for views. Views are now have a "relkind" of
RELKIND_VIEW instead of RELKIND_RELATION.
Also, views no longer have actual heap storage
files.
The following changes were made
1. CREATE VIEW sets the new relkind
2. The executor complains if a DELETE or
INSERT references a view.
3. DROP RULE complains if an attempt is made
to delete a view SELECT rule.
4. CREATE RULE "_RETmytable" AS ON SELECT TO mytable DO INSTEAD ...
1. checks to make sure mytable is empty.
2. sets the relkind to RELKIND_VIEW.
3. deletes the heap storage files.
5. LOCK myview is not allowed. :)
6. the regression test type_sanity was changed to
account for the new relkind value.
7. CREATE INDEX ON myview ... is not allowed.
8. VACUUM myview is not allowed.
VACUUM automatically skips views when do the entire
database.
9. TRUNCATE myview is not allowed.
THINGS LEFT TO THINK ABOUT
o pg_views
o pg_dump
o pgsql (\d \dv)
o Do we really want to be able to inherit from views?
o Is 'DROP TABLE myview' OK?
--
Mark Hollomon
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
pg_proc.c (where it's actually used). Fix it to correctly handle tlists
that contain resjunk target items, and improve error messages. This
addresses bug reported by Krupnikov 6-July-00.
macros where appropriate (the code used to have several different ways
of doing that, including Int32, Int8, UInt8, ...). Remove last few
references to float32 and float64 typedefs --- it's all float4/float8
now. The typedefs themselves should probably stay in c.h for a release
or two, though, to avoid breaking user-written C functions.
These two routines will now ALWAYS elog() on failure, whether you ask for
a lock or not. If you really want to get a NULL return on failure, call
the new routines heap_open_nofail()/heap_openr_nofail(). By my count there
are only about three places that actually want that behavior. There were
rather more than three places that were missing the check they needed to
make under the old convention :-(.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
memory contexts. Currently, only leaks in expressions executed as
quals or projections are handled. Clean up some old dead cruft in
executor while at it --- unused fields in state nodes, that sort of thing.
functional.
Handle include file installation in src/include/Makefile
genbki.sh improvements: Don't substitute anything by config.status,
instead pass in AWK and CPP through environment. Change calling
convention to support named output files, so we get to see error
messages on stderr.
Rename bootstrap template files and install them into PREFIX/share.
Update initdb to that effect and other readability improvements
in initdb.
Special handling of TOAST relations during VACUUM. TOAST relations
are vacuumed while the lock on the master table is still active.
The ANALYZE flag doesn't propagate to their vacuuming because the
toaster access routines allways use index access ignoring stats, so
why compute them at all.
Protection of TOAST relations against normal INSERT/UPDATE/DELETE
while offering SELECT for debugging purposes.
Jan
Don't go through pg_exec_query_dest(), but directly to the execution
routines. Also, extend parameter lists so that there's no need to
change the global setting of allowSystemTableMods, a hack that was
certain to cause trouble in the event of any error.
entry that has rules. This allows us to release the rule parsetrees
on relcache flush without needing a working freeObject() routine.
Formerly, the rule trees were leaked permanently at relcache flush.
Also, clean up handling of rule creation and deletion --- there was
not sufficient locking of the relation being modified, and there was
no reliable notification of other backends that a relcache reload
was needed. Also, clean up relcache.c code so that scans of system
tables needed to load a relcache entry are done in the caller's
memory context, not in CacheMemoryContext. This prevents any
un-pfreed memory from those scans from becoming a permanent memory
leak.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
passing the index-is-unique flag to index build routines (duh! ...
why wasn't it done this way to begin with?). Aside from eliminating
an eyesore, this should save a few milliseconds in btree index creation
because a full scan of pg_index is not needed any more.
discussion of 5/19/00). pg_index is now searched for indexes of a
relation using an indexscan. Moreover, this is done once and cached
in the relcache entry for the relation, in the form of a list of OIDs
for the indexes. This list is used by the parser and executor to drive
lookups in the pg_index syscache when they want to know the properties
of the indexes. Net result: index information will be fully cached
for repetitive operations such as inserts.
pointers, namely the catcache tuple fetch routines. Also get rid of
the unused and possibly confusing 'size' field in struct cachedesc.
Since it doesn't allow for variable-length fields, anyone who
actually trusted it would likely be making a mistake...
no reason for them to be copied into src/backend rather than being
installed straight from the catalog subdirectory. This also avoids
some peculiar behavior (bugs?) present in at least gmake 3.78.1: it
won't always update the bki files in backend/ even when the ones in
backend/catalog/ are newer.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
would crash, due to premature invocation of SetQuerySnapshot(). Clean
up problems with handling of multiple queries by splitting
pg_parse_and_plan into two routines. The old code would not, for
example, do the right thing with END; SELECT... submitted in one query
string when it had been in transaction abort state, because it'd decide
to skip planning the SELECT before it had executed the END. New
arrangement is simpler and doesn't force caller to plan if only
parse+rewrite is needed.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
SELECT a FROM t1 tx (a);
Allow join syntax, including queries like
SELECT * FROM t1 NATURAL JOIN t2;
Update RTE structure to hold column aliases in an Attr structure.
syscache and relcache flushes). Relcache entry rebuild now preserves
original tupledesc, rewrite rules, and triggers if possible, so that pointers
to these things remain valid --- if these things change while relcache entry
has positive refcount, we elog(ERROR) to avoid later crash. Arrange for
xact-local rels to be rebuilt when an SI inval message is seen for them,
so that they are updated by CommandCounterIncrement the same as regular rels.
(This is useful because of Hiroshi's recent changes to process our own SI
messages at CommandCounterIncrement time.) This allows simplification of
some routines that previously hacked around the lack of an automatic update.
catcache now keeps its own copy of tupledesc for its relation, rather than
depending on the relcache's copy; this avoids needing to reinitialize catcache
during a cache flush, which saves some cycles and eliminates nasty circularity
problems that occur if a cache flush happens while trying to initialize a
catcache.
Eliminate a number of permanent memory leaks that used to happen during
catcache or relcache flush; not least of which was that catcache never
freed any cached tuples! (Rule parsetree storage is still leaked, however;
will fix that separately.)
Nothing done yet about code that uses tuples retrieved by SearchSysCache
for longer than is safe.
from a constraint condition does not violate the constraint (cf. discussion
on pghackers 12/9/99). Implemented by adding a parameter to ExecQual,
specifying whether to return TRUE or FALSE when the qual result is
really NULL in three-valued boolean logic. Currently, ExecRelCheck is
the only caller that asks for TRUE, but if we find any other places that
have the wrong response to NULL, it'll be easy to fix them.
CommandCounterIncrement to make new relation visible before trying to
parse/deparse the expressions. Also, eliminate unnecessary
setheapoverride calls in AddNewAttributeTuples.
functions, which would lead to trouble with datatypes that paid attention
to the typelem or typmod parameters to these functions. In particular,
incorrect code in pg_aggregate.c explains the platform-specific failures
that have been reported in NUMERIC avg().
relcache entry no longer leaks a small amount of memory. index_endscan
now releases all the memory acquired by index_beginscan, so callers of it
should NOT pfree the scan descriptor anymore.
By dropping stats rows here, we eliminate the need for VACUUM to do a
wholesale remove of stats rows. Before, pg_statistics was wiped clean
at the start of VACUUM, ensuring poor planning results for any backends
running in parallel until VACUUM got around to rebuilding the stats for
the relations they are accessing.
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
of the index it wants to destroy. This ensures that no other backend is
actively scanning or updating that index. Getting exclusive access on
the index alone is NOT sufficient, because the executor is rather
cavalier about getting locks on indexes --- see ExecOpenIndices().
It might be better to grab index locks in the executor, but I'm not
sure the extra lockmanager traffic is really worth it just to make
index_destroy cleaner.
Now indexes of pg_class and pg_type are unique indexes
and guarantee the uniqueness of correponding attributes.
heap_create() was changed to take another boolean parameter
which allows to postpone the creation of disk file.
The name of rd_nonameunlinked was changed to rd_unlinked.
It is used generally(not only for noname relations) now.
Requires initdb.
The following patch extends the COMMENT ON functionality to the
rest of the database objects beyond just tables, columns, and views. The
grammer of the COMMENT ON statement now looks like:
COMMENT ON [
[ DATABASE | INDEX | RULE | SEQUENCE | TABLE | TYPE | VIEW ] <objname>
|
COLUMN <relation>.<attribute> |
AGGREGATE <aggname> <aggtype> |
FUNCTION <funcname> (arg1, arg2, ...) |
OPERATOR <op> (leftoperand_typ rightoperand_typ) |
TRIGGER <triggername> ON relname>
Mike Mascari
(mascarim@yahoo.com)
>From the ORACLE 7 SQL Language Reference Manual:
-----------------------------------------------------
COMMENT
Purpose:
To add a comment about a table, view, snapshot, or
column into the data dictionary.
Prerequisites:
The table, view, or snapshot must be in your own
schema
or you must have COMMENT ANY TABLE system privilege.
Syntax:
COMMENT ON [ TABLE table ] |
[ COLUMN table.column] IS 'text'
You can effectively drop a comment from the database
by setting it to the empty string ''.
-----------------------------------------------------
Example:
COMMENT ON TABLE workorders IS
'Maintains base records for workorder information';
COMMENT ON COLUMN workorders.hours IS
'Number of hours the engineer worked on the task';
to drop a comment:
COMMENT ON COLUMN workorders.hours IS '';
The current patch will simply perform the insert into
pg_description, as per the TODO. And, of course, when
the table is dropped, any comments relating to it
or any of its attributes are also dropped. I haven't
looked at the ODBC source yet, but I do know from
an ODBC client standpoint that the standard does
support the notion of table and column comments.
Hopefully the ODBC driver is already fetching these
values from pg_description, but if not, it should be
trivial.
Hope this makes the grade,
Mike Mascari
(mascarim@yahoo.com)
quite the same way that transformInsertStatement does, so that an expression
could be accepted by CREATE TABLE and then fail when used. Also, put back
check that CONSTRAINT expressions must yield boolean...
expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
We can't support these properly, since once the relation's physical files
are unlinked, there's no way to roll back the transaction. I suppose
we could postpone the unlink till transaction commit, but then what of
BEGIN; DROP TABLE foo; CREATE TABLE foo; ?
The code does allow dropping a table/index created in the current
transaction block, however, since the post-abort state would be that
the table doesn't exist anyway.
segments, and my indexes had 3(Yes, it DOES work!).
DROP TABLE removed ALL segments from the table, but only the main index
segment.
So it looks like removing the table itself is using mdunlink in md.c,
while removing indexes uses FileNameUnlink() which only unlinks 1 file.
As far as I can tell, calling FileNameUnlink() and mdunlink() is basically
the same, except mdunlink() deletes any extra segments.
I've done some testing and it seems to work. It also passes regression
tests(except float8, geometry and rules, but that's normal).
If this patch is right, this fixes all known multi-segment problems on
Linux.
Ole Gjerde
lists are now plain old garden-variety Lists, allocated with palloc,
rather than specialized expansible-array data allocated with malloc.
This substantially simplifies their handling and eliminates several
sources of memory leakage.
Several basic types of erroneous queries (syntax error, attempt to
insert a duplicate key into a unique index) now demonstrably leak
zero bytes per query.
relation, rather than zeroes. This prevents the optimizer from making
foolish choices (ie, using nested-loop plans) on never-yet-vacuumed tables.
This is a hack, of course. Keeping accurate track of these statistics
would be a cleaner solution, but it's far from clear that it'd be worth
the cost of doing so. In any case we're not going to do that for 6.5.
In the meantime, this quick hack provides a useful performance improvement
in the regression tests and in many real-world scenarios.
not-yet-defined operator in commutator, negator, etc links. This is
necessary in order to ensure that a pg_dump dump of user-defined operators
can be reloaded. There may still be a bug lurking here, because it's
provoking a 'Buffer Leak' notice message in one case. See my mail to
pgsql-hackers.
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
a field was labelled as a primary key, the system automatically
created a unique index on the field. This patch extends it so
that the index has the indisprimary field set. You can pull a list
of primary keys with the followiing select.
SELECT pg_class.relname, pg_attribute.attname
FROM pg_class, pg_attribute, pg_index
WHERE pg_class.oid = pg_attribute.attrelid AND
pg_class.oid = pg_index.indrelid AND
pg_index.indkey[0] = pg_attribute.attnum AND
pg_index.indisunique = 't';
There is nothing in this patch that modifies the template database to
set the indisprimary attribute for system tables. Should they be
changed or should we only be concerned with user tables?
D'Arcy
destructions in 6.4 source using purify.
(1) parser/gram.y:fmtId()
It writes n+3 bytes into n+1 byte-long memory area if mixed case or
non-ascii identifiers given.
(2) catalog/index.c:
ATTRIBUTE_TUPLE_SIZE bytes are allocated but
sizeof(FormData_pg_attribute) bytes are written. Note that
ATTRIBUTE_TUPLE_SIZE is smaller than
sizeof(FormData_pg_attribute). (for example, on solaris 2.6,
Tatsuo Ishii
I don't know if this is really related to the initdb problem
discussion (haven't followed it enough). But seems so because
it fixes a damn problem during index tuple insertion on
CREATE TABLE into pg_attribute_relid_attnum_index.
Anyway - this bug was really hard to find. During startup the
relcache reads in some prepared information about index
strategies from a file and then reinitializes the function
pointers inside the scanKey data. But for sake it assumed
single attribute index tuples (hasn't that changed recently).
Thus not all the strategies scanKey entries where initialized
properly, resulting in invalid addresses for the btree
comparision functions.
With the patch at the end the regression tests passed
excellent except for the sanity_check that crashed at vacuum
and the misc test where the select unique1 from onek2 outputs
the two rows in different order.
Jan
(Mark or Bruce?) It fixes a problem when cpp gives a warning when
precompiling /dev/null like: "/dev/null", line 1: 1506-229 (W)
File is empty. This leads to a hangup when doing the description
load during initdb, since stderr also ends up in the global1.description
and local1_template1.description
stderr has to be redirected to /dev/null:
Andreas Zeugswetter
Thanks. But patches for src/backend/catalog/Makefile seems missing
in the current source tree. Please apply attached patches.
It also includes some corrections to src/backend/util/mb/wchar.c.
-- Tatsuo Ishii t-ishii@sra.co.jp
patch is applied:
Rewrite rules on relation level work fine now.
Event qualifications on insert/update/delete rules work
fine now.
I added the new keyword OLD to reference the CURRENT
tuple. CURRENT will be removed in 6.5.
Update rules can reference NEW and OLD in the rule
qualification and the actions.
Insert/update/delete rules on views can be established to
let them behave like real tables.
For insert/update/delete rules multiple actions are
supported now. The actions can also be surrounded by
parantheses to make psql happy. Multiple actions are
required if update to a view requires updates to multiple
tables.
Regular users are permitted to create/drop rules on
tables they have RULE permissions for
(DefineQueryRewrite() is now able to get around the
access restrictions on pg_rewrite). This enables view
creation for regular users too. This required an extra
boolean parameter to pg_parse_and_plan() that tells to
set skipAcl on all rangetable entries of the resulting
queries. There is a new function
pg_exec_query_acl_override() that could be used by
backend utilities to use this facility.
All rule actions (not only views) inherit the permissions
of the event relations owner. Sample: User A creates
tables T1 and T2, creates rules that log
INSERT/UPDATE/DELETE on T1 in T2 (like in the regression
tests for rules I created) and grants ALL but RULE on T1
to user B. User B can now fully access T1 and the
logging happens in T2. But user B cannot access T2 at
all, only the rule actions can. And due to missing RULE
permissions on T1, user B cannot disable logging.
Rules on the attribute level are disabled (they don't
work properly and since regular users are now permitted
to create rules I decided to disable them).
Rules on select must have exactly one action that is a
select (so select rules must be a view definition).
UPDATE NEW/OLD rules are disabled (still broken, but
triggers can do it).
There are two new system views (pg_rule and pg_view) that
show the definition of the rules or views so the db admin
can see what the users do. They use two new functions
pg_get_ruledef() and pg_get_viewdef() that are builtins.
The functions pg_get_ruledef() and pg_get_viewdef() could
be used to implement rule and view support in pg_dump.
PostgreSQL is now the only database system I know, that
has rewrite rules on the query level. All others (where I
found a rule statement at all) use stored database
procedures or the like (triggers as we call them) for
active rules (as some call them).
Future of the rule system:
The now disabled parts of the rule system (attribute
level, multiple actions on select and update new stuff)
require a complete new rewrite handler from scratch. The
old one is too badly wired up.
After 6.4 I'll start to work on a new rewrite handler,
that fully supports the attribute level rules, multiple
actions on select and update new. This will be available
for 6.5 so we get full rewrite rule capabilities.
Jan
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
1. Removes the unnecessary "#define AbcRegProcedure 123"'s from
pg_proc.h.
2. Changes those #defines to use the names already defined in
fmgr.h.
3. Forces the make of fmgr.h in backend/Makefile instead of having
it
made as a dependency in access/common/Makefile *hack*hack*hack*
4. Rearranged the #includes to a less helter-skelter arrangement,
also
changing <file.h> to "file.h" to signify a non-system header.
5. Removed "pg_proc.h" from files where its only purpose was for
the
#defines removed in item #1.
6. Added "fmgr.h" to each file changed for completeness sake.
Turns out that #6 was not necessary for some files because fmgr.h
was being included in a roundabout way SIX levels deep by the first
include.
"access/genam.h"
->"access/relscan.h"
->"utils/rel.h"
->"access/strat.h"
->"access/skey.h"
->"fmgr.h"
So adding fmgr.h really didn't add anything to the compile, hopefully
just made it clearer to the programmer.
S Darren.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
After applying the following patch there remain two
probable buffer overruns detected by Electric Fence during
the regression test.
I'll try find out what causes the remain two ones.
This patch also corrects a typo in smgr.c.
was detected by Electric Fence and triggered by statements like:
SELECT * into table t from pg_database;
The system would crash on a memmove call in DataFile() with arguments
like this:
memmove(0x0, 0x0, 0);
Maurice Gittens
seems that my last post didn't make it through. That's good
since the diff itself didn't covered the renaming of
pg_user.h to pg_shadow.h and it's new content.
Here it's again. The complete regression test passwd with
only some float diffs. createuser and destroyuser work.
pg_shadow cannot be read by ordinary user.
So if the relname is given to acldefault() in
utils/adt/acl.c, it can do a IsSystemRelationName() on it and
return ACL_RD instead of ACL_WORLD_DEFAULT.
varchar length.
Cleans up code so attlen is always length.
Removed varchar() hack added earlier.
Will fix bug in selecting varchar() fields, and varchar() can be
variable length.
Patch by: wieck@sapserv.debis.de (Jan Wieck)
One of the design rules of PostgreSQL is extensibility. And
to follow this rule means (at least for me) that there should
not only be a builtin PL. Instead I would prefer a defined
interface for PL implemetations.
==========================================
What follows is a set of diffs that cleans up the usage of BLCKSZ.
As a side effect, the person compiling the code can change the
value of BLCKSZ _at_their_own_risk_. By that, I mean that I've
tried it here at 4096 and 16384 with no ill-effects. A value
of 4096 _shouldn't_ affect much as far as the kernel/file system
goes, but making it bigger than 8192 can have severe consequences
if you don't know what you're doing. 16394 worked for me, _BUT_
when I went to 32768 and did an initdb, the SCSI driver broke and
the partition that I was running under went to hell in a hand
basket. Had to reboot and do a good bit of fsck'ing to fix things up.
The patch can be safely applied though. Just leave BLCKSZ = 8192
and everything is as before. It basically only cleans up all of the
references to BLCKSZ in the code.
If this patch is applied, a comment in the config.h file though above
the BLCKSZ define with warning about monkeying around with it would
be a good idea.
Darren darrenk@insightdist.com
(Also cleans up some of the #includes in files referencing BLCKSZ.)
==========================================
tree "non-PORTNAME" dependent. Technically, anything that is PORTNAME
dependent should be able to be derived at compile time, through configure
or through gcc
as ints and longs. Touches on quite a few function args as
well. Most other files look ok as far as Oids go...still checking
though...
Since Oids are type'd as unsigned ints, they should prolly be used
with the %ud format string in elog and sprintf messages. Not sure
what kind of strangeness that could produce.
Darren King
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
way one creates a database system. Parts that were in "make install"
are not either in "make all" or initdb. Nothing goes in the PGDATA
directory besides user data. Creating multiple database systems is
easier.
In addition to applying the patch, it is necessary to move the file
libpq/pg_hba to backend/libpq/pg_hba.sample.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
In a catalog class that has a "name" type attribute, UPDATEing of an
instance of that class may destroy all of the attributes of that
instance that are stored as or after the "name" attribute.
This is caused by the alignment value of the "name" type being set to
"double" in Class pg_type, but "integer" in Class pg_attribute.
Postgres constructs a tuple using double alignment, but interprets it
using integer alignment.
The fix is to change the alignment to integer in pg_type.
Note that this corrects the problem for new Postgres systems. Existing
databases already contain the error and it can't easily be repaired because
this very bug prevents updating the class that contains it.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
This presumably corrects a problem of initdb failing on systems that have
an awk that is sensitive to this.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
When you try to do any UPDATE of the catalog class pg_class, such as
to change ownership of a class, the backend crashes.
This is really two serial bugs: 1) there is a hardcoded copy of the
schema of pg_class in the postgres program, and it doesn't match the
actual class that initdb creates in the database; 2) Parts of postgres
determine whether to pass an attribute value by value or by reference
based on the attbyval attribute of the attribute in class
pg_attribute. Other parts of postgres have it hardcoded. For the
relacl[] attribute in class pg_class, attbyval does not match the
hardcoded expectation.
The fix is to correct the hardcoded schema for pg_attribute and to
change the fetchatt macro so it ignores attbyval for all variable
length attributes. The fix also adds a bunch of logic documentation and
extends genbki.sh so it allows source files to contain such documentation.
--
Bryan Henderson Phone 408-227-6803
San Jose, California
---
below my signature, there are a coupls of diffs and files in a shell
archive, which were needed to build postgres95 1.02 on Siemens Nixdorfs
MIPS based SINIX systems. Except for the compiler switches "-W0" and
"-LD-Blargedynsym" these diffs should also apply for other SVR4 based
systems. The changes in "Makefile.global" and "genbki.sh" can probably
be ignored (I needed gawk, to make the script run).
There is one bugfix thou. In "src/backend/parser/sysfunc.c" the
function in this file didn't honor the EUROPEAN_DATES ifdef.
---
Submitted by: Frank Ridderbusch <ridderbusch.pad@sni.de>
Here's a couple more small fixes that I've made to make my runtime
checker happy with the code. More along the lines of those that
I sent in the past, ie, a pointer to an array != the name of
an array. The last patch is that I mailed about yesterday -- I got
two replies of "do it", so it's done. As far as I can tell, however,
the function in question is never called by pg95, so either way
it can't hurt...
From: "Kurt J. Lidl" <lidl@va.pubnix.com>
Someone asked me if the bpchar type could be extended to do
case-insensitive regular expression searches.
Submitted by: "Alistair G. Crooks" <azcb0@juts.ccc.amdahl.com>
It is not possible to define attributes as arrays of date or time, the
type _time and _date are not defined.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
The type _char16 (array of char16) is incorrectly defined as array of name
and values longer than 16 chars are stored as names and not truncated to 16
bytes as they should be.
Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>