pg_input_is_valid() returns boolean, while pg_input_error_message()
returns the primary error message if the input is bad, or NULL
if the input is OK. The main reason for having two functions is
so that we can test both the details-wanted and the no-details-wanted
code paths.
Although these are primarily designed with testing in mind,
it could well be that they'll be useful to end users as well.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
The idea behind this patch is to make it possible to run individual
test scripts without running the entire core test suite. Making all
the scripts completely independent would involve a massive rewrite,
and would probably be worse for coverage of things like concurrent DDL.
So this patch just does what seems practical with limited changes.
The net effect is that any test script can be run after running
limited earlier dependencies:
* all scripts depend on test_setup
* many scripts depend on create_index
* other dependencies are few in number, and are documented in
the parallel_schedule file.
To accomplish this, I chose a small number of commonly-used tables
and moved their creation and filling into test_setup. Later scripts
are expected not to modify these tables' data contents, for fear of
affecting other scripts' results. Also, our former habit of declaring
all C functions in one place is now gone in favor of declaring them
where they're used, if that's just one script, or in test_setup if
necessary.
There's more that could be done to remove some of the remaining
inter-script dependencies, but significantly more-invasive changes
would be needed, and at least for now it doesn't seem worth it.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
This is essential if we'd like to allow existing extension data types
to support subscripting in future, since dropping and recreating the
type isn't a practical thing for an extension upgrade script, and
direct manipulation of pg_type isn't a great answer either.
There was some discussion about also allowing alteration of typelem,
but it's less clear whether that's a good idea or not, so for now
I forebore.
Discussion: https://postgr.es/m/3724341.1607551174@sss.pgh.pa.us
If a base type supports typmods, its array type does too, with the
same interpretation. Hence changes in pg_type.typmodin/typmodout
must be propagated to the array type.
While here, improve AlterTypeRecurse to not recurse to domains if
there is nothing we'd need to change.
Oversight in fe30e7ebf. Back-patch to v13 where that came in.
Specifically, this patch allows ALTER TYPE to:
* Change the default TOAST strategy for a toastable base type;
* Promote a non-toastable type to toastable;
* Add/remove binary I/O functions for a type;
* Add/remove typmod I/O functions for a type;
* Add/remove a custom ANALYZE statistics functions for a type.
The first of these can be done by the type's owner; all the others
require superuser privilege since misuse could cause problems.
The main motivation for this patch is to allow extensions to
upgrade the feature sets of their data types, so the set of
alterable properties is biased towards that use-case. However
it's also true that changing some other properties would be
a lot harder, as they get baked into physical storage and/or
stored expressions that depend on the type.
Along the way, refactor GenerateTypeDependencies() to make it easier
to call, refactor DefineType's volatility checks so they can be shared
by AlterType, and teach typcache.c that it might have to reload data
from the type's pg_type row, a scenario it never handled before.
Also rearrange alter_type.sgml a bit for clarity (put the
composite-type operations together).
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/20200228004440.b23ein4qvmxnlpht@development
A long time ago, it was necessary to declare datatype I/O functions,
triggers, and language handler support functions in a very type-unsafe
way involving a single pseudo-type "opaque". We got rid of those
conventions in 7.3, but there was still support in various places to
automatically convert such functions to the modern declaration style,
to be able to transparently re-load dumps from pre-7.3 servers.
It seems unnecessary to continue to support that anymore, so take out
the hacks; whereupon the "opaque" pseudo-type itself is no longer
needed and can be dropped.
This is part of a group of patches removing various server-side kluges
for transparently upgrading pre-8.0 dump files. Since we've had few
complaints about dropping pg_dump's support for dumping from pre-8.0
servers (commit 64f3524e2), it seems okay to now remove these kluges.
Discussion: https://postgr.es/m/4110.1583255415@sss.pgh.pa.us
Historically, the notices output by DROP CASCADE tended to come out
in uncertain order, and in some cases you might get different claims
about which object depends on which other one. This is because we
just traversed the dependency tree in the order in which pg_depend
entries are seen, and nbtree has never promised anything about the
order of equal-keyed index entries. We've put up with that for years,
hacking regression tests when necessary to prevent them from emitting
unstable output. However, it's a problem for pending work that will
change nbtree's behavior for equal keys, as that causes unexpected
changes in the regression test results.
Hence, adjust findDependentObjects to sort the results of each
indexscan before processing them. The sort is on descending OID of
the dependent objects, hence more or less reverse creation order.
While this rule could still result in bogus regression test failures
if an OID wraparound occurred mid-test, that seems unlikely to happen
in any plausible development or packaging-test scenario.
This is enough to ensure output stability for ordinary DROP CASCADE
commands, but not for DROP OWNED BY, because that has a different
code path with the same problem. We might later choose to sort in
the DROP OWNED BY code as well, but this patch doesn't do so.
I've also not done anything about reverting the existing hacks to
suppress unstable DROP CASCADE output in specific regression tests.
It might be worth undoing those, but it seems like a distinct question.
The first indexscan loop in findDependentObjects is not touched,
meaning there is a hazard of unstable error reports from that too.
However, said hazard is not the fault of that code: it was designed
on the assumption that there could be at most one "owning" object
to complain about, and that assumption does not seem unreasonable.
The recent patch that added the possibility of multiple
DEPENDENCY_INTERNAL_AUTO links broke that assumption, but we should
fix that situation not band-aid around it. That's a matter for
another patch, though.
Discussion: https://postgr.es/m/12244.1547854440@sss.pgh.pa.us
Commit a26116c6c accidentally changed the behavior of the SQL format_type()
function while refactoring. For the reasons explained in that function's
comment, a NULL typemod argument should behave differently from a -1
argument. Since we've managed to break this, add a regression test
memorializing the intended behavior.
In passing, be consistent about the type of the "flags" parameter.
Noted by Rushabh Lathia, though I revised the patch some more.
Discussion: https://postgr.es/m/CAGPqQf3RB2q-d2Awp_-x-Ur6aOxTUwnApt-vm-iTtceZxYnePg@mail.gmail.com
It's a bit silly to have test functions that aren't tested, so test
them.
In passing, rename int44in/int44out to city_budget_in/_out so that they
match how the regression tests use them. Also, fix city_budget_out
so that it emits the format city_budget_in expects to read; otherwise
we'd have dump/reload failures when testing pg_dump against the
regression database. (We avoided that in the past only because no
data of type city_budget was actually stored anywhere.)
Discussion: https://postgr.es/m/29322.1519701006@sss.pgh.pa.us
We have a lot of code in which option names, which from the user's
viewpoint are logically keywords, are passed through the grammar as plain
identifiers, and then matched to string literals during command execution.
This approach avoids making words into lexer keywords unnecessarily. Some
places matched these strings using plain strcmp, some using pg_strcasecmp.
But the latter should be unnecessary since identifiers would have been
downcased on their way through the parser. Aside from any efficiency
concerns (probably not a big factor), the lack of consistency in this area
creates a hazard of subtle bugs due to different places coming to different
conclusions about whether two option names are the same or different.
Hence, standardize on using strcmp() to match any option names that are
expected to have been fed through the parser.
This does create a user-visible behavioral change, which is that while
formerly all of these would work:
alter table foo set (fillfactor = 50);
alter table foo set (FillFactor = 50);
alter table foo set ("fillfactor" = 50);
alter table foo set ("FillFactor" = 50);
now the last case will fail because that double-quoted identifier is
different from the others. However, none of our documentation says that
you can use a quoted identifier in such contexts at all, and we should
discourage doing so since it would break if we ever decide to parse such
constructs as true lexer keywords rather than poor man's substitutes.
So this shouldn't create a significant compatibility issue for users.
Daniel Gustafsson, reviewed by Michael Paquier, small changes by me
Discussion: https://postgr.es/m/29405B24-564E-476B-98C0-677A29805B84@yesql.se
When a new base type is created using the old-style procedure of first
creating the input/output functions with "opaque" in place of the base
type, the "opaque" argument/return type is changed to the final base type,
on CREATE TYPE. However, we did not create a pg_depend record when doing
that, so the functions were left not depending on the type.
Fixes bug #14706, reported by Karen Huddleston.
Discussion: https://www.postgresql.org/message-id/20170614232259.1424.82774@wrigleys.postgresql.org
Per discussion, it really ought to do this. The original choice to
exclude shell types was probably made in the dark ages before we made
it harder to accidentally create shell types; but that was in 7.3.
Also, cause the standard regression tests to leave a shell type behind,
for convenience in testing the case in pg_dump and pg_upgrade.
Back-patch to all supported branches.
Commit a2e35b53c3 neglected to update the type OID to use further
down in DefineType when TypeShellMake was changed to return
ObjectAddress instead of OID (it got it right in DefineRange, however.)
This resulted in an internal error message being issued when looking up
I/O functions.
Author: Michael Paquier
Also add Asserts() to a couple of other places to ensure that the type
OID being used is as expected.
This is a followup to commit 43ac12c6e6,
which added regression tests checking that I/O functions of built-in
types are not marked volatile. Complaining in CREATE TYPE should push
developers of add-on types to fix any misdeclared functions in their
types. It's just a warning not an error, to avoid creating upgrade
problems for what might be just cosmetic mis-markings.
Aside from adding the warning code, fix a number of types that were
sloppily created in the regression tests.
only type categories in which the previous coding made *every* type
preferred; so there is no change in effective behavior, because the function
resolution rules only do something different when faced with a choice
between preferred and non-preferred types in the same category. It just
seems safer and less surprising to have CREATE TYPE default to non-preferred
status ...
with system catalog lookups, as was foreseen to be necessary almost since
their creation. Instead put the information into two new pg_type columns,
typcategory and typispreferred. Add support for setting these when
creating a user-defined base type.
The category column is just a "char" (i.e. a poor man's enum), allowing
a crude form of user extensibility of the category list: just use an
otherwise-unused character. This seems sufficient for foreseen uses,
but we could upgrade to having an actual category catalog someday, if
there proves to be a huge demand for custom type categories.
In this patch I have attempted to hew exactly to the behavior of the
previous hardwired logic, except for introducing new type categories for
arrays, composites, and enums. In particular the default preferred state
for user-defined types remains TRUE. That seems worth revisiting, but it
should be done as a separate patch from introducing the infrastructure.
Likewise, any adjustment of the standard set of categories should be done
separately.
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
OK, here are a passel of patches for the geometric data types.
These add a "circle" data type, new operators and functions
for the existing data types, and change the default formats
for some of the existing types to make them consistant with
each other. Current formatting conventions (e.g. compatible
with v6.0 to allow dump/reload) are supported, but the new
conventions should be an improvement and we can eventually
drop the old conventions entirely.
For example, there are two kinds of paths (connected line segments),
open and closed, and the old format was
'(1,2,1,2,3,4)' for a closed path with two points (1,2) and (3,4)
'(0,2,1,2,3,4)' for an open path with two points (1,2) and (3,4)
Pretty arcane, huh? The new format for paths is
'((1,2),(3,4))' for a closed path with two points (1,2) and (3,4)
'[(1,2),(3,4)]' for an open path with two points (1,2) and (3,4)
For polygons, the old convention is
'(0,4,2,0,4,3)' for a triangle with points at (0,0),(4,4), and (2,3)
and the new convention is
'((0,0),(4,4),(2,3))' for a triangle with points at (0,0),(4,4), and (2,3)
Other data types which are also represented as lists of points
(e.g. boxes, line segments, and polygons) have similar representations
(they surround each point with parens).
For v6.1, any format which can be interpreted as the old style format
is decoded as such; we can remove that backwards compatibility but ugly
convention for v7.0. This will allow dump/reloads from v6.0.
These include some updates to the regression test files to change the test
for creating a data type from "circle" to "widget" to keep the test from
trashing the new builtin circle type.
Tom Lane
Heikki Linnakangas
Alvaro Herrera
Peter Eisentraut
Robert Haas
Bruce Momjian
Thomas G. Lockhart
Marc G. Fournier