Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux. open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.
Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option. Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.
In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.
Back-patch to all supported branches, since any of them might get used
on modern Linux versions.
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Formerly, the default value of wal_sync_method was determined inside xlog.c,
but now it is determined inside guc.c. guc.c was reading xlogdefs.h
without having read <fcntl.h>, leading to wrong determination of
DEFAULT_SYNC_METHOD. Obviously xlogdefs.h needs to include <fcntl.h>
for itself to ensure stable results.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.