Since 6bc8ef0b, InitializeMaxBackends() has used max_worker_processes
instead of adapting MaxBackends to the number of background workers
registered by modules loaded in shared_preload_libraries (at this time,
bgworkers were only static, but gained dynamic capabilities as a matter
of supporting parallel queries meaning that a control cap was
necessary).
Some comments referred to the past registration logic, making them
confusing and incorrect, so fix these.
Some of the out-of-core modules that could be loaded in this path
sometimes like to manipulate dynamically some of the resource-related
GUCs for their own needs, this commit adds a note about that.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20220127181815.GA551692@nathanxps13
c532d15 has split the logic of COPY commands into multiple files, one
change being to move the internals of BeginCopy() to BeginCopyTo().
Originally the code was written so as we'd switch back-and-forth between
the current execution memory context and the dedicated memory context
for the COPY command, and this refactoring has introduced an extra
switch to the current memory context from the COPY context once
BeginCopyTo() is done with the past logic coming from BeginCopy().
The code was correctly doing the analyze, rewrite and planning phases in
the COPY context, but it was not assigning "copy_file" (FILE* used when
copying to a source file) and "filename" in the COPY context, making the
COPY status data inconsistent.
Author: Bharath Rupireddy
Reviewed-by: Japin Li
Discussion: https://postgr.es/m/CALj2ACWvVa69foi9jhHFY=2BuHxAoYboyE+vXQTARwxZcJnVrQ@mail.gmail.com
Backpatch-through: 14
I had made it depend on superuser, but that seems clearly inferior.
Also document the permissions requirement in the straming replication
protocol section of the documentation, rather than only in the
section having to do with pg_basebackup.
Idea and patch from Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/87bkzw160u.fsf@wibble.ilmari.org
When pg_log_backend_memory_contexts() is executed, the target backend
should use LOG_SERVER_ONLY to log its memory contexts, to prevent them
from being sent to its connected client regardless of client_min_messages.
But previously the backend unexpectedly used LOG to log the message
"logging memory contexts of PID %d" and it could be sent to the client.
This is a bug in memory context logging.
To fix the bug, this commit changes that message so that it's logged with
LOG_SERVER_ONLY.
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/82c12f36-86f7-5e72-79af-7f5c37f6cad7@oss.nttdata.com
Commit 8431e296ea reworked ProcArrayApplyRecoveryInfo to sort XIDs
before adding them to KnownAssignedXids. But the XIDs are sorted using
xidComparator, which compares the XIDs simply as uint32 values, not
logically. KnownAssignedXidsAdd() however expects XIDs in logical order,
and calls TransactionIdFollowsOrEquals() to enforce that. If there are
XIDs for which the two orderings disagree, an error is raised and the
recovery fails/restarts.
Hitting this issue is fairly easy - you just need two transactions, one
started before the 4B limit (e.g. XID 4294967290), the other sometime
after it (e.g. XID 1000). Logically (4294967290 <= 1000) but when
compared using xidComparator we try to add them in the opposite order.
Which makes KnownAssignedXidsAdd() fail with an error like this:
ERROR: out-of-order XID insertion in KnownAssignedXids
This only happens during replica startup, while processing RUNNING_XACTS
records to build the snapshot. Once we reach STANDBY_SNAPSHOT_READY, we
skip these records. So this does not affect already running replicas,
but if you restart (or create) a replica while there are transactions
with XIDs for which the two orderings disagree, you may hit this.
Long-running transactions and frequent replica restarts increase the
likelihood of hitting this issue. Once the replica gets into this state,
it can't be started (even if the old transactions are terminated).
Fixed by sorting the XIDs logically - this is fine because we're dealing
with normal XIDs (because it's XIDs assigned to backends) and from the
same wraparound epoch (otherwise the backends could not be running at
the same time on the primary node). So there are no problems with the
triangle inequality, which is why xidComparator compares raw values.
Investigation and root cause analysis by Abhijit Menon-Sen. Patch by me.
This issue is present in all releases since 9.4, however releases up to
9.6 are EOL already so backpatch to 10 only.
Reviewed-by: Abhijit Menon-Sen
Reviewed-by: Alvaro Herrera
Backpatch-through: 10
Discussion: https://postgr.es/m/36b8a501-5d73-277c-4972-f58a4dce088a%40enterprisedb.com
This changes the data type of the catalog fields datcollate, datctype,
collcollate, and collctype from name to text. There wasn't ever a
really good reason for them to be of type name; presumably this was
just carried over from when they were fixed-size fields in pg_control,
first into the corresponding pg_database fields, and then to
pg_collation. The values are not identifiers or object names, and we
don't ever look them up that way.
Changing to type text saves space in the typical case, since locale
names are typically only a few bytes long. But it is also possible
that an ICU locale name with several customization options appended
could be longer than 63 bytes, so this also enables that case, which
was previously probably broken.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a@2ndquadrant.com
For authentication method cert, clientcert=verify-full is implied. But
the pg_hba_file_rules entry would incorrectly show clientcert=verify-ca.
Per bug #17354
Reported-By: Feike Steenbergen
Reviewed-By: Jonathan Katz
Backpatch-through: 12
8edd0e794 added some code to remove Append and MergeAppend nodes when they
contained a single child node. As it turned out, this was unsafe to do
when the Append/MergeAppend was parallel_aware and the child node was not.
Removing the Append/MergeAppend, in this case, could lead to the child plan
being called multiple times by parallel workers when it was unsafe to do
so.
Here we fix this by just not removing the Append/MergeAppend when the
parallel_aware flag of the parent and child node don't match.
Reported-by: Yura Sokolov
Bug: #17335
Discussion: https://postgr.es/m/b59605fecb20ba9ea94e70ab60098c237c870628.camel%40postgrespro.ru
Backpatch-through: 12, where 8edd0e794 was first introduced
WAL replay would cause a hard crash if the timeline expected by a
XLOG_END_OF_RECOVERY, a XLOG_CHECKPOINT_ONLINE, or a
XLOG_CHECKPOINT_SHUTDOWN record is not the same as the timeline being
replayed, using the same error message for all three of them. This
commit changes those error messages to use different wordings, adapted
to each record type, which is useful when it comes to the debugging of
an issue in this area.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Robert Haas
Discussion: https://postgr.es/m/CAAJ_b97i1ZerYC_xW6o_AiDSW5n+sGi8k91Yc8KS8bKWKxjqwQ@mail.gmail.com
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
Without this, we get odd behavior when the previous cycle of
lexing exited in a non-default exclusive state. Every other
copy of this code is aware that it has to do BEGIN(INITIAL),
but repl_scanner.l did not get that memo.
The real-world impact of this is probably limited, since most
replication clients would abandon their connection after getting
a syntax error. Still, it's a bug.
This mistake is old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1874781.1643035952@sss.pgh.pa.us
Commit 5c649fe15 introduced a memory leak into pg_basebackup's
parse_compress_options. (I simplified nearby code while at it.)
Commit 9a974cbcb introduced a memory leak into pg_dump's
binary_upgrade_set_pg_class_oids.
Coverity also complained about a call of SnapBuildProcessChange that
ignored the result, unlike every other call of that function. This
is evidently intentional, so add a (void) cast to indicate that.
(It's also old, dating to b89e15105; I suppose the reason it showed
up now is 7a5f6b474's recent rearrangement of nearby code.)
In the normal configuration where GEQO_DEBUG isn't defined,
recent clang versions have started to complain that geqo_main.c
accumulates the edge_failures count but never does anything
with it. As a minimal back-patchable fix, insert a void cast
to silence this warning. (I'd speculated about ripping out the
GEQO_DEBUG logic altogether, but I don't think we'd wish to
back-patch that.)
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
an annoying compiler warning but changes no behavior. Hence,
back-patch all the way to 9.2.
Discussion: https://postgr.es/m/CA+hUKGLTSZQwES8VNPmWO9AO0wSeLt36OCPDAZTccT1h7Q7kTQ@mail.gmail.com
In sort_inner_and_outer we iterate a list of PathKey elements, but the
variable is declared as (List *). This mistake is benign, because we
only pass the pointer to lcons() and never dereference it.
This exists since ~2004, but it's confusing. So fix and backpatch to all
supported branches.
Backpatch-through: 10
Discussion: https://postgr.es/m/bf3a6ea1-a7d8-7211-0669-189d5c169374%40enterprisedb.com
The syscache lookup may return NULL even for valid OID, for example due
to a concurrent DROP STATISTICS, so a HeapTupleIsValid is necessary.
Without it, it may fail with a segfault.
Reported by Alexander Lakhin, patch by me. Backpatch to 13, where ALTER
STATISTICS ... SET STATISTICS was introduced.
Backpatch-through: 13
Discussion: https://postgr.es/m/17372-bf3b6e947e35ae77%40postgresql.org
Putting "inline" on a function that's not used anywhere in its
own file is useless unless the linker is doing global optimization,
a method we don't generally enable. Moreover, it draws warnings
from some buildfarm members (curculio at least).
Looks like this was sloppiness in cc8b25712, which moved the
function from somewhere else where the inline marker was
more appropriate.
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
Previously, callers of pg_newlocale_from_collation() did not call it
if the collation was DEFAULT_COLLATION_OID and instead proceeded with
a pg_locale_t of 0. Instead, now we call it anyway and have it return
0 if the default collation was passed. It already did this, so we
just have to adjust the callers. This simplifies all the call sites
and also makes future enhancements easier.
After discussion and testing, the previous comment in pg_locale.c
about avoiding this for performance reasons may have been mistaken
since it was testing a very different patch version way back when.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/ed3baa81-7fac-7788-cc12-41e3f7917e34@enterprisedb.com
bbsink_copystream wants to store a type byte just before the buffer,
but basebackup.c wants the buffer to be aligned so that it can call
PageIsNew() and PageGetLSN() on it. Therefore, instead of inserting
1 extra byte before the buffer, insert MAXIMUM_ALIGNOF extra bytes
and only use the last one.
On most machines this doesn't cause any problem (except perhaps for
performance) but some buildfarm machines with -fsanitize=alignment
dump core.
Discussion: http://postgr.es/m/CA+TgmoYx5=1A2K9JYV-9zdhyokU4KKTyNQ9q7CiXrX=YBBMWVw@mail.gmail.com
In the new approach, all files across all tablespaces are sent in a
single COPY OUT operation. The CopyData messages are no longer raw
archive content; rather, each message is prefixed with a type byte
that describes its purpose, e.g. 'n' signifies the start of a new
archive and 'd' signifies archive or manifest data. This protocol
is significantly more extensible than the old approach, since we can
later create more message types, though not without concern for
backward compatibility.
The new protocol sends a few things to the client that the old one
did not. First, it sends the name of each archive explicitly, instead
of letting the client compute it. This is intended to make it easier
to write future patches that might send archives in a format other
that tar (e.g. cpio, pax, tar.gz). Second, it sends explicit progress
messages rather than allowing the client to assume that progress is
defined by the number of bytes received. This will help with future
features where the server compresses the data, or sends it someplace
directly rather than transmitting it to the client.
The old protocol is still supported for compatibility with previous
releases. The new protocol is selected by means of a new
TARGET option to the BASE_BACKUP command. Currently, the
only supported target is 'client'. Support for additional
targets will be added in a later commit.
Patch by me. The patch set of which this is a part has had review
and/or testing from Jeevan Ladhe, Tushar Ahuja, Suraj Kharage,
Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
BufferGetBlockNumber() is not that cheap and obviously cannot change during
one heap_prune_page(), so only call it once. We might be able to do better and
pass the block number from the caller, but that'd be a larger change...
Discussion: https://postgr.es/m/20211211045710.ljtuu4gfloh754rs@alap3.anarazel.de
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
The token in nodeTokenType() is actually the whole rest of the string,
so we need to take into account the length to do the correct
comparison.
Without this, postgres_fdw tests fail under
-DWRITE_READ_PARSE_PLAN_TREES.
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
The log_autovacuum_min_duration instrumentation used its own dedicated
code for logging, which was not reused by VACUUM VERBOSE. This was
highly duplicative, and sometimes led to each code path using slightly
different accounting for essentially the same information.
Clean things up by making VACUUM VERBOSE reuse the same instrumentation
code. This code restructuring changes the structure of the VACUUM
VERBOSE output itself, but that seems like an overall improvement. The
most noticeable change in VACUUM VERBOSE output is that it no longer
outputs a distinct message per index per round of index vacuuming. Most
of the same information (about each index) is now shown in its new
per-operation summary message. This is far more legible.
A few details are no longer displayed by VACUUM VERBOSE, but that's no
real loss in practice, especially in the common case where we don't need
multiple index scans/rounds of vacuuming. This super fine-grained
information is still available via DEBUG2 messages, which might still be
useful in debugging scenarios.
VACUUM VERBOSE now shows new instrumentation, which is typically very
useful: all of the log_autovacuum_min_duration instrumentation that it
missed out on before now. This includes information about WAL overhead,
buffers hit/missed/dirtied information, and I/O timing information.
VACUUM VERBOSE still retains a few INFO messages of its own. This is
limited to output concerning the progress of heap rel truncation, as
well as some basic information about parallel workers. These details
are still potentially quite useful. They aren't a good fit for the log
output, which must summarize the whole operation.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmW4Me7_qR4X4ka7pxP-jGmn7=Npma_-Z-9Y1eD0MQRLw@mail.gmail.com
Provide a developer-only GUC allow_in_place_tablespaces, disabled by
default. When enabled, tablespaces can be created with an empty
LOCATION string, meaning that they should be created as a directory
directly beneath pg_tblspc. This can be used for new testing scenarios,
in a follow-up patch. Not intended for end-user usage, since it might
confuse backup tools that expect symlinks.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Get rid of the three-valued logic for the Boolean variables to track
whether the value was been specified and what the new value should be.
Instead, we can use the "dfoo" variables to determine whether the
value was specified and should be applied. This was already done in
some cases, so this makes this more uniform and removes one layer of
indirection.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
Corruption of redirect item pointers often only becomes visible well after
being corrupted, as e.g. bug #17255 shows: In the original reproducer,
gigabyte of WAL were between the source of the corruption and the corruption
becoming visible.
To make it easier to find / prevent such bugs, verify whether redirect
pointers are sensible at the end of heap_page_prune_execute(). 5cd7eb1f1c
introduced related assertions while modifying the page, but they can't easily
detect marking the target of an existing redirect as unused. Sometimes the
corruption will be detected later, but that's harder to diagnose.
Author: Andres Freund <andres@andres@anarazel.de>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb@alap3.anarazel.de
Michael Paquier
Peter Geoghegan
Robert Haas
Peter Eisentraut
Etsuro Fujita
Fujii Masao
Tomas Vondra
Magnus Hagander
David Rowley
Tom Lane
Andres Freund
Jeff Davis
Amit Kapila
Thomas Munro