The original coding misbehaved if "char" is signed, and also made the
extremely poor decision to print control characters literally when trying
to complain about them. Report and patch by Shigeru Hanada.
In passing, also fix core dump risk in report_parse_error() should the
parse state be something other than what it expects.
It's not very sensible to set such attributes on a handler function;
but if one were to do so, fmgr.c went into infinite recursion because
it would call fmgr_security_definer instead of the handler function proper.
There is no way for fmgr_security_definer to know that it ought to call the
handler and not the original function referenced by the FmgrInfo's fn_oid,
so it tries to do the latter, causing the whole process to start over
again.
Ordinarily such misconfiguration of a procedural language's handler could
be written off as superuser error. However, because we allow non-superuser
database owners to create procedural languages and the handler for such a
language becomes owned by the database owner, it is possible for a database
owner to crash the backend, which ideally shouldn't be possible without
superuser privileges. In 9.2 and up we will adjust things so that the
handler functions are always owned by superusers, but in existing branches
this is a minor security fix.
Problem noted by Noah Misch (after several of us had failed to detect
it :-(). This is CVE-2012-2655.
We used to only allow offsets less than +/-13 hours, then it was +/14,
then it was +/-15. That's still not good enough though, as per today's bug
report from Patric Bechtel. This time I actually looked through the Olson
timezone database to find the largest offsets used anywhere. The winners
are Asia/Manila, at -15:56:00 until 1844, and America/Metlakatla, at
+15:13:42 until 1867. So we'd better allow offsets less than +/-16 hours.
Given the history, we are way overdue to have some greppable #define
symbols controlling this, so make some ... and also remove an obsolete
comment that didn't get fixed the last time.
Back-patch to all supported branches.
Previously, casts to name could generate invalidly-encoded results.
Also, make these functions match namein() more exactly, by consistently
using palloc0() instead of ad-hoc zeroing code.
Back-patch to all supported branches.
Karl Schnaitter and Tom Lane
The accurate info about what's in a lock file has been in miscadmin.h
for some time, so let's just make this comment point there instead of
maintaining a duplicative copy.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
At the time we check whether the tuple is dead to all running
transactions, we've already verified that it isn't visible to our
scan, setting hint bits if appropriate. So there's no need to
recheck CLOG for the all-dead test we do just a moment later.
So, add HeapTupleIsSurelyDead() to test the appropriate condition
under the assumption that all relevant hit bits are already set.
Review by Tom Lane.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
In ancient times, it was thought that this wouldn't work because of
TrapMacro/AssertMacro, but changing those to use a comma operator
appears to work without compiler warnings.
Normally whole-row Vars are printed as "tabname.*". However, that does not
work at top level of a targetlist, because per SQL standard the parser will
think that the "*" should result in column-by-column expansion; which is
not at all what a whole-row Var implies. We used to just print the table
name in such cases, which works most of the time; but it fails if the table
name matches a column name available anywhere in the FROM clause. This
could lead for instance to a view being interpreted differently after dump
and reload. Adding parentheses doesn't fix it, but there is a reasonably
simple kluge we can use instead: attach a no-op cast, so that the "*" isn't
syntactically at top level anymore. This makes the printing of such
whole-row Vars a lot more consistent with other Vars, and may indeed fix
more cases than just the reported one; I'm suspicious that cases involving
schema qualification probably didn't work properly before, either.
Per bug report and fix proposal from Abbas Butt, though this patch is quite
different in detail from his.
Back-patch to all supported versions.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This has been wrong for a really long time. We don't use two-phase
locking to protect against serialization anomalies.
Per discussion on pgsql-hackers about 2011-03-07; original report
by Dan Ports.
The output of the new pg_xlog_location_diff function is of type numeric,
since it could theoretically overflow an int8 due to signedness; this
provides a convenient way to format such values.
Fujii Masao, with some beautification by me.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
This definition is convenient when applying the function to the
reltablespace column of pg_class, since that's what zero means there;
and it doesn't interfere with any other plausible use of the function.
Per gripe from Bruce Momjian.
This patch reverts commit 191ef2b407
and thereby restores the pre-7.3 behavior of EXTRACT(EPOCH FROM
timestamp-without-tz). Per discussion, the more recent behavior was
misguided on a couple of grounds: it makes it hard to get a
non-timezone-aware epoch value for a timestamp, and it makes this one
case dependent on the value of the timezone GUC, which is incompatible
with having timestamp_part() labeled as immutable.
The other behavior is still available (in all releases) by explicitly
casting the timestamp to timestamp with time zone before applying EXTRACT.
This will need to be called out as an incompatible change in the 9.2
release notes. Although having mutable behavior in a function marked
immutable is clearly a bug, we're not going to back-patch such a change.
estimate_num_groups() gets unhappy with
create table empty();
select * from empty except select * from empty e2;
I can't see any actual use-case for such a query (and the table is illegal
per SQL spec), but it seems like a good idea that it not cause an assert
failure.
Commit 337b6f5ecf contained the entirely
fanciful assumption that it had made comparetup_datum unreachable.
Reported and patched by Takashi Yamamoto.
Fix up some not terribly accurate/useful comments from that commit, too.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
setlocale() accepts locale name "" as meaning "the locale specified by the
process's environment variables". Historically we've accepted that for
Postgres' locale settings, too. However, it's fairly unsafe to store an
empty string in a new database's pg_database.datcollate or datctype fields,
because then the interpretation could vary across postmaster restarts,
possibly resulting in index corruption and other unpleasantness.
Instead, we should expand "" to whatever it means at the moment of calling
CREATE DATABASE, which we can do by saving the value returned by
setlocale().
For consistency, make initdb set up the initial lc_xxx parameter values the
same way. initdb was already doing the right thing for empty locale names,
but it did not replace non-empty names with setlocale results. On a
platform where setlocale chooses to canonicalize the spellings of locale
names, this would result in annoying inconsistency. (It seems that popular
implementations of setlocale don't do such canonicalization, which is a
pity, but the POSIX spec certainly allows it to be done.) The same risk
of inconsistency leads me to not venture back-patching this, although it
could certainly be seen as a longstanding bug.
Per report from Jeff Davis, though this is not his proposed patch.
Fix loss of previous expression-simplification work when a transform
function fires: we must not simply revert to untransformed input tree.
Instead build a dummy FuncExpr node to pass to the transform function.
This has the additional advantage of providing a simpler, more uniform
API for transform functions.
Move documentation to a somewhat less buried spot, relocate some
poorly-placed code, be more wary of null constants and invalid typmod
values, add an opr_sanity check on protransform function signatures,
and some other minor cosmetic adjustments.
Note: although this patch touches pg_proc.h, no need for catversion
bump, because the changes are cosmetic and don't actually change the
intended catalog contents.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
This restores the pre-9.0 situation that it's possible to add new indexes
on pg_class and other mapped-but-not-shared catalogs, so long as you broke
the glass and flipped the big red Dont-Touch-Me switch. As before, there
are a lot of gotchas, and you'd have to be pretty desperate to try this
on a production database; but there doesn't seem to be a reason for
relmapper.c to be preventing such things all by itself. Per
experimentation with a case suggested by Cody Cutrer.
I broke this in commit 337b6f5ecf, which
among other things arranged for quicksorts to CHECK_FOR_INTERRUPTS()
slightly less frequently. Sadly, it also arranged for heapsorts to
CHECK_FOR_INTERRUPTS() much less frequently. Repair.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
In constructs such as "x IN (1,2,3,4)" and "x <> ALL(ARRAY[1,2,3,4])",
we formerly always used a general-purpose assumption that the probability
of success is independent for each comparison of "x" to an array element.
But in real-world usage of these constructs, that's a pretty poor
assumption; it's much saner to assume that the array elements are distinct
and so the match probabilities are disjoint. Apply that assumption if the
operator appears to behave as equality (for ANY) or inequality (for ALL).
But fall back to the normal independent-probabilities calculation if this
yields an impossible result, ie probability > 1 or < 0. We could protect
ourselves against bad estimates even more by explicitly checking for equal
array elements, but that is expensive and doesn't seem worthwhile: doing
it would amount to optimizing for poorly-written queries at the expense
of well-written ones.
Daniele Varrazzo and Tom Lane, after a suggestion by Ants Aasma
Now that cache invalidation callbacks get only a hash value, and not a
tuple TID (per commits 632ae6829f and
b5282aa893), the only way they can restrict
what they invalidate is to know what the hash values mean. setrefs.c was
doing this via a hard-wired assumption but that seems pretty grotty, and
it'll only get worse as more cases come up. So let's expose a calculation
function that takes the same parameters as SearchSysCache. Per complaint
from Marko Kreen.
Use-cases for this include custom log filtering rules and custom log
message transmission mechanisms (for instance, lossy log message
collection, which has been discussed several times recently).
As is our common practice for hooks, there's no regression test nor
user-facing documentation for this, though the author did exhibit a
sample module using the hook.
Martin Pihlak, reviewed by Marti Raudsepp
This patch installs significantly smarter penalty and picksplit functions
for ranges, making GiST indexes for them smaller and faster to search.
There is no on-disk format change, so no catversion bump, but you'd need
to REINDEX to get the benefits for any existing index.
Alexander Korotkov, reviewed by Jeff Davis
The code in this function that tried to cope with a missing count histogram
was quite ineffective for anything except a perfectly flat distribution.
Furthermore, since we were already punting for missing MCELEM slot, it's
rather useless to sweat over missing DECHIST: there are no cases where
ANALYZE will create the first but not the second. So just simplify the
code by punting rather than pretending we can do something useful.
Do "frac" arithmetic in int64 to prevent overflow with large statistics
targets, and improve the comments so people have some chance of
understanding how it works.
Alexander Korotkov and Tom Lane
This patch improves selectivity estimation for the array <@, &&, and @>
(containment and overlaps) operators. It enables collection of statistics
about individual array element values by ANALYZE, and introduces
operator-specific estimators that use these stats. In addition,
ScalarArrayOpExpr constructs of the forms "const = ANY/ALL (array_column)"
and "const <> ANY/ALL (array_column)" are estimated by treating them as
variants of the containment operators.
Since we still collect scalar-style stats about the array values as a
whole, the pg_stats view is expanded to show both these stats and the
array-style stats in separate columns. This creates an incompatible change
in how stats for tsvector columns are displayed in pg_stats: the stats
about lexemes are now displayed in the array-related columns instead of the
original scalar-related columns.
There are a few loose ends here, notably that it'd be nice to be able to
suppress either the scalar-style stats or the array-element stats for
columns for which they're not useful. But the patch is in good enough
shape to commit for wider testing.
Alexander Korotkov, reviewed by Noah Misch and Nathan Boley
This makes it much more convenient to build tools for Postgres that are
separately compiled and require a matching CRC implementation.
To prevent multiple copies of the CRC polynomial tables being introduced
into the postgres binaries, they are now included in the static library
libpgport that is mainly meant for replacement system functions. That
seems like a bit of a kludge, but there's no better place.
This cleans up building of the tools pg_controldata and pg_resetxlog,
which previously had to build their own copies of pg_crc.o.
In the future, external programs that need access to the CRC tables can
include the tables directly from the new header file pg_crc_tables.h.
Daniel Farina, reviewed by Abhijit Menon-Sen and Tom Lane
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
First, as noted by Itagaki Takahiro, a datum of type JSON doesn't
need to be escaped. Second, ensure that numeric output not in
the form of a legal JSON number is quoted and escaped.
Some line feeds are added to target lists and from lists to make
them more readable. By default they wrap at 80 columns if possible,
but the wrap column is also selectable - if 0 it wraps after every
item.
Andrew Dunstan, reviewed by Hitoshi Harada.
Formerly, we just punted when trying to estimate stats for variables coming
out of sub-queries using DISTINCT, on the grounds that whatever stats we
might have for underlying table columns would be inapplicable. But if the
sub-query has only one DISTINCT column, we can consider its output variable
as being unique, which is useful information all by itself. The scope of
this improvement is pretty narrow, but it costs nearly nothing, so we might
as well do it. Per discussion with Andres Freund.
This patch differs from the draft I submitted yesterday in updating various
comments about vardata.isunique (to reflect its extended meaning) and in
tweaking the interaction with security_barrier views. There does not seem
to be a reason why we can't use this sort of knowledge even when the
sub-query is such a view.
This extends the changes of commit 6252c4f9e2
so that we run the cleanup hook earlier for failure cases as well as
success cases. As before, the point is to avoid an assertion failure from
an Assert I added in commit a874fe7b4c, which
was meant to check that no user-written code can be called during portal
cleanup. This fixes a case reported by Pavan Deolasee in which the Assert
could be triggered during backend exit (see the new regression test case),
and also prevents the possibility that the cleanup hook is run after
portions of the portal's state have already been recycled. That doesn't
really matter in current usage, but it foreseeably could matter in the
future.
Back-patch to 9.1 where the Assert in question was added.
Per recent work by Peter Geoghegan, it's significantly faster to
tuplesort on a single sortkey if ApplySortComparator is inlined into
quicksort rather reached via a function pointer. It's also faster
in general to have a version of quicksort which is specialized for
sorting SortTuple objects rather than objects of arbitrary size and
type. This requires a couple of additional copies of the quicksort
logic, which in this patch are generate using a Perl script. There
might be some benefit in adding further specializations here too,
but thus far it's not clear that those gains are worth their weight
in code footprint.
We don't normally allow quals to be pushed down into a view created
with the security_barrier option, but functions without side effects
are an exception: they're OK. This allows much better performance in
common cases, such as when using an equality operator (that might
even be indexable).
There is an outstanding issue here with the CREATE FUNCTION / ALTER
FUNCTION syntax: there's no way to use ALTER FUNCTION to unset the
leakproof flag. But I'm committing this as-is so that it doesn't
have to be rebased again; we can fix up the grammar in a future
commit.
KaiGai Kohei, with some wordsmithing by me.
It's not entirely evident how the logic here relates to the
interval_transform function, so let's clue people in that they need to
check that if the rules change.
This enables ALTER TABLE to skip table and index rebuilds when the
new type is unconstraint varbit, or when the allowable number of bits
is not decreasing.
Noah Misch, with review and a fix for an OID collision by me.
This enables ALTER TABLE to skip table and index rebuilds when a column
is changed to an unconstrained numeric, or when the scale is unchanged
and the precision does not decrease.
Noah Misch, with a few stylistic changes and a fix for an OID
collision by me.
On some platforms, strtod() reports ERANGE for a denormalized value (ie,
one that can be represented as distinct from zero, but is too small to have
full precision). On others, it doesn't. It seems better to try to accept
these values consistently, so add a test to see if the result value
indicates a true out-of-range condition. This should be okay per Single
Unix Spec. On machines where the underlying math isn't IEEE standard, the
behavior for such small numbers may not be very consistent, but then it
wouldn't be anyway.
Marti Raudsepp, after a proposal by Jeroen Vermeulen
Like the XML data type, we simply store JSON data as text, after checking
that it is valid. More complex operations such as canonicalization and
comparison may come later, but this is enough for not.
There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.
When a backend needs to flush the WAL, and someone else is already flushing
the WAL, wait until it releases the WALInsertLock and check if we still need
to do the flush or if the other backend already did the work for us, before
acquiring WALInsertLock. This helps group commit, because when the WAL flush
finishes, all the backends that were waiting for it can be woken up in one
go, and the can all concurrently observe that they're done, rather than
waking them up one by one in a cascading fashion.
This is based on a new LWLock function, LWLockWaitUntilFree(), which has
peculiar semantics. If the lock is immediately free, it grabs the lock and
returns true. If it's not free, it waits until it is released, but then
returns false without grabbing the lock. This is used in XLogFlush(), so
that when the lock is acquired, the backend flushes the WAL, but if it's
not, the backend first checks the current flush location before retrying.
Original patch and benchmarking by Peter Geoghegan and Simon Riggs, although
this patch as committed ended up being very different from that.
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
btcostestimate() makes an estimate of the number of index tuples that will
be visited based on knowledge of which index clauses can actually bound the
scan within nbtree. However, it forgot to account for partial indexes in
this calculation, with the result that the cost of the index scan could be
significantly overestimated for a partial index. Fix that by merging the
predicate with the abbreviated indexclause list, in the same way as we do
with the full list to estimate how many heap tuples will be visited.
Also, slightly increase the "fudge factor" that's meant to give preference
to smaller indexes over larger ones. While this is applied to all indexes,
it's most important for partial indexes since it can be the only factor
that makes a partial index look cheaper than a similar full index.
Experimentation shows that the existing value is so small as to easily get
swamped by noise such as page-boundary-roundoff behavior. I'm tempted to
kick it up more than this, but will refrain for now.
Per report from Ruben Blanco. These are long-standing issues, but given
the lack of prior complaints I'm not going to risk changing planner
behavior in back branches by back-patching.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Hitherto, the information schema only showed explicitly granted
privileges that were visible in the *acl catalog columns. If no
privileges had been granted, the implicit privileges were not shown.
To fix that, add an SQL-accessible version of the acldefault()
function, and use that inside the aclexplode() calls to substitute the
catalog-specific default privilege set for null values.
reviewed by Abhijit Menon-Sen
Normally, accessing variable-length members of catalog structures past
the first one doesn't work at all. Here, it happened to work because
indnatts was checked to be 1, and so the defined FormData_pg_index
layout, using int2vector[1] and oidvector[1] for variable-length
arrays, happened to match the actual memory layout. But it's a very
fragile assumption, and it's not in a performance-critical path, so
code it properly using heap_getattr() instead.
bug analysis by Tom Lane
Our own qsort_arg() implementation doesn't have the defect previously
observed to affect only QNX 4, so it seems sufficiently to assert that
it isn't broken rather than retesting. Also, update a few comments to
clarify why it's valuable to retain a tie-break rule based on CTID
during index builds.
Peter Geoghegan, with slight tweaks by me.
Add counters for number and size of temporary files used
for spill-to-disk queries for each database to the
pg_stat_database view.
Tomas Vondra, review by Magnus Hagander
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
That avoids errors when the functions are used in queries like "SELECT
pg_relation_size(oid) FROM pg_class", and a table is dropped concurrently.
Phil Sorber
This prevents the postmaster from unexpectedly croaking if postgresql.conf
contains something like:
include 'invalid_directory_name'
Noah Misch. Reviewed by Tom Lane and myself.
Allows a user to use pg_cancel_queries() to cancel queries in
other backends if they are running under the same role.
pg_terminate_backend() still requires superuser permissoins.
Short patch, many authors working on the bikeshed: Magnus Hagander,
Josh Kupershmidt, Edward Muller, Greg Smith.
superuser doesn't have doesn't make much sense, as a superuser can do
whatever he wants through other means, anyway. So instead of granting
replication privilege to superusers in CREATE USER time by default, allow
replication connection from superusers whether or not they have the
replication privilege.
Patch by Noah Misch, per discussion on bug report #6264
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
The original coding of this function overlooked the possibility that
it could be passed anything except simple OpExpr indexquals. But
ScalarArrayOpExpr is possible too, and the code would probably crash
(and surely give ridiculous answers) in such a case. Add logic to try
to estimate sanely for such cases.
In passing, fix the treatment of inner-indexscan cost estimation: it was
failing to scale up properly for multiple iterations of a nestloop.
(I think somebody might've thought that index_pages_fetched() is linear,
but of course it's not.)
Report, diagnosis, and preliminary patch by Marti Raudsepp; I refactored
it a bit and fixed the cost estimation.
Back-patch into 9.1 where the bogus code was introduced.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
This makes them enforceable only on the parent table, not on children
tables. This is useful in various situations, per discussion involving
people bitten by the restrictive behavior introduced in 8.4.
Message-Id:
8762mp93iw.fsf@comcast.netCAFaPBrSMMpubkGf4zcRL_YL-AERUbYF_-ZNNYfb3CVwwEqc9TQ@mail.gmail.com
Authors: Nikhil Sontakke, Alex Hunsaker
Reviewed by Robert Haas and myself
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
This works the same as include, except that an error is not thrown
if the file is missing. Instead the fact that it's missing is
logged.
Greg Smith, reviewed by Euler Taveira de Oliveira.
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
lost. The only way we detect that at the moment is when write() fails when
we try to write to the socket.
Florian Pflug with small changes by me, reviewed by Greg Jaskiewicz.
Make sure all calls are protected by HAVE_READLINK, and get the buffer
overflow tests right. Be a bit more paranoid about string length in
_tarWriteHeader(), too.
Instead, add a function pg_tablespace_location(oid) used to return
the same information, and do this by reading the symbolic link.
Doing it this way makes it possible to relocate a tablespace when the
database is down by simply changing the symbolic link.
This patch creates an API whereby a btree index opclass can optionally
provide non-SQL-callable support functions for sorting. In the initial
patch, we only use this to provide a directly-callable comparator function,
which can be invoked with a bit less overhead than the traditional
SQL-callable comparator. While that should be of value in itself, the real
reason for doing this is to provide a datatype-extensible framework for
more aggressive optimizations, as in Peter Geoghegan's recent work.
Robert Haas and Tom Lane
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b212, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
On a platform that isn't supplying __FILE__, previous coding would either
crash or give a stale result for the filename string. Not sure how likely
that is, but the original code catered for it, so let's keep doing so.
In vpath builds, the __FILE__ macro that is used in verbose error
reports contains the full absolute file name, which makes the error
messages excessively verbose. So keep only the base name, thus
matching the behavior of non-vpath builds.
In the original implementation, a range-contained-by search had to scan
the entire index because an empty range could be lurking anywhere.
Improve that by adding a flag to upper GiST entries that says whether the
represented subtree contains any empty ranges.
Also, make a simple mod to the penalty function to discourage empty ranges
from getting pushed into subtrees without any. This needs more work, and
the picksplit function should be taught about it too, but that code can be
improved without causing an on-disk compatibility break; so we'll leave it
for another day.
Since we're breaking on-disk compatibility of range values anyway, I took
the opportunity to reorganize the range flags bits; the unused
RANGE_xB_NULL bits are now adjacent, which might open the door for using
them in some other way later.
In passing, remove the GiST range opclass entry for <>, which doesn't seem
like it can really be indexed usefully.
Alexander Korotkov, with some editorializing by Tom
In the cases where the result of the called proc is negated, we should
explicitly test both inputs for empty, to ensure we'll never return "true"
for an unsatisfiable query. In other cases we can rely on the called proc
to say the right thing.
This adds some I/O stats to the logging of autovacuum (when the
operation takes long enough that log_autovacuum_min_duration causes it
to be logged), so that it is easier to tune. Notably, it adds buffer
I/O counts (hits, misses, dirtied) and read and write rate.
Authors: Greg Smith and Noah Misch
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
The original coding would not work for discrete ranges in which the
canonicalization rule is to produce symmetric boundaries (either [] or ()
style), as noted by Jeff Davis. Florian Pflug pointed out that we could
fix that by invoking the canonicalization function to see if the range
"between" the two given ranges normalizes to empty. This implementation
of Florian's idea is a tad slower than the original code, but only in the
case where there actually is a canonicalization function --- if not, it's
essentially the same logic as before.
It's not clear that a per-datatype typanalyze function would be any more
useful than a generic typanalyze for ranges. What *is* clear is that
letting unprivileged users select typanalyze functions is a crash risk or
worse. So remove the option from CREATE TYPE AS RANGE, and instead put in
a generic typanalyze function for ranges. The generic function does
nothing as yet, but hopefully we'll improve that before 9.2 release.
Per discussion, the zero-argument forms aren't really worth the catalog
space (just write 'empty' instead). The one-argument forms have some use,
but they also have a serious problem with looking too much like functional
cast notation; to the point where in many real use-cases, the parser would
misinterpret what was wanted.
Committing this as a separate patch, with the thought that we might want
to revert part or all of it if we can think of some way around the cast
ambiguity.
Implement these tests directly instead of constructing a singleton range
and then applying range-contains. This saves a range serialize/deserialize
cycle as well as a couple of redundant bound-comparison steps, and adds
very little code on net.
Remove elem_contained_by_range from the GiST opclass: it doesn't belong
there because there is no way to use it in an index clause (where the
indexed column would have to be on the left). Its commutator is in the
opclass, and that's what counts.
Per discussion, relax the range input/construction rules so that the
only hard error is lower bound > upper bound. Cases where the lower
bound is <= upper bound, but the range nonetheless normalizes to empty,
are now permitted.
Fix core dump in range_adjacent when bounds are infinite. Marginal
cleanup of regression test cases, some more code commenting.
Fix up some infelicitous coding in DefineRange, and add some missing error
checks. Rearrange operator strategy number assignments for GiST anyrange
opclass so that they don't make such a mess of opr_sanity's table of
operator names associated with different strategy numbers. Assign
hopefully-temporary selectivity estimators to range operators that didn't
have one --- poor as the estimates are, they're still a lot better than the
default 0.5 estimate, and they'll shut up the opr_sanity test that wants to
see selectivity estimators on all built-in operators.
Move the responsibility for caching specialized information about range
types into the type cache, so that the catalog lookups only have to occur
once per session. Rearrange APIs a bit so that fn_extra caching is
actually effective in the GiST support code. (Use of OidFunctionCallN is
bad enough for performance in itself, but it also prevents the function
from exploiting fn_extra caching.)
The range I/O functions are still not very bright about caching repeated
lookups, but that seems like material for a separate patch.
Also, avoid unnecessary use of memcpy to fetch/store the range type OID and
flags, and don't use the full range_deserialize machinery when all we need
to see is the flags value.
Also fix API error in range_gist_penalty --- it was failing to set *penalty
for any case involving an empty range.
A range type whose element type has 'd' alignment must have 'd' alignment
itself, else there is no guarantee that the element value can be used
in-place. (Because range_deserialize uses att_align_pointer which forcibly
aligns the given pointer, violations of this rule did not lead to SIGBUS
but rather to garbage data being extracted, as in one of the added
regression test cases.)
Also, you can't put a toast pointer inside a range datum, since the
referenced value could disappear with the range datum still present.
For consistency with the handling of arrays and records, I also forced
decompression of in-line-compressed bound values. It would work to store
them as-is, but our policy is to avoid situations that might result in
double compression.
Add assorted regression tests for this, and bump catversion because of
fixes to built-in pg_type entries.
Also some marginal cleanup of inconsistent/unnecessary error checks.
Change range_lower and range_upper to return NULL rather than throwing an
error when the input range is empty or the relevant bound is infinite. Per
discussion, throwing an error seems likely to be unduly hard to work with.
Also, this is more consistent with the behavior of the constructors, which
treat NULL as meaning an infinite bound.
Change range_before, range_after, range_adjacent to return false rather
than throwing an error when one or both input ranges are empty.
The original definition is unnecessarily difficult to use, and also can
result in undesirable planner failures since the planner could try to
compare an empty range to something else while deriving statistical
estimates. (This was, in fact, the cause of repeatable regression test
failures on buildfarm member jaguar, as well as intermittent failures
elsewhere.)
Also tweak rangetypes regression test to not drop all the objects it
creates, so that the final state of the regression database contains
some rangetype objects for pg_dump testing.
No functional changes in this commit (except I could not resist the
temptation to re-word a couple of error messages). This is just manual
cleanup after pgindent to make the code look reasonably like other PG
code, in preparation for more detailed code review to come.
This reverts commit 0180bd6180.
contrib/userlock is gone, but user-level locking still exists,
and is exposed via the pg_advisory* family of functions.
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
The POSIX spec defines locale fields for controlling the ordering of the
value, sign, and currency symbol in monetary output, but cash_out only
supported a small subset of these options. Fully implement p/n_sign_posn,
p/n_cs_precedes, and p/n_sep_by_space per spec. Fix up cash_in so that
it will accept all these format variants.
Also, make sure that thousands_sep is only inserted to the left of the
decimal point, as required by spec.
Per bug #6144 from Eduard Kracmar and discussion of bug #6277. This patch
includes some ideas from Alexander Lakhin's proposed patch, though it is
very different in detail.
Make sure that it considers all the possibilities that the old code did,
instead of trying only one possibility per character position. To keep the
runtime in bounds, instead tweak the character incrementers to not try
every possible multibyte character code. Remove unnecessary logic to
restore the old character value on failure. Additional comment and
formatting cleanup.
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
This infrastructure doesn't in any way guarantee that the character
we produce will sort before the one we incremented; but it does at least
make it much more likely that we'll end up with something that is a valid
character, which improves our chances.
Kyotaro Horiguchi, with various adjustments by me.
We need not wait until the commit record is durably on disk, because
in the event of a crash the page we're updating with hint bits will
be gone anyway. Per off-list report from Heikki Linnakangas, this
can significantly degrade the performance of unlogged tables; I was
able to show a 2x speedup from this patch on a pgbench run with scale
factor 15. In practice, this will mostly help small, heavily updated
tables, because on larger tables you're unlikely to run into the same
row again before the commit record makes it out to disk.
This allows different instances to use the eventlog with different
identifiers, by setting the event_source GUC, similar to how
syslog_ident works.
Original patch by MauMau, heavily modified by Magnus Hagander
The uniqueness condition might fail to hold intra-transaction, and assuming
it does can give incorrect query results. Per report from Marti Raudsepp,
though this is not his proposed patch.
Back-patch to 9.0, where both these features were introduced. In the
released branches, add the new IndexOptInfo field to the end of the struct,
to try to minimize ABI breakage for third-party code that may be examining
that struct.
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
Avoid possibly dumping core when pgstat_track_activity_query_size has a
less-than-default value; avoid uselessly searching for the query string
of a successfully-exited backend; don't bother putting out an ERRDETAIL if
we don't have a query to show; some other minor stylistic improvements.
To avoid minimize risk inside the postmaster, we subject this feature
to a number of significant limitations. We very much wish to avoid
doing any complex processing inside the postmaster, due to the
posssibility that the crashed backend has completely corrupted shared
memory. To that end, no encoding conversion is done; instead, we just
replace anything that doesn't look like an ASCII character with a
question mark. We limit the amount of data copied to 1024 characters,
and carefully sanity check the source of that data. While these
restrictions would doubtless be unacceptable in a general-purpose
logging facility, even this limited facility seems like an improvement
over the status quo ante.
Marti Raudsepp, reviewed by PDXPUG and myself
This is merely an exercise in satisfying pedants, not a bug fix, because
in every case we were checking for failure later with ferror(), or else
there was nothing useful to be done about a failure anyway. Document
the latter cases.
Add a column pg_class.relallvisible to remember the number of pages that
were all-visible according to the visibility map as of the last VACUUM
(or ANALYZE, or some other operations that update pg_class.relpages).
Use relallvisible/relpages, instead of an arbitrary constant, to estimate
how many heap page fetches can be avoided during an index-only scan.
This is pretty primitive and will no doubt see refinements once we've
acquired more field experience with the index-only scan mechanism, but
it's way better than using a constant.
Note: I had to adjust an underspecified query in the window.sql regression
test, because it was changing answers when the plan changed to use an
index-only scan. Some of the adjacent tests perhaps should be adjusted
as well, but I didn't do that here.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
CREATE EXTENSION needs to transiently set search_path, as well as
client_min_messages and log_min_messages. We were doing this by the
expedient of saving the current string value of each variable, doing a
SET LOCAL, and then doing another SET LOCAL with the previous value at
the end of the command. This is a bit expensive though, and it also fails
badly if there is anything funny about the existing search_path value,
as seen in a recent report from Roger Niederland. Fortunately, there's a
much better way, which is to piggyback on the GUC infrastructure previously
developed for functions with SET options. We just open a new GUC nesting
level, do our assignments with GUC_ACTION_SAVE, and then close the nesting
level when done. This automatically restores the prior settings without a
re-parsing pass, so (in principle anyway) there can't be an error. And
guc.c still takes care of cleanup in event of an error abort.
The CREATE EXTENSION code for this was modeled on some much older code in
ri_triggers.c, which I also changed to use the better method, even though
there wasn't really much risk of failure there. Also improve the comments
in guc.c to reflect this additional usage.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
This code was looking at the sub-Query tree as seen in the parent query's
RangeTblEntry; but that's the pristine parser output, and what we need to
look at is the tree as it stands at the completion of planning. Otherwise
we might pick up a Var that references a subquery that got flattened and
hence has no RelOptInfo in the subroot. Per report from Peter Geoghegan.
In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction. This is the root cause of bug #6218 from Yamamoto
Takashi. While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources. However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner. Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward. predicate.c's dependencies on TopTransactionResourceOwner
go away too.
I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.
The code path that tried a generic plan, didn't like it, and then made a
custom plan was mistakenly passing the same copy of the query_list to the
planner both times. This doesn't work too well for nontrivial queries,
since the planner tends to scribble on its input. Diagnosis and fix by
Yamamoto Takashi.
I had copied-and-pasted a claim that we couldn't reach this point when
dealing with utility statements, but that was a leftover from when the
caller was required to supply a plan to start with. We now will go
through here at least once when handling a utility statement, so it
seems worth a check to see whether a snapshot is actually needed.
(Note that analyze_requires_snapshot is quite a cheap test.)
Per suggestion from Yamamoto Takashi. I don't think I believe that this
resolves his reported assertion failure; but it's worth changing anyway,
just to save a cycle or two.
The standardized errno code for "no such locale" failures is ENOENT, which
we were just reporting at face value, viz "No such file or directory".
Per gripe from Thom Brown, this might confuse users, so add an errdetail
message to clarify what it means. Also, report newlocale() failures as
ERRCODE_INVALID_PARAMETER_VALUE rather than using
errcode_for_file_access(), since newlocale()'s errno values aren't
necessarily tied directly to file access failures.
The regression tests were failing with CLOBBER_CACHE_ALWAYS enabled,
as reported by buildfarm member jaguar. There was an Assert in
BuildCachedPlan that asserted that the CachedPlanSource hadn't been
invalidated since we called RevalidateCachedQuery, which in theory can't
happen because we are holding locks on all the relevant database objects.
However, CLOBBER_CACHE_ALWAYS generates a false positive by making an
invalidation happen anyway; and on reflection, that could also occur as a
result of a badly-timed sinval reset due to queue overflow. We could just
remove the Assert and forge ahead with the not-really-stale querytree, but
it seems safer to do another RevalidateCachedQuery call just to make real
sure everything's OK.
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This function will be useful for altering the lifespan of a context after
creation (for example, by creating it under a transient context and later
reparenting it to belong to a long-lived context). It costs almost no new
code, since we can refactor what was there. Per my proposal of yesterday.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
With 9.1's use of Params to pass down values from NestLoop join nodes
to their inner plans, it is possible for a Param to have type RECORD, in
which case the set of fields comprising the value isn't determinable by
inspection of the Param alone. However, just as with a Var of type RECORD,
we can find out what we need to know if we can locate the expression that
the Param represents. We already knew how to do this in get_parameter(),
but I'd overlooked the need to be able to cope in get_name_for_var_field(),
which led to EXPLAIN failing with "record type has not been registered".
To fix, refactor the search code in get_parameter() so it can be used by
both functions.
Per report from Marti Raudsepp.
The code in shift_jis_20042euc_jis_2004() would fetch two bytes even when
only one remained in the string. Since conversion functions aren't
supposed to assume null-terminated input, this poses a small risk of
fetching past the end of memory and incurring SIGSEGV. No such crash has
been identified in the field, but we've certainly seen the equivalent
happen in other code paths, so patch this one all the way back.
Report and patch by Noah Misch.
It used to say
ERROR: invalid byte sequence for encoding "UTF8": 0xdb24
Change this to
ERROR: invalid byte sequence for encoding "UTF8": 0xdb 0x24
to make it clear that this is a byte sequence and not a code point.
Also fix the adjacent "character has no equivalent" message that has
the same issue.
If a sub-select's output column is a simple Var, recursively look for
statistics applying to that Var, and use them if available. The need for
this was foreseen ages ago, but we didn't have enough infrastructure to do
it with reasonable speed until just now.
We punt and stick with default estimates if the subquery uses set
operations, GROUP BY, or DISTINCT, since those operations would change the
underlying column statistics (particularly, the relative frequencies of
different values) beyond recognition. This means that the types of
sub-selects for which this improvement applies are fairly limited, since
most subqueries satisfying those restrictions would have gotten flattened
into the parent query anyway. But it does help for some cases, such as
subqueries with ORDER BY or LIMIT.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
dots. I previously worked around this in initdb, mapping the known
problematic locale names to aliases that work, but Hiroshi Inoue pointed
out that that's not enough because even if you use one of the aliases, like
"Chinese_HKG", setlocale(LC_CTYPE, NULL) returns back the long form, ie.
"Chinese_Hong Kong S.A.R.". When we try to restore an old locale value by
passing that value back to setlocale(), it fails. Note that you are affected
by this bug also if you use one of those short-form names manually, so just
reverting the hack in initdb won't fix it.
To work around that, move the locale name mapping from initdb to a wrapper
around setlocale(), so that the mapping is invoked on every setlocale() call.
Also, add a few checks for failed setlocale() calls in the backend. These
calls shouldn't fail, and if they do there isn't much we can do about it,
but at least you'll get a warning.
Backpatch to 9.1, where the initdb hack was introduced. The Windows bug
affects older versions too if you set locale manually to one of the aliases,
but given the lack of complaints from the field, I'm hesitent to backpatch.
Examination of examples provided by Mark Kirkwood and others has convinced
me that actually commit 7f3eba30c9 was quite
a few bricks shy of a load. The useful part of that patch was clamping
ndistinct for the inner side of a semi or anti join, and the reason why
that's needed is that it's the only way that restriction clauses
eliminating rows from the inner relation can affect the estimated size of
the join result. I had not clearly understood why the clamping was
appropriate, and so mis-extrapolated to conclude that we should clamp
ndistinct for the outer side too, as well as for both sides of regular
joins. These latter actions were all wrong, and are reverted with this
patch. In addition, the clamping logic is now made to affect the behavior
of both paths in eqjoinsel_semi, with or without MCV lists to compare.
When we have MCVs, we suppose that the most common values are the ones
that are most likely to survive the decimation resulting from a lower
restriction clause, so we think of the clamping as eliminating non-MCV
values, or potentially even the least-common MCVs for the inner relation.
Back-patch to 8.4, same as previous fixes in this area.
This patch fixes an oversight in my commit
7f3eba30c9 of 2008-10-23. That patch
accounted for baserel restriction clauses that reduced the number of rows
coming out of a table (and hence the number of possibly-distinct values of
a join variable), but not for join restriction clauses that might have been
applied at a lower level of join. To account for the latter, look up the
sizes of the min_lefthand and min_righthand inputs of the current join,
and clamp with those in the same way as for the base relations.
Noted while investigating a complaint from Ben Chobot, although this in
itself doesn't seem to explain his report.
Back-patch to 8.4; previous versions used different estimation methods
for which this heuristic isn't relevant.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
Previously, 'yesterday 04:00:00'::timestamp didn't do the same thing as
'04:00:00 yesterday'::timestamp, and the return value from the latter
was midnight rather than the specified time.
Dean Rasheed, with some stylistic changes
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
The TID isn't stable enough: we might queue an sinval event before a VACUUM
FULL, and then process it afterwards, when the target tuple no longer has
the same TID. So we must invalidate entries on the basis of hash value
only. The old coding can be shown to result in various bizarre,
hard-to-reproduce errors in the presence of concurrent VACUUM FULLs on
system catalogs, and could easily result in permanent catalog corruption,
up to and including complete loss of tables.
This commit is just a minimal fix that removes the unsafe comparison.
We should remove transmission of the tuple TID from sinval messages
altogether, and then arrange to suppress the extra message in the common
case of a heap_update that doesn't change the key hashvalue. But that's
going to be much more invasive, and will only produce a probably-marginal
performance gain, so it doesn't seem like material for a back-patch.
Back-patch to 9.0. Before that, VACUUM FULL refused to do any tuple moving
if it found any INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples (and
CLUSTER would give up altogether), so there was no risk of moving a tuple
that might be the subject of an unsent sinval message.
We have to be sure that we have revalidated each nailed-in-cache relcache
entry before we try to use it to load data for some other relcache entry.
The introduction of "mapped relations" in 9.0 broke this, because although
we updated the state kept in relmapper.c early enough, we failed to
propagate that information into relcache entries soon enough; in
particular, we could try to fetch pg_class rows out of pg_class before
we'd updated its relcache entry's rd_node.relNode value from the map.
This bug accounts for Dave Gould's report of failures after "vacuum full
pg_class", and I believe that there is risk for other system catalogs
as well.
The core part of the fix is to copy relmapper data into the relcache
entries during "phase 1" in RelationCacheInvalidate(), before they'll be
used in "phase 2". To try to future-proof the code against other similar
bugs, I also rearranged the order in which nailed relations are visited
during phase 2: now it's pg_class first, then pg_class_oid_index, then
other nailed relations. This should ensure that RelationClearRelation can
apply RelationReloadIndexInfo to all nailed indexes without risking use
of not-yet-revalidated relcache entries.
Back-patch to 9.0 where the relation mapper was introduced.
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
The statement start timestamp was not set before initiating the transaction
that is used to look up client authentication information in pg_authid.
In consequence, enable_sig_alarm computed a wrong value (far in the past)
for statement_fin_time. That didn't have any immediate effect, because the
timeout alarm was set without reference to statement_fin_time; but if we
subsequently blocked on a lock for a short time, CheckStatementTimeout
would consult the bogus value when we cancelled the lock timeout wait,
and then conclude we'd timed out, leading to immediate failure of the
connection attempt. Thus an innocent "vacuum full pg_authid" would cause
failures of concurrent connection attempts. Noted while testing other,
more serious consequences of vacuum full on system catalogs.
We should set the statement timestamp before StartTransactionCommand(),
so that the transaction start timestamp is also valid. I'm not sure if
there are any non-cosmetic effects of it not being valid, but the xact
timestamp is at least sent to the statistics machinery.
Back-patch to 9.0. Before that, the client authentication timeout was done
outside any transaction and did not depend on this state to be valid.
The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
The previous limit of 1024 was set on the assumption that all modern syslog
implementations have line length limits of 2KB or so. However, this is
false, as at least Solaris and sysklogd truncate at only 1KB. 900 seems
to leave enough room for the max likely length of the tacked-on prefixes,
so let's go with that.
As with the previous change, it doesn't seem wise to back-patch this into
already-released branches; but it should be OK to sneak it into 9.1.
Noah Misch
It turns out to be possible to link against a libxml2.so that does this
differently than the version we configured and built against, so we need
a runtime check to avoid bizarre behavior. Per report from Bernd Helmle.
Patch by Florian Pflug.
Previously, xpath() simply returned an empty array if the expression did
not yield a node set. This is useless for expressions that return scalars,
such as one with name() at the top level. Arrange to return the scalar
value as a single-element xml array, instead. (String values will be
suitably escaped.)
This change will also cause xpath_exists() to return true, not false,
for such expressions.
Florian Pflug, reviewed by Radoslaw Smogura
Without this it's possible for the output to not be legal XML, as
illustrated by the added regression test cases.
NB: this change will need to be called out as an incompatibility in the
9.2 release notes, since it's possible somebody was relying on the old
behavior, even though it's clearly wrong.
Florian Pflug, reviewed by Radoslaw Smogura
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
This is more SQL-spec-compliant, more easily extensible, and better
performing than the old method of inventing special variables.
Pavel Stehule, reviewed by Shigeru Hanada and David Wheeler
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
This function supports untranslated detail messages, in the same way that
errmsg_internal supports untranslated primary messages. We've needed this
for some time IMO, but discussion of some cases in the SSI code provided
the impetus to actually add it.
Kevin Grittner, with minor adjustments by me
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
get_op_btree_interpretation assumed this in order to save some duplication
of code, but it's not true in general anymore because we added <> support
to btree_gist. (We still assume it for btree opclasses, though.)
Also, essentially the same logic was baked into predtest.c. Get rid of
that duplication by generalizing get_op_btree_interpretation so that it
can be used by predtest.c.
Per bug report from Denis de Bernardy and investigation by Jeff Davis,
though I didn't use Jeff's patch exactly as-is.
Back-patch to 9.1; we do not support this usage before that.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
This is the proper fix for bug #6082 about
pg_stat_reset_shared(NULL) causing a crash, and it reverts
commit 79aa44536f on head.
The workaround of throwing an error from inside the function is
left on backbranches (including 9.1) since this change requires
a new initdb.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This allows deadlock_timeout to be reduced for transactions that are
particularly likely to be involved in a deadlock, thus detecting it
more quickly. It is also potentially useful as a poor-man's deadlock
priority mechanism: a transaction with a high deadlock_timeout is less
likely to be chosen as the victim than one with a low
deadlock_timeout. Since that could be used to game the system, we
make this PGC_SUSET rather than PGC_USERSET.
At some point, it might be worth thinking about a more explicit
priority mechanism, since using this is far from fool-proof. But
let's see whether there's enough use case to justify the additional
work before we go down that route.
Noah Misch, reviewed by Shigeru Hanada
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
