We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
Since gtrgm_penalty() is usually called many times in a row with the same
"newval" (to determine which item on an index page newval fits into best),
the makesign() calculation is repetitious. It's expensive enough to make
it worth caching the result, so do so. On my machine this is good for
more than a 40% savings in the time needed to build a trigram index on
/usr/share/dict/words. This is all per a suggestion of Heikki's.
In passing, make some mostly-cosmetic improvements in the caching logic in
the other functions in this file that rely on caching info in fn_extra.
Because these tests require root privileges, not to mention invasive
changes to the security configuration of the host system, it's not
reasonable for them to be invoked by a regular "make check" or "make
installcheck". Instead, dike out the Makefile's knowledge of the tests,
and change chkselinuxenv (now renamed "test_sepgsql") into a script that
verifies the environment is workable and then runs the tests. It's
expected that test_sepgsql will only be run manually.
While at it, do some cleanup in the error checking in the script, and
do some wordsmithing in the documentation.
This is implemented as a per-column boolean option, rather than trying
to match COPY's convention of a single option listing the column names.
Shigeru Hanada, reviewed by KaiGai Kohei
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cab.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Don't test whether the number of labels is numerically equal to zero;
count(*) isn't going return zero anyway, and the current coding blows
up if it returns an empty string or an error.
There's no reason for this test to use the undocumented pg_prepared_xact()
function, when it can use the stable API pg_prepared_xacts instead.
Fixes breakage against 8.3, as reported by Justin Arnold.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
The previous coding resulted in contrib modules unintentionally overriding
the use of CONTRIB_TESTDB. There seems no particularly good reason to
allow that (after all, the makefile can set CONTRIB_TESTDB if that's really
what it intends).
In passing, document REGRESS_OPTS where the other pgxs.mk options are
documented.
Back-patch to 9.1 --- in prior versions, there were no cases of contrib
modules setting REGRESS_OPTS without including the --dbname switch, so
while the coding was fragile there was no actual bug.
We'll have to settle for just listing the extensions' data types,
since function arguments seem to sort differently in different locales.
Per buildfarm results.
When we implemented extensions, we made findDependentObjects() treat
EXTENSION dependency links similarly to INTERNAL links. However, that
logic contained an implicit assumption that an object could have at most
one INTERNAL dependency, so it did not work correctly for objects having
both INTERNAL and DEPENDENCY links. This led to failure to drop some
extension member objects when dropping the extension. Furthermore, we'd
never actually exercised the case of recursing to an internally-referenced
(owning) object from anything other than a NORMAL dependency, and it turns
out that passing the incoming dependency's flags to the owning object is
the Wrong Thing. This led to sometimes dropping a whole extension silently
when we should have rejected the drop command for lack of CASCADE.
Since we obviously were under-testing extension drop scenarios, add some
regression test cases. Unfortunately, such test cases require some
extensions (duh), so we can't test for problems in the core regression
tests. I chose to add them to the earthdistance contrib module, which is
a good test case because it has a dependency on the cube contrib module.
Back-patch to 9.1. Arguably these are pre-existing bugs in INTERNAL
dependency handling, but since it appears that the cases can never arise
pre-9.1, I'll refrain from back-patching the logic changes further than
that.
Eliminate dependencies on "which", as we don't really need that to be
installed for proper testing. Don't number the tests, as that increases
the footprint of every patch that wants to add or remove tests. Make
the test output more informative, so that it's a bit easier to see what
went right (or wrong). Spelling and grammar improvements.
contrib/xml2 can get by without libxslt; the relevant features just
won't work. But if doesn't have libxml2, or if sepgsql doesn't have
libselinux, the link succeeds but the module then fails to work at load
time. To avoid that, link the require libraries unconditionally, so
that it will be clear at link-time that there is a problem.
Per discussion with Tom Lane and KaiGai Kohei.
Also, handle failure better: don't just blindly keep trying to delete
stuff after the transaction has already failed.
Tim Lewis, reviewed by Josh Kupershmidt, with further hacking by me.
The old check against MAX_RANDOM_VALUE is clearly irrelevant since
getrand() no longer calls random(). Instead, check whether min and max
are close enough together to avoid an overflow inside getrand(), as
suggested by Tom Lane. This is still somewhat silly, because we're
using atoi(), which doesn't check for overflow anyway and (at least on
my system) will cheerfully return 0 when given "4294967296". But that's
a problem for another commit.
glibc renders random() thread-safe by wrapping a futex lock around it;
testing reveals that this limits the performance of pgbench on machines
with many CPU cores. Rather than switching to random_r(), which is
only available on GNU systems and crashes unless you use undocumented
alchemy to initialize the random state properly, switch to our built-in
implementation of erand48(), which is both thread-safe and concurrent.
Since the list of reasons not to use the operating system's erand48()
is getting rather long, rename ours to pg_erand48() (and similarly
for our implementations of lrand48() and srand48()) and just always
use those. We were already doing this on Cygwin anyway, and the
glibc implementation is not quite thread-safe, so pgbench wouldn't
be able to use that either.
Per discussion with Tom Lane.
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Add errno-based output to error messages where appropriate, reformat
blocks to about 72 characters per line, use spaces instead of tabs for
indentation, and other style adjustments.
This was already a runtime failure condition, but it's better to check
at validation time if possible. Lightly modified version of a patch
by Shigeru Hanada.
Certain subdirectories do not get built if corresponding options are not
selected at configure time. However, "make distprep" should visit such
directories anyway, so that constructing derived files to be included in
the tarball happens without requiring all configure options to be given
in the tarball build script. Likewise, it's better if cleanup actions
unconditionally visit all directories (for example, this ensures proper
cleanup if someone has done a manual make in such a subdirectory).
To handle this, set up a convention that subdirectories that are
conditionally included in SUBDIRS should be added to ALWAYS_SUBDIRS
instead when they are excluded.
Back-patch to 9.1, so that plpython's spiexceptions.h will get provided
in 9.1 tarballs. There don't appear to be any instances where distprep
actions got missed in previous releases, and anyway this fix requires
gmake 3.80 so we don't want to apply it before 9.1.
A password containing a character with the high bit set was misprocessed
on machines where char is signed (which is most). This could cause the
preceding one to three characters to fail to affect the hashed result,
thus weakening the password. The result was also unportable, and failed
to match some other blowfish implementations such as OpenBSD's.
Since the fix changes the output for such passwords, upstream chose
to provide a compatibility hack: password salts beginning with $2x$
(instead of the usual $2a$ for blowfish) are intentionally processed
"wrong" to give the same hash as before. Stored password hashes can
thus be modified if necessary to still match, though it'd be better
to change any affected passwords.
In passing, sync a couple other upstream changes that marginally improve
performance and/or tighten error checking.
Back-patch to all supported branches. Since this issue is already
public, no reason not to commit the fix ASAP.
This is an ugly hack to get around the fact that significant parts of the
core backend assume they don't need to worry about passing collation to
equality and hashing functions. That's true for the core string datatypes,
but citext should ideally have equality behavior that depends on the
specified collation's LC_CTYPE. However, there's no chance of fixing the
core before 9.2, so we'll have to live with this compromise arrangement for
now. Per bug #6053 from Regina Obe.
The code changes in this commit should be reverted in full once the core
code is up to speed, but be careful about reverting the docs changes:
I fixed a number of obsolete statements while at it.
For consistency, have all non-ASCII characters from contributors'
names in the source be in UTF-8. But remove some other more
gratuitous uses of non-ASCII characters.
For consistency with other tools, put the options before further usage
information.
In pg_standby, remove the supposedly deprecated -l option from the
given example invocation.
the connection; also restructure the libpq connection code.
This patch also removes the unused variable postmasterPID and fixes a
libpq structure leak that was in the testing loop.
Added a new option --extra-install to pg_regress to arrange installing
the respective contrib directory into the temporary installation.
This is currently not yet supported for Windows MSVC builds.
Updated the .gitignore files for contrib modules to ignore the
leftovers of a temp-install check run.
Changed the exit status of "make check" in a pgxs build (which still
does nothing) to 0 from 1.
Added "make check" in contrib to top-level "make check-world".
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
Make use of the collation attached to the index column, instead of
hard-wiring DEFAULT_COLLATION_OID. (Note: in theory this could require
reindexing btree_gist indexes on textual columns, but I rather doubt anyone
has one with a non-default declared collation as yet.)
Using DEFAULT_COLLATION_OID in the comparePartial functions was not only
a lame hack, but outright wrong, because the compare functions for
collation-aware types were already responding to the declared index
collation. So comparePartial would have the wrong expectation about
the index's sort order, possibly leading to missing matches for prefix
searches.
If someone removes the 'postgres' database from the old cluster and the
new cluster has a 'postgres' database, the number of databases will not
match. We actually could upgrade such a setup, but it would violate the
1-to-1 mapping of database counts, so we throw an error instead.
Previously they got an error during the upgrade, and not at the check
stage; PG 9.0.4 does the same.
... for some value of "properly". Instead of overriding REGRESS_OPTS,
set the variables ENCODING and NO_LOCALE, which is more expressive and
allows overriding by the user. Fix vcregress.pl to handle that.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
Although there remains some debate about how CREATE TYPE should represent
the collation property, this doesn't really affect what we need to do in
citext's script, so go ahead and fix that.
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
HeapTupleHeader's t_infomask and t_infomask2 are defined as 16-bit
unsigned integers, so when the 16th bit was set, heap_page_item was
returning them as negative values, which was ugly.
The change to pageinspect--unpackaged--1.0.sql allows a module upgraded
from 9.0 to be cleanly updated from the previous definition.
File encodings can be specified separately from client encoding.
If not specified, client encoding is used for backward compatibility.
Cases when the encoding doesn't match client encoding are slower
than matched cases because we don't have conversion procs for other
encodings. Performance improvement would be be a future work.
Original patch by Hitoshi Harada, and modified by me.
This is both very useful in its own right, and an important test case
for the core FDW support.
This commit includes a small refactoring of copy.c to expose its option
checking code as a separately callable function. The original patch
submission duplicated hundreds of lines of that code, which seemed pretty
unmaintainable.
Shigeru Hanada, reviewed by Itagaki Takahiro and Tom Lane
intarray and tsearch2 both reference core support functions in their GIN
opclasses, and the signatures of those functions changed for 9.1. We added
backwards-compatible pg_proc entries for the functions in order to allow
9.0 dump files to be restored at all, but that hack leaves the opclasses
pointing at pg_proc entries different from what they'd point to if the
contrib modules were installed fresh in 9.1. To forestall any possibility
of future problems, fix the opclasses to match fresh installs via the
expedient of direct UPDATEs on pg_amproc in the update-from-unpackaged
scripts. (Yech ... but the alternatives are worse, or require far more
effort than seems justified right now.)
Note: updating pg_amproc is sufficient because there will be no pg_depend
entries corresponding to these dependencies, since the referenced functions
are all pinned.
The initial version of the update-from-unpackaged script neglected to
include the <> operators that were added to the opclasses during 9.1.
To make this script produce the same final state as the regular install
script, use the same ALTER OPERATOR FAMILY trick as in pg_trgm.
Take care of some loose ends in the update-from-unpackaged script, and
apply some ugly hacks to ensure that it produces the same catalog state
as the fresh-install script. Per discussion, this seems like a safer
plan than having two different catalog states that both call themselves
"pg_trgm 1.0", even if it's not immediately clear that the subtle
differences would ever matter.
Also, fix the stub function gin_extract_trgm() so that it works instead
of just bleating. Needed because this function will get called during a
regular dump and reload, if there are any indexes using its opclass.
The user won't have an opportunity to update the extension till later,
so telling him to do so is unhelpful.
These are needed to support reloading dumps of 9.0 installations containing
contrib/intarray or contrib/tsearch2. Since not only regular dump/reload
but binary upgrade would fail, it seems worth the trouble to carry these
stubs for awhile. Note that the contrib opclasses referencing these
functions will still work fine, since GIN doesn't actually pay any
attention to the declared signature of a support function.
Initially it was called int_aggregate after the old SQL file, but since
the documentation just says "intagg" and that's also the directory name,
let's conform to that instead.
From first pass of testing. Notably, there seems to be no need for
adminpack--unpackaged--1.0.sql because none of the objects that the
old module creates would ever be dumped by pg_dump anyway (they are
all in pg_catalog).
It was never terribly consistent to use OR REPLACE (because of the lack of
comparable functionality for data types, operators, etc), and
experimentation shows that it's now positively pernicious in the extension
world. We really want a failure to occur if there are any conflicts, else
it's unclear what the extension-ownership state of the conflicted object
ought to be. Most of the time, CREATE EXTENSION will fail anyway because
of conflicts on other object types, but an extension defining only
functions can succeed, with bad results.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
relative, by creating a function path_is_relative_and_below_cwd() to
check for specific requirements. It is unclear if this fixes a security
problem or not but the new code is more robust.
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
This follows my proposal of yesterday, namely that we try to recreate the
previous state of the extension exactly, instead of allowing CREATE
EXTENSION to run a SQL script that might create some entirely-incompatible
on-disk state. In --binary-upgrade mode, pg_dump won't issue CREATE
EXTENSION at all, but instead uses a kluge function provided by
pg_upgrade_support to recreate the pg_extension row (and extension-level
pg_depend entries) without creating any member objects. The member objects
are then restored in the same way as if they weren't members, in particular
using pg_upgrade's normal hacks to preserve OIDs that need to be preserved.
Then, for each member object, ALTER EXTENSION ADD is issued to recreate the
pg_depend entry that marks it as an extension member.
In passing, fix breakage in pg_upgrade's enum-type support: somebody didn't
fix it when the noise word VALUE got added to ALTER TYPE ADD. Also,
rationalize parsetree representation of COMMENT ON DOMAIN and fix
get_object_address() to allow OBJECT_DOMAIN.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
Unlike Btree-based LIKE optimization, this works for non-left-anchored
search patterns. The effectiveness of the search depends on how many
trigrams can be extracted from the pattern. (The worst case, with no
trigrams, degrades to a full-table scan, so this isn't a panacea. But
it can be very useful.)
Alexander Korotkov, reviewed by Jan Urbanski
contrib/intarray's gettoken() uses a fixed-size buffer to collect an
integer's digits, and did not guard against overrunning the buffer.
This is at least a backend crash risk, and in principle might allow
arbitrary code execution. The code didn't check for overflow of the
integer value either, which while not presenting a crash risk was still
bad.
Thanks to Apple Inc's security team for reporting this issue and supplying
the fix.
Security: CVE-2010-4015
This is still pretty rough - among other things, the documentation
needs work, and the messages need a visit from the style police -
but this gets the basic framework in place.
KaiGai Kohei
Reduce #includes to minimum actually needed; in particular include
postgres_fe.h not postgres.h, so as to stop build failures on some
platforms.
Use get_progname() instead of hardwired program name; improve error
checking for command line syntax; bring error messages into line with
style guidelines; include strerror result in die() cases.
Un-break Windows build (I hope) by making the HAVE_FSYNC_WRITETHROUGH
code match the backend. Fix incorrect program help message. static-ize
all functions.
Actually rename the program, rather than just claiming we did. Hook it
into the build system. Get rid of useless dependency on libpq. Clean up
#include list and messy whitespace.
In particular, make hstore @> '' succeed for all hstores, likewise
hstore ?& '{}'. Previously the results were inconsistent and could
depend on whether you were using a GiST index, GIN index, or seqscan.
This applies the fix for bug #5784 to remaining places where we wish
to reject nulls in user-supplied arrays. In all these places, there's
no reason not to allow a null bitmap to be present, so long as none of
the current elements are actually null.
I did not change some other places where we are looking at system catalog
entries or aggregate transition values, as the presence of a null bitmap
in such an array would be suspicious.
The array containment operators now behave per mathematical expectation
for empty arrays (ie, an empty array is contained in anything).
Both these operators and the query_int operators now work as expected in
GiST and GIN index searches, rather than having corner cases where the
index searches gave different answers.
Also, fix unexpected failures where the operators would claim that an array
contained nulls, when in fact there was no longer any null present (similar
to bug #5784). The restriction to not have nulls is still there, as
removing it would take a lot of added code complexity and probably slow
things down significantly.
Also, remove the arbitrary restriction to 1-D arrays; unlike the other
restriction, this was buying us nothing performance-wise.
Assorted cosmetic improvements and marginal performance improvements, too.
up relations, but rather order old/new relations and use the same array
index value for both. This should speed up pg_upgrade for databases
with many relations.
which is stored in pg_largeobject_metadata.
No backpatch to 9.0 because you can't migrate from 9.0 to 9.0 with the
same catversion (because of tablespace conflict), and a pre-9.0
migration to 9.0 has not large object permissions to migrate.
Toast tables have identical pg_class.oid and pg_class.relfilenode, but
for clarity it is good to preserve the pg_class.oid.
Update comments regarding what is preserved, and do some
variable/function renaming for clarity.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
pointers, which simplifies the code. This was not possible in 9.0 because
everything was in a single nested struct, but is possible now.
Per suggestion from Tom.
Don't insist on pg_dumpall and psql being present in the old cluster,
since they are not needed. Do insist on pg_resetxlog being present
(in both old and new), since we need it. Also check for pg_config,
but only in the new cluster. Remove the useless attempt to call
pg_config in the old cluster; we don't need to know the old value of
--pkglibdir. (In the case of a stripped-down migration installation
there might be nothing there to look at anyway, so any future change
that might reintroduce that need would have to be considered carefully.)
Per my attempts to build a minimal previous-version installation to support
pg_upgrade.
It appears that this will be faster for all but the shortest strings;
at least one some platforms, memcmp() can use word-at-a-time comparisons.
Noah Misch, somewhat pared down.
After parsing a parenthesized subexpression, we must pop all pending
ANDs and NOTs off the stack, just like the case for a simple operand.
Per bug #5793.
Also fix clones of this routine in contrib/intarray and contrib/ltree,
where input of types query_int and ltxtquery had the same problem.
Back-patch to all supported versions.
This patch replaces Guttman's generalized split method with a simple
sort-by-center-points algorithm. Since the data is only one-dimensional
we don't really need the slow and none-too-stable Guttman method.
This is in part a bug fix, since seg has the same size_alpha versus
size_beta typo that was recently fixed in contrib/cube. It seems
prudent to apply this rather aggressive fix only in HEAD, though.
Back branches will just get the typo fix.
Alexander Korotkov, reviewed by Yeb Havinga
1. Don't reimplement S_ISDIR() and S_ISREG() badly.
2. Don't reimplement access() badly.
This code appears to have been copied from ancient versions of the
corresponding backend routines, and not patched to incorporate subsequent
fixes (see my commits of 2008-03-31 and 2010-01-14 respectively).
It might be a good idea to change it to just *call* those routines,
but for now I'll just transpose these fixes over.
Most of the functions that execute XPath queries leaked the data structures
created by libxml2. This memory would not be recovered until end of
session, so it mounts up pretty quickly in any serious use of the feature.
Per report from Pavel Stehule, though this isn't his patch.
Back-patch to all supported branches.
This eliminates the need for inefficient implementions of this
functionality in both contrib/dblink and contrib/tablefunc, so remove
them. The upcoming patch implementing an in-core format() function
will also require this functionality.
In passing, add some regression tests.
Having this in src/include/port.h makes no sense, now that copydir.c lives
in src/backend/strorage rather than src/port. Along the way, remove an
obsolete comment from contrib/pg_upgrade that makes reference to the old
location.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
There was an incorrect Assert in hstoreValidOldFormat(), which would cause
immediate core dumps when attempting to work with pre-9.0 hstore data,
but of course only in an assert-enabled build.
Also, ghstore_decompress() incorrectly applied DatumGetHStoreP() to a datum
that wasn't actually an hstore, but rather a ghstore (ie, a gist signature
bitstring). That used to be harmless, but could now result in misbehavior
if the hstore format conversion code happened to trigger. In reality,
since ghstore is not marked toastable (and doesn't need to be), this
function is useless anyway; we can lobotomize it down to returning the
passed-in pointer.
Both bugs found by Andrew Gierth, though this isn't exactly his proposed
patch.
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
out immediately on any out-of-memory condition. It's rather pointless to
imagine that pgbench will be able to continue usefully after a malloc
failure, and in any case there were a number of unchecked mallocs.
pairs that can be handled by xslt_process().
There is much else to do here, but this patch seems useful in its own right
for as long as this code survives.
Pavel Stehule, reviewed by Mike Fowler
- Rename TSParserGetPrsid to get_ts_parser_oid.
- Rename TSDictionaryGetDictid to get_ts_dict_oid.
- Rename TSTemplateGetTmplid to get_ts_template_oid.
- Rename TSConfigGetCfgid to get_ts_config_oid.
- Rename FindConversionByName to get_conversion_oid.
- Rename GetConstraintName to get_constraint_oid.
- Add new functions get_opclass_oid, get_opfamily_oid, get_rewrite_oid,
get_rewrite_oid_without_relid, get_trigger_oid, and get_cast_oid.
The name of each function matches the corresponding catalog.
Thanks to KaiGai Kohei for the review.
Operating directly on the underlying varlena saves palloc and memcpy
overhead, which testing shows to be significant.
Extracted from a larger patch by Alexander Korotkov.
supposing that they should set SHLIB_LINK rather than LDFLAGS_SL. Since these
don't go through Makefile.shlib that was a no-op on most platforms. Also
regularize the few platform-specific Makefiles that did pay attention to
SHLIB_LINK: it seems that the real value of that is to pull in BE_DLLLIBS,
so do that instead. Per buildfarm failures on cygwin.
dblink_build_sql_insert() and related functions. Now the column numbers
are treated as logical not physical column numbers. This will provide saner
behavior in the presence of dropped columns; furthermore, if we ever get
around to allowing rearrangement of logical column ordering, the original
definition would become nearly untenable from a usability standpoint.
Per recent discussion of dblink's handling of dropped columns.
Not back-patched for fear of breaking existing applications.
columns correctly. In passing, get rid of some dead logic in the
underlying get_sql_insert() etc functions --- there is no caller that
will pass null value-arrays to them.
Per bug report from Robert Voinea.
dblink_build_sql_insert() and related functions. In particular, be sure to
reject references to dropped and out-of-range column numbers. The numbers
are still interpreted as physical column numbers, though, for backward
compatibility.
This patch replaces Joe's patch of 2010-02-03, which handled only some aspects
of the problem.
lock the target relation just once per SQL function call. The original coding
obtained and released lock several times per call. Aside from saving a
not-insignificant number of cycles, this eliminates possible race conditions
if someone tries to modify the relation's schema concurrently. Also
centralize locking and permission-checking logic.
Problem noted while investigating a trouble report from Robert Voinea --- his
problem is still to be fixed, though.
hardcoding a 'template0' check, per suggestion from Alvaro.
This might fix a problem where someone has allowed 'template0'
connections, but it is a cleaner approach even if doesn't fix the
bug.
* There is no chmod() on Windows.
* Must always use the 3-parameter version of open()
* There is no dynloader.h - but it also appears unnecessary on all platforms
* Don't include shlobj.h because it causes compile errors, and from what I can
see it's not actually used. This may need to be added back for mingw
and/or cygwin in the worst case.
cmp parameter for pg_scandir(). The code failed to support this anyway
for Sun/Windows, so pretending we could accept a parameter other than
NULL was just asking for trouble.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
unsatisfiable query, such as indexcol && empty_array. It should return -1
to tell GIN no scan is required; but silly typo disabled the logic for that,
resulting in unnecessary "GIN indexes do not support whole-index scans" error.
Per bug report from Jeff Trout.
Back-patch to 8.3 where the logic was introduced.
writes. The first worker still uses "pgbench_log.<pid>" for the name, but
additional workers use "pgbench_log.<pid>.<serial-number>" instead.
Reported by Greg Smith.
in versions >= 8.3). The core code is more robust and efficient than what
was there before, and this also reduces risks involved in swapping different
libxml error handler settings.
Before 8.3, there is still some risk of problems if add-on modules such as
Perl invoke libxml without setting their own error handler. Given the lack
of reports I'm not sure there's a risk in practice, so I didn't take the
step of actually duplicating the core code into older contrib/xml2 branches.
Instead I just tweaked the existing code to ensure it didn't leave a dangling
pointer to short-lived memory when throwing an error.
This involves modifying the module to have a stable ABI, that is, the
xslt_process() function still exists even without libxslt. It throws a
runtime error if called, but doesn't prevent executing the CREATE FUNCTION
call. This is a good thing anyway to simplify cross-version upgrades.
These are unnecessary and probably dangerous. I don't see any immediate
risk situations in the core XML support or contrib/xml2 itself, but there
could be issues with external uses of libxml2, and in any case it's an
accident waiting to happen.
Get rid of the code that attempted to funnel libxml2's memory allocations
into palloc. We already knew from experience with the core xml datatype
that trying to do this is simply not reliable. Unlike the core code, I
did not bother adding a lot of PG_TRY/PG_CATCH logic to try to ensure that
everything is cleaned up on error exit. Hence, we might leak some memory
if one of these functions fails partway through. Given the deprecated
status of this contrib module and the fact that errors partway through
the functions shouldn't be too common, it doesn't seem worth worrying about.
Also fix a separate bug in xpath_table, that it did the wrong things
if given a result tuple descriptor with less than 2 columns. While
such a case isn't very useful in practice, we shouldn't fail or stomp
memory when it occurs.
Add some simple regression tests based on all the reported crash cases
that I have on hand.
This should be back-patched, but let's see if the buildfarm likes it first.
The main motivation for changing this is bug #4921, in which it's pointed out
that it's no longer safe to apply ltree operations to the result of
ARRAY(SELECT ...) if the sub-select might return no rows. Before 8.3,
the ARRAY() construct would return NULL, which might or might not be helpful
but at least it wouldn't result in an error. Now it returns an empty array
which results in a failure for no good reason, since the ltree operations
are all perfectly capable of dealing with zero-element arrays.
As far as I can find, these ltree functions are the only places where zero
array dimensionality is rejected unnecessarily.
Back-patch to 8.3 to prevent behavioral regression of queries that worked
in older releases.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
exceed the total number of non-dropped source table fields for
dblink_build_sql_*(). Addresses bug report from Rushabh Lathia.
Backpatch all the way to the 7.3 branch.
(SFRM_Materialize mode) to return tuples. Since we don't return from the
dblink function in tuplestore mode, release the PGresult with a PG_CATCH
block on error. Also rearrange to share the same code to materialize the
tuplestore. Patch by Takahiro Itagaki.
This uses the same infrastructure with EXPLAIN BUFFERS to support
{shared|local}_blks_{hit|read|written} andtemp_blks_{read|written}
columns in the pg_stat_statements view. The dumped file format
also updated.
Thanks to Robert Haas for the review.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
Variables must consist of only alphabets, numerals and underscores.
We had allowed to set variables with invalid names, but could not
refer them in queries.
Thanks to Robert Haas for the review.
PL/pgSQL function within an exception handler. Make sure we use the right
resource owner when we create the tuplestore to hold returned tuples.
Simplify tuplestore API so that the caller doesn't need to be in the right
memory context when calling tuplestore_put* functions. tuplestore.c
automatically switches to the memory context used when the tuplestore was
created. Tuplesort was already modified like this earlier. This patch also
removes the now useless MemoryContextSwitch calls from callers.
Report by Aleksei on pgsql-bugs on Dec 22 2009. Backpatch to 8.1, like
the previous patch that broke this.
\shell command runs an external shell command.
\setshell also does the same and sets the result to a variable.
original patch by Michael Paquier with some editorialization by Itagaki,
and reviewed by Greg Smith.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
Without these functions, anyone outside of explain.c can't actually use
ExplainPrintPlan, because the ExplainState won't be initialized properly.
The user-visible result of this was a crash when using auto_explain with
the JSON output format.
Report by Euler Taveira de Oliveira. Analysis by Tom Lane. Patch by me.
processes of a pgbench run, when we are using -j > 1 and are emulating
threads via fork(). Otherwise the children all inherit the same random
sequence state and produce the same random-number sequence.
In the threaded case the different threads will share one RNG state, so
they will produce different subsets of one sequence, which is maybe more
correlated than a purist would like but will not be "the same". So we
leave that case alone.
First noticed by Takahiro Itagaki, and is also part of the explanation
for the pgbench misbehavior recently reported by Jaime Casanova.
in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
strength of database passwords, and create a sample implementation of
such a hook as a new contrib module "passwordcheck".
Laurenz Albe, reviewed by Takahiro Itagaki
Windows doesn't do signal processing like other platforms do. It never
really worked, but recent changes to the signal handling made it crash.
This fixes bug #4961. Patch by Fujii Masao.
Remove the 64K limit on the lengths of keys and values within an hstore.
(This changes the on-disk format, but the old format can still be read.)
Add support for btree/hash opclasses for hstore --- this is not so much
for actual indexing purposes as to allow use of GROUP BY, DISTINCT, etc.
Add various other new functions and operators.
Andrew Gierth
dblink generates orphaned connections when called with a connection string,
fail_on_error = true, and an ERROR occurs. Discovery and patch by
Tatsuhito Kasahara. Introduced in 8.4.
are used to populate the tables with -i, but when running actual benchmark
it has values separately hard-coded in the query metacommands. This patch
makes the metacommands obtain their values from the relevant #defines.
Patch provided by Jeff Janes.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
Adds the ability to retrieve async notifications using dblink,
via the addition of the function dblink_get_notify(). Original patch
by Marcus Kempe, suggestions by Tom Lane and Alvaro Herrera, patch
review and adjustments by Joe Conway.
reviewed by Greg Smith and Josh Williams.
Following is the proposal from ITAGAKI Takahiro:
Pgbench is a famous tool to measure postgres performance, but nowadays
it does not work well because it cannot use multiple CPUs. On the other
hand, postgres server can use CPUs very well, so the bottle-neck of
workload is *in pgbench*.
Multi-threading would be a solution. The attached patch adds -j
(number of jobs) option to pgbench. If the value N is greater than 1,
pgbench runs with N threads. Connections are equally-divided into
them (ex. -c64 -j4 => 4 threads with 16 connections each). It can
run on POSIX platforms with pthread and on Windows with win32 threads.
Here are results of multi-threaded pgbench runs on Fedora 11 with intel
core i7 (8 logical cores = 4 physical cores * HT). -j8 (8 threads) was
the best and the tps is 4.5 times of -j1, that is a traditional result.
$ pgbench -i -s10
$ pgbench -n -S -c64 -j1 => tps = 11600.158593
$ pgbench -n -S -c64 -j2 => tps = 17947.100954
$ pgbench -n -S -c64 -j4 => tps = 26571.124001
$ pgbench -n -S -c64 -j8 => tps = 52725.470403
$ pgbench -n -S -c64 -j16 => tps = 38976.675319
$ pgbench -n -S -c64 -j32 => tps = 28998.499601
$ pgbench -n -S -c64 -j64 => tps = 26701.877815
Is it acceptable to use pthread in contrib module?
If ok, I will add the patch to the next commitfest.
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
last pair of parameter name/value strings, even when there are MAXPARAMS
of them. Aboriginal bug in contrib/xml2, noted while studying bug #4912
(though I'm not sure whether there's something else involved in that
report).
This might be thought a security issue, since it's a potential backend
crash; but considering that untrustworthy users shouldn't be allowed
to get their hands on xslt_process() anyway, it's probably not worth
getting excited about.
file to be a symlink. We tried to fix this issue with an earlier server-side
patch, but it didn't fix the whole issue.
The same bug is present in older releases as well, but the 8.4 train is
about to leave the station, and I'm not sure if have consensus on whether
we can remove the -l option in back-branches or do we need to attempt a
server-side fix to make symlinking safe.
Patch by Simon Riggs, per discussion on bug identified by Fujii Masao.
create an ABI break between 8.3 and 8.4. It is still just a wrapper around
the built-in current_query() function, but at a different implementation
level. Per my proposal.
Note: this change doesn't break 8.4beta installations, since their
SQL-language definition of the function still works fine.
The original implementation of the 3-argument form of get_raw_page() risked
core dumps if the 8.3 SQL function definition was mistakenly used with the
8.4 module, which is entirely likely after a dump-and-reload upgrade. To
protect 8.4 beta testers against upgrade problems, add a check on PG_NARGS.
In passing, fix missed additions to the uninstall script, and polish the
docs a trifle.
the <@ and @> operators. These are not in fact equivalent to the built-in
anyarray operators of the same names, because they have different behavior for
empty arrays, namely they don't think empty arrays are contained in anything.
That is mathematically wrong, no doubt, but until we can persuade GIN indexes
to implement the mathematical definition we should probably not change this.
Another reason for not changing it now is that we can't yet ensure the
opclasses will be updated correctly in a dump-and-reload upgrade. Per
recent discussions.
while we're at it per request by Tom Lane. Specifically, don't try to
perform dblink_send_query() via dblink_record_internal() -- it was
inappropriate and ugly.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
pgbench_history, and pgbench_tellers, rather than just accounts, branches,
history, and tellers. This is to prevent accidental conflicts with real
application tables, as has been reported to happen at least once. Also
remove the automatic "SET search_path = public" that it did at startup,
as this seems to restrict testing flexibility without actually buying much.
Per proposal by Joshua Drake and ensuing discussion.
Joshua Drake and Tom Lane
than having some whitespace discrepancy. Although whitespace is supposed
to be ignored in our regression tests, for some reason buildfarm member
spoonbill doesn't like it.
any negative or positive number, not just -1 or 1. Fix comment on
varstr_cmp and citext test case accordingly.
As pointed out by Zdenek Kotala, and buildfarm member gothic moth.
don't cause confusion with the built-in anyarray versions of those operators.
Adjust the module's index opclasses to support the built-in operators in place
of the private ones.
The private implementations are still available under their historical
names @ and ~, so no functionality is lost. Some quick testing suggests
that they offer no real benefit over the core operators, however.
Per a complaint from Rusty Conover.
temporary tables of other sessions; that is unsafe because of the way our
buffer management works. Per report from Stuart Bishop.
This is redundant with the bufmgr.c checks in HEAD, but not at all redundant
in the back branches.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
not global variables of anonymous enum types. This didn't actually hurt
much because most linkers will just merge the duplicated definitions ...
but some will complain. Per bug #4731 from Ceriel Jacobs.
Backpatch to 8.1 --- the declarations don't exist before that.
reinstalling the default signal handler doesn't work as it is on Windows.
Presumably core dumps on SIGQUIT are not a problem on Windows, so rather
than figure out what header files or other changes are required to make it
work, just don't bother.
postmaster uses for immediate shutdown. Trap SIGUSR1 as the preferred
signal for that.
Per report by Fujii Masao and subsequent discussion on -hackers.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
and change auto_explain's custom GUC variables to be named auto_explain.xxx
not just explain.xxx. Per discussion in connection with the
pg_stat_statements patch, it seems like a good idea to have the convention
that custom variable classes are named the same as their defining module.
Committing separately since this should happen regardless of what happens
with pg_stat_statements itself.
value-per-call mode. This should be more efficient in normal usage,
but the real problem with the prior coding was that it returned with
a SPI call still active. That could cause problems if execution was
interleaved with anything else that might use SPI.
the basic representational details (typlen, typalign, typbyval, typstorage)
to be copied from an existing type rather than listed explicitly in the
CREATE TYPE command. The immediate reason for this is to provide a simple
solution for add-on modules that want to define types represented as int8,
float4, or float8: as of 8.4 the appropriate PASSEDBYVALUE setting is
platform-specific and so it's hard for a SQL script to know what to do.
This patch fixes the contrib/isn breakage reported by Rushabh Lathia.
it was using too soon. In a situation where pg_do_encoding_conversion is
a no-op, this led to garbage data returned.
In HEAD, also modify the code that's ensuring null termination to make it
a tad more obvious what's happening.
citext-to-and-from-xml tests, since those caused variation between
installations with or without libxml without really proving much. Instead
repurpose citext_1.out as the expected results in glibc en_US (and probably
other) locales.
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
pointers. This is only a whitespace change, which ought to be ignored
by regression testing, but for some reason buildfarm member spoonbill
doesn't like it.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
large enough for block numbers higher than 2^31. The old pre-FSM-rewrite
pg_freespacemap implementation got this right. While we're at it, remove
some unnecessary #includes.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
during parsing. Formerly the parser's stack was allocated with malloc
and so wouldn't be reclaimed; this patch makes it use palloc instead,
so that flushing the current context will reclaim the memory. Per
Marko Kreen.
1. -i option should run vacuum analyze only on pgbench tables, not *all*
tables in database.
2. pre-run cleanup step was DELETE FROM HISTORY then VACUUM HISTORY.
This is just a slow version of TRUNCATE HISTORY.
Simon Riggs
of the STRING type category, thereby opening up the mechanism for user-defined
types. This is mainly for the benefit of citext, though; there aren't likely
to be a lot of types that are all general-purpose character strings.
Per discussion with David Wheeler.
by putting it into the standard string category, we cause casts from citext
to text to be recognized as "preferred" casts. This eliminates the need
for creation of alias functions and operators that only serve to prevent
ambiguous-function errors; get rid of the ones that were in the original
commit.
pains to pass the ERROR message components locally, including
using the passed SQLSTATE. Also wrap the passed info in an
appropriate CONTEXT message. Addresses complaint by Henry
Combrinck. Joe Conway, with much good advice from Tom Lane.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
by installing an error context subroutine that will provide the file name
and line number for all errors detected while reading a config file.
Some of the reader routines were already doing that in an ad-hoc way for
errors detected directly in the reader, but it didn't help for problems
detected in subroutines, such as encoding violations.
Back-patch to 8.3 because 8.3 is where people will be trying to debug
configuration files.
calling convention. cube_inter and cube_distance could attempt to pfree
their input arguments, and cube_dim returned a value from a struct it
might have just pfree'd (which would only really cause a problem in a
debug build, but it's still wrong). Per bug #4208 and additional code
reading.
In HEAD and 8.3, I also made a batch of cosmetic changes to bring these
functions into line with the preferred coding style for V1 functions,
ie declare and fetch all the arguments at the top so readers can easily
see what they are.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
parameter. This fixes bug 4137 reported by Wojciech Strzalka, where a WAL
file is deleted too early when starting the recovery of a warm standby server.
Also add a sanity check in pg_standby so that it will refuse to delete anything
earlier than the file being restored, and improve the debug message in case
nothing is deleted.
Simon Riggs. Backpatch to 8.3, which is where %r was introduced.
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
and version-1 if USE_FLOAT8_BYVAL. This might seem a bit pointless, but the
idea is to have at least one regression test that will fail if we ever
accidentally break version-0 functions that return float8. However, they're
already broken, or at least hopelessly unportable, in the USE_FLOAT8_BYVAL
case.
Per a recent suggestion from Greg Stark.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
data. This makes for a significant speedup at the cost that the results
now vary between little-endian and big-endian machines; which forces us
to add explicit ORDER BYs in a couple of regression tests to preserve
machine-independent comparison results. Also, force initdb by bumping
catversion, since the contents of hash indexes will change (at least on
big-endian machines).
Kenneth Marshall and Tom Lane, based on work from Bob Jenkins. This commit
does not adopt Bob's new faster mix() algorithm, however, since we still need
to convince ourselves that that doesn't degrade the quality of the hashing.
