snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
While directly targetting a foreign table with MERGE was already
expressly forbidden, we failed to catch the case of a partitioned table
that has a foreign table as a partition; and the result if you try is an
incomprehensible error. Fix that by adding a specific check.
Backpatch to 15.
Reported-by: Tatsuhiro Nakamori <bt22nakamorit@oss.nttdata.com>
Discussion: https://postgr.es/m/bt22nakamorit@oss.nttdata.com
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
The postmaster is not supposed to do anything that depends
fundamentally on shared memory contents, because that creates
the risk that a backend crash that trashes shared memory will
take the postmaster down with it, preventing automatic recovery.
In commit 969d7cd43 I lost sight of this principle and coded
AssignPostmasterChildSlot() in such a way that it could fail
or even crash if the shared PMSignalState structure became
corrupted. Remarkably, we've not seen field reports of such
crashes; but I managed to induce one while testing the recent
changes around palloc chunk headers.
To fix, make a semi-duplicative state array inside the postmaster
so that we need consult only local state while choosing a "child
slot" for a new backend. Ensure that other postmaster-executed
routines in pmsignal.c don't have critical dependencies on the
shared state, either. Corruption of PMSignalState might now
lead ReleasePostmasterChildSlot() to conclude that backend X
failed, when actually backend Y was the one that trashed things.
But that doesn't matter, because we'll force a cluster-wide reset
regardless.
Back-patch to all supported branches, since this is an old bug.
Discussion: https://postgr.es/m/3436789.1665187055@sss.pgh.pa.us
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
Previously PgStat_StatReplSlotEntry contained the slotname, which was mainly
used when writing out the stats during shutdown, to identify the slot in the
serialized data (at runtime the index in ReplicationSlotCtl->replication_slots
is used, but that can change during a restart). Unfortunately the slotname was
overwritten when the slot's stats were reset.
That turned out to only cause "real" problems if the slot was active during
the reset, triggering an assertion failure at the next
pgstat_report_replslot(). In other paths the stats were re-initialized during
pgstat_acquire_replslot().
Fix this by removing slotname from PgStat_StatReplSlotEntry. Instead we can
get the slot's name from the slot itself. Besides fixing a bug, this also is
architecturally cleaner (a name is not really statistics). This is safe
because stats, for a slot removed while shut down, will not be restored at
startup.
In 15 the slotname is not removed, but renamed, to avoid changing the stats
format. In master, bump PGSTAT_FILE_FORMAT_ID.
This commit does not contain a test for the fix. I think this can only be
tested by a tap test starting pg_recvlogical in the background and checking
pg_recvlogical's output. That type of test is notoriously hard to be reliable,
so committing it shortly before the release is wrapped seems like a bad idea.
Reported-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/YxfagaTXUNa9ggLb@ahch-to
Backpatch: 15-, where the bug was introduced in 5891c7a8ed
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
The pre-v15 behavior was to discard all but the last result,
but with the new behavior of printing all results by default,
we will send each such result to the \g file. However,
we're still opening and closing the \g file for each result,
so you lose all but the last result anyway. Move the output-file
state up to ExecQueryAndProcessResults so that we open/close the
\g file only once per command string.
To support this without changing other behavior, we must
adjust PrintQueryResult to have separate FILE * arguments
for query and status output (since status output has never
gone to the \g file). That in turn makes it a good idea
to push the responsibility for fflush'ing output down to
PrintQueryTuples and PrintQueryStatus.
Also fix an infinite loop if COPY IN/OUT is attempted in \watch.
We used to reject that, but that error exit path got broken
somewhere along the line in v15. There seems no real reason
to reject it anyway as the code now stands, so just remove
the error exit and make sure that COPY OUT data goes to the
right place.
Also remove PrintQueryResult's unused is_watch parameter,
and make some other cosmetic cleanups (adjust obsolete
comments, break some overly-long lines).
Daniel Vérité and Tom Lane
Discussion: https://postgr.es/m/4333844c-2244-4d6e-a49a-1d483fbe304f@manitou-mail.org
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Commit 34f581c39 intended to ensure that RelationGetBufferForTuple
would acquire a visibility-map page pin in case the otherBuffer's
all-visible bit had become set since we last had lock on that page.
But I missed a case: when we're extending the relation, VM concerns
were dealt with only in the relatively-less-likely case that we
fail to conditionally lock the otherBuffer. I think I'd believed
that we couldn't need to worry about it if the conditional lock
succeeds, which is true for the target buffer; but the otherBuffer
was unlocked for awhile so its bit might be set anyway. So we need
to do the GetVisibilityMapPins dance, and then also recheck the
page's free space, in both cases.
Per report from Jaime Casanova. Back-patch to v12 as the previous
patch was (although there's still no evidence that the bug is
reachable pre-v14).
Discussion: https://postgr.es/m/E1lWLjP-00006Y-Ml@gemulon.postgresql.org
I (Álvaro) broke tab-completion for GRANT .. ALL TABLES IN SCHEMA while
removing ALL from the publication syntax for schemas in the
aforementioned commit. I also missed to update a bunch of
tab-completion rules for ALTER/CREATE PUBLICATION that match each
individual piece of ALL TABLES IN SCHEMA. Repair those bugs.
While fixing up that commit, update a couple of outdated comments
related to the same change.
Backpatch to 15.
Author: Shi yu <shiy.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
Commit ebc8b7d44 intended to change the behavior of
PQsslAttribute(NULL, "library"), but accidentally also changed
what happens with a non-NULL conn pointer. Undo that so that
only the intended behavior change happens. Clarify some
associated documentation.
Per bug #17625 from Heath Lord. Back-patch to v15.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
91e9e89dc modified nodeSort.c so that it used datum sorts when the
targetlist of the outer node contained only a single column. That commit
failed to recognise that the Datum returned by tuplesort_getdatum() must
be pfree'd when the type is a byref type. Ronan Dunklau did originally
propose the patch with that restriction, but that, probably through my own
fault, got lost during further development work.
Due to the timing of this report (PG15 RC1 is almost out the door), let's
just restrict the datum sort optimization to apply for byval types only.
We might want to look harder into making this work for byref types in
PG16.
Reported-by: Önder Kalacı
Diagnosis-by: Tom Lane
Discussion: https://postgr.es/m/CACawEhVxe0ufR26UcqtU7GYGRuubq3p6ZWPGXL4cxy_uexpAAQ@mail.gmail.com
Backpatch-through: 15, where 91e9e89dc was introduced.
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
While at it, remove an unused queryString parameter from
CheckPubRelationColumnList() and make other minor stylistic changes.
Backpatch to 15.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/20220926.160426.454497059203258582.horikyota.ntt@gmail.com
We weren't jumbling the merge action list, so wildly different commands
would be considered to use the same query ID. Add that, mention it in
the docs, and some test lines.
Backpatch to 15.
Author: Tatsu <bt22nakamorit@oss.nttdata.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/d87e391694db75a038abc3b2597828e8@oss.nttdata.com
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
Commit 4fb5c794e intended to add coverage of some ambuildempty
methods that were not getting reached, without removing any
test coverage. However, by changing a temp table to unlogged
it managed to negate the intent of 4c51a2d1e, which means that
we didn't have reliable test coverage of ginvacuum.c anymore.
As things stand, much of that file might or might not get reached
depending on timing, which seems pretty undesirable.
Although this is only clearly broken for the GIN test, it seems
best to revert 4fb5c794e altogether and instead add bespoke test
cases covering unlogged indexes for these four AMs. We don't
need to do very much with them, so the extra tests are cheap.
(Note that btree, hash, and bloom already have similar test cases,
so they need no additional work.)
We can also undo dec8ad367. Since the testing deficiency that that
hacked around was later fixed by 2f2e24d90, let's intentionally leave
an unlogged table behind to improve test coverage in the modules that
use the regression database for other test purposes. (The case I used
also leaves an unlogged sequence behind.)
Per report from Alex Kozhemyakin. Back-patch to v15 where the
faulty test came in.
Discussion: https://postgr.es/m/b00c8ee096ee46cd25c183125562a1a7@postgrespro.ru
Because index creation does not go through heap_create_with_catalog() we
didn't call pgstat_create_relation(), leading to index stats of a newly
created realtion not getting dropped during rollback. To fix, move the
pgstat_create_relation() to heap_create(), which indexes do use.
Similarly, because dropping an index does not go through
heap_drop_with_catalog(), we didn't drop index stats when the transaction
dropping an index committed. Here there's no convenient common path for
indexes and relations, so index_drop() now calls pgstat_drop_relation().
Add tests for transactional index stats handling.
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/51bbf286-2b4a-8998-bd12-eaae4b765d99@amazon.com
Backpatch: 15-, like 8b1dccd37c, which introduced the bug
The extended query protocol implementation I added in commit
acb7e4eb6b has bugs when used in pipeline mode. Rather than spend
more time trying to fix it, remove that code and make the function rely
on simple query protocol only, meaning it can no longer be used in
pipeline mode.
Users can easily change their applications to use PQsendQueryParams
instead. We leave PQsendQuery in place for Postgres 14, just in case
somebody is using it and has not hit the mentioned bugs; but we should
recommend that it not be used.
Backpatch to 15.
Per bug report from Gabriele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
The "emulation" I wrote for PQsendQuery in pipeline mode to use extended
query protocol, in commit acb7e4eb6b, is problematic. Due to numerous
bugs we'll soon remove it. As a first step and for all branches back to
14, stop using PQsendQuery in libpq_pipeline. Also remove a few test
lines that will no longer be relevant.
Backpatch to 14.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
The bounds hardcoded in compression.c since ffd5365 (minimum at 1 and
maximum at 22) do not match the reality of what zstd is able to
handle, these values being available via ZSTD_maxCLevel() and
ZSTD_minCLevel() at run-time. The maximum of 22 is actually correct
in recent versions, but the minimum was not as the library can go down
to -131720 by design. This commit changes the code to use the run-time
values in the code instead of some hardcoded ones.
Zstd seems to assume that these bounds could change in the future, and
Postgres will be able to adapt automatically to such changes thanks to
what's being done in this commit.
Reported-by: Justin Prysby
Discussion: https://postgr.es/m/20220922033716.GL31833@telsasoft.com
Backpatch-through: 15
If the ps display is not cleared at this point, the process could
continue displaying "recovering NNN" even if handling end-of-recovery
steps. df9274a has tackled that by providing some information with the
end-of-recovery checkpoint but 7ff23c6 has nullified the effect of the
first commit.
Per a suggestion from Justin, just clear the ps display when we are done
with recovery, so as no incorrect information is displayed. This may
get extended in the future, but for now restore the pre-7ff23c6
behavior.
Author: Justin Prysby
Discussion: https://postgr.es/m/20220913223954.GU31833@telsasoft.com
Backpatch-through: 15
Commit 7103ebb7aa added the tab-completion for MERGE accidentally
in the middle of that for LOCK TABLE. This commit fixes this issue.
This also adds some tab-completion for MERGE.
Back-patch to v15 where MERGE was introduced.
Author: Kotaro Kawamoto, Fujii Masao
Reviewed-by: Shinya Kato, Álvaro Herrera
Discussion: https://postgr.es/m/9f1ad2a87a58cd5e7d64f3993130958d@oss.nttdata.com
We check that the ICU locale is only specified if the ICU locale
provider is selected. But we did that too early. We need to wait
until we load the settings of the template database, since that could
also set what the locale provider is.
Reported-by: Marina Polyakova <m.polyakova@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/9ba4cd1ea6ed6b7b15c0ff15e6f540cd@postgrespro.ru
For publication schemas (OBJECT_PUBLICATION_NAMESPACE) and user
mappings (OBJECT_USER_MAPPING), pg_get_object_address() checked the
array length of the second argument, but not of the first argument.
If the first argument was too long, it would just silently ignore
everything but the first argument. Fix that by checking the length of
the first argument as well.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/caaef70b-a874-1088-92ef-5ac38269c33b%40enterprisedb.com
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
The header comment for get_cheapest_group_keys_order() claimed that the
output arguments were set to a newly allocated list which may be freed by
the calling function, however, this was not always true as the function
would simply leave these arguments untouched in some cases.
This tripped me up when working on 1349d2790 as I mistakenly assumed I
could perform a list_concat with the output parameters. That turned out
bad due to list_concat modifying the original input lists.
In passing, make it more clear that the number of distinct values is
important to reduce tiebreaks during sorts. Also, explain what the
n_preordered parameter means.
Backpatch-through: 15, where get_cheapest_group_keys_order was introduced.
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
The function has a bool argument named "case_insensitive", but that was
spelled "case_sensitive" in the declaration. Make them consistent now
to avoid confusion in the future.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Backpatch: 10-
So far they were created below CacheMemoryContext. However, that's not
guaranteed to exist in all situations, leading to memory contexts created as
top-level contexts. There isn't actually a good reason anymore to create them
below CacheMemoryContext, so just creating them below TopMemoryContext seems
the best approach.
Reported-by: Reid Thompson <reid.thompson@crunchydata.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Author: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Discussion: https://postgr.es/m/b948b729-42fe-f88c-2f4a-0e65d84c049b@amazon.com
Backpatch: 15-
Very occasionally the stats test failed due to the number of sessions not
being updated yet. Likely this requires that there is contention on the
database's stats entry. Solve this by forcing pending stats to be flushed
before fetching the stats.
I verified that there are no other test failures after making
pgstat_report_stat() only flush stats when force = true.
Per message from Tom Lane and buildfarm member crake.
Discussion: https://postgr.es/m/3428246.1663271992@sss.pgh.pa.us
Backpatch: 15-, where 5264add784 added the test
Treat arguments declared as RECORD as if that were a polymorphic type
(which it is, sort of), in that we substitute the actual argument type
while forming the function cache lookup key. This allows the specific
composite type to be known in some cases where it was not before,
at the cost of making a separate function cache entry for each named
composite type that's passed to the function during a session. The
particular symptom discussed in bug #17610 could be solved in other
more-efficient ways, but only at the cost of considerable development
work, and there are other cases where we'd still fail without this.
Per bug #17610 from Martin Jurča. Back-patch to v11 where we first
allowed plpgsql functions to be declared as taking type RECORD.
Discussion: https://postgr.es/m/17610-fb1eef75bf6c2364@postgresql.org
If the createdb tests run under the C locale, the database cluster
will be initialized with encoding SQL_ASCII. With the checks added in
c7db01e325, this will cause several
ICU-related tests to fail because SQL_ASCII is not supported by ICU.
To work around that, use initdb option -E UTF8 for those tests to get
past that check.
Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
I happened to notice that libpq_pipeline's private implementation
of pg_fatal lacked any pg_attribute_printf decoration. Indeed,
adding that turned up a mistake! We'd likely never have noticed
because the error exits in this code are unlikely to get hit,
but still, it's a bug.
We're so used to having the compiler check this stuff for us that
a printf-like function without pg_attribute_printf is a land mine.
I wonder if there is a way to detect such omissions.
Back-patch to v14 where this code came in.
After commit cc2c7d65fc added this flag,
failure to reset it caused assertion failures. In non-assert builds, it
made the system fail to achieve the objectives listed in that commit;
chiefly, we might emit a spurious log message. Back-patch to v15, where
that commit first appeared.
Bharath Rupireddy and Kyotaro Horiguchi. Reviewed by Dilip Kumar,
Nathan Bossart and Michael Paquier. Reported by Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-sE3ry=ycMPVtC+Djw4Fd7gbUGVv_qqw6qfzp=JLvqT3g@mail.gmail.com
In 29f45e299, we added support for optimizing the execution of NOT
IN(values) by using a hash table instead of a linear search over the
array. That commit neglected to update the header comment for
convert_saop_to_hashed_saop() to mention this fact. Here we fix that.
Author: James Coleman
Discussion: https://postgr.es/m/CAAaqYe99NUpAPcxgchGstgM23fmiGjqQPot8627YgkBgNt=BfA@mail.gmail.com
Backpatch-through: 15, where 29f45e299 was added.
This appears to be a merge mistake in 96ef3237bf. We could put it
back the way it was before JSON_TABLE and it'd be two lines shorter, but
it's likely that JSON_TABLE will be back and will prefer things this
way. It makes no other difference in practice.
Backpatch to 15.
Reported by Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAr4nOcNQskC4oBEZN4S+4heJ=1ch_ZKOxU+_Ef-FQSf-g@mail.gmail.com
The zlib documentation mentions the values supported for the compression
strategy, but this code has been using a hardcoded value of 0 rather
than Z_DEFAULT_STRATEGY. This commit adjusts the code to use
Z_DEFAULT_STRATEGY.
Backpatch down to where this code has been added to ease the backport of
any future patch touching this area.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 10
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
This is backpatched from master so that future backpatchable code can
make use of these APIs. This patch by itself does not contain any
users of these APIs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d4306, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
This change concerns a couple of .txt files (for internal state checks)
that were still written in the path where the binary is executed, and
not in the subdirectory located in the target cluster. Like the other
.txt files doing already so (like loadable_libraries.txt), these are
saved in the base output directory. Note that on failure, the logs
report the full path to the .txt file generated, so these are easy to
find.
Oversight in 38bfae3.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/181A6DA8-3B7F-4B71-82D5-363FF0146820@yesql.se
Backpatch-through: 15
The primary fix here is to fix has_matching_range() so it does not
reference ranges->values[-1] when nranges == 0. Similar problems existed
in AssertCheckRanges() too. It does not look like any of these problems
could lead to a crash as the array in question is at the end of the Ranges
struct, and values[-1] is memory that belongs to other fields in the
struct. However, let's get rid of these rather unsafe coding practices.
In passing, I (David) adjusted some comments to try to make it more clear
what some of the fields are for in the Ranges struct. I had to study the
code to find out what nsorted was for as I couldn't tell from the
comments.
Author: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqJQzPitufX-jR=YUbJafpCDAKUnwgdbX_MzSc93wuvdw@mail.gmail.com
Backpatch-through: 14, where multi-range brin was added.
Commit c4c340088 changed geometric operators to use float4 and float8
functions, and handle NaN's in a better way. The circle sameness test
had a typo in the code which resulted in all comparisons with the left
circle having a NaN radius considered same.
postgres=# select '<(0,0),NaN>'::circle ~= '<(0,0),1>'::circle;
?column?
----------
t
(1 row)
This fixes the sameness test to consider the radius of both the left
and right circle.
Backpatch to v12 where this was introduced.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAo8dK=yctg2ZzjJuzV4zgOPBxRU5+Kb+yatFiddtQk6Rw@mail.gmail.com
Backpatch-through: v12
The ECPG preprocessor converted code such as
static varchar str1[10], str2[20], str3[30];
into
static struct varchar_1 { int len; char arr[ 10 ]; } str1 ;
struct varchar_2 { int len; char arr[ 20 ]; } str2 ;
struct varchar_3 { int len; char arr[ 30 ]; } str3 ;
thus losing the storage attribute for the later variables.
Repeat the declaration for each such variable.
(Note that this occurred only for variables declared "varchar"
or "bytea", which may help explain how it escaped detection
for so long.)
Andrey Sokolov
Discussion: https://postgr.es/m/942241662288242@mail.yandex.ru
Because of inadequate filtering, the check triggers were confusing the
search for action triggers in GetForeignKeyActionTriggers and vice-versa
in GetForeignKeyCheckTriggers; this confusion results in seemingly
random assertion failures, and can have real impact in non-asserting
builds depending on catalog order. Change these functions so that they
correctly ignore triggers that are not relevant to each side.
To reduce the odds of further problems, do not break out of the
searching loop in assertion builds. This break is likely to hide bugs;
without it, we would have detected this bug immediately.
This problem was introduced by f4566345cf, so backpatch to 15 where
that commit first appeared.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220908172029.sejft2ppckbo6oh5@awork3.anarazel.de
Discussion: https://postgr.es/m/4104619.1662663056@sss.pgh.pa.us
On failure in restoring a block image, no details were provided, while
it is possible to see failure with an inconsistent record state, a
failure in processing decompression or a failure in decompression
because a build does not support this option.
RestoreBlockImage() is used in two code paths in the backend code,
during recovery and when checking a page consistency after applying
masking, and both places are changed to consume the error message
produced by the internal routine when it returns a false status. All
the error messages are reported under ERRCODE_INTERNAL_ERROR, that gets
used also when attempting to access a page compressed by a method
not supported by the build attempting the decompression. This is
something that can happen in core when doing physical replication with
primary and standby using inconsistent build options, for example.
This routine is available since 2c03216d and it has never provided any
context about the error happening when it failed. This change is
justified even more after 57aa5b2, that introduced compression of FPWs
in WAL.
Reported-by: Justin Prysby
Author: Michael Paquier
Discussion: https://postgr.es/m/20220905002320.GD31833@telsasoft.com
Backpatch-through: 15
During ALTER TABLE ATTACH PARTITION, if the name of a parent's foreign
key constraint is already used on the partition, the code tries to
choose another one before the FK attributes list has been populated,
so the resulting constraint name was "<relname>__fkey" instead of
"<relname>_<attrs>_fkey". Repair, and add a test case.
Backpatch to 12. In 11, the code to attach a partition was not smart
enough to cope with conflicting constraint names, so the problem doesn't
exist there.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220901184156.738ebee5@karst
We should process completed IOs *before* trying to start more, so that
it is always possible to decode one more record when the decoded record
queue is empty, even if maintenance_io_concurrency is set so low that a
single earlier WAL record might have saturated the IO queue.
That bug was hidden because the effect of maintenance_io_concurrency was
arbitrarily clamped to be at least 2. Fix the ordering, and also remove
that clamp. We need a special case for 0, which is now treated the same
as recovery_prefetch=off, but otherwise the number is used directly.
This allows for testing with 1, which would have made the problem
obvious in simple test scenarios.
Also add an explicit error message for missing contrecords. It was a
bit strange that we didn't report an error already, and became a latent
bug with prefetching, since the internal state that tracks aborted
contrecords would not survive retrying, as revealed by
026_overwrite_contrecord.pl with this adjustment. Reporting an error
prevents that.
Back-patch to 15.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220831140128.GS31833%40telsasoft.com
The addition of published column names forgot to filter on attisdropped,
leading to cases where you could see "........pg.dropped.1........"
or the like as a reportedly-published column.
While we're here, rewrite the new subquery to get a more efficient plan
for it.
Hou Zhijie, per report from Jaime Casanova. Back-patch to v15 where
the bug was introduced. (Sadly, this means we need a post-beta4
catversion bump before beta4 has even hit the streets. I see no
good alternative though.)
Discussion: https://postgr.es/m/Yxa1SU4nH2HfN3/i@ahch-to
Commit e3fcca0d0d reverted modifications to HOT for BRIN, but it also
removed a couple unrelated tests from stats.sql. Reinstate those tests.
Reported-by: Peter Eisentraut
Commit db0d67db2 tweaked sort costing, which however resulted in a
couple plan changes in our regression tests. Most of the new plans were
fine, but partition_aggregate were meant to test parallel plans and the
new plans were serial.
Fix that by lowering parallel_setup_cost to 0, which is enough to switch
to the parallel plan again.
Report and patch by David Rowley.
Author: David Rowley
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/CAApHDvpVFgWzXdtUQkjyOPhNrNvumRi_=ftgS79KeAZ92tnHKQ@mail.gmail.com
XLogPageRead() can retry internally after a pread() system call has
succeeded, in the case of short reads, and page validation failures
while in standby mode (see commit 0668719801). Due to an oversight in
commit 3f1ce973, these cases could leave stale data in the internal
cache of xlogreader.c without marking it invalid. The main defense
against stale cached data on failure to read a page was in the error
handling path of the calling function ReadPageInternal(), but that
wasn't quite enough for errors handled internally by XLogPageRead()'s
retry loop if we then exited with XLREAD_WOULDBLOCK.
1. ReadPageInternal() now marks the cache invalid before calling the
page_read callback, by setting state->readLen to 0. It'll be set to
a non-zero value only after a successful read. It'll stay valid as
long as the caller requests data in the cached range.
2. XLogPageRead() no long performs internal retries while reading
ahead. While such retries should work, the general philosophy is
that we should give up prefetching if anything unusual happens so we
can handle it when recovery catches up, to reduce the complexity of
the system. Let's do that here too.
3. While here, a new function XLogReaderResetError() improves the
separation between xlogrecovery.c and xlogreader.c, where the former
previously clobbered the latter's internal error buffer directly.
The new function makes this more explicit, and also clears a related
flag, without which a standby would needlessly retry in the outer
function.
Thanks to Noah Misch for tracking down the conditions required for a
rare build farm failure in src/bin/pg_ctl/t/003_promote.pl, and
providing a reproducer.
Back-patch to 15.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20220807003627.GA4168930%40rfd.leadboat.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
Primarily, this fixes an incorrect calculation in SlabCheck which was
looking in the wrong byte for the sentinel check. The reason that we've
never noticed this before in the form of a failing sentinel check is
because the pre-check to this always fails because all current core users
of slab contexts have a chunk size which is already MAXALIGNed, therefore
there's never any space for the sentinel byte. It is possible that an
extension needs to use a slab context and if they do with a chunk size
that's not MAXALIGNed, then they'll likely get errors about overwritten
sentinel bytes.
Additionally, this patch changes various calculations which are being done
based on the sizeof(SlabBlock). Currently, sizeof(SlabBlock) is a
multiple of 8, therefore sizeof(SlabBlock) is the same as
MAXALIGN(sizeof(SlabBlock)), however, if we were to ever have to add any
fields to that struct as part of a bug fix, then SlabAlloc could end up
returning a non-MAXALIGNed pointer. To be safe, let's ensure we always
MAXALIGN sizeof(SlabBlock) before using it in any calculations.
This patch has already been applied to master in d5ee4db0e.
Diagnosed-by: Tomas Vondra, Tom Lane
Author: Tomas Vondra, David Rowley
Discussion: https://postgr.es/m/CAA4eK1%2B1JyW5TiL%3DyV-3Uq1CrfnTyn0Xrk5uArt31Z%3D8rgPhXQ%40mail.gmail.com
Backpatch-through: 10
get_database_list() failed to restore the caller's memory context,
instead leaving current context set to TopMemoryContext which is
how CommitTransactionCommand() leaves it. The callers both think
they are using short-lived contexts, for the express purpose of
not having to worry about cleaning up individual allocations.
The net effect therefore is that supposedly short-lived allocations
could accumulate indefinitely in the launcher's TopMemoryContext.
Although this has been broken for a long time, it seems we didn't
have any obvious memory leak here until v15's rearrangement of the
stats logic. I (tgl) am not entirely convinced that there's no
other leak at all, though, and we're surely at risk of adding one
in future back-patched fixes. So back-patch to all supported
branches, even though this may be only a latent bug in pre-v15.
Reid Thompson
Discussion: https://postgr.es/m/972a4e12b68b0f96db514777a150ceef7dcd2e0f.camel@crunchydata.com
If the input word exceeds 1000 bytes, don't pass it to the stemmer;
just return it as-is after case folding. Such an input is surely
not a word in any human language, so whatever the stemmer might
do to it would be pretty dubious in the first place. Adding this
restriction protects us against a known recursion-to-stack-overflow
problem in the Turkish stemmer, and it seems like good insurance
against any other safety or performance issues that may exist in
the Snowball stemmers. (I note, for example, that they contain no
CHECK_FOR_INTERRUPTS calls, so we really don't want them running
for a long time.) The threshold of 1000 bytes is arbitrary.
An alternative definition could have been to treat such words as
stopwords, but that seems like a bigger break from the old behavior.
Per report from Egor Chindyaskin and Alexander Lakhin.
Thanks to Olly Betts for the recommendation to fix it this way.
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
The default of lazy symbol resolution means that when the postmaster
first reaches the select() call in ServerLoop, it'll need to resolve
the link to that libc entry point. NetBSD's dynamic loader takes
an internal lock while doing that, and if a signal interrupts the
operation then there is a risk of self-deadlock should the signal
handler do anything that requires that lock, as several of the
postmaster signal handlers do. The window for this is pretty narrow,
and timing considerations make it unlikely that a signal would arrive
right then anyway. But it's semi-repeatable on slow single-CPU
machines, and in principle the race could happen with any hardware.
The least messy solution to this is to force binding of dynamic
symbols at postmaster start, using the "-z now" linker option.
While we're at it, also use "-z relro" so as to provide a small
security gain.
It's not entirely clear whether any other platforms share this
issue, but for now we'll assume it's NetBSD-specific. (We might
later try to use "-z now" on more platforms for performance
reasons, but that would not likely be something to back-patch.)
Report and patch by me; the idea to fix it this way is from
Andres Freund.
Discussion: https://postgr.es/m/3384826.1661802235@sss.pgh.pa.us
When a PostgreSQL instance performing archive recovery but not using
standby mode is promoted, and the last WAL segment that it attempted
to read ended in a partial record, the previous code would create
invalid WAL on the new timeline. The WAL from the previously timeline
would be copied to the new timeline up until the end of the last valid
record, but instead of beginning to write WAL at immediately
afterwards, the promoted server would write an overwrite contrecord at
the beginning of the next segment. The end of the previous segment
would be left as all-zeroes, resulting in failures if anything tried
to read WAL from that file.
The root of the issue is that ReadRecord() decides whether to set
abortedRecPtr and missingContrecPtr based on the value of StandbyMode,
but ReadRecord() switches to a new timeline based on the value of
ArchiveRecoveryRequested. We shouldn't try to write an overwrite
contrecord if we're switching to a new timeline, so change the test in
ReadRecod() to check ArchiveRecoveryRequested instead.
Code fix by Dilip Kumar. Comments by me incorporating suggested
language from Álvaro Herrera. Further review from Kyotaro Horiguchi
and Sami Imseih.
Discussion: http://postgr.es/m/CAFiTN-t7umki=PK8dT1tcPV=mOUe2vNhHML6b3T7W7qqvvajjg@mail.gmail.com
Discussion: http://postgr.es/m/FB0DEA0B-E14E-43A0-811F-C1AE93D00FF3%40amazon.com
While waiting for slots to become available in wait_on_slots() in
parallel_slot.c, the cancellation always relied on the first connection
in the set to do the job. This could cause problems when this slot's
socket is gone as PQgetCancel() would return NULL in this case. Rather
than always using the first connection, this changes the logic to use
the first valid connection for the cancellation.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAokk1h_pUwGXsYS4oVOuf35s1O2o3TXGHpV8=AWikvgHA@mail.gmail.com
Backpatch-through: 14
The comment in basebackup.c updated by 33bd4698c1 was actually
obsolete to begin with, since the symbols it was referring to haven't
existed in that header file for quite some time. The header file is
still needed for other reasons, though, so keep the #include, just
drop the comment.
pg_start_backup() and pg_stop_backup() have been respectively renamed to
pg_backup_start() and pg_backup_stop() as of 39969e2, but a few comments
did not get the call.
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/YrqGlj1+4DF3dbZ/@paquier.xyz
SplitToVariants() in the ispell code, lseg_inside_poly() in geo_ops.c,
and regex_selectivity_sub() in selectivity estimation could recurse
until stack overflow; fix by adding check_stack_depth() calls.
So could next() in the regex compiler, but that case is better fixed by
converting its tail recursion to a loop. (We probably get better code
that way too, since next() can now be inlined into its sole caller.)
There remains a reachable stack overrun in the Turkish stemmer, but
we'll need some advice from the Snowball people about how to fix that.
Per report from Egor Chindyaskin and Alexander Lakhin. These mistakes
are old, so back-patch to all supported branches.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/1661334672.728714027@f473.i.mail.ru
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
Somewhere during the development of the patch acquiring a lock during read
access to variable-numbered stats got lost. The missing lock acquisition won't
cause corruption, but can lead to reading torn values when accessing
stats. Add the missing lock acquisitions.
Reported-by: Greg Stark <stark@mit.edu>
Reviewed-by: "Drouvot, Bertrand" <bdrouvot@amazon.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CAM-w4HMYkM_DkYhWtUGV+qE_rrBxKOzOF0+5faozxO3vXrc9wA@mail.gmail.com
Backpatch: 15-
As such the current usage of & won't produce incorrect results but it
would be better to use && to short-circuit the evaluation of second
condition when the same is not required.
Author: Ranier Vilela
Reviewed-by: Tom Lane, Bharath Rupireddy
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAEudQApL8QcoYwQuutkWKY_h7gBY8F0Xs34YKfc7-G0i83K_pw@mail.gmail.com
Compiling with -Wshadow=compatible-local yields quite a few warnings about
local variables being shadowed by compatible local variables in an inner
scope. Of course, this is perfectly valid in C, but we have had bugs in
the past as a result of developers failing to notice this. af7d270dd is a
recent example.
Here we do a cleanup of warnings we receive from -Wshadow=compatible-local
for code which is new to PostgreSQL 15. We've yet to have the discussion
about if we actually ever want to run that as a standard compilation flag.
We'll need to at least get the number of warnings down to something easier
to manage before we can realistically consider if we want this or not.
This commit is the first step towards reducing the warnings.
The changes being made here are all fairly trivial. Because of that, and
the fact that v15 is still in beta, this is being back-patched into 15.
It seems more risky not to do this as the risk of future bugs is increased
by the additional conflicts that this commit could cause for any future
bug fixes touching the same areas as this commit.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Backpatch-through: 15
Consistently avoid trusting a sample of only one page at the point that
VACUUM determines a new reltuples for the target table (though only when
the table is larger than a single page). This is follow-up work to
commit 74388a1a, which added a heuristic to prevent reltuples from
becoming distorted by successive VACUUM operations that each scan only a
single heap page (which was itself more or less a bugfix for an issue in
commit 44fa8488, which simplified VACUUM's handling of scanned pages).
The original bugfix commit did not account for certain remaining cases
that where not affected by its "2% of total relpages" heuristic. This
happened with relations that are small enough that just one of its pages
exceeded the 2% threshold, yet still big enough for VACUUM to deem
skipping most of its pages via the visibility map worthwhile. reltuples
could still become distorted over time with such a table, at least in
scenarios where the VACUUM command is run repeatedly and without the
table itself ever changing.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk7d4m3oEbEWkWQKd+gz-eD_peBvdXVk1a_KBygXadFeg@mail.gmail.com
Backpatch: 15-, where the rules for scanned pages changed.
Initialize shared memory allocated for index stats to avoid a hard
crash. This was possible when parallel VACUUM became confused about the
current phase of index processing.
Oversight in commit 8e1fae1938, which refactored parallel VACUUM.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220818133406.GL26426@telsasoft.com
Backpatch: 15-, the first version with the refactoring commit.
When creating a partitioned index, DefineIndex tries to identify
any existing indexes on the partitions that match the partitioned
index, so that it can absorb those as child indexes instead of
building new ones. Part of the matching is to compare IndexInfo
structs --- but that wasn't done quite right. We're comparing
the IndexInfo built within DefineIndex itself to one made from
existing catalog contents by BuildIndexInfo. Notably, while
BuildIndexInfo will run index expressions and predicates through
expression preprocessing, that has not happened to DefineIndex's
struct. The result is failure to match and subsequent creation
of duplicate indexes.
The easiest and most bulletproof fix is to build a new IndexInfo
using BuildIndexInfo, thereby guaranteeing that the processing done
is identical.
While here, let's also extract the opfamily and collation data
from the new partitioned index, removing ad-hoc logic that
duplicated knowledge about how those are constructed.
Per report from Christophe Pettus. Back-patch to v11 where
we invented partitioned indexes.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/8864BFAA-81FD-4BF9-8E06-7DEB8D4164ED@thebuild.com
The table column that stores this is of type oid, but is actually limited
to uint16 and has a different path for creating new values. Some of
the documentation already referred to it as an ID, so let's standardize
on that.
While at it, most format strings already use %u, so for consintency
change the remaining stragglers using %d.
Per suggestions from Tom Lane and Justin Pryzby
Discussion: https://www.postgresql.org/message-id/3437166.1659620465%40sss.pgh.pa.us
Backpatch to v15
This event can happen when using SET ACCESS METHOD, as the data files of
the materialized need a full refresh but this command tag was not
updated to reflect that. The documentation is updated to track this
behavior.
Author: Onder Kalaci
Discussion: https://postgr.es/m/CACawEhXwHN3X34FiwoYG8vXR-oyUdrp7qcfRWSzS+NPahS5gSw@mail.gmail.com
Backpatch-through: 15
The assert, introduced by 9f1cf97bb5, is intended to check if the prefix
is terminated by a \0 byte, but it has two flaws. Firstly, prefix_size
includes the \0 byte, so prefix[prefix_size] points to the byte after
the null byte. Secondly, the check ensures the byte is not equal \0,
while it should be checking the opposite.
Backpatch-through: 14
Discussion: https://postgr.es/m/b99b6101-2f14-3796-3dfa-4a6cd7d4326d@enterprisedb.com
The current publisher code checks if UPDATE or DELETE can be executed with
the replica identity of the table even if it's a partitioned table. We can
skip checking the replica identity for partitioned tables because the
operations are actually performed on the leaf partitions (not the
partitioned table).
Reported-by: Brad Nicholson
Author: Hou Zhijie
Reviewed-by: Peter Smith, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAMMnM%3D8i5DohH%3DYKzV0_wYuYSYvuOJoL9F5nzXTc%2ByzsG1f6rg%40mail.gmail.com
There's a convention that externally-visible libpq functions should
check for a NULL PGconn pointer, and fail gracefully instead of
crashing. PQflush() and PQisnonblocking() didn't get that memo
though. Also add a similar check to PQdefaultSSLKeyPassHook_OpenSSL;
while it's not clear that ordinary usage could reach that with a
null conn pointer, it's cheap enough to check, so let's be consistent.
Daniele Varrazzo and Tom Lane
Discussion: https://postgr.es/m/CA+mi_8Zm_mVVyW1iNFgyMd9Oh0Nv8-F+7Y3-BqwMgTMHuo_h2Q@mail.gmail.com
When enlarging the work buffers of a VarStringSortSupport object,
varstrfastcmp_locale was careful to keep them in the ssup_cxt
memory context; but varstr_abbrev_convert just used palloc().
The latter creates a hazard that the buffers could be freed out
from under the VarStringSortSupport object, resulting in stomping
on whatever gets allocated in that memory later.
In practice, because we only use this code for ICU collations
(cf. 3df9c374e), the problem is confined to use of ICU collations.
I believe it may have been unreachable before the introduction
of incremental sort, too, as traditional sorting usually just
uses one context for the duration of the sort.
We could fix this by making the broken stanzas in varstr_abbrev_convert
match the non-broken ones in varstrfastcmp_locale. However, it seems
like a better idea to dodge the issue altogether by replacing the
pfree-and-allocate-anew coding with repalloc, which automatically
preserves the chunk's memory context. This fix does add a few cycles
because repalloc will copy the chunk's content, which the existing
coding assumes is useless. However, we don't expect that these buffer
enlargement operations are performance-critical. Besides that, it's
far from obvious that copying the buffer contents isn't required, since
these stanzas make no effort to mark the buffers invalid by resetting
last_returned, cache_blob, etc. That seems to be safe upon examination,
but it's fragile and could easily get broken in future, which wouldn't
get revealed in testing with short-to-moderate-size strings.
Per bug #17584 from James Inform. Whether or not the issue is
reachable in the older branches, this code has been broken on its
own terms from its introduction, so patch all the way back.
Discussion: https://postgr.es/m/17584-95c79b4a7d771f44@postgresql.org
It's possible to reach this case when work_mem is very small and tupsize
is (relatively) very large. In that case ExecChooseHashTableSize would
get an assertion failure, or with asserts off it'd compute nbuckets = 0,
which'd likely cause misbehavior later (I've not checked). To fix,
clamp the number of buckets to be at least 1.
This is due to faulty conversion of old my_log2() coding in 28d936031.
Back-patch to v13, as that was.
Zhang Mingli
Discussion: https://postgr.es/m/beb64ca0-91e2-44ac-bf4a-7ea36275ec02@Spark
Most parts of the parser can expect that the stack overflow check
in transformExprRecurse() will trigger before things get desperate.
However, transformFromClauseItem() can recurse directly to self
without having analyzed any expressions, so it's possible to drive
it to a stack-overrun crash. Add a check to prevent that.
Per bug #17583 from Egor Chindyaskin. Back-patch to all supported
branches.
Richard Guo
Discussion: https://postgr.es/m/17583-33be55b9f981f75c@postgresql.org
As of 897795240c, check constraints can
be declared invalid. But that patch didn't update _outConstraint() to
also show the relevant struct fields (which were only applicable to
foreign keys before that). This currently only affects debugging
output, so no impact in practice.
96ef3b8ff1 accidentally copied a not
applicable comment from the float8_pass_by_value code to the
data_checksums code. Remove that.
87d3b35a1c changed pg_upgrade to
checking the checksum version rather than just the Boolean presence of
checksums, but didn't change the field type in its ControlData struct
from bool. So this would not work correctly if there ever is a
checksum version larger than 1.
If an error occurs before we close the fake relcache entry, the the
fake relcache entry will be destroyed by the SmgrRelation will
survive until end of transaction. Its smgr_owner pointer ends up
pointing to already-freed memory.
The original reason for using a fake relcache entry here was to try
to avoid reusing an SMgrRelation across a relevant invalidation. To
avoid that problem, just call smgropen() again each time we need a
reference to it. Hopefully someday we will come up with a more
elegant approach, but accessing uninitialized memory is bad so let's
do this for now.
Dilip Kumar, reviewed by Andres Freund and Tom Lane. Report by
Justin Pryzby.
Discussion: http://postgr.es/m/20220802175043.GA13682@telsasoft.com
Discussion: http://postgr.es/m/CAFiTN-vSFeE6_W9z698XNtFROOA_nSqUXWqLcG0emob_kJ+dEQ@mail.gmail.com
The grammar added for MERGE inadvertently made it accepted syntax in
places that were not prepared to deal with it -- namely COPY and inside
CTEs, but invoking these things with MERGE currently causes assertion
failures or weird misbehavior in non-assertion builds. Protect those
places by checking for it explicitly until somebody decides to implement
it.
Reported-by: Alexey Borzov <borz_off@cs.msu.su>
Discussion: https://postgr.es/m/17579-82482cd7b267b862@postgresql.org
The set of fields printed by _outConstraint() in the CONSTR_IDENTITY
case didn't match the set of fields actually used in that case. (The
code was probably uncarefully copied from the CONSTR_DEFAULT case.)
Fix that by using the right set of fields. Since there is no read
support for this node type, this is really just for debugging output
right now, so it doesn't affect anything important.
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this changes the snapshot builder so that it
remembers the last-running-xacts list of the decoded RUNNING_XACTS record
after restoring the previously serialized snapshot. Then, we mark the
transaction as containing catalog changes if it's in the list of initial
running transactions and its commit record has XACT_XINFO_HAS_INVALS. To
avoid ABI breakage, we store the array of the initial running transactions
in the static variables InitialRunningXacts and NInitialRunningXacts,
instead of storing those in SnapBuild or ReorderBuffer.
This approach has a false positive; we could end up adding the transaction
that didn't change catalog to the snapshot since we cannot distinguish
whether the transaction has catalog changes only by checking the COMMIT
record. It doesn't have the information on which (sub) transaction has
catalog changes, and XACT_XINFO_HAS_INVALS doesn't necessarily indicate
that the transaction has catalog change. But that won't be a problem since
we use snapshot built during decoding only to read system catalogs.
On the master branch, we took a more future-proof approach by writing
catalog modifying transactions to the serialized snapshot which avoids the
above false positive. But we cannot backpatch it because of a change in
the SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
fmgr_sql must make expanded-datum arguments read-only, because
it's possible that the function body will pass the argument to
more than one callee function. If one of those functions takes
the datum's R/W property as license to scribble on it, then later
callees will see an unexpected value, leading to wrong answers.
From a performance standpoint, it'd be nice to skip this in the
common case that the argument value is passed to only one callee.
However, detecting that seems fairly hard, and certainly not
something that I care to attempt in a back-patched bug fix.
Per report from Adam Mackler. This has been broken since we
invented expanded datums, so back-patch to all supported branches.
Discussion: https://postgr.es/m/WScDU5qfoZ7PB2gXwNqwGGgDPmWzz08VdydcPFLhOwUKZcdWbblbo-0Lku-qhuEiZoXJ82jpiQU4hOjOcrevYEDeoAvz6nR0IU4IHhXnaCA=@mackler.email
Discussion: https://postgr.es/m/187436.1660143060@sss.pgh.pa.us
Per buildfarm, the output order of \dx+ isn't consistent across
locales. Apply NO_LOCALE to force C locale. There might be a
more localized way, but I'm not seeing it offhand, and anyway
there is nothing in this test module that particularly cares
about locales.
Security: CVE-2022-2625
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
RelationCopyStorageUsingBuffer thought it could skip copying
empty pages, but of course that does not work at all, because
subsequent blocks will be out of place.
Also fix it to acquire share lock on the source buffer. It *might*
be safe to not do that, but it's not very certain, and I don't think
this code deserves any benefit of the doubt.
Dilip Kumar, per complaint from me
Discussion: https://postgr.es/m/3679800.1659654066@sss.pgh.pa.us
Commit 59be1c942a already tried to make
src/test/recovery/t/033_replay_tsp_drops more reliable, but it wasn't
enough. Try to improve on that by making this use of a replication slot
to be more like others. Also, don't drop the slot.
Make a few other stylistic changes while at it. It's still quite slow,
which is another thing that we need to fix in this script.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/349302.1659191875@sss.pgh.pa.us
On closer inspection, mcv.c isn't as broken for ScalarArrayOpExpr
as I thought. The Var-on-right issue is real enough, but actually
it does cope fine with a NULL array constant --- I was misled by
an XXX comment suggesting it didn't. Undo that part of the code
change, and replace the XXX comment with something less misleading.
Since v14, the extended stats machinery will try to estimate for
otherwise-unsupported boolean expressions if they match an expression
available from an extended stats object. mcv.c did not get the memo
about this, and would spit up with "unknown clause type". Fortunately
the case is easy to handle, since we can expect the expression yields
boolean.
While here, replace some not-terribly-on-point assertions with
simpler runtime tests for lookup failure. That seems appropriate
so that we get an elog not a crash if we somehow get to the new
it-should-be-a-bool-expression code with a subexpression that
doesn't match any stats column.
Per report from Danny Shemesh. Thanks to Justin Pryzby for
preliminary investigation.
Discussion: https://postgr.es/m/CAFZC=QqD6=27wQPOW1pbRa98KPyuyn+7cL_Ay_Ck-roZV84vHg@mail.gmail.com
statext_is_compatible_clause_internal() checked that the arguments
of a ScalarArrayOpExpr are one Var and one Const, but it would allow
cases where the Const was on the left. Subsequent uses of the clause
are not expecting that and would suffer assertion failures or core
dumps. mcv.c also had not bothered to cope with the case of a NULL
array constant, which seems really unacceptably sloppy of somebody.
(Although our tools failed us there too, since AFAIK neither Coverity
nor any compiler warned of the obvious use-of-uninitialized-variable
condition.) It seems best to handle that by having
statext_is_compatible_clause_internal() reject it.
Noted while fixing bug #17570. Back-patch to v13 where the
extended stats code grew some awareness of ScalarArrayOpExpr.
Commit a4d75c86b improved the extended-stats logic to allow extended
stats to be collected on expressions not just bare Vars. To apply
such stats, we first verify that the user has permissions to read all
columns used in the stats. (If not, the query will likely fail at
runtime, but the planner ought not do so.) That had to get extended
to check permissions of columns appearing within such expressions,
but the code for that was completely wrong: it applied pull_varattnos
to the wrong pointer, leading to "unrecognized node type" failures.
Furthermore, although you couldn't get to this because of that bug,
it failed to account for the attnum offset applied by pull_varattnos.
This escaped recognition so far because the code in question is not
reached when the user has whole-table SELECT privilege (which is the
common case), and because only subexpressions not specially handled
by statext_is_compatible_clause_internal() are at risk.
I think a large part of the reason for this bug is under-documentation
of what statext_is_compatible_clause() is doing and what its arguments
are, so do some work on the comments to try to improve that.
Per bug #17570 from Alexander Kozhemyakin. Patch by Richard Guo;
comments and other cosmetic improvements by me. (Thanks also to
Japin Li for diagnosis.) Back-patch to v14 where the bug came in.
Discussion: https://postgr.es/m/17570-f2f2e0f4bccf0965@postgresql.org
Having additional triggers in a test table made the ORDER BY clauses in
old queries underspecified. Add another column there for stability.
Per sporadic buildfarm pink.
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
The test is proving to be unreliable in the buildfarm, and we neither
agree on how best to fix it nor have time to do so before the upcoming
release. So for now, put things back to the way they were before commit
d498e052b4.
Discussion: http://postgr.es/m/3628089.1659640252@sss.pgh.pa.us
Adjusting this function was overlooked in commit 94aa7cc5f. The only
visible symptom (so far) is that INSERT ... ON CONFLICT could go into
an endless loop when inserting a null that has a conflict.
Richard Guo and Tom Lane, per bug #17558 from Andrew Kesper
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
Ordinarily the functions called in this loop ought to have plenty
of CFIs themselves; but we've now seen a case where no such CFI is
reached, making the loop uninterruptible. Even though that's from
a recently-introduced bug, it seems prudent to install a CFI at
the loop level in all branches.
Per discussion of bug #17558 from Andrew Kesper (an actual fix for
that bug will follow).
Discussion: https://postgr.es/m/17558-3f6599ffcf52fd4a@postgresql.org
Remove the test case added by commit fac1b470a, which never actually
worked to expose the problem it claimed to test. Replace it with
a case that does expose the problem, and also covers the SRF-not-
at-the-top deficiency repaired in 1aa8dad41.
Richard Guo, with some editorialization by me
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
Commit fac1b470a thought we could check for set-returning functions
by testing only the top-level node in an expression tree. This is
wrong in itself, and to make matters worse it encouraged others
to make the same mistake, by exporting tlist.c's special-purpose
IS_SRF_CALL() as a widely-visible macro. I can't find any evidence
that anyone's taken the bait, but it was only a matter of time.
Use expression_returns_set() instead, and stuff the IS_SRF_CALL()
genie back in its bottle, this time with a warning label. I also
added a couple of cross-reference comments.
After a fair amount of fooling around, I've despaired of making
a robust test case that exposes the bug reliably, so no test case
here. (Note that the test case added by fac1b470a is itself
broken, in that it doesn't notice if you remove the code change.
The repro given by the bug submitter currently doesn't fail either
in v15 or HEAD, though I suspect that may indicate an unrelated bug.)
Per bug #17564 from Martijn van Oosterhout. Back-patch to v13,
as the faulty patch was.
Discussion: https://postgr.es/m/17564-c7472c2f90ef2da3@postgresql.org
The sto_using_cursor and sto_using_select tests were coded to exercise
every permutation of their test steps, but AFAICS there is no value in
exercising more than one. This matters because each permutation costs
about six seconds, thanks to the "pg_sleep(6)". Perhaps we could
reduce that, but the useless permutations seem worth getting rid of
in any case. (Note that sto_using_hash_index got it right already.)
While here, clean up some other sloppiness such as an unused table.
This doesn't make too much difference in interactive testing, since the
wasted time is typically masked by parallelization with other tests.
However, the buildfarm runs this as a serial step, which means we can
expect to shave ~40 seconds from every buildfarm run. That makes it
worth back-patching.
Discussion: https://postgr.es/m/2515192.1659454702@sss.pgh.pa.us
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
I thought commit fd96d14d9 had plugged all the holes of this sort,
but no, function RTEs could produce oversize tuples too, either
via long coldeflists or just from multiple functions in one RTE.
(I'm pretty sure the other variants of base RTEs aren't a problem,
because they ultimately refer to either a table or a sub-SELECT,
whose widths are enforced elsewhere. But we explicitly allow join
RTEs to be overwidth, as long as you don't try to form their
tuple result.)
Per further discussion of bug #17561. As before, patch all branches.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
errno was not reported correctly after attempting to clone a file,
leading to incorrect error reports. While scanning through the code, I
have not noticed any similar mistakes.
Error introduced in 3a769d8.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220731134135.GY15006@telsasoft.com
Backpatch-through: 12
In the short time this function has existed, it's already proven to be
a nontrivial maintenance burden, since it has to be updated whenever a
node tag is added or removed. Although in principle we could now
automate that, I see little justification for having such functionality
here at all. The function is only being applied to utility statements,
for which we already have infrastructure for obtaining string names.
Moreover, that infrastructure produces already-familiar-to-users names,
unlike nodetag_to_string().
So, remove this function and use the existing infrastructure instead.
That saves over a thousand lines of largely-unreachable code.
Back-patch to v15 where this code came in. Although it seems unlikely
that v15's nodetag list will change anymore, we might as well keep the
two branches looking and acting alike; otherwise back-patching any
test-results changes in this area will be painful.
Discussion: https://postgr.es/m/843818.1659218928@sss.pgh.pa.us
The code tried to access ARR_DIMS(v)[0] and ARR_LBOUND(v)[0]
whether or not those values exist. This made the range check
on the "n" argument unstable --- it might or might not fail, and
if it did it would report garbage for the allowed upper limit.
These bogus accesses would probably annoy Valgrind, and if you
were very unlucky even lead to SIGSEGV.
Report and fix by Martin Kalcher. Back-patch to v14 where this
function was added.
Discussion: https://postgr.es/m/baaeb413-b8a8-4656-5757-ef347e5ec11f@aboutsource.net
Two callers of generate_useful_gather_paths were testing the wrong
thing when deciding whether to call that function: they checked for
being at the top of the current join subproblem, rather than being at
the actual top join. This'd result in failing to construct parallel
paths for a sub-join for which they might be useful.
While set_rel_pathlist() isn't actively broken, it seems best to
make its identical-in-intention test for this be like the other two.
This has been wrong all along, but given the lack of field complaints
I'm hesitant to back-patch into stable branches; we usually prefer
to avoid non-bug-fix changes in plan choices in minor releases.
It seems not too late for v15 though.
Richard Guo, reviewed by Antonin Houska and Tom Lane
Discussion: https://postgr.es/m/CAMbWs4-mH8Zf87-w+3P2J=nJB+5OyicO28ia9q_9o=Lamf_VHg@mail.gmail.com
Instead of using command_ok() to run psql, use safe_psql(). wrasse
isn't happy, and it be because of failure to pass -X to the psql
invocation, which safe_psql() will do automatically.
Since safe_psql() returns standard output instead of writing it to
a file, this requires some changes to the incantation for running
'diff'.
Test against the 'regression' database rather than 'postgres' so
we test more than just one table. That also means we need to record
the horizons later, after the test does "VACUUM FULL pg_largeobject".
Add an ORDER BY clause to the horizon query for stability.
Patch by me, reviewed by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoaGBbpzgu3=du1f9zDUbkfycO0y=_uWrLFy=KKEqXWeLQ@mail.gmail.com
The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
Backpatch to all live branches like the original.
We must issue the TRUNCATE command first and update relfrozenxid
and relminmxid afterward; otherwise, TRUNCATE overwrites the
previously-set values.
Add a test case like I should have done the first time.
Per buildfarm report from TestUpgradeXversion.pm, by way of Tom
Lane.
A RowExpr with more than MaxTupleAttributeNumber columns would fail at
execution anyway, since we cannot form a tuple datum with more than that
many columns. While heap_form_tuple() has a check for too many columns,
it emerges that there are some intermediate bits of code that don't
check and can be driven to failure with sufficiently many columns.
Checking this at parse time seems like the most appropriate place to
install a defense, since we already check SELECT list length there.
While at it, make the SELECT-list-length error use the same errcode
(TOO_MANY_COLUMNS) as heap_form_tuple does, rather than the generic
PROGRAM_LIMIT_EXCEEDED.
Per bug #17561 from Egor Chindyaskin. The given test case crashes
in all supported branches (and probably a lot further back),
so patch all.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
The earlier commit used pg_class.relfilenode where it should have
used pg_class.oid. This could lead to emitting an UPDATE statement
into the dump that would update nothing (or the wrong thing) when
executed in the new cluster, resulting in relfrozenxid and
relminmxid being improperly carried forward for pg_largeobject.
Noticed by Dilip Kumar.
Discussion: http://postgr.es/m/CAFiTN-ty1Gzs6stk2vt9BJiq0m0hzf=aPnh3a-4Z3Tk5GzoENw@mail.gmail.com
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Commit 9a974cbcba arranged to preserve
the relfilenode of user tables across pg_upgrade, but failed to notice
that pg_upgrade treats pg_largeobject as a user table and thus it needs
the same treatment. Otherwise, large objects will appear to vanish
after a pg_upgrade.
Commit d498e052b4 fixed this problem
by teaching pg_dump to UPDATE pg_class.relfilenode for pg_largeobject
and its index. However, because an UPDATE on the catalog rows doesn't
change anything on disk, this can leave stray files behind in the new
cluster. They will normally be empty, but it's a little bit untidy.
Hence, this commit arranges to do the same thing using DDL. Specifically,
it makes TRUNCATE work for the pg_largeobject catalog when in
binary-upgrade mode, and it then uses that command in binary-upgrade
dumps as a way of setting pg_class.relfilenode for pg_largeobject and
its index. That way, the old files are removed from the new cluster.
Discussion: http://postgr.es/m/CA+TgmoYYMXGUJO5GZk1-MByJGu_bB8CbOL6GJQC8=Bzt6x6vDg@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
On Windows with MSVC, get_dirent_type() was recently made to return
DT_LNK for junction points by commit 9d3444dc, which fixed some
defective dirent.c code.
On Windows with Cygwin, get_dirent_type() already worked for symlinks,
as it does on POSIX systems, because Cygwin has its own fake symlinks
that behave like POSIX (on closer inspection, Cygwin's dirent has the
BSD d_type extension but it's probably always DT_UNKNOWN, so we fall
back to lstat(), which understands Cygwin symlinks with S_ISLNK()).
On Windows with MinGW/MSYS, we need extra code, because the MinGW
runtime has its own readdir() without d_type, and the lstat()-based
fallback has no knowledge of our convention for treating junctions as
symlinks.
Back-patch to 14, where get_dirent_type() landed.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/b9ddf605-6b36-f90d-7c30-7b3e95c46276%40dunslane.net
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
Since a2c8499, HbaFileName (default pg_hba.conf) was getting used
instead of IdentFileName (default pg_ident.conf) as the parent file to
use as reference when parsing the contents of pg_ident.conf, with
pg_ident.conf correctly opened, when feeding this information to
pg_ident_file_mappings. This had two consequences:
- On an I/O error when reading pg_ident.conf, the user would get an
ERROR message referring to pg_hba.conf and not pg_ident.conf.
- When reading an external file with a relative path using '@' in
pg_ident.conf, the directory used to look at the file to load would be
the base directory of pg_hba.conf rather than the one of pg_ident.conf,
leading to errors in pg_ident_file_mappings inconsistent with what gets
loaded at startup when pg_ident.conf and pg_hba.conf are located in
different directories.
This error only impacted the SQL view pg_ident_file_mappings that uses a
logic new to v15 to fill the view with the parsed information, not the
code paths loading these authentication files at startup.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220726050402.vsr6fmz7rsgpmdz3@jrouhaud
Backpatch-through: 15
Previously we did this after InitPostgres, at a somewhat randomly chosen
place within PostgresMain. However, since commit a0ffa885e doing this
outside a transaction can cause a crash, if we need to check permissions
while replacing a placeholder GUC. (Besides which, a preloaded library
could itself want to do database access within _PG_init.)
To avoid needing an additional transaction start/end in every session,
move the process_session_preload_libraries call to within InitPostgres's
transaction. That requires teaching the code not to call it when
InitPostgres is called from somewhere other than PostgresMain, since
we don't want session_preload_libraries to affect background workers.
The most future-proof solution here seems to be to add an additional
flag parameter to InitPostgres; fortunately, we're not yet very worried
about API stability for v15.
Doing this also exposed the fact that we're currently honoring
session_preload_libraries in walsenders, even those not connected to
any database. This seems, at minimum, a POLA violation: walsenders
are not interactive sessions. Let's stop doing that.
(All these comments also apply to local_preload_libraries, of course.)
Per report from Gurjeet Singh (thanks also to Nathan Bossart and Kyotaro
Horiguchi for review). Backpatch to v15 where a0ffa885e came in.
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
It incorrectly used GetBufferDescriptor instead of
GetLocalBufferDescriptor, causing it to not find the correct buffer in
most cases, and performing an out-of-bounds memory read in the corner
case that temp_buffers > shared_buffers.
It also bumped the usage-count on the buffer, even if it was
previously pinned. That won't lead to crashes or incorrect results,
but it's different from what the shared-buffer case does, and
different from the usual code in LocalBufferAlloc. Fix that too, and
make the code ordering match LocalBufferAlloc() more closely, so that
it's easier to verify that it's doing the same thing.
Currently, ReadRecentBuffer() is only used with non-temp relations, in
WAL redo, so the broken code is currently dead code. However, it could
be used by extensions.
Backpatch-through: 14
Discussion: https://www.postgresql.org/message-id/2d74b46f-27c9-fb31-7f99-327a87184cc0%40iki.fi
Reviewed-by: Thomas Munro, Zhang Mingli, Richard Guo
Commit e2f65f425 added contrib/pg_prewarm to the prerequisites for
running the src/test/recovery suite, but did not bother to update
the documentation about that.
We've long held the minimum at 3.80, but that's required more than
one workaround. Commit 0f39b70a6 broke it again, because it turns
out that exporting a target-specific variable didn't work in 3.80.
Considering that 3.81 is now old enough to get a driver's license,
and that the only remaining buildfarm member testing 3.80 (prairiedog)
is likely to be retired soon, let's just stop supporting 3.80.
Adjust docs and Makefile.global's minimum-version check to match.
There are a couple of comments in the Makefiles suggesting that
random things could be done differently after we desupport 3.80,
but I couldn't get excited about changing any of them right now.
Back-patch to v15, as 0f39b70a6 was.
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
The common recipe when TAP tests are disabled doesn't work, because the
libpq-specific recipe wants to define the PATH environment variable, so
the starting '@' is misinterpreted as part of the command instead of
silencing said command.
Fix by setting the environment variable in a way that doesn't interfere
with the recipe.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
The dependency logic failed to register a column-level dependency
when a view or rule contains a reference to a specific column of
the result of a function-returning-composite. That meant you could
drop the column from the composite type, causing trouble for future
executions of the view. We've known about this for years, but never
summoned the energy to actually fix it, instead installing various
low-level defenses to prevent crashing on references to dropped columns.
We had to do that to plug the hole in stable branches, where there might
be pre-existing broken references; but let's fix the root cause today.
To do that, add some logic (borrowed from get_rte_attribute_is_dropped)
to find_expr_references_walker, to check whether a Var referencing an
RTE_FUNCTION RTE is referencing a column of a composite type, and if
so add the proper dependency.
However ... it seems mighty unwise to remove said low-level defenses,
since there could be other bugs now or in the future that allow
reaching them. By the same token, letting those defenses go untested
seems unwise. Hence, rather than just dropping the associated test
cases, hack them to continue working by the expedient of manually
dropping the pg_depend entries that this fix installs.
Back-patch into v15. I don't want to risk changing this behavior
in stable branches, but it seems not too late for v15. (Since
we have already forced initdb for beta3, we can be sure that all
production v15 installations will have these added dependencies.)
Discussion: https://postgr.es/m/182492.1658431155@sss.pgh.pa.us
Commit c6f2f016 added an explicit check for a Windows "junction point".
That turned out to be needed only because get_dirent_type() was busted
on Windows. It's been fixed by commit 9d3444dc, so remove it.
Add a TAP-test to demonstrate that in-place tablespaces are copied by
pg_basebackup. This exercises the codepath that would fail before
c6f2f016 on Windows, and shows that it still doesn't fail now that we're
using get_dirent_type() on both Windows and Unix.
Back-patch to 15, where in-place tablespaces arrived and caused this
problem (ie directories where previously only symlinks were expected).
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
Commit 87e6ed7c8 added code that intended to report Windows "junction
points" as DT_LNK (the same way we report symlinks on Unix). Windows
junction points are *also* directories according to the Windows
attributes API, and we were reporting them as as DT_DIR. Change the
order we check the attribute flags, to prioritize DT_LNK.
If at some point we start using Windows' recently added real symlinks
and need to distinguish them from junction points, we may need to
rethink this, but for now this continues the tradition of wrapper
functions that treat junction points as symlinks.
Back-patch to 14, where get_dirent_type() landed.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
Discussion: https://postgr.es/m/20220721111751.x7hod2xgrd76xr5c%40alvherre.pgsql
Due to lack of concern for the case in the dependency code, it's
possible to drop a column of a composite type even though stored
queries have references to the dropped column via functions-in-FROM
that return the composite type. There are "soft" references,
namely FROM-clause aliases for such columns, and "hard" references,
that is actual Vars referring to them. The right fix for hard
references is to add dependencies preventing the drop; something
we've known for many years and not done (and this commit still doesn't
address it). A "soft" reference shouldn't prevent a drop though.
We've been around on this before (cf. 9b35ddce9, 2c4debbd0), but
nobody had noticed that the current behavior can result in dump/reload
failures, because ruleutils.c can print more column aliases than the
underlying composite type now has. So we need to rejigger the
column-alias-handling code to treat such columns as dropped and not
print aliases for them.
Rather than writing new code for this, I used expandRTE() which already
knows how to figure out which function result columns are dropped.
I'd initially thought maybe we could use expandRTE() in all cases, but
that fails for EXPLAIN's purposes, because the planner strips a lot of
RTE infrastructure that expandRTE() needs. So this patch just uses it
for unplanned function RTEs and otherwise does things the old way.
If there is a hard reference (Var), then removing the column alias
causes us to fail to print the Var, since there's no longer a name
to print. Failing seems less desirable than printing a made-up
name, so I made it print "?dropped?column?" instead.
Per report from Timo Stolz. Back-patch to all supported branches.
Discussion: https://postgr.es/m/5c91267e-3b6d-5795-189c-d15a55d61dbb@nullachtvierzehn.de
Most of these have been introduced in d2d3547 with the new pattern
validation logic, and would leak memory worth an amount of one
PQExpBuffer each time (as of 256 bytes at minimum, possibly more).
Most of the patch has been written by Tang Haiying, with a few tweaks
coming from Álvaro Herrera.
Reported-by: Tang Haiying
Author: Tang Haiying, Álvaro Herrera
Reviewed-by: Mark Dilger, Andres Freund, Álvaro Herrera, Tom Lane, Japin
Li, Michael Paquier, Junwang Zhao
Backpatch-through: 15
Without processing shared_preload_libraries, it's impossible to
recover if custom WAL resource managers are needed. It may also pose a
problem running VACUUM on a table with a custom AM, if the module
implementing the AM is expecting to be loaded by
shared_preload_libraries.
The reason this wasn't done before was just the general principle to
do fewer things in single-user mode. But it's easy enough to just set
shared_preload_libraries to empty, for the same effect.
Discussion: https://postgr.es/m/9decc18a42634f8a2f15c97a385a0f51a752f396.camel%40j-davis.com
Reviewed-by: Tom Lane, Andres Freund
Backpatch-through: 15
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
Multiple non-exclusive backups are able to be run conrrently in different
sessions. But, in the same session, only one non-exclusive backup can be
run at the same moment. If pg_backup_start (pg_start_backup in v14 or before)
is called in the middle of another non-exclusive backup in the same session,
an error is thrown.
However, previously, in logical replication walsender mode, even if that
walsender session had already called pg_backup_start and started
a non-exclusive backup, it could execute BASE_BACKUP command and
start another non-exclusive backup. Which caused subsequent pg_backup_stop
to throw an error because BASE_BACKUP unexpectedly reset the session state
marked by pg_backup_start.
This commit prevents BASE_BACKUP command in the middle of another
non-exclusive backup in the same session.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
We allow users to set the values of not-yet-loaded extension GUCs,
remembering those values in "placeholder" GUC entries. When/if
the extension is loaded later in the session, we need to verify that
the user had permissions to set the GUC. That was done correctly
before commit a0ffa885e, but as of that commit, we'd check the
permissions of the active role when the LOAD happens, not the role
that had set the value. (This'd be a security bug if it had made it
into a released version.)
In principle this is simple enough to fix: we just need to remember
the exact role OID that set each GUC value, and use that not
GetUserID() when verifying permissions. Maintaining that data in
the guc.c data structures is slightly tedious, but fortunately it's
all basically just copy-n-paste of the logic for tracking the
GucSource of each setting, as we were already doing.
Another oversight is that validate_option_array_item() hadn't
been taught to check for granted GUC privileges. This appears
to manifest only in that ALTER ROLE/DATABASE RESET ALL will
fail to reset settings that the user should be allowed to reset.
Patch by myself and Nathan Bossart, per report from Nathan Bossart.
Back-patch to v15 where the faulty code came in.
Discussion: https://postgr.es/m/20220706224727.GA2158260@nathanxps13
This fixes problems on windows when logging collector is used in a service,
failing with:
FATAL: could not redirect stderr: Bad file descriptor
This is triggered by 76e38b37a5. The problem is that STDOUT/STDERR_FILENO
aren't defined on windows, which lead us to use _fileno(stdout) etc, but that
doesn't work if stdout/stderr are closed.
Author: Andres Freund <andres@anarazel.de>
Reported-By: Sandeep Thakkar <sandeep.thakkar@enterprisedb.com>
Message-Id: 20220520164558.ozb7lm6unakqzezi@alap3.anarazel.de (on pgsql-packagers)
Backpatch: 15-, where 76e38b37a5 came in
Because they are not available we've used _fileno(stdin) in some places, but
that doesn't reliably work, because stdin might be closed. This is the
prerequisite of the subsequent commit, fixing a failure introduced in
76e38b37a5.
Author: Andres Freund <andres@anarazel.de>
Reported-By: Sandeep Thakkar <sandeep.thakkar@enterprisedb.com>
Message-Id: 20220520164558.ozb7lm6unakqzezi@alap3.anarazel.de (on pgsql-packagers)
Backpatch: 15-, where 76e38b37a5 came in
A code comment said that the standard does not define a number for
ERRCODE_SQL_JSON_ITEM_CANNOT_BE_CAST_TO_TARGET_TYPE, but this was
fixed in a later draft version of the standard, so use that number
now.
The patch that added regcollation doesn't seem to have been too
thorough about supporting it everywhere that other reg* types
are supported. Fix that. (The find_expr_references omission
is moderately serious, since it could result in missing expression
dependencies. The others are less exciting.)
Noted while fixing bug #17483. Back-patch to v13 where
regcollation was added.
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
Noticed while working in this area. This code was introduced in PG15,
which is still in beta, so backpatch to there for consistency.
Backpatch-through: 15
On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).
Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).
On further reflection, that was not a great choice for at least two
reasons:
1. If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.
2. If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates. posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.
Therefore, for now, we'll simply block most signals to guarantee
progress. SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate. For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.
Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql
Commit 054325c5ee created a memory leak in PQsendQueryInternal in case
an error occurs while sending the message. Repair.
Backpatch to 14, like that commit. Reported by Coverity.
When checking for interleaved partitions, we mark the partition as
interleaved when;
1. we find an earlier partition index when looping over the
sorted-by-Datum indexes[] array, or;
2. we find that the NULL partition allows some non-NULL Datum value.
In the code, as it was written in db632fbca we'll continue to check for
case 2 when we've already marked the partition as interleaved for case 1.
Here we make it so we don't bother marking the partition as interleaved
for case 2 when it's already been marked due to case 1.
Really all this saves is a useless call to bms_add_member(), but since
this code is new to PG15, it seems worth fixing it now to save anyone the
trouble of complaining at some time in the future. We have the
opportunity to improve this now before PG15 is out. This might ease some
future back-patching pain.
Per report and patch by Zhihong Yu. However, I slightly revised the
comments and altered the bms_add_member() code to match in both locations.
We already know that index is equal to boundinfo->null_index from the if
condition.
Author: Zhihong Yu
Discussion: https://postgr.es/m/CALNJ-vQbZR0pYxz9zQ5bqXVcwtGgNgVupeEpNT65HZ+yWZnc4g@mail.gmail.com
Backpatch-through: 15, same as db632fbca.
There are a few things that we could do a little better within
get_cheapest_group_keys_order():
1. We should be using list_free() rather than pfree() on a List.
2. We should use for_each_from() instead of manually coding a for loop to
skip the first n elements of a List
3. list_truncate(list_copy(...), n) is not a great way to copy the first n
elements of a list. Let's invent list_copy_head() for that. That way we
don't need to copy the entire list just to truncate it directly
afterwards.
4. We can simplify finding the cheapest cost by setting the cheapest cost
variable to DBL_MAX. That allows us to skip special-casing the initial
iteration of the loop.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvrGyL3ft8waEkncG9y5HDMu5TFFJB1paoTC8zi9YK97Nw@mail.gmail.com
Backpatch-through: 15, where get_cheapest_group_keys_order was added.
Justin Pryzby reported that some scenarios could cause gathering
of extended statistics to spend many seconds in an un-cancelable
qsort() operation. To fix, invent qsort_interruptible(), which is
just like qsort_arg() except that it will also do CHECK_FOR_INTERRUPTS
every so often. This bloats the backend by a couple of kB, which
seems like a good investment. (We considered just enabling
CHECK_FOR_INTERRUPTS in the existing qsort and qsort_arg functions,
but there are some callers for which that'd demonstrably be unsafe.
Opt-in seems like a better way.)
For now, just apply qsort_interruptible() in statistics collection.
There's probably more places where it could be useful, but we can
always change other call sites as we find problems.
Back-patch to v14. Before that we didn't have extended stats on
expressions, so that the problem was less severe. Also, this patch
depends on the sort_template infrastructure introduced in v14.
Tom Lane and Justin Pryzby
Discussion: https://postgr.es/m/20220509000108.GQ28830@telsasoft.com
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
This addresses two issues in the tests of test_oat_hooks:
- The role regress_test_user was being left behind, preventing the test
to succeed on repeated runs. It makes sense to leave some objects
behind to have more coverage for pg_upgrade (as does test_pg_dump), but
the role dropped here does not own any objects so there is no reason to
keep it.
- GRANT SET ON PARAMETER is issued, creating an entry in
pg_parameter_acl without cleaning up the entry created. This causes
an overlap with unsafe_tests as both use work_mem, making the latter
fail. This commit adds an extra REVOKE SET ON PARAMETER to clean the
contents of pg_parameter_acl, switching to maintenance_work_mem rather
than work_mem to avoid an overlap between both tests.
The tests of test_oat_hooks cannot use installcheck yet as these are
proving to be unstable with caching and the namespace search hooks, so
the issues fixed here cannot be reached yet, but they would be once the
hook issue is addressed and installcheck is allowed again in
test_oat_hooks.
Discussion: https://postgr.es/m/YrpVkADAY0knF6vM@paquier.xyz
Backpatch-through: 15
When you hit ^C, the terminal driver in Unix-like systems echoes "^C" as
well as sending an interrupt signal (depending on stty settings). At
least libedit (but maybe also libreadline) is then confused about the
current cursor location, and corrupts the display if you try to scroll
back. Fix, by moving to a new line before the next prompt is displayed.
Back-patch to all supported released.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3278793.1626198638%40sss.pgh.pa.us
Commit 9a974cbcba did this for user
tables, but pg_upgrade treats pg_largeobject as a user table, and so
needs the same treatment. Without this fix, if you rewrite the
pg_largeobject table and then perform an upgrade with pg_upgrade, the
table will apparently be empty on the new cluster, while all of your
objects will end up with an orphaned file.
With this fix, instead of the old cluster's pg_largeobject files ending
up orphaned, the original files fro the new cluster do. That's mostly
harmless because we expect the table to be empty, but we might want
to arrange to remove the as part of the upgrade. Since we're still
debating the best way of doing that, I (rhaas) have decided to postpone
dealing with that problem and get the basic fix committed.
Justin Pryzby, reviewed by Shruthi Gowda and by me.
Discussion: http://postgr.es/m/20220701231413.GI13040@telsasoft.com
These are documented to be the allowed types for the RETURNING clause,
but the restriction was not being enforced, which caused a segfault if
another type was specified. Add some testing for this.
Per report from a.kozhemyakin
Backpatch to release 15.
When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.
If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.
In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.
Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com
By convention, the tab-complete subscription parameters are listed in the
COMPLETE_WITH lists in alphabetical order, but when the "disable_on_error"
parameter was introduced this was not done.
This patch just tidies that up.
Reported-by: Peter Smith
Author: Peter Smith
Reviewed-by: Euler Taveira, Takamichi Osumi
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PucvKZgg_eJzUW--iL6DXHg1Jwj6F09tQziE3kUF67uLg@mail.gmail.com
That comment might have been true at some point during development, but
definitely isn't anymore.
Reported-By: Melanie Plageman <melanieplageman@gmail.com>
Backpatch: 15-
We hadn't noticed this because it's dead code: there is no
situation where we read raw parse trees from text format.
So maybe the right fix is to remove the function altogether,
but I'll forbear for now; it's not the only dead code in
readfuncs.c, I think.
Noted while comparing existing code to the results of
Peter's auto-generation script.
40af10b57 changed things so we make use of a generation memory context for
storing tuples to be sorted by tuplesort.c. That change does not play
nicely with the changes made in 9f03ca915 (back in 2014). That commit
changed things so that index_form_tuple() is called while switched into
the tuplestore's tuplecontext. In order to fetch the tuple from the index,
index_form_tuple() must do various memory allocations which are unrelated
to the storage of the final returned tuple. Although all of these
allocations are pfree'd, the fact that we now use a generation context
means that the memory for these pfree'd allocations won't be used again by
any other allocation due to generation.c's lack of freelists. This could
result in sorts used for building indexes exceeding maintenance_work_mem
by a very large amount.
Here we fix it so we no longer allocate anything apart from the tuple
itself into the generation context by adding a new version of
index_form_tuple named index_form_tuple_context, which can be called to
specify the MemoryContext to allocate the tuple into.
Discussion: https://postgr.es/m/CAApHDvrHQkiFRHiGiAS-LMOvJN-eK-s762=tVzBz8ZqUea-a_A@mail.gmail.com
Backpatch-through: 15, where 40af10b57 was added.
There's no reason anymore to only drop subscription stats if associated with a
slot, now that stats drops are transactional. Additionally, the comment
referring to autovacuum cleaning up stats was clearly outdated.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAwiby3HeJE7vJe16Gr75RFfJ640dyHqvsiUhyKJTXPtw@mail.gmail.com
Backpatch: 15-
50e17ad28 increased the size of ExprEvalStep from 64 bytes up to 88 bytes.
Lots of effort was spent during the development of the current expression
evaluation code to make an instance of this struct as small as possible.
Making this struct larger than needed reduces CPU cache efficiency during
expression evaluation which causes noticeable slowdowns during query
execution.
In order to reduce the size of the struct, here we remove the fn_addr
field. The values from this field can be obtained via fcinfo, just with
some extra pointer dereferencing. The extra indirection does not seem to
cause any noticeable slowdowns.
Various other fields have been moved into the ScalarArrayOpExprHashTable
struct. These fields are only used when the ScalarArrayOpExprHashTable
pointer has already been dereferenced, so no additional pointer
dereferences occur for these. Here we also make hash_fcinfo_data the last
field in ScalarArrayOpExprHashTable so that we can avoid a further pointer
dereference to get the FunctionCallInfoBaseData. This also saves a call to
palloc().
50e17ad28 was added in 14, but it's too late to adjust the size of the
ExprEvalStep in that version, so here we just backpatch to 15, which is
currently in beta.
Author: Andres Freund, David Rowley
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Backpatch-through: 15
Previously the timer was enabled whenever there were any pending stats after
executing a statement, just to then be disabled again when not idle
anymore. That lead to an increase in GetCurrentTimestamp() calls from within
timeout.c compared to 14.
To avoid that increase, leave the timer enabled until stats are reported,
rather than until idle. The timer is only disabled once the pending stats have
been reported.
For me this fixes the increase in GetCurrentTimestamp() calls, there now are
fewer calls in 15 than in 14, in the previously slowed down workload.
While at it, also update assertion in pgstat_report_stat() to be more precise.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Backpatch: 15-
The new expression step types increased the size of ExprEvalStep by ~4 for all
types of expression steps, slowing down expression evaluation noticeably. Move
them out of line.
There's other issues with these expression steps, but addressing them is
largely independent of this aspect.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Backpatch: 15-
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
When we changed some built-in functions to use anycompatiblearray
instead of anyarray, we created a dump/restore hazard for user-defined
operators and aggregates relying on those functions: the user objects
have to be modified to change their signatures similarly. This causes
pg_upgrade to fail partway through if the source installation contains
such objects. We generally try to have pg_upgrade detect such hazards
and fail before it does anything exciting, so add logic to detect
this case too.
Back-patch to v14 where the change was made.
Justin Pryzby, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/3383880.QJadu78ljV@vejsadalnx
Noted while comparing existing code to the output of the proposed
patch to automate creation of these functions. Some of the changes
are just cosmetic, but others represent real bugs. I've not
attempted to analyze the user-visible impact.
Back-patch to v15 where this code came in.
Discussion: https://postgr.es/m/1794155.1656984188@sss.pgh.pa.us
We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).
Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery. Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.
The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline". This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received. (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)
This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.
A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com
Several buildfarm members are failing the pg_upgrade test in
REL_15_STABLE, though the identical test is fine in HEAD.
On thorntail it's possible to see that the problem is an
overlength socket path name, and I bet the same is true
on the others.
The normally-started postmasters used in the test are already
set up with short socket directory paths, but we neglected to
tell pg_upgrade itself to do likewise when starting child
postmasters, and indeed it seems to be explicitly selecting
the test directory instead.
Back-patch to v15 where the current test script was introduced.
(The previous script might have the same issue, because I don't
see any use of -s/--socketdir in it either; but we've had no
complaints, so leave it alone for now.)
Discussion: https://postgr.es/m/1410025.1656890531@sss.pgh.pa.us
None of the other bison parsers contains this directive, and it gives
rise to some unfortunate and impenetrable messages, so just remove it.
Backpatch to release 12, where it was introduced.
Per gripe from Erik Rijkers
Discussion: https://postgr.es/m/ba069ce2-a98f-dc70-dc17-2ccf2a9bf7c7@xs4all.nl
After commit 662dbe2c8, psql tab completion didn't conveniently
support the case of "ALTER EXTENSION foo UPDATE". It'd always
add "TO", which is fine if you want to specify a target version
but not if you don't ... and surely the latter is the much more
common case.
To fix, remove "TO" from the initially offered completion; you now
need to press TAB one additional time to get that. We won't try to
duplicate the old behavior of attempting initial completion on the
target version along with TO. It's too squirrelly to get the quoting
right, and this is such an infrequent usage that it doesn't seem worth
expending a lot of effort and special code on.
Noted by Noah Misch. Back-patch to v15.
Discussion: https://postgr.es/m/20220703083217.GB2476530@rfd.leadboat.com
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
POSIX shm_open() can sleep for a long time and fail spuriously because
of contention on an internal lock file on Solaris (and presumably
illumos). Commit 389869af fixed the main problem with this, namely that
we could crash, but it's now clear that "posix" is not a good default.
Therefore, choose "sysv" at initdb time on Solaris and illumos. Other
choices are still available by editing the postgresql.conf file.
Back-patch only to 15, because contention is much less likely further
back, and it doesn't seem like a good idea to change this in released
branches. This should clear up the failures on build farm animal
margay.
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
plpython_unicode_3.out was already removed a long time ago, so it
being listed here was very out of date.
plpython_types_3.out was removed with the Python 2 removal.
TransactionIdIsInProgress had a fast path to return 'false' if the
single-item CLOG cache said that the transaction was known to be
committed. However, that was wrong, because a transaction is first
marked as committed in the CLOG but doesn't become visible to others
until it has removed its XID from the proc array. That could lead to an
error:
ERROR: t_xmin is uncommitted in tuple to be updated
or for an UPDATE to go ahead without blocking, before the previous
UPDATE on the same row was made visible.
The window is usually very short, but synchronous replication makes it
much wider, because the wait for synchronous replica happens in that
window.
Another thing that makes it hard to hit is that it's hard to get such
a commit-in-progress transaction into the single item CLOG cache.
Normally, if you call TransactionIdIsInProgress on such a transaction,
it determines that the XID is in progress without checking the CLOG
and without populating the cache. One way to prime the cache is to
explicitly call pg_xact_status() on the XID. Another way is to use a
lot of subtransactions, so that the subxid cache in the proc array is
overflown, making TransactionIdIsInProgress rely on pg_subtrans and
CLOG checks.
This has been broken ever since it was introduced in 2008, but the race
condition is very hard to hit, especially without synchronous
replication. There were a couple of reports of the error starting from
summer 2021, but no one was able to find the root cause then.
TransactionIdIsKnownCompleted() is now unused. In 'master', remove it,
but I left it in place in backbranches in case it's used by extensions.
Also change pg_xact_status() to check TransactionIdIsInProgress().
Previously, it only checked the CLOG, and returned "committed" before
the transaction was actually made visible to other queries. Note that
this also means that you cannot use pg_xact_status() to reproduce the
bug anymore, even if the code wasn't fixed.
Report and analysis by Konstantin Knizhnik. Patch by Simon Riggs, with
the pg_xact_status() change added by me.
Author: Simon Riggs
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/4da7913d-398c-e2ad-d777-f752cf7f0bbb%40garret.ru
Previously, we encoded both NULL and the first byte at the base address
as 0. That confusion led to the assertion in commit e07d4ddc, which
failed when min_dynamic_shared_memory was used. Give them distinct
encodings, by switching to 1-based offsets for non-NULL pointers. Also
improve macro hygiene in passing (missing/misplaced parentheses), and
remove open-coded access to the raw offset value from freepage.c/h.
Although e07d4ddc was back-patched to 10, the only code that actually
makes use of relptr at the base address arrived in 84b1c63a, so no need
to back-patch further than 14 for now.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220519193839.GT19626%40telsasoft.com
Commit 64919aaab made pull_up_simple_subquery set rte->subquery = NULL
after doing the deed, so that we don't waste cycles copying a
now-useless subquery tree around. This turns out to create a core dump
hazard in range_table_mutator, which supposes that that field is never
NULL. Apparently none of our own code invokes query_tree_mutator or
range_table_mutator on the top Query after subquery pullup; but it
wouldn't be surprising if outside code does, and anyway I'm working
on a v16 patch that will need it.
We can fix this cleanly by just getting rid of the special-case
handling of this field and treating it more like all the rest.
I think the special case might be left over from a time when
QTW_DONT_COPY_QUERY was the default behavior, but that was eons ago.
Thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/545569.1656107045@sss.pgh.pa.us
Since commit 6a2a70a02, we've used signalfd() to receive latch wakeups
when building with WAIT_USE_EPOLL (default for Linux and illumos), and
our traditional self-pipe when falling back to WAIT_USE_POLL (default
for other Unixes with neither epoll() nor kqueue()).
Unexplained hangs and kernel panics have been reported on illumos
systems, apparently linked to this use of signalfd(), leading illumos
users and build farm members to have to define WAIT_USE_POLL explicitly
as a work-around. A bug report exists at
https://www.illumos.org/issues/13700 but no fix is available yet.
Let's provide a way for illumos users to go back to self-pipes with
epoll(), like releases before 14, and choose that by default. No change
for Linux users. To help with development/debugging, macros
WAIT_USE_{EPOLL,POLL} and WAIT_USE_{SIGNALFD,SELF_PIPE} can be defined
explicitly to override the defaults.
Back-patch to 14, where we started using signalfd().
Reported-by: Japin Li <japinli@hotmail.com>
Reported-by: Olaf Bohlen <olbohlen@eenfach.de> (off-list)
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/MEYP282MB1669C8D88F0997354C2313C1B6CA9%40MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
Commit a117cebd63 used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
The ssl test "IPv4 host with CIDR mask does not match" apparently has
a portability problem. Some operating systems don't reject the host
name specification "192.0.2.1/32" as an IP address, and that is then
later rejected when the SNI is set, which results in a different error
message that the test is supposed to verify.
The value of the test has been questioned in the discussion, and it
was suggested that removing it would be an acceptable fix, so that's
what this is doing.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Bug: #17522
Discussion: https://www.postgresql.org/message-id/flat/17522-bfcd5c603b5f4daa%40postgresql.org
The test was not waiting for the subscriber's data synchronization to
happen after refreshing the publication on the subscriber side. This leads
subscriber's apply worker to skip applying the changes on the
corresponding relation which results in a test failure.
Reported-by: Hou Zhijie, as per buildfarm
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716A69496A8E2F2E155DB8D94B59@OS0PR01MB5716.jpnprd01.prod.outlook.com
It has been reported that PL/Tcl built on macOS with GCC >=11 crashes.
The reason is that there is a hash_search() function in the operating
system's libraries, and that ends up being called instead of the one
in postgres. This has something to do with how the linker resolves
references between the various possibilities it has been given, and
somehow something changed that it is now picking that one in this
configuration.
We found that removing the -lc from the link command line fixes this
problem. The -lc was introduced a long time ago in commit
e3909672f1, and we think the reasons
might be obsolete, so we decided that we'll try to just remove it and
see if any problems arise.
Discussion: https://www.postgresql.org/message-id/flat/a78c847a-4f79-9286-be99-e819e9e4139e%40enterprisedb.com
When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.
The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96e6) but we forgot to update the related code that
frees the attribute map.
Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
Tom Lane
Alvaro Herrera
Michael Paquier
Peter Eisentraut
Andres Freund
Etsuro Fujita
David Rowley
Amit Kapila
Jeff Davis
Fujii Masao
Peter Geoghegan
Noah Misch
John Naylor
Daniel Gustafsson
Thomas Munro
Tomas Vondra
Andrew Dunstan
Robert Haas
Heikki Linnakangas
Dean Rasheed