Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
The BAS_VACUUM ring size has been 256kB since commit d526575f introduced
the mechanism 17 years ago. Commit 1cbbee03 recently made it
configurable but retained the traditional default. The correct default
size has been debated for years, but 256kB is certainly very small.
VACUUM soon needs to write back data it dirtied only 32 blocks ago,
which usually requires flushing the WAL. New experiments in prefetching
pages for VACUUM exacerbated the problem by crashing into dirty data
even sooner. Let's make the default 2MB. That's 1.6% of the default
toy buffer pool size, and 0.2% of 1GB, which would be a considered a
small shared_buffers setting for a real system these days. Users are
still free to set the GUC to a different value.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240403221257.md4gfki3z75cdyf6%40awork3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGLY4Q4ZY4f1rvnFtv6%2BPkjNf8MejdPkcju3Qii9DYqqcQ%40mail.gmail.com
The current design behind the automatic generation of the C code and
documentation related to wait events introduced in fa88928470 does not
offer a way to attach new wait events without breaking ABI
compatibility, as all the events are forcibly reordered for each section
in the input file wait_event_names.txt. Adding new wait events to
stable branches is something that has happened in the past, 0b6517a3b7
being a recent example of that with VERSION_FILE_SYNC, so we need a way
to generate any C code for wait events while maintaining compatibility
on stable branches already released.
This commit solves this issue by adding a new region called
"ABI_compatibility" (keyword could be updated to something else if
someone had a better idea) to each section of wait_event_names.txt, so
as one can add new wait events to stable branches in
wait_event_names.txt while keeping the code ABI-compatible.
"ABI_compatibility" has no impact on the documentation generated: all
the wait events of one section are still alphabetically ordered. LWLock
and Lock sections generate their C code elsewhere, so they do not need
an "ABI_compatibility" region.
For example, let's imagine a wait_event_names.txt like that:
Section: ClassName - Foo
FOO_1 "Waiting in Foo 1"
FOO_2 "Waiting in Foo 2"
ABI_compatibility:
NEW_FOO_1 "Waiting in New Foo 1"
NEW_BAR_1 "Waiting in New Bar 1"
This results in the following enum, where the events in the ABI region
are listed last with the same ordering as in wait_event_names.txt:
typedef enum
{
WAIT_EVENT_FOO_1,
WAIT_EVENT_FOO_2,
WAIT_EVENT_NEW_FOO_1,
WAIT_EVENT_NEW_BAR_1
} WaitEventFoo;
New wait events added in stable branches should be added at the end of
each ABI_compatibility region, and ABI_compatibility should remain empty
on HEAD and unreleased stable branches.
This design has been suggested by Noah Misch and me.
Reported-by: Noah Misch
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20240317183114.16@rfd.leadboat.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This would cause the timestamp values used by emit_log_hook and all the
other log destinations to differ, because the timestamps are reset
before sending the logs to the server and after calling the hook.
This change matters for emit_log_hook when generating log information
with 'n' or 'm' in log_line_prefix through log_status_format(), or when
doing direct calls to get_formatted_log_time() like in the JSON or CSV
log formats.
While on it, this commit fixes a couple of comments related to the
formatted timestamps where the JSON was not mentioned. Oversight in
dc686681e0, that I have noticed while reviewing this patch.
Author: Kambam Vinay, Michael Paquier
Discussion: https://postgr.es/m/CANiRfmsK36A0i8mnQtzaxhSm3CUCimPwJPp4WQNq53OdSNkgWg@mail.gmail.com
This adds errcodes to a set of PANIC and FATAL errors in xlog.c
and relcache.c, which previously had no errcode at all set, in
order to make fleetwide analysis of errorlogs easier. There are
many more ereport/elogs left which could benefit from having an
errcode but this at least makes a dent in the issue.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1k8LgLEqncPGmz_fWnrobV6bjABOTH4tOWta6xNcPQig@mail.gmail.com
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
Break ReadBuffer() up into two steps. StartReadBuffers() and
WaitReadBuffers() give us two main advantages:
1. Multiple consecutive blocks can be read with one system call.
2. Advice (hints of future reads) can optionally be issued to the
kernel ahead of time.
The traditional ReadBuffer() function is now implemented in terms of
those functions, to avoid duplication.
A new GUC io_combine_limit is defined, and the functions for limiting
per-backend pin counts are made into public APIs. Those are provided
for use by callers of StartReadBuffers(), when deciding how many buffers
to read at once. The following commit will add a higher level mechanism
for doing that automatically with a practical interface.
With some more infrastructure in later work, StartReadBuffers() could
be extended to start real asynchronous I/O instead of just issuing
advice and leaving WaitReadBuffers() to do the work synchronously.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de> (some optimization tweaks)
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Tested-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Previously, we used a simple array for storing dead tuple IDs during
lazy vacuum, which had a number of problems:
* The array used a single allocation and so was limited to 1GB.
* The allocation was pessimistically sized according to table size.
* Lookup with binary search was slow because of poor CPU cache and
branch prediction behavior.
This commit replaces that array with the TID store from commit
30e144287a.
Since the backing radix tree makes small allocations as needed, the
1GB limit is now gone. Further, the total memory used is now often
smaller by an order of magnitude or more, depending on the
distribution of blocks and offsets. These two features should make
multiple rounds of heap scanning and index cleanup an extremely rare
event. TID lookup during index cleanup is also several times faster,
even more so when index order is correlated with heap tuple order.
Since there is no longer a predictable relationship between the number
of dead tuples vacuumed and the space taken up by their TIDs, the
number of tuples no longer provides any meaningful insights for users,
nor is the maximum number predictable. For that reason this commit
also changes to byte-based progress reporting, with the relevant
columns of pg_stat_progress_vacuum renamed accordingly to
max_dead_tuple_bytes and dead_tuple_bytes.
For parallel vacuum, both the TID store and supplemental information
specific to vacuum are shared among the parallel vacuum workers. As
with the previous array, we don't take any locks on TidStore during
parallel vacuum since writes are still only done by the leader
process.
Bump catalog version.
Reviewed-by: John Naylor, (in an earlier version) Dilip Kumar
Discussion: https://postgr.es/m/CAD21AoAfOZvmfR0j8VmZorZjL7RhTiQdVttNuC4W-Shdc2a-AA%40mail.gmail.com
This SQL-callable function behaves much like our internal utility
function getBaseType(), except it returns NULL rather than failing for
an invalid type OID. (That behavior is modeled on our experience with
other catalog-inquiry functions such as the ACL checking functions.)
The key advantage over doing a join to pg_type is that it will loop
as needed to find the bottom base type of a nest of domains.
Steve Chavez, reviewed by jian he and others
Discussion: https://postgr.es/m/CAGRrpzZSX8j=MQcbCSEisFA=ic=K3bknVfnFjAv1diVJxFHJvg@mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
This brings the titlecasing implementation for the builtin provider
out of formatting.c and into unicode_case.c, along with
unicode_strlower() and unicode_strupper(). Accepts an arbitrary word
boundary callback.
Simple for now, but can be extended to support the Unicode Default
Case Conversion algorithm with full case mapping.
Discussion: https://postgr.es/m/3bc653b5d562ae9e2838b11cb696816c328a489a.camel@j-davis.com
Reviewed-by: Peter Eisentraut
This is marked PGC_SIGHUP, so it can only be set in a configuration
file, not anywhere else; and it is also marked GUC_DISALLOW_IN_AUTO_FILE,
so it can't be set using ALTER SYSTEM. When set to false, the
ALTER SYSTEM command is disallowed.
There was considerable concern that this would be misinterpreted as
a security feature, which it is not, because a determined superuser
has various ways of bypassing it. Hence, a lot of work has gone into
wordsmithing the documentation, in the hopes of avoiding any such
confusion.
Jelte Fennemia-Nio and Gabriele Bartolini, with wording suggestions
for the documentation from many others.
Discussion: http://postgr.es/m/CA%2BVUV5rEKt2%2BCdC_KUaPoihMu%2Bi5ChT4WVNTr4CD5-xXZUfuQw%40mail.gmail.com
The user-facing name is "Other Platforms and Clients", but the
internal name seems too focused on clients specifically, especially
given the plan to add a new setting to this session that is about
platform or deployment model compatibility rather than client
compatibility.
Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAGECzQTfMbDiM6W3av+3weSnHxJvPmuTEcjxVvSt91sQBdOxuQ@mail.gmail.com
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
Previously, the DSA segment size always started with 1MB and grew up
to DSA_MAX_SEGMENT_SIZE. It was inconvenient in certain scenarios,
such as when the caller desired a soft constraint on the total DSA
segment size, limiting it to less than 1MB.
This commit introduces the capability to specify the initial and
maximum DSA segment sizes when creating a DSA area, providing more
flexibility and control over memory usage.
Reviewed-by: John Naylor, Tomas Vondra
Discussion: https://postgr.es/m/CAD21AoAYGGC1ePjVX0H%2Bpp9rH%3D9vuPK19nNOiu12NprdV5TVJA%40mail.gmail.com
When the list of roles gathered by roles_is_member_of() grows very
large, a Bloom filter is created to help avoid some linear searches
through the list. The threshold for creating the Bloom filter is
set arbitrarily high and may require future adjustment.
Suggested-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAGvXd3OSMbJQwOSc-Tq-Ro1CAz%3DvggErdSG7pv2s6vmmTOLJSg%40mail.gmail.com
The musl dynamic linker saves a pointer to the process' environment
value of LD_LIBRARY_PATH very early in startup. When we move/clobber
the environment to make more room for ps status strings, we clobber
that value and thereby prevent libraries from being found via
LD_LIBRARY_PATH, which breaks the use of a temporary installation
for testing purposes. To fix, stop collecting usable space for
ps status if we notice that the variable we are about to clobber
is LD_LIBRARY_PATH. This will result in some reduction in how long
the ps status can be, but it's only likely to occur in temporary
test contexts, so it doesn't seem like a big problem. In any case,
we don't have to do it if we see we are on glibc, which surely is
where the majority of our Linux testing is done.
Thomas Munro, Bruce Momjian, and Tom Lane, per report from Wolfgang
Walther. Back-patch to all supported branches, with the hope that
we'll set up a buildfarm animal to test on this platform.
Discussion: https://postgr.es/m/fddd1cd6-dc16-40a2-9eb5-d7fef2101488@technowledgy.de
It's now possible to specify a table access method via
CREATE TABLE ... USING for a partitioned table, as well change it with
ALTER TABLE ... SET ACCESS METHOD. Specifying an AM for a partitioned
table lets the value be used for all future partitions created under it,
closely mirroring the behavior of the TABLESPACE option for partitioned
tables. Existing partitions are not modified.
For a partitioned table with no AM specified, any new partitions are
created with the default_table_access_method.
Also add ALTER TABLE ... SET ACCESS METHOD DEFAULT, which reverts to the
original state of using the default for new partitions.
The relcache of partitioned tables is not changed: rd_tableam is not
set, even if a partitioned table has a relam set.
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Reviewed-by: The authors themselves
Discussion: https://postgr.es/m/CAE-ML+9zM4wJCGCBGv01k96qQ3gFv4WFcFy=zqPHKeaEFwwv6A@mail.gmail.com
Discussion: https://postgr.es/m/20210308010707.GA29832%40telsasoft.com
Up to now we've rejected cases like
BEGIN;
CREATE TYPE rainbow AS ENUM ();
ALTER TYPE rainbow ADD VALUE 'red';
-- use the value 'red', perhaps in a constraint or index
COMMIT;
The concern is that the uncommitted enum value 'red' might get into
an index and then break the index if we roll back the ALTER ADD.
If the ALTER is in the same transaction as the CREATE then it's really
perfectly safe, but we weren't taking the trouble to identify that.
pg_dump in binary-upgrade mode will emit enum definitions that look
like the above, which up to now didn't fall foul of the unsafe-usage
check because we processed each restore command as a separate
transaction. However an upcoming patch proposes to bundle the restore
commands into large transactions to reduce XID consumption during
pg_upgrade, and that makes this behavior a problem.
To fix, remember the OIDs of enum types created in the current
transaction, and allow use of enum values that are added to one later
in the same transaction. To do this fully correctly in the presence
of subtransactions, we'd have to track subtransaction nesting level of
the CREATE and do maintenance work at every subsequent subtransaction
exit. That seems expensive, and we don't need it to satisfy pg_dump's
usage. Hence, apply the additional optimization only when the CREATE
and ALTER are at outermost transaction level.
Patch by me, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/1548468.1711220438@sss.pgh.pa.us
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Up to now, all of the "catcache list" objects within a catalog cache
were just chained together on a single dlist, requiring O(N) time to
search. Remarkably, we've not had serious performance problems with
that so far; but we got a complaint of a bad performance regression
from v15 in a case with a large number of roles in the system, which
traced down to O(N^2) total time when we probed N catcache lists.
Replace that data structure with a hashtable having an enlargeable
number of dlists, in an exactly parallel way to the data structure
we've used for years for the plain CatCTup cache members. The extra
cost of maintaining a hash table seems negligible, since we were
already computing a hash value for list searches.
Normally this'd be HEAD-only material, but in view of the performance
regression it seems advisable to back-patch into v16. In the v16
version of the patch, leave the dead cc_lists field where it is and
add the new fields at the end of struct catcache, to avoid possible
ABI breakage in case any external code is looking at these structs.
(We assume no external code is actually allocating new catcache
structs.)
Per report from alex work.
Discussion: https://postgr.es/m/CAGvXd3OSMbJQwOSc-Tq-Ro1CAz=vggErdSG7pv2s6vmmTOLJSg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
This allows us to abstract how/whether table AM uses transaction identifiers.
A custom table AM can use a custom slot, which may not store xmin directly,
but determine the tuple belonging to the current transaction in the other way.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
The new table AM method free_rd_amcache is responsible for freeing all the
memory related to rd_amcache and setting free_rd_amcache to NULL. If the new
method is not specified, we still assume rd_amcache to be a single chunk of
memory, which could be just pfree'd.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
In combination with to_regtype, this allows converting a string to
the "canonicalized" form emitted by format_type. That usage requires
parsing the string twice, which is slightly annoying but not really
too expensive. We considered alternatives such as returning a record
type, but that way was notationally uglier than this, and possibly
less flexible.
Like to_regtype(), we'd rather that this return NULL for any bad
input, but the underlying type-parsing logic isn't yet capable of
not throwing syntax errors. Adjust the documentation for both
functions to point that out.
In passing, fix up a couple of nearby entries in the System Catalog
Information Functions table that had not gotten the word about our
since-v13 convention for displaying function usage examples.
David Wheeler and Erik Wienhold, reviewed by Pavel Stehule, Jim Jones,
and others.
Discussion: https://postgr.es/m/DF2324CA-2673-4ABE-B382-26B5770B6AA3@justatheory.com
This commit limits the maximum value of wal_summary_keep_time to
INT_MAX / SECS_PER_MINUTE to avoid overflow when it is converted to
seconds. In passing, use the HOURS_PER_DAY, MINS_PER_HOUR, and
SECS_PER_MINUTE macros in the code for this GUC instead of hard-
coding those values.
Discussion: https://postgr.es/m/20240314210010.GA3056455%40nathanxps13
This way, we can fold the list of lock names to occur in
BuiltinTrancheNames instead of having its own separate array. This
saves two lines of code in GetLWTrancheName and some space in
BuiltinTrancheNames, as foreseen in commit 74a7306310, as well as
removing the need for a separate lwlocknames.c file.
We still have to build lwlocknames.h using Perl code, which initially I
wanted to avoid, but it gives us the chance to cross-check
wait_event_names.txt.
Discussion: https://postgr.es/m/202401231025.gbv4nnte5fmm@alvherre.pgsql
The builtin C.UTF-8 locale has similar semantics to the libc locale of
the same name. That is, code point sort order (fast, memcmp-based)
combined with Unicode semantics for character operations such as
pattern matching, regular expressions, and
LOWER()/INITCAP()/UPPER(). The character semantics are based on
Unicode simple case mappings.
The builtin provider's C.UTF-8 offers several important advantages
over libc:
* faster sorting -- benefits from additional optimizations such as
abbreviated keys and varstrfastcmp_c
* faster case conversion, e.g. LOWER(), at least compared with some
libc implementations
* available on all platforms with identical semantics, and the
semantics are stable, testable, and documentable within a given
Postgres major version
Being based on memcmp, the builtin C.UTF-8 locale does not offer
natural language sort order. But it is an improvement for most use
cases that might otherwise use libc's "C.UTF-8" locale, as well as
many use cases that use libc's "C" locale.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Historically we've printed SubPlan expression nodes as "(SubPlan N)",
which is pretty uninformative. Trying to reproduce the original SQL
for the subquery is still as impractical as before, and would be
mighty verbose as well. However, we can still do better than that.
Displaying the "testexpr" when present, and adding a keyword to
indicate the SubLinkType, goes a long way toward showing what's
really going on.
In addition, this patch gets rid of EXPLAIN's use of "$n" to represent
subplan and initplan output Params. Instead we now print "(SubPlan
N).colX" or "(InitPlan N).colX" to represent the X'th output column
of that subplan. This eliminates confusion with the use of "$n" to
represent PARAM_EXTERN Params, and it's useful for the first part of
this change because it eliminates needing some other indication of
which subplan is referenced by a SubPlan that has a testexpr.
In passing, this adds simple regression test coverage of the
ROWCOMPARE_SUBLINK code paths, which were entirely unburdened
by testing before.
Tom Lane and Dean Rasheed, reviewed by Aleksander Alekseev.
Thanks to Chantal Keller for raising the question of whether
this area couldn't be improved.
Discussion: https://postgr.es/m/2838538.1705692747@sss.pgh.pa.us
Based on comments from Peter Eisentraut.
* Document CREATE DATABASE ... BUILTIN_LOCALE.
* Determine required encoding based on locale name for CREATE
COLLATION. Use -1 for "C" (requires catversion bump).
* initdb output fixups.
* Make ctype_is_c a constant true for now.
* Fixups to ICU 010_create_database.pl test.
Discussion: https://postgr.es/m/4135cf11-206d-40ed-96c0-9363c1232379@eisentraut.org
Introduce new postmaster_child_launch() function that deals with the
differences in EXEC_BACKEND mode.
Refactor the mechanism of passing information from the parent to child
process. Instead of using different command-line arguments when
launching the child process in EXEC_BACKEND mode, pass a
variable-length blob of startup data along with all the global
variables. The contents of that blob depend on the kind of child
process being launched. In !EXEC_BACKEND mode, we use the same blob,
but it's simply inherited from the parent to child process.
Reviewed-by: Tristan Partin, Andres Freund
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
Given a subplan in a MERGE query, EXPLAIN would sometimes fail to
properly display expressions involving Params referencing variables in
other parts of the plan tree.
This would affect subplans outside the topmost join plan node, for
which expansion of Params would go via the top-level ModifyTable plan
node. The problem was that "inner_tlist" for the ModifyTable node's
deparse_namespace was set to the join node's targetlist, but
"inner_plan" was set to the ModifyTable node itself, rather than the
join node, leading to incorrect results when descending to the
referenced variable.
Fix and backpatch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWAv-sZuH%2BwG5xJ-%2BGt7qGNGX8wUQd3XYydMFDKgRB9nw%40mail.gmail.com
This introduces a new function equalRowTypes() that is effectively a
subset of equalTupleDescs() but only compares the number of attributes
and attribute name, type, typmod, and collation. This is enough for
most existing uses of equalTupleDescs(), which are changed to use the
new function. The only remaining callers of equalTupleDescs() are
those that really want to check the full tuple descriptor as such,
without concern about record or row or record type semantics.
The existing function hashTupleDesc() is renamed to hashRowType(),
because it now corresponds more to equalRowTypes().
The purpose of this change is to be clearer about the semantics of the
equality asked for by each caller. (At least one caller had a comment
that questioned whether equalTupleDescs() was too restrictive.) For
example, 4f622503d6 removed attstattarget from the tuple descriptor
structure. It was not fully clear at the time how this should affect
equalTupleDescs(). Now the answer is clear: By their own definitions,
equalRowTypes() does not care, and equalTupleDescs() just compares
whatever is in the tuple descriptor but does not care why it is in
there.
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/f656d6d9-6660-4518-a006-2f65cafbebd1%40eisentraut.org
destroyStringInfo() is a counterpart to makeStringInfo(), freeing a
palloc'd StringInfo and its data. This is a convenience function to
align the StringInfo API with the PQExpBuffer API. Originally added
in the OAuth patchset, it was extracted and committed separately in
order to aid upcoming JSON work.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi+mWdTd6ujtyF7MsvXvk7ToLRVG_tYAcaGbQLvf=N4KrQw@mail.gmail.com
The same pattern is used three times in dynahash.c to retrieve a bucket
number and a hash bucket from a hash value. This has popped up while
discussing improvements for the type cache, where this piece of
refactoring would become useful.
Note that hash_search_with_hash_value() does not need the bucket number,
just the hash bucket.
Author: Teodor Sigaev
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/5812a6e5-68ae-4d84-9d85-b443176966a1@sigaev.ru
This function returns the chunk_id of an on-disk TOASTed value. If
the value is un-TOASTed or not on-disk, it returns NULL. This is
useful for identifying which values are actually TOASTed and for
investigating "unexpected chunk number" errors.
Bumps catversion.
Author: Yugo Nagata
Reviewed-by: Jian He
Discussion: https://postgr.es/m/20230329105507.d764497456eeac1ca491b5bd%40sraoss.co.jp
Peter Geoghegan
Thomas Munro
Michael Paquier
Amit Langote
Daniel Gustafsson
Alexander Korotkov
Masahiko Sawada
Tom Lane
Dean Rasheed
Jeff Davis
Robert Haas
Nathan Bossart
Bruce Momjian
Alvaro Herrera
Peter Eisentraut
Heikki Linnakangas