insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
before we check commit/abort status. Formerly this was done in some paths
but not all, with the result that a transaction might be considered
committed for some purposes before it became committed for others.
Per example found by Jan Wieck.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
difference between INSERT_IN_PROGRESS and DELETE_IN_PROGRESS for
tuples inserted and then deleted by a concurrent transaction.
Example of bug:
regression=# create table foo (f1 int);
CREATE TABLE
regression=# begin;
BEGIN
regression=# insert into foo values(1);
INSERT 195531 1
regression=# delete from foo;
DELETE 1
regression=# insert into foo values(1);
INSERT 195532 1
regression=# create unique index fooi on foo(f1);
ERROR: could not create unique index
DETAIL: Table contains duplicated values.
>> actually having updated the tuple, [...] can we simply
>> set the HEAP_XMAX_INVALID hint bit of the tuple?
>
>AFAICS this is a reasonable thing to do.
Thanks for the confirmation. Here's a patch which also contains some
more noncritical changes to tqual.c:
. make code more readable by introducing local variables for xvac
. no longer two separate branches for aborted and crashed.
The actions were the same in all cases.
Manfred Koizar
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
into postgres.c; make sure it happens for all cases that seem to need it.
Perhaps it would be better to explicitly exclude just a few utility
statement types from setting a snapshot?
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
tuple header. The fix is based on the thought that HEAP_MOVED_IN is
not needed any more as soon as HEAP_XMIN_COMMITTED has been set. So
in tqual.c and vacuum.c the HEAP_MOVED bits are cleared when
HEAP_XMIN_COMMITTED is set.
Vacuum robustness is enhanced by rearranging ifs, so that we have a
chance to elog(ERROR, ...) before an assertion fails.
A new regression test is included.
Manfred Koizar
HeapTupleHeaderData in setter and getter macros called
HeapTupleHeaderGetXmin, HeapTupleHeaderSetXmin etc.
It also introduces a "virtual" field xvac by defining
HeapTupleHeaderGetXvac and HeapTupleHeaderSetXvac. Xvac is used by
VACUUM, in fact it is stored in t_cmin.
Manfred Koizar
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
mess up after an aborted VACUUM FULL, per today's pghackers discussion.
Add a suitable HeapTupleSatisfiesToast routine. Remove useless special-
case test in HeapTupleSatisfiesVisibility macro for xmax =
BootstrapTransactionId; perhaps that was needed at one time, but it's
a waste of cycles now, not to mention actively wrong for SnapshotAny.
Along the way, add some much-needed comments to tqual.c, and simplify
toast_fetch_datum, which no longer needs to assume it may see chunks
out-of-order.
as either HEAP_XMAX_COMMITTED or HEAP_XMAX_INVALID once the updating
transaction is gone. Otherwise some other transaction may come along
and try to test the commit status of t_xmax later --- which could be
after VACUUM has recycled the CLOG status for that xact. Bug introduced
in post-beta4 bug fix.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
2. Much faster btree tuples deletion in the case when first on page
index tuple is deleted (no movement to the left page(s)).
3. Remember blkno of new root page in BTPageOpaque of
left/right siblings when root page is splitted.
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
Reply-To: hackers@hub.org, Dan McGuirk <mcguirk@indirect.com>
To: hackers@hub.org
Subject: [HACKERS] tmin writeback optimization
I was doing some profiling of the backend, and noticed that during a certain
benchmark I was running somewhere between 30% and 75% of the backend's CPU
time was being spent in calls to TransactionIdDidCommit() from
HeapTupleSatisfiesNow() or HeapTupleSatisfiesItself() to determine that
changed rows' transactions had in fact been committed even though the rows'
tmin values had not yet been set.
When a query looks at a given row, it needs to figure out whether the
transaction that changed the row has been committed and hence it should pay
attention to the row, or whether on the other hand the transaction is still
in progress or has been aborted and hence the row should be ignored. If
a tmin value is set, it is known definitively that the row's transaction
has been committed. However, if tmin is not set, the transaction
referred to in xmin must be looked up in pg_log, and this is what the
backend was spending a lot of time doing during my benchmark.
So, implementing a method suggested by Vadim, I created the following
patch that, the first time a query finds a committed row whose tmin value
is not set, sets it, and marks the buffer where the row is stored as
dirty. (It works for tmax, too.) This doesn't result in the boost in
real time performance I was hoping for, however it does decrease backend
CPU usage by up to two-thirds in certain situations, so it could be
rather beneficial in high-concurrency settings.