Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
To allow the use of the read stream API added in b5a9b18cd for
sequential scans on heap tables, here we make some adjustments to make
that change less invasive and perhaps make the code easier to follow in
the process.
Here heapgetpage() gets broken into two functions:
1) The part which reads the block has now been moved into a function
named heapfetchbuf().
2) The part which performed pruning and populated the scan's
rs_vistuples[] array is now moved into a new function named
heap_prepare_pagescan().
The functionality provided by heap_prepare_pagescan() was only ever
required by SO_ALLOW_PAGEMODE scans, so the branching that was
previously done in heapgetpage() is no longer needed as we simply just
don't call heap_prepare_pagescan() from heapgettup() in the refactored
code.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_YtXJiYKQvb5JsA2SkwrsizYLugs4sSOZh3EAjKUg=gEQ@mail.gmail.com
Execute both freezing and pruning of tuples in the same
heap_page_prune() function, now called heap_page_prune_and_freeze(),
and emit a single WAL record containing all changes. That reduces the
overall amount of WAL generated.
This moves the freezing logic from vacuumlazy.c to the
heap_page_prune_and_freeze() function. The main difference in the
coding is that in vacuumlazy.c, we looked at the tuples after the
pruning had already happened, but in heap_page_prune_and_freeze() we
operate on the tuples before pruning. The heap_prepare_freeze_tuple()
function is now invoked after we have determined that a tuple is not
going to be pruned away.
VACUUM no longer needs to loop through the items on the page after
pruning. heap_page_prune_and_freeze() does all the work. It now
returns the list of dead offsets, including existing LP_DEAD items, to
the caller. Similarly it's now responsible for tracking 'all_visible',
'all_frozen', and 'hastup' on the caller's behalf.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/20240330055710.kqg6ii2cdojsxgje@liskov
Currently there is only one option, HEAP_PAGE_PRUNE_MARK_UNUSED_NOW
which replaces the old boolean argument, but upcoming patches will
introduce at least one more. Having a lot of boolean arguments makes
it hard to see at the call sites what the arguments mean, so prefer a
bitmask of options with human-readable names.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Discussion: https://www.postgresql.org/message-id/20240401172219.fngjosaqdgqqvg4e@liskov
Previously, the executor did index insert unconditionally after calling
table AM interface methods tuple_insert() and multi_insert(). This commit
introduces the new parameter insert_indexes for these two methods. Setting
'*insert_indexes' to true saves the current logic. Setting it to false
indicates that table AM cares about index inserts itself and doesn't want the
caller to do that.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent, Mark Dilger
Currently, there is just one algorithm for sampling tuples from a table written
in acquire_sample_rows(). Custom table AM can just redefine the way to get the
next block/tuple by implementing scan_analyze_next_block() and
scan_analyze_next_tuple() API functions.
This approach doesn't seem general enough. For instance, it's unclear how to
sample this way index-organized tables. This commit allows table AM to
encapsulate the whole sampling algorithm (currently implemented in
acquire_sample_rows()) into the relation_analyze() API function.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Pavel Borisov, Matthias van de Meent
Previously, the behavior of TidStoreCreate() was inconsistent between
local and shared TidStore instances in terms of memory limitation. For
local TidStore, a memory context was created with initial and maximum
memory block sizes, as well as a minimum memory context size, based on
the specified max_bytes values. However, for shared TidStore, the
provided DSA area was used for TID storage. Although commit bb952c8c8b
allowed specifying the initial and maximum DSA segment sizes, callers
would have needed to clamp their own limits, which was not consistent
and user-friendly.
With this commit, when creating a shared TidStore, a dedicated DSA
area is created for TID storage instead of using a provided DSA
area. The initial and maximum DSA segment sizes are chosen based on
the specified max_bytes. Other processes can attach to the shared
TidStore using the handle of the created DSA returned by the new
TidStoreGetDSA() function and the DSA pointer returned by
TidStoreGetHandle(). The created DSA has the same lifetime as the
shared TidStore and is deleted when all processes detach from it.
To improve clarity, the TidStoreCreate() function has been divided
into two separate functions: TidStoreCreateLocal() and
TidStoreCreateShared().
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAD21AoAyc1j%3DBCdUqZfk6qbdjZ68UgRx1Gkpk0oah4K7S0Ri9g%40mail.gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by the concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This commit eliminates step 2 by taking the lock during the first
tuple_update()/tuple_delete() call. The heap table access method saves some
effort by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
Also, this commit makes tuple_update()/tuple_delete() optionally save the old
tuple into the dedicated slot. That saves efforts on re-fetching tuples in
certain cases.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
The new combined WAL record is now used for pruning, freezing and 2nd
pass of vacuum. This is in preparation for changing VACUUM to write a
combined prune+freeze record per page, instead of separate two
records. The new WAL record format now supports that, but the code
still always writes separate records for pruning and freezing.
This reserves separate XLOG_HEAP2_* info codes for when the pruning
record is emitted for on-access pruning or VACUUM, per Peter
Geoghegan's suggestion. The record format is identical, but having
separate info codes makes it easier analyze pruning and vacuuming with
pg_waldump.
The function to emit the new WAL record, log_heap_prune_and_freeze(),
is in pruneheap.c. The existing heap_log_freeze_plan() and its
subroutines are moved to pruneheap.c without changes, to keep them
together with log_heap_prune_and_freeze().
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAAKRu_azf-zH%3DDgVbquZ3tFWjMY1w5pO8m-TXJaMdri8z3933g@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAAKRu_b2oE4GL%3Dq4g9mcByS9yT7wTQvEH9OLpabj28e%2BWKFi2A@mail.gmail.com
This allows table AM to return a native tuple slot even if
VirtualTupleTableSlot is given as an input. Native tuple slots have knowledge
about system attributes, which could be accessed in the future.
table_multi_insert() method already can modify the input 'slots' array.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
The new table AM method free_rd_amcache is responsible for freeing all the
memory related to rd_amcache and setting free_rd_amcache to NULL. If the new
method is not specified, we still assume rd_amcache to be a single chunk of
memory, which could be just pfree'd.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
TIDStore is a data structure designed to efficiently store large sets
of TIDs. For TID storage, it employs a radix tree, where the key is
a block number, and the value is a bitmap representing offset
numbers. The TIDStore can be created on a DSA area and used by
multiple backend processes simultaneously.
There are potential future users such as tidbitmap.c, though it's very
likely the interface will need to evolve as we come to understand the
needs of different kinds of users. For example, we can support
updating the offset bitmap of existing values.
Currently, the TIDStore is not used for anything yet, aside from the
test code. But an upcoming patch will use it.
This includes a unit test module, in src/test/modules/test_tidstore.
Co-authored-by: John Naylor
Discussion: https://postgr.es/m/CAD21AoAfOZvmfR0j8VmZorZjL7RhTiQdVttNuC4W-Shdc2a-AA%40mail.gmail.com
This introduces a new function equalRowTypes() that is effectively a
subset of equalTupleDescs() but only compares the number of attributes
and attribute name, type, typmod, and collation. This is enough for
most existing uses of equalTupleDescs(), which are changed to use the
new function. The only remaining callers of equalTupleDescs() are
those that really want to check the full tuple descriptor as such,
without concern about record or row or record type semantics.
The existing function hashTupleDesc() is renamed to hashRowType(),
because it now corresponds more to equalRowTypes().
The purpose of this change is to be clearer about the semantics of the
equality asked for by each caller. (At least one caller had a comment
that questioned whether equalTupleDescs() was too restrictive.) For
example, 4f622503d6 removed attstattarget from the tuple descriptor
structure. It was not fully clear at the time how this should affect
equalTupleDescs(). Now the answer is clear: By their own definitions,
equalRowTypes() does not care, and equalTupleDescs() just compares
whatever is in the tuple descriptor but does not care why it is in
there.
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/f656d6d9-6660-4518-a006-2f65cafbebd1%40eisentraut.org
The parallel query infrastructure copies the leader backend's active
snapshot to the worker processes. But BitmapHeapScan node also had
bespoken code to pass the snapshot from leader to the worker. That was
redundant, so remove it.
The removed code was analogous to the snapshot serialization in
table_parallelscan_initialize(), but that was the wrong role model. A
parallel bitmap heap scan is more like an independent non-parallel
bitmap heap scan in each parallel worker as far as the table AM is
concerned, because the coordination is done in nodeBitmapHeapscan.c,
and the table AM doesn't need to know anything about it.
This relies on the assumption that es_snapshot ==
GetActiveSnapshot(). That's not a new assumption, things would get
weird if you used the QueryDesc's snapshot for visibility checks in
the scans, but the active snapshot for evaluating quals, for
example. This could use some refactoring and cleanup, but for now,
just add some assertions.
Reviewed-by: Dilip Kumar, Robert Haas
Discussion: https://www.postgresql.org/message-id/5f3b9d59-0f43-419d-80ca-6d04c07cf61a@iki.fi
The pid was originally used in error context of messages propagated
from parallel workers, but commit 292794f82b removed that. If the need
arises in the future, you can also get the pid with
"shm_mq_get_sender(pcxt->worker[i].error_mqh)->pid".
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
Similarly to tables and indexes, these functions are able to open
relations with a sequence relkind, which is useful to make a distinction
with the other relation kinds. Previously, commands/sequence.c used a
mix of table_{close,open}() and relation_{close,open}() routines when
manipulating sequence relations, so this clarifies the code.
A direct effect of this change is to align the error messages produced
when attempting DDLs for sequences on relations with an unexpected
relkind, like a table or an index with ALTER SEQUENCE, providing an
extra error detail about the relkind of the relation used in the DDL
query.
Author: Michael Paquier
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/ZWlohtKAs0uVVpZ3@paquier.xyz
Commit 6b80394781 introduced integer comparison functions designed
to be as efficient as possible while avoiding overflow. This
commit makes use of these functions in many of the in-tree qsort()
comparators to help ensure transitivity. Many of these comparator
functions should also see a small performance boost.
Author: Mats Kindahl
Reviewed-by: Andres Freund, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CA%2B14426g2Wa9QuUpmakwPxXFWG_1FaY0AsApkvcTBy-YfS6uaw%40mail.gmail.com
If available, read directly from WAL buffers, avoiding the need to go
through the filesystem. Only for physical replication for now, but can
be expanded to other callers.
In preparation for replicating unflushed WAL data.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXKKK%3DwbiG5_t6dGao5GoecMwRkhr7GjVBM_jg54%2BNa%3DQ%40mail.gmail.com
Reviewed-by: Andres Freund, Alvaro Herrera, Nathan Bossart, Dilip Kumar, Nitin Jadhav, Melih Mutlu, Kyotaro Horiguchi
The new concurrency model proposed for slru.c to improve performance
does not include any single lock that would coordinate processes
doing concurrent reads/writes on SlruShared->latest_page_number.
We can instead use atomic reads and writes for that variable.
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
If there are no indexes on a relation, items can be marked LP_UNUSED
instead of LP_DEAD when pruning. This significantly reduces WAL
volume, since we no longer need to emit one WAL record for pruning
and a second to change the LP_DEAD line pointers thus created to
LP_UNUSED.
Melanie Plageman, reviewed by Andres Freund, Peter Geoghegan, and me
Discussion: https://postgr.es/m/CAAKRu_bgvb_k0gKOXWzNKWHt560R0smrGe3E8zewKPs8fiMKkw%40mail.gmail.com
try_index_open() is able to open an index if its relkind fits, except
that it would return NULL instead of generated an error if the relation
does not exist. This new routine will be used by an upcoming patch to
make REINDEX on partitioned relations more robust when an index in a
partition tree is dropped.
Extracted from a larger patch by the same author.
Author: Fei Changhong
Discussion: https://postgr.es/m/tencent_6A52106095ACDE55333E3AD33F304C0C3909@qq.com
Backpatch-through: 14
e0b1ee17dc introduced optimization for matching B-tree scan keys required for
the directional scan. However, it incorrectly assumed that all keys required
for opposite direction scan are satisfied by _bt_first(). It has been
illustrated that with multiple scan keys over the same column, a lesser one
(according to the scan direction) could win leaving the other one unsatisfied.
Instead of relying on _bt_first() this commit introduces code that memorizes
whether there was at least one match on the page. If that's true we know that
keys required for opposite-direction scan are satisfied as soon as
corresponding values are not NULLs.
Also, this commit simplifies the description for the optimization of keys
required for the current direction scan. Now the flag used for this is named
continuescanPrechecked and means exactly that *continuescan flag is known
to be true for the last item on the page.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn0LeLcb1PdBnK0xisz8NpHkxRrMr3NWJ%2BKOK-WZ%2BQtTQ%40mail.gmail.com
Reviewed-by: Pavel Borisov
It's not necessary to keep the firstPage flag as a field of BTScanOpaqueData.
This commit makes it an argument of the _bt_readpage() function. We can easily
distinguish first-time and repeated calls (within the scan) of this function.
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzk4SOsw%2BtHuTFiz8U9Jqj-R77rYPkhWKODCBb1mdHACXA%40mail.gmail.com
Reviewed-by: Pavel Borisov
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
Teach _bt_binsrch (and related helper routines like _bt_search and
_bt_compare) about the initial positioning requirements of backward
scans. Routines like _bt_binsrch already know all about "nextkey"
searches, so it seems natural to teach them about "goback"/backward
searches, too. These concepts are closely related, and are much easier
to understand when discussed together.
Now that certain implementation details are hidden from _bt_first, it's
straightforward to add a new optimization: backward scans using the <
strategy now avoid extra leaf page accesses in certain "boundary cases".
Consider the following example, which uses the tenk1 table (and its
tenk1_hundred index) from the standard regression tests:
SELECT * FROM tenk1 WHERE hundred < 12 ORDER BY hundred DESC LIMIT 1;
Before this commit, nbtree would scan two leaf pages, even though it was
only really necessary to scan one leaf page. We'll now descend straight
to the leaf page containing a (12, -inf) high key instead. The scan
will locate matching non-pivot tuples with "hundred" values starting
from the value 11. The scan won't waste a page access on the right
sibling leaf page, which cannot possibly contain any matching tuples.
You can think of the optimization added by this commit as disabling an
optimization (the _bt_compare "!pivotsearch" behavior that was added to
Postgres 12 in commit dd299df8) for a small subset of cases where it was
always counterproductive.
Equivalently, you can think of the new optimization as extending the
"pivotsearch" behavior that page deletion by VACUUM has long required
(since the aforementioned Postgres 12 commit went in) to other, similar
cases. Obviously, this isn't strictly necessary for these new cases
(unlike VACUUM, _bt_first is prepared to move the scan to the left once
on the leaf level), but the underlying principle is the same.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=XPzM8HzaLPq278Vms420mVSHfgs9wi5tjFKHcapZCEw@mail.gmail.com
Allow using multiple worker processes to build BRIN index, which until
now was supported only for BTREE indexes. For large tables this often
results in significant speedup when the build is CPU-bound.
The work is split in a simple way - each worker builds BRIN summaries on
a subset of the table, determined by the regular parallel scan used to
read the data, and feeds them into a shared tuplesort which sorts them
by blkno (start of the range). The leader then reads this sorted stream
of ranges, merges duplicates (which may happen if the parallel scan does
not align with BRIN pages_per_range), and adds the resulting ranges into
the index.
The number of duplicate results produced by workers (requiring merging
in the leader process) should be fairly small, thanks to how parallel
scans assign chunks to workers. The likelihood of duplicate results may
increase for higher pages_per_range values, but then there are fewer
page ranges in total. In any case, we expect the merging to be much
cheaper than summarization, so this should be a win.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for BRIN indexes
(e.g. uniqueness checks).
This also introduces a new index AM flag amcanbuildparallel, determining
whether to attempt to start parallel workers for the index build.
Original patch by me, with reviews and substantial reworks by Matthias
van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
If the tuple being updated is not visible to the crosscheck snapshot,
we return TM_Updated but the assertions would not hold in that case.
Move them to before the cross-check.
Fixes bug #17893. Backpatch to all supported versions.
Author: Alexander Lakhin
Backpatch-through: 12
Discussion: https://www.postgresql.org/message-id/17893-35847009eec517b5%40postgresql.org
This routine is located in heapam_handler.c, not tableamapi.c. Issue
noted while hacking the area for a different patch.
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/ZWQuHltp2KS_0Cct@paquier.xyz
The brininsert code used to initialize (and destroy) BrinDesc and
BrinRevmap for each tuple, which is not free. This patch initializes
these structures only once, and reuses them for all inserts in the same
command. The data is passed through indexInfo->ii_AmCache.
This also introduces an optional AM callback "aminsertcleanup" that
allows performing custom cleanup in case simply pfree-ing ii_AmCache is
not sufficient (which is the case when the cache contains TupleDesc,
Buffers, and so on).
Author: Soumyadeep Chakraborty
Reviewed-by: Alvaro Herrera, Matthias van de Meent, Tomas Vondra
Discussion: https://postgr.es/m/CAE-ML%2B9r2%3DaO1wwji1sBN9gvPz2xRAtFUGfnffpd0ZqyuzjamA%40mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Enforce the rule from transam/README in XLogRegisterBuffer(), and
update callers to follow the rule.
Hash indexes sometimes register clean pages as a part of the locking
protocol, so provide a REGBUF_NO_CHANGE flag to support that use.
Discussion: https://postgr.es/m/c84114f8-c7f1-5b57-f85a-3adc31e1a904@iki.fi
Reviewed-by: Heikki Linnakangas
This allows tools that read the WAL sequentially to identify (possible)
redo points when they're reached, rather than only being able to
detect them in retrospect when XLOG_CHECKPOINT_ONLINE is found, possibly
much later in the WAL stream. There are other possible applications as
well; see the discussion links below.
Any redo location that precedes the checkpoint location should now point
to an XLOG_CHECKPOINT_REDO record, so add a cross-check to verify this.
While adjusting the code in CreateCheckPoint() for this patch, I made it
call WALInsertLockAcquireExclusive a bit later than before, since there
appears to be no need for it to be held while checking whether the system
is idle, whether this is an end-of-recovery checkpoint, or what the current
timeline is.
Bump XLOG_PAGE_MAGIC.
Patch by me, based in part on earlier work from Dilip Kumar. Review by
Dilip Kumar, Amit Kapila, Andres Freund, and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
Discussion: http://postgr.es/m/20230614194717.jyuw3okxup4cvtbt%40awork3.anarazel.de
Discussion: http://postgr.es/m/CA+hUKG+b2ego8=YNW2Ohe9QmSiReh1-ogrv8V_WZpJTqP3O+2w@mail.gmail.com
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
Currently, B-tree code matches every scan key to every item on the page.
Imagine the ordered B-tree scan for the query like this.
SELECT * FROM tbl WHERE col > 'a' AND col < 'b' ORDER BY col;
The (col > 'a') scan key will be always matched once we find the location to
start the scan. The (col < 'b') scan key will match every item on the page
as long as it matches the last item on the page.
This patch implements prechecking of the scan keys required for directional
scan on beginning of page scan. If precheck is successful we can skip this
scan keys check for the items on the page. That could lead to significant
acceleration especially if the comparison operator is expensive.
Idea from patch by Konstantin Knizhnik.
Discussion: https://postgr.es/m/079c3f8e-3371-abe2-e93c-fc8a0ae3f571%40garret.ru
Reviewed-by: Peter Geoghegan, Pavel Borisov
Peter Geoghegan
David Rowley
Alexander Korotkov
Heikki Linnakangas
Masahiko Sawada
Peter Eisentraut
Alvaro Herrera
Michael Paquier
Nathan Bossart
Jeff Davis
Robert Haas
Bruce Momjian
Tomas Vondra