a
freeable pointer under 'name' or has 'name' as NULL.
The attached patch correctly frees the string from pg_krb5_authname
(where it had been strdup'd) if and only if pg_krb5_authname returned
a string (as opposed to falling through and having name be set using
name = pw->name;). Also added a comment to this effect.
Please review.
Stephen Frost (sfrost@snowman.net) wrote:
because pqSendSome will absorb input data anytime it'd be forced to block.
Avoiding a kernel call per PQputCopyData call helps COPY speed materially.
Alon Goldshuv
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
PQregisterThreadLock().
I also remove the crypt() mention in the libpq threading section and
added a single sentence in the client-auth manual page under crypt().
Crypt authentication is so old now that a separate paragraph about it
seemed unwise.
I also added a comment about our use of locking around pqGetpwuid().
to call krb5_sname_to_principal() always. Also, use krb_srvname rather
than the hardwired string 'postgres' as the appl_version string in the
krb5_sendauth/recvauth calls, to avoid breaking compatibility with PG
8.0. Magnus Hagander
Windows. The test itself is bypassed in configure as discussed, and
libpq has been updated appropriately to allow it to build in thread-safe
mode.
Dave Page
malloc() succeeded but the second failed, the buffer allocated by the
first malloc() would be leaked. Fix this by allocating both buffers
via a single malloc(), as suggested by Tom.
Per Coverity static analysis performed by EnterpriseDB.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
syntax for database connection parameters. It has been inside an
#ifdef NOT_USED block since 2001 or so and is marked as "broken", so
I don't think it is likely to be rehabilitated any time soon.
patch adds missing checks to the call sites of malloc(), strdup(),
PQmakeEmptyPGresult(), pqResultAlloc(), and pqResultStrdup(), and updates
the documentation. Per original report from Volkan Yazici about
PQmakeEmptyPGresult() not checking for malloc() failure.
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
Document use of macros for pg_printf functions.
Bump major versions of all interfaces to handle movement of get_progname
from libpq to libpgport in 8.0, and probably other libpgport changes in 8.1.
request packet, use pqReadData(). This has the same effect since
conn->ssl isn't set yet and we aren't expecting more than one byte.
The advantage is that we will correctly detect loss-of-connection
instead of going into an infinite loop. Per report from Hannu Krosing.
discussion on pgsql-hackers-win32 list. Documentation still needs to
be tweaked --- I'm not sure how to refer to the APPDATA folder in
user documentation.
consistent. On Unix we now always consult getpwuid(); $HOME isn't used
at all. On Windows the code currently consults $USERPROFILE, or $HOME
if that's not defined, but I expect this will change as soon as the win32
hackers come to a consensus. Nothing done yet about changing the file
names used underneath $USERPROFILE.
subroutine that can hide platform dependencies. The WIN32 path is still
a stub, but I await a fix from one of the win32 hackers.
Also clean up unnecessary #ifdef WIN32 ugliness in a couple of places.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
its presence. This amounts to desupporting Kerberos 5 releases 1.0.*,
which is small loss, and simplifies use of our Kerberos code on platforms
with Red-Hat-style include file layouts. Per gripe from John Gray and
followup discussion.
lacking pqsignal which is now required. This was found and fixed for
VC++ by Shachar Shemesh, I simply duplicated the fix for the Borland
makefile (untested, as I don't have that compiler).
Dave Page
Use this new function in psql. Implement query cancellation in psql for
Windows. Code by Magnus Hagander, documentation and minor editorialization
by Tom Lane.
