Fixes oversight in commit 2ffa740be9.
Per report from Josh Kupershmidt.
I think we've broken this case before, so let's add a regression test
this time.
The existing code in NUM_numpart_from_char has hard-wired logic to treat
'.' as decimal point, even when we're using a locale-aware format string
and the locale says that '.' is the thousands separator. This results in
clearly wrong answers in FM mode (where we must be able to identify the
decimal point location), as per bug report from Patryk Kordylewski.
Since the initialization code in NUM_prepare_locale already sets up
Np->decimal as either the locale decimal-point string or "." depending
on which decimal-point format code was used, there's really no need to
have any extra logic at all in NUM_numpart_from_char: we only need to
test for a match to Np->decimal.
(Note: AFAICS there's nothing in here that explicitly checks for thousands
separators --- rather, any unmatched character is silently skipped over.
That's pretty bogus IMO but it's not the issue being complained of.)
This is a longstanding bug, but it's possible that some existing apps
are depending on '.' being recognized as decimal point even when using
a D format code. Hence, no back-patch. We should probably list this
as a potential incompatibility in the 9.3 release notes.
This case doesn't normally happen, because the planner usually clamps
all row estimates to at least one row; but I found that it can arise
when dealing with relations excluded by constraints. Without a defense,
estimate_num_groups() can return zero, which leads to divisions by zero
inside the planner as well as assertion failures in the executor.
An alternative fix would be to change set_dummy_rel_pathlist() to make
the size estimate for a dummy relation 1 row instead of 0, but that seemed
pretty ugly; and probably someday we'll want to drop the convention that
the minimum rowcount estimate is 1 row.
Back-patch to 8.4, as the problem can be demonstrated that far back.
Previously this state was represented by whether the view's disk file had
zero or nonzero size, which is problematic for numerous reasons, since it's
breaking a fundamental assumption about heap storage. This was done to
allow unlogged matviews to revert to unpopulated status after a crash
despite our lack of any ability to update catalog entries post-crash.
However, this poses enough risk of future problems that it seems better to
not support unlogged matviews until we can find another way. Accordingly,
revert that choice as well as a number of existing kluges forced by it
in favor of creating a pg_class.relispopulated flag column.
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
This works by extracting trigrams from the given regular expression,
in generally the same spirit as the previously-existing support for
LIKE searches, though of course the details are far more complicated.
Currently, only GIN indexes are supported. We might be able to make
it work with GiST indexes later.
The implementation includes adding API functions to backend/regex/
to provide a view of the search NFA created from a regular expression.
These functions are meant to be generic enough to be supportable in
a standalone version of the regex library, should that ever happen.
Alexander Korotkov, reviewed by Heikki Linnakangas and Tom Lane
The point of turning off track_activities is to avoid this reporting
overhead, but a thinko in commit 4f42b546fd
caused pgstat_report_activity() to perform half of its updates anyway.
Fix that, and also make sure that we clear all the now-disabled fields
when transitioning to the non-reporting state.
An oversight in commit e710b65c1c allowed
database names beginning with "-" to be treated as though they were secure
command-line switches; and this switch processing occurs before client
authentication, so that even an unprivileged remote attacker could exploit
the bug, needing only connectivity to the postmaster's port. Assorted
exploits for this are possible, some requiring a valid database login,
some not. The worst known problem is that the "-r" switch can be invoked
to redirect the process's stderr output, so that subsequent error messages
will be appended to any file the server can write. This can for example be
used to corrupt the server's configuration files, so that it will fail when
next restarted. Complete destruction of database tables is also possible.
Fix by keeping the database name extracted from a startup packet fully
separate from command-line switches, as had already been done with the
user name field.
The Postgres project thanks Mitsumasa Kondo for discovering this bug,
Kyotaro Horiguchi for drafting the fix, and Noah Misch for recognizing
the full extent of the danger.
Security: CVE-2013-1899
The pg_start_backup() and pg_stop_backup() functions checked the privileges
of the initially-authenticated user rather than the current user, which is
wrong. For example, a user-defined index function could successfully call
these functions when executed by ANALYZE within autovacuum. This could
allow an attacker with valid but low-privilege database access to interfere
with creation of routine backups. Reported and fixed by Noah Misch.
Security: CVE-2013-1901
The JSON parser is converted into a recursive descent parser, and
exposed for use by other modules such as extensions. The API provides
hooks for all the significant parser event such as the beginning and end
of objects and arrays, and providing functions to handle these hooks
allows for fairly simple construction of a wide variety of JSON
processing functions. A set of new basic processing functions and
operators is also added, which use this API, including operations to
extract array elements, object fields, get the length of arrays and the
set of keys of a field, deconstruct an object into a set of key/value
pairs, and create records from JSON objects and arrays of objects.
Catalog version bumped.
Andrew Dunstan, with some documentation assistance from Merlin Moncure.
This event takes place just before ddl_command_end, and is fired if and
only if at least one object has been dropped by the command. (For
instance, DROP TABLE IF EXISTS of a table that does not in fact exist
will not lead to such a trigger firing). Commands that drop multiple
objects (such as DROP SCHEMA or DROP OWNED BY) will cause a single event
to fire. Some firings might be surprising, such as
ALTER TABLE DROP COLUMN.
The trigger is fired after the drop has taken place, because that has
been deemed the safest design, to avoid exposing possibly-inconsistent
internal state (system catalogs as well as current transaction) to the
user function code. This means that careful tracking of object
identification is required during the object removal phase.
Like other currently existing events, there is support for tag
filtering.
To support the new event, add a new pg_event_trigger_dropped_objects()
set-returning function, which returns a set of rows comprising the
objects affected by the command. This is to be used within the user
function code, and is mostly modelled after the recently introduced
pg_identify_object() function.
Catalog version bumped due to the new function.
Dimitri Fontaine and Álvaro Herrera
Review by Robert Haas, Tom Lane
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
Prior to 9.3 the commit_delay affected only the current user,
whereas now only the group leader waits while holding the
WALWriteLock. Deliberate or accidental settings to a poor
value could seriously degrade performance for all users.
Privileges may be delegated by SECURITY DEFINER functions
for anyone that needs per-user settings in real situations.
Request for change from Peter Geoghegan
The statistics-based cost estimation patch for range types broke that, by
incorrectly assuming that the left operand of all range oeprators is a
range. That lead to a "type x is not a range type" error. Because it took so
long for anyone to notice, add a regression test for that case.
We still don't do proper statistics-based cost estimation for that, so you
just get a default constant estimate. We should look into implementing that,
but this patch at least fixes the regression.
Spotted by Tom Lane, when testing query from Josh Berkus.
Introduce pg_identify_object(oid,oid,int4), which is similar in spirit
to pg_describe_object but instead produces a row of machine-readable
information to uniquely identify the given object, without resorting to
OIDs or other internal representation. This is intended to be used in
the event trigger implementation, to report objects being operated on;
but it has usefulness of its own.
Catalog version bumped because of the new function.
Rather than doing a fairly-expensive setitimer() call to prevent interrupts
from happening, let's just invent a simple boolean flag that the signal
handler is required to check. This is not only faster but considerably
more robust than before, since the previous code effectively assumed that
only ITIMER_REAL events would ever fire the SIGALRM handler, which is
obviously something that can be broken easily by third-party code.
Zoltán Böszörményi and Tom Lane
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
The estimates are based on the existing lower bound histogram, and a new
histogram of range lengths.
Bump catversion, because the range length histogram now needs to be present
in statistic slot kind 6, or you get an error on @> and <@ queries. (A
re-ANALYZE would be enough to fix that, though)
Alexander Korotkov, with some refactoring by me.
This adds the following:
json_agg(anyrecord) -> json
to_json(any) -> json
hstore_to_json(hstore) -> json (also used as a cast)
hstore_to_json_loose(hstore) -> json
The last provides heuristic treatment of numbers and booleans.
Also, in json generation, if any non-builtin type has a cast to json,
that function is used instead of the type's output function.
Andrew Dunstan, reviewed by Steve Singer.
Catalog version bumped.
This saves several catalog lookups per reference. It's not all that
exciting right now, because we'd managed to minimize the number of places
that need to fetch the data; but the upcoming writable-foreign-tables patch
needs this info in a lot more places.
formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY'). Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I". To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters. Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate. Per bug #7913 from Adnan Dursun. Back-patch to all active
branches, since it's been like this for a long time.
I fixed this code back in commit 841b4a2d5, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00. Per report from Magnus Hagander.
This was already the case for domains over arrays, but not for domains
over certain built-in types such as boolean. The special formatting
rules for those types should apply to domains over them as well.
Per discussion.
While this is a bug fix, it's also a behavioral change that seems likely
to trip up some applications. So no back-patch.
Pavel Stehule
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This enables non-backend code, such as pg_xlogdump, to use it easily.
The previous location, in src/backend/catalog/catalog.c, made that
essentially impossible because that file depends on many backend-only
facilities; so this needs to live separately.
We now write one file per database and one global file, instead of
having the whole thing in a single huge file. This reduces the I/O that
must be done when partial data is required -- which is all the time,
because each process only needs information on its own database anyway.
Also, the autovacuum launcher does not need data about tables and
functions in each database; having the global stats for all DBs is
enough.
Catalog version bumped because we have a new subdir under PGDATA.
Author: Tomas Vondra. Some rework by Álvaro
Testing by Jeff Janes
Other discussion by Heikki Linnakangas, Tom Lane.
This generalizes the existing ALTER ROLE ... SET and ALTER DATABASE
... SET functionality to allow creating settings that apply to all users
in all databases.
reviewed by Pavel Stehule
Revert commit ab0f7b6089 (in HEAD only)
in favor of the proper solution, which is to declare enum_recv() correctly
in the system catalogs. It should be declared to take type "internal"
not "cstring".
Also improve the type_sanity regression test, which should have caught
this typo, so that it actually would. Most of the relevant checks on
the signature of type I/O functions should not have been restricted to
basetypes/pseudotypes, as they should apply to any type's I/O functions.
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
Given the assumption that a box's high coordinates are not less than its
low coordinates, the tests in box_ov() are overly complicated and can be
reduced to about half as much work. Since many other functions in
geo_ops.c rely on that assumption, there doesn't seem to be a good reason
not to use it here.
Per discussion of Alexander Korotkov's GiST fix, which was already using
the simplified logic (in a non-fuzzy form, but the equivalence holds just
as well for fuzzy).
Stephen Frost
Noah Misch
Peter Eisentraut
Bruce Momjian
Tom Lane
Andrew Dunstan
Kevin Grittner
Alvaro Herrera
Simon Riggs
Heikki Linnakangas
Robert Haas