to behave according to SQL92 (or according to my current understanding
of same, anyway). Per pghackers discussion way back in March 2002:
thread 'Do FROM items of different schemas conflict?'
correctly, truncate to NAMEDATALEN where needed, allow whitespace
around dots in qualified identifiers. Get rid of T_RECFIELD and
T_TGARGV token categories, which weren't accomplishing anything
except to create room for sins of omission in the grammar, ie,
places that should have allowed them and didn't. Fix a few other
bugs en passant.
offset past the last-used-item-plus-one, since that would result in
leaving uninitialized holes in the item pointer array. AFAICT the only
place that was depending on this was btree index build, which was being
cavalier about when to fill in the P_HIKEY pointer; easily fixed.
Also a small performance improvement: shuffle itemid's by means of
memmove, not a one-at-a-time loop.
>> alias in this case. What do you think?
>
> I guess that would make sense. I'll make a separate patch just for
that
> change if that's OK.
>
Simple change -- patch attached.
test=# select * from myfoo1() as z;
z
----
1
2
3
(3 rows)
Joe Conway
don't return type RECORD. It also catches a core dump condition when a
function returning RECORD had an alias list instead of a coldeflist.
Now both conditions throw an ERROR.
Joe Conway
executed in an implicitely aborted transaction (e.g. after an occur
occurs), we return an error (and not just a warning). For example:
nconway=# begin;
BEGIN
nconway=# insert; -- syntax error
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
ERROR: current transaction is aborted, queries ignored until end of
transaction block
The old behavior was:
nconway=# begin;
BEGIN
nconway=# insert;
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
WARNING: current transaction is aborted, queries ignored until end
of transaction block
*ABORT STATE*
Which can be confusing: if the client isn't paying careful attention,
they will conclude that the query has executed (because no error is
returned).
Neil Conway
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
hardwired lists of index names for each catalog, use the relcache's
mechanism for caching lists of OIDs of indexes of any table. This
reduces the common case of updating system catalog indexes to a single
line, makes it much easier to add a new system index (in fact, you
can now do so on-the-fly if you want to), and as a nice side benefit
improves performance a little. Per recent pghackers discussion.
of functions returning domain types, update documentation for typtype,
move get_typtype to lsyscache.c (actually, resurrect the old version),
add defense against creating pseudo-typed table columns, fix some
bogus list-parsing in grammar. Issues remain with respect to alias
handling and type checking; Joe is on those.
types for Table Functions, as previously proposed on HACKERS. Here is a
brief explanation:
1. Creates a new pg_type typtype: 'p' for pseudo type (currently either
'b' for base or 'c' for catalog, i.e. a class).
2. Creates new builtin type of typtype='p' named RECORD. This is the
first of potentially several pseudo types.
3. Modify FROM clause grammer to accept:
SELECT * FROM my_func() AS m(colname1 type1, colname2 type1, ...)
where m is the table alias, colname1, etc are the column names, and
type1, etc are the column types.
4. When typtype == 'p' and the function return type is RECORD, a list
of column defs is required, and when typtype != 'p', it is
disallowed.
5. A check was added to ensure that the tupdesc provide via the parser
and the actual return tupdesc match in number and type of
attributes.
When creating a function you can do:
CREATE FUNCTION foo(text) RETURNS setof RECORD ...
When using it you can do:
SELECT * from foo(sqlstmt) AS (f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) AS f(f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) f(f1 int, f2 text, f3 timestamp)
Included in the patches are adjustments to the regression test sql and
expected files, and documentation.
p.s.
This potentially solves (or at least improves) the issue of builtin
Table Functions. They can be bootstrapped as returning RECORD, and
we can wrap system views around them with properly specified column
defs. For example:
CREATE VIEW pg_settings AS
SELECT s.name, s.setting
FROM show_all_settings()AS s(name text, setting text);
Then we can also add the UPDATE RULE that I previously posted to
pg_settings, and have pg_settings act like a virtual table, allowing
settings to be queried and set.
Joe Conway
Can now do queries of the form: SELECT value IS OF (integer, float8);
Define macros for handling typmod manipulation for date/time types.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
Allow bit string constants without fully-specified length declaration.
Try implementing CREATE TABLE/OF as a mapping to inheritance.
May be appropriate, or may be replace later with something more exactly
like one might expect from databases without the feature.
strings. Should go back in and look at doing this a bit more elegantly
and (hopefully) cheaper. Probably not too bad anyway, but it seems a
shame to scan the strings twice: once for length for this buffer overrun
protection, and once to parse the line.
Remove use of pow() in date/time handling; was already gone from everything
*but* the time data types.
Define macros for handling typmod manipulation for date/time types.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
May not be the long-term solution (some continuing discussion with
Peter E.) but better than the current mapping of a conversion to integer
which I'd put in years ago before we had any bit string types at all.
This is already supported in the bit string implementation elsewhere.
Please use this patch instead of my previously submitted one.
It is just remerged against HEAD for new alter_table.out stuff.
Another reason this patch is useful for _interactive_ users: imagine a
view based on a many way join. Imagine creating a complicated insert
rule that inserts into all the joined tables and when you insert you get
a check failure, but you need to know which actual table the constraint
was on that failed!
Christopher Kings-Lynne
ERROR: ExecInsert: rejected due to CHECK constraint insert_con
To be like this:
ERROR: ExecInsert: rejected due to CHECK constraint "insert_con" on
"insert_tbl"
Updated regression tests to match.
I got sick of seeing 'rejected due to CHECK constraint "$1" in my log and
not being able to find the bug in our website code...
Christopher Kings-Lynne
functionality of the command is basically identical to that of
BEGIN; it just accepts a few extra options (only one of which
PostgreSQL currently implements), and is standards-compliant.
The patch includes a simple regression test and documentation.
[ Regression tests removed, per Peter.]
Neil Conway
there was a race condition between the "alter_table" and "rules"
regression tests. Depending on scheduling, sometimes an ALTER
TABLE command would operate on a relation created by the "rules"
tests, leading to unexpected results.
Neil Conway
whitespaces in identifers of any kind(table names,attribute
names,variables ...) in Pl/pgSQL procedural language.Explicit definition
of bug can be found in Re: [HACKERS] Bug of PL/pgSQL parser
TODO item completed:
o -Fix PL/PgSQL to handle quoted mixed-case identifiers
eutm
in the relcache. It's rather silly that we have reference count leak
checks in bufmgr and in catcache, but not in relcache which will normally
have many fewer entries. Chris K-L would have caught at least one bug
in his recent DROP patch if he'd had this.
relation being modified. In most paths of control we'd already have
such a lock, but if we were dropping the default due to a cascaded
delete of some function it depended on, maybe not.
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
this only works against 7.3 or later databases; the pushups required
to do it without regprocedure/regtype/etc seem more trouble than they're
worth, considering that existing users aren't expecting pg_dump support
for this.
'tioga recipes', whatever those are -- Peter E. killed most
of it a couple days ago, but this patch removes the rest. Most
of it was #ifdef'ed out anyway.
Neil Conway
The attached patch completes the following TODO item:
* Generate failure on short COPY lines rather than pad NULLs
I also restructed a lot of the existing COPY code, did some code
review on the column list patch sent in by Brent Verner a little
while ago, and added some regression tests. I also added an
explicit check (and resultant error) for extra data before
the end-of-line.
Neil Conway
a few other things:
* Made all references to the pg_* tables absolute, by specifying
the pg_catalog schema.
* Added SCHEMA as a create/delete completion option.
* Added SCHEMA completion as: SELECT nspname FROM
pg_catalog.pg_namespace
WHERE substr(nspname,1,%d)='%s'
* Added completion of "INSERT INTO <table> (" with attribute names.
* Added completion of "INSERT INTO <table> (attribs)" with
VALUES or SELECT
* Added limited locking completion: only for one table:
"LOCK" and "LOCK TABLE" now both get a completion list of tables
Complete with "IN" for LOCK [TABLE] <table>
Complete LOCK [TABLE] <table> IN with a lock mode
* Added a very simple WHERE finisher that uses the previous word
as a table lookup for attributes.
* Added quote support when parsing "previous words". In other words,
hitting tab after INSERT INTO "foo bar baby"
now does the right thing and recognizes "foo bar baby" as one word.
Letting tab-complete quote things that should be quoted seems to be
temporarily ifdef'ed out due to readline compatibility problems.
Can anyone elaborate on this?
Greg Sabino Mullane
deleted that had another row inserted/updated to its old
value during the same statement or other statements before the
integrity check for noaction would incorrectly error. This
could happen in deferred constraints or due to triggers or
functions. It's effectively a reworking of the previous patch that
did a not exists to instead do a separate check.
Stephan Szabo
changes mentioned above, and also adds a new function to the tablefunc
API. The tablefunc API change adds the following function:
* Oid foidGetTypeId(Oid foid) - Get a function's typeid given the
* function Oid. Use this together with TypeGetTupleDesc() to get a
* TupleDesc which is derived from the function's declared return type.
In the next post I'll send the contrib/tablefunc patch, which
illustrates the usage of this new function. Also attached is a doc patch
for this change. The doc patch also adds a function that I failed to
document previously.
Joe Conway
copied more places than I first thought it would. This fixes a bug:
a couple of these places were neglecting to enforce USAGE access on
explicitly-referenced schemas.
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
of duplicated code between the jdbc1 and jdbc2. This checkin restructures
the code so that the duplication is removed so that the jdbc3 support
can be added without adding yet another copy of everything. Also many
classes were renamed to avoid confusion with multiple different objects
having the same name. The timestamp tests were also updated to add support
for testing timestamp without time zone in addition to timestamp with time zone
Modified Files:
jdbc/Makefile jdbc/build.xml jdbc/example/ImageViewer.java
jdbc/example/basic.java jdbc/example/blobtest.java
jdbc/example/threadsafe.java
jdbc/org/postgresql/Driver.java.in
jdbc/org/postgresql/Field.java
jdbc/org/postgresql/core/QueryExecutor.java
jdbc/org/postgresql/fastpath/Fastpath.java
jdbc/org/postgresql/jdbc1/CallableStatement.java
jdbc/org/postgresql/jdbc1/DatabaseMetaData.java
jdbc/org/postgresql/jdbc1/PreparedStatement.java
jdbc/org/postgresql/jdbc2/Array.java
jdbc/org/postgresql/jdbc2/CallableStatement.java
jdbc/org/postgresql/jdbc2/DatabaseMetaData.java
jdbc/org/postgresql/jdbc2/PreparedStatement.java
jdbc/org/postgresql/jdbc2/UpdateableResultSet.java
jdbc/org/postgresql/largeobject/LargeObjectManager.java
jdbc/org/postgresql/largeobject/PGblob.java
jdbc/org/postgresql/largeobject/PGclob.java
jdbc/org/postgresql/test/jdbc2/BlobTest.java
jdbc/org/postgresql/test/jdbc2/ConnectionTest.java
jdbc/org/postgresql/test/jdbc2/DatabaseMetaDataTest.java
jdbc/org/postgresql/test/jdbc2/TimestampTest.java
jdbc/org/postgresql/test/jdbc2/UpdateableResultTest.java
jdbc/org/postgresql/util/Serialize.java
Added Files:
jdbc/org/postgresql/PGConnection.java
jdbc/org/postgresql/PGStatement.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1Connection.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1ResultSet.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1Statement.java
jdbc/org/postgresql/jdbc1/Jdbc1Connection.java
jdbc/org/postgresql/jdbc1/Jdbc1ResultSet.java
jdbc/org/postgresql/jdbc1/Jdbc1Statement.java
jdbc/org/postgresql/jdbc2/AbstractJdbc2Connection.java
jdbc/org/postgresql/jdbc2/AbstractJdbc2ResultSet.java
jdbc/org/postgresql/jdbc2/AbstractJdbc2Statement.java
jdbc/org/postgresql/jdbc2/Jdbc2Connection.java
jdbc/org/postgresql/jdbc2/Jdbc2ResultSet.java
jdbc/org/postgresql/jdbc2/Jdbc2Statement.java
Removed Files:
jdbc/org/postgresql/Connection.java
jdbc/org/postgresql/ResultSet.java
jdbc/org/postgresql/Statement.java
jdbc/org/postgresql/jdbc1/Connection.java
jdbc/org/postgresql/jdbc1/ResultSet.java
jdbc/org/postgresql/jdbc1/Statement.java
jdbc/org/postgresql/jdbc2/Connection.java
jdbc/org/postgresql/jdbc2/ResultSet.java
jdbc/org/postgresql/jdbc2/Statement.java
changes, but I kept finding myself wishing I could see what schema a
table or view exists in when I use \dt, \dv, etc. So, here is a patch
which does just that.
It sorts on "Schema" first, and "Name" second.
It also changes the test for system objects to key off the namespace
name starting with 'pg_' instead of the object name.
Sample output:
test=# create schema testschema;
CREATE SCHEMA
test=# create view testschema.ts_view as select 1;
CREATE VIEW
test=# \dv
List of relations
Name | Schema | Type | Owner
--------------------+------------+------+----------
__testpassbyval | public | view | postgres
fooview | public | view | postgres
master_pg_proc | public | view | postgres
rmt_pg_proc | public | view | postgres
vw_dblink_get_pkey | public | view | postgres
vw_dblink_replace | public | view | postgres
ts_view | testschema | view | postgres
(7 rows)
Joe Conway
> submitted on July 9:
>
> http://archives.postgresql.org/pgsql-patches/2002-07/msg00056.php
>
> Please disregard that one *if* this one is applied. If this one is
> rejected please go ahead with the July 9th patch.
The July 9th Table Function API patch mentioned above is now in CVS, so
here is an updated version of the guc patch which should apply cleanly
against CVS tip.
Joe Conway
.
So i took the opportunity to fix some stuff:
1. Made the thing compile (typos & needed definitions) with the new pqsecure_* s
tuff, and added fe-secure.c to the win32.mak makefile.
2. Fixed some MULTIBYTE compile errors (when building without MB support).
3. Made it do that you can build with debug info: "nmake -f win32.mak DEBUG=1".
4. Misc small compiler speedup changes.
The resulting .dll has been tested in production, and everything seems ok.
I CC:ed -hackers because i'm not sure about two things:
1. In libpq-int.h I typedef ssize_t as an int because Visual C (v6.0)
doesn't de fine ssize_t. Is that ok, or is there any standard about what
type should be use d for ssize_t?
2. To keep the .dll api consistent regarding MULTIBYTE I just return -1
in fe-connect.c:PQsetClientEncoding() instead of taking away the whole
function. I wonder if i should do any compares with the
conn->client_encoding and return 0 if not hing would have changed (if so
how do i check that?).
Regards
Magnus Naeslund
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
PX recombination operator, changes some elog() messages from LOG
to DEBUG1, puts some debugging functions inside the appropriate
#ifdef (not enabled by default), and makes a few other minor
cleanups.
BTW, the elog() change is motivated by at least one user who
has sent a concerned email to -general asking exactly what the
"ERX recombination operator" is, and what it is doing to their
DBMS.
Neil Conway
tuple header. The fix is based on the thought that HEAP_MOVED_IN is
not needed any more as soon as HEAP_XMIN_COMMITTED has been set. So
in tqual.c and vacuum.c the HEAP_MOVED bits are cleared when
HEAP_XMIN_COMMITTED is set.
Vacuum robustness is enhanced by rearranging ifs, so that we have a
chance to elog(ERROR, ...) before an assertion fails.
A new regression test is included.
Manfred Koizar
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
COPY x (a,d,c,b) from stdin;
COPY x (a,c) to stdout;
as well as the corresponding changes to pg_dump to use the new
functionality. This functionality is not available when using
the BINARY option. If a column is not specified in the COPY FROM
statement, its default values will be used.
In addition to this functionality, I tweaked a couple of the
error messages emitted by the new COPY <options> checks.
Brent Verner
Implements between (symmetric / asymmetric) as a node.
Executes the left or right expression once, makes a Const out of the
resulting Datum and executes the >=, <= portions out of the Const sets.
Of course, the parser does a fair amount of preparatory work for this to
happen.
Rod Taylor
Conway (BuildTupleFromCStrings sets NULL for pass-by-value types when
intended value is 0). It also implements some other improvements
suggested by Neil.
Joe Conway
conversion procs and conversions are added in initdb. Currently
supported conversions are:
UTF-8(UNICODE) <--> SQL_ASCII, ISO-8859-1 to 16, EUC_JP, EUC_KR,
EUC_CN, EUC_TW, SJIS, BIG5, GBK, GB18030, UHC,
JOHAB, TCVN
EUC_JP <--> SJIS
EUC_TW <--> BIG5
MULE_INTERNAL <--> EUC_JP, SJIS, EUC_TW, BIG5
Note that initial contents of pg_conversion system catalog are created
in the initdb process. So doing initdb required is ideal, it's
possible to add them to your databases by hand, however. To accomplish
this:
psql -f your_postgresql_install_path/share/conversion_create.sql your_database
So I did not bump up the version in cataversion.h.
TODO:
Add more conversion procs
Add [CASCADE|RESTRICT] to DROP CONVERSION
Add tuples to pg_depend
Add regression tests
Write docs
Add SQL99 CONVERT command?
--
Tatsuo Ishii