Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user. This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with. In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not. The plperl regression tests contain an example where
this is useful.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.
Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others. This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.
The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes. These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files. If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.
In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).
The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.
Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
The latch infrastructure is now capable of detecting all cases where the
walsender loop needs to wake up, so there is no reason to have an arbitrary
timeout.
Also, modify the walsender loop logic to follow the standard pattern of
ResetLatch, test for work to do, WaitLatch. The previous coding was both
hard to follow and buggy: it would sometimes busy-loop despite having
nothing available to do, eg between receipt of a signal and the next time
it was caught up with new WAL, and it also had interesting choices like
deciding to update to WALSNDSTATE_STREAMING on the strength of information
known to be obsolete.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
We were using GetConfigOption to collect the old value of each setting,
overlooking the possibility that it didn't exist yet. This does happen
in the case of adding a new entry within a custom variable class, as
exhibited in bug #6097 from Maxim Boguk.
To fix, add a missing_ok parameter to GetConfigOption, but only in 9.1
and HEAD --- it seems possible that some third-party code is using that
function, so changing its API in a minor release would cause problems.
In 9.0, create a near-duplicate function instead.
Per discussion, this structure seems more understandable than what was
there before. Make config.sgml and postgresql.conf.sample agree.
In passing do a bit of editorial work on the variable descriptions.
postmaster.log", or nohup.
There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.
This allows deadlock_timeout to be reduced for transactions that are
particularly likely to be involved in a deadlock, thus detecting it
more quickly. It is also potentially useful as a poor-man's deadlock
priority mechanism: a transaction with a high deadlock_timeout is less
likely to be chosen as the victim than one with a low
deadlock_timeout. Since that could be used to game the system, we
make this PGC_SUSET rather than PGC_USERSET.
At some point, it might be worth thinking about a more explicit
priority mechanism, since using this is far from fool-proof. But
let's see whether there's enough use case to justify the additional
work before we go down that route.
Noah Misch, reviewed by Shigeru Hanada
Failure to distinguish these cases is the real cause behind the recent
reports of Windows builds crashing on 'infinity'::timestamp, which was
directly due to failure to establish a value of timezone_abbreviations
in postmaster child processes. The postmaster had the desired value,
but write_one_nondefault_variable() didn't transmit it to backends.
To fix that, invent a new value PGC_S_DYNAMIC_DEFAULT, and be sure to use
that or PGC_S_ENV_VAR (as appropriate) for "default" settings that are
computed during initialization. (We need both because there's at least
one variable that could receive a value from either source.)
This commit also fixes ProcessConfigFile's failure to restore the correct
default value for certain GUC variables if they are set in postgresql.conf
and then removed/commented out of the file. We have to recompute and
reinstall the value for any GUC variable that could have received a value
from PGC_S_DYNAMIC_DEFAULT or PGC_S_ENV_VAR sources, and there were a
number of oversights. (That whole thing is a crock that needs to be
redesigned, but not today.)
However, I intentionally didn't make it work "exactly right" for the cases
of timezone and log_timezone. The exactly right behavior would involve
running select_default_timezone, which we'd have to do independently in
each postgres process, causing the whole database to become entirely
unresponsive for as much as several seconds. That didn't seem like a good
idea, especially since the variable's removal from postgresql.conf might be
just an accidental edit. Instead the behavior is to adopt the previously
active setting as if it were default.
Note that this patch creates an ABI break for extensions that use any of
the PGC_S_XXX constants; they'll need to be recompiled.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
The maximum value of deadlock_timeout, max_standby_archive_delay,
max_standby_streaming_delay, log_min_duration_statement, and
log_autovacuum_min_duration was INT_MAX/1000 milliseconds, which is
about 35min, which is too short for some practical uses. Raise the
maximum value to INT_MAX; the code that uses the parameters already
supports that just fine.
SyncRepRequested() must check not only the value of the
synchronous_replication GUC but also whether max_wal_senders > 0.
Otherwise, we might end up waiting for sync rep even when there's no
possibility of a standby ever managing to connect. There are some
existing cross-checks to prevent this, but they're not quite sufficient:
the user can start the server with max_wal_senders=0,
synchronous_standby_names='', and synchronous_replication=off and then
subsequent make synchronous_standby_names not empty using pg_ctl reload,
and then SET synchronous_standby=on, leading to an indefinite hang.
Along the way, rename the global variable for the synchronous_replication
GUC to match the name of the GUC itself, for clarity.
Report by Fujii Masao, though I didn't use his patch.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
As in commit fb4c5d2798 on 2011-01-21,
this avoids spurious debug messages and allows idempotent changes at
any time. Along the way, make assign_XactIsoLevel allow idempotent
changes even when not within a subtransaction, to be consistent with
the new coding of assign_transaction_read_only and because there's
no compelling reason to do otherwise.
Kevin Grittner, with some adjustments.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
The new coding avoids a spurious debug message when a transaction
that has changed the isolation level has been rolled back. It also
allows the property to be freely changed to the current value within
a subtransaction.
Kevin Grittner, with one small change by me.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
Rather than considering this result as meaning "unknown", report LONG_MAX.
This won't change what superusers can set max_stack_depth to, but it will
cause InitializeGUCOptions() to set the built-in default to 2MB not 100kB.
The latter seems like a fairly unreasonable interpretation of "infinity".
Per my investigation of odd buildfarm results as well as an old complaint
from Heikki.
Since this should persuade all the buildfarm animals to use a reasonable
stack depth setting during "make check", revert previous patch that dumbed
down a recursive regression test to only 5 levels.
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
Normally, we automatically restart after a backend crash, but in some
cases when PostgreSQL is invoked by clusterware it may be desirable to
suppress this behavior, so we provide an option which does this.
Since no existing GUC group quite fits, create a new group called
"error handling options" for this and the previously undocumented GUC
exit_on_error, which is now documented.
Review by Fujii Masao.
log files created by the syslogger process.
In passing, make unix_file_permissions display its value in octal, same
as log_file_mode now does.
Martin Pihlak
Per extensive discussion on pgsql-hackers. We are deliberately not
back-patching this even though the behavior of 8.3 and 8.4 is
unquestionably broken, for fear of breaking existing users of this
parameter. This incompatibility should be release-noted.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
than during define_custom_variable(). This entails rejecting an ALTER
command if the target variable doesn't have a known (non-placeholder)
definition, unless the calling user is superuser. When the variable *is*
known, we can correctly apply the rule that only superusers can issue ALTER
for SUSET parameters. This allows define_custom_variable to apply ALTER's
values for SUSET parameters at module load time, secure in the knowledge
that only a superuser could have set the ALTER value. This change fixes a
longstanding gotcha in the usage of SUSET-level custom parameters; which
is a good thing to fix now that plpgsql defines such a parameter.
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
process. If startup waits on a buffer pin we send a request to all
backends to cancel themselves if they are holding the buffer pin
required and they are also waiting on a lock. If not, startup waits
until max_standby_delay before cancelling any backend waiting for
the requested buffer pin.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
default of "plpgsql". This is more reasonable than it was when the DO patch
was written, because we have since decided that plpgsql should be installed
by default. Per discussion, having a parameter for this doesn't seem useful
enough to justify the risk of application breakage if the value is changed
unexpectedly.
AbortTransaction or AbortSubTransaction, when trying to clean up after an
error that prevented (sub)transaction start from completing:
* access to TopTransactionResourceOwner that might not exist
* assert failure in AtEOXact_GUC, if AtStart_GUC not called yet
* assert failure or core dump in AfterTriggerEndSubXact, if
AfterTriggerBeginSubXact not called yet
Per testing by injecting elog(ERROR) at successive steps in StartTransaction
and StartSubTransaction. It's not clear whether all of these cases could
really occur in the field, but at least one of them is easily exposed by
simple stress testing, as per my accidental discovery yesterday.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
This is more in keeping with modern practice, and is a first step towards
porting to Win64 (which has sizeof(pointer) > sizeof(long)).
Tsutomu Yamada, Magnus Hagander, Tom Lane
Rewrite or adjust various comments for clarity. Remove one bogus comment that
doesn't reflect what the code actually does. Improve the description of the
lo_compat_privileges option.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
to the client by the server. This might seem pretty pointless but apparently
it will help pgbouncer, and perhaps other connection poolers. Anyway it's
practically free to do so for the normal use-case where appname is only set
in the startup packet --- we're just adding a few more bytes to the initial
ParameterStatus response packet. Per comments from Marko Kreen.
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
settings: avoid calling superuser() in contexts where it's not defined,
don't leak the transient copies of GetConfigOption output, and avoid the
whole exercise in postmaster child processes.
I found that actually no current caller of GetConfigOption has any use for
its internal check of GUC_SUPERUSER_ONLY. But rather than just remove
that entirely, it seemed better to add a parameter indicating whether to
enforce the check.
Per report from Simon and subsequent testing.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
functions.
This extends the previous patch that forbade SETting these variables inside
security-definer functions. RESET is equally a security hole, since it
would allow regaining privileges of the caller; furthermore it can trigger
Assert failures and perhaps other internal errors, since the code is not
expecting these variables to change in such contexts. The previous patch
did not cover this case because assign hooks don't really have enough
information, so move the responsibility for preventing this into guc.c.
Problem discovered by Heikki Linnakangas.
Security: no CVE assigned yet, extends CVE-2007-6600
via the "flat files" facility. This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes. Also, its signal handling has
to be brought into line with backends/workers. In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.
Alvaro, with some cleanup from Tom
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
so it doesn't go through BuildTupleFromCStrings. This is more or less a
wash for current uses, but will avoid inefficiency for planned changes to
EXPLAIN.
Robert Haas
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
distinction between the external API (parser.h) and declarations that only
need to be visible within the raw parser code (gramparse.h, which now is only
included by parser.c, gram.y, scan.l, and keywords.c). This is in preparation
for the upcoming change to a reentrant lexer, which will require referencing
YYSTYPE in the declarations of base_yylex and filtered_base_yylex, hence
gram.h will have to be included by gramparse.h. We don't want any more files
than absolutely necessary to depend on gram.h, so some cleanup is called for.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
we failed to assign, even in "can't happen" cases. Motivated by wondering
what's going on in a recent trouble report where "failed to commit" did
happen.
to 100ms (from 1000). This still seems to be comfortably larger than the
useful range of the parameter, and it should help discourage people from
picking uselessly large values. Tweak the documentation to recommend small
values, too. Per discussion of a couple weeks ago.
GUC variable effective_io_concurrency controls how many concurrent block
prefetch requests will be issued.
(The best way to handle this for plain index scans is still under debate,
so that part is not applied yet --- tgl)
Greg Stark
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
particular this allows EmitWarningsOnPlaceholders messages to show up in the
postmaster log by default. Update elog.h comment to make it clearer what INFO
is for, and fix one example in the SGML docs that was misusing it. Per my
gripe of yesterday.
when loaded via shared_preload_libraries. Needed for support of
pg_stat_statements, or pretty much anything else that wants a GUC to
control size of a shared memory allocation.
and change auto_explain's custom GUC variables to be named auto_explain.xxx
not just explain.xxx. Per discussion in connection with the
pg_stat_statements patch, it seems like a good idea to have the convention
that custom variable classes are named the same as their defining module.
Committing separately since this should happen regardless of what happens
with pg_stat_statements itself.
* Refactor explain.c slightly to export a convenient-to-use subroutine
for printing EXPLAIN results.
* Provide hooks for plugins to get control at ExecutorStart and ExecutorEnd
as well as ExecutorRun.
* Add some minimal support for tracking the total runtime of ExecutorRun.
This code won't actually do anything unless a plugin prods it to.
* Change the API of the DefineCustomXXXVariable functions to allow nonzero
"flags" to be specified for a custom GUC variable. While at it, also make
the "bootstrap" default value for custom GUCs be explicitly specified as a
parameter to these functions. This is to eliminate confusion over where the
default comes from, as has been expressed in the past by some users of the
custom-variable facility.
* Refactor GUC code a bit to ensure that a custom variable gets initialized to
something valid (like its default value) even if the placeholder value was
invalid.
specifically, we can input either the "format with designators" or the
"alternative format", and we can output the former when IntervalStyle is set
to iso_8601.
Ron Mayer
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
debug_print_plan to appear at LOG message level, not DEBUG1 as historically.
Make debug_pretty_print default to on. Also, cause plans generated via
EXPLAIN to be subject to debug_print_plan. This is all to make
debug_print_plan a reasonably comfortable substitute for the former behavior
of EXPLAIN VERBOSE.
variable stats_temp_directory, instead of requiring the admin to
mount/symlink the pg_stat_tmp directory manually.
For now the config variable is PGC_POSTMASTER. Room for further improvment
that would allow it to be changed on-the-fly.
default_reloptions(). The previous coding was really a bug because pg_atoi()
will always throw elog on bad input data, whereas default_reloptions is not
supposed to complain about bad input unless its validate parameter is true.
Right now you could only expose the problem by hand-modifying
pg_class.reloptions into an invalid state, so it doesn't seem worth
back-patching; but we should get it right in HEAD because there might be other
situations in future. Noted while studying GIN fast-update patch.
wal_segment_size to make those configuration parameters available to clients,
in the same way that block_size was previously exposed. Bernd Helmle, with
comments from Abhijit Menon-Sen and some further tweaking by me.
variable that has units. Per report from Stefan Kaltenbrunner.
Backport to 8.2. I also backported my patch of 2007-06-21 that prevented
comparable overflows on the input side, since that now seems to have enough
field track record to be back-patched safely. That patch included addition
of hints listing the available unit names, which I did not bother to strip
out of it --- this will make a little more work for the translators, but
they can copy the translation from 8.3, and anyway an untranslated hint
is better than no hint.
one for client-side, restoring the previous behaviour with different
sort order for the 'log' level. Also, remove redundant list of available
options, since the enum code will output it automatically.
As the buffer could now be a lot larger than before, and copying it could
thus be a lot more expensive than before, use strcpy instead of memcpy to
copy the query string, as was already suggested in comments. Also, only copy
the PgBackendStatus struct and string if the slot is in use.
Patch by Thomas Lee, with some changes by me.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
it vary with BLCKSZ as before. This agrees with what the documentation says,
and avoids a regression test problem when BLCKSZ is larger than default.
Per recent discussion.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
With the addition of multiple autovacuum workers, our choices were to delete
the check, document the interaction with autovacuum_max_workers, or complicate
the check to try to hide that interaction. Since this restriction has never
been adequate to ensure backends can't run out of pinnable buffers, it doesn't
really have enough excuse to live to justify the second or third choices.
Per discussion of a complaint from Andreas Kling (see also bug #3888).
This commit also removes several documentation references to this restriction,
but I'm not sure I got them all.
were reporting ERROR for interactive assignments and LOG for other cases,
some were saying nothing for non-interactive cases, and a few did yet other
things. Make them use a new function GUC_complaint_elevel() to establish
a reasonably uniform policy about how to report. There are still a few
edge cases such as assign_search_path(), but it's much better than before.
Per gripe from Devrim Gunduz and subsequent discussion.
As noted by Alvaro, it'd be better to fold these custom messages into the
standard "invalid parameter value" complaint from guc.c, perhaps as the DETAIL
field. However that will require more redesign than seems prudent for 8.3.
This is a relatively safe, low-impact change that we can afford to risk now.
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
to validate the realm of the connecting user. By default
it's empty meaning no verification, which is the way
Kerberos authentication has traditionally worked in
PostgreSQL.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
and in passing, fix some bogosities dating from the custom_variable_classes
patch. Fix guc-file.l to correctly check changes in custom_variable_classes
that are attempted concurrently with additions/removals of custom variables,
and don't allow the new setting to be applied in advance of checking it.
Clean up messy and undocumented situation for string variables with NULL
boot_val. Fix DefineCustomVariable functions to initialize boot_val
correctly. Prevent find_option from inserting bogus placeholders for custom
variables that are simply inquired about rather than being set.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
between the setting of log_line_prefix and the setting of log_timezone. We
can't realistically set log_timezone any earlier than we do now, so the best
behavior seems to be to use GMT zone if any timestamps are to be logged during
early startup. Create a dummy zone variable with a minimal definition of GMT
(in particular it will never know about leap seconds), so that we can set it
up without reference to any external files.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
Tom Lane
Simon Riggs
Peter Eisentraut
Heikki Linnakangas
Robert Haas
Bruce Momjian
Magnus Hagander
Itagaki Takahiro
Alvaro Herrera
Andrew Dunstan