allowed different processes to have different addresses for the shmem segment
in quite a long time, but there were still a few places left that used the
old coding convention. Clean them up to reduce confusion and improve the
compiler's ability to detect pointer type mismatches.
Kris Jurka
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
This patch eliminates the marking of subtransactions as SUBCOMMITTED in pg_clog
during their commit; instead they remain in-progress until main transaction
commit. At main transaction commit, the commit protocol is atomic-by-page
instead of one transaction at a time. To avoid a race condition with some
subtransactions appearing committed before others in the case where they span
more than one pg_clog page, we conserve the logic that marks them subcommitted
before marking the parent committed.
Simon Riggs with minor help from me
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
for pg_stop_backup. First, it is possible that the history file name is not
alphabetically later than the last WAL file name, so we should explicitly
check that both have been archived. Second, the previous coding would wait
forever if a checkpoint had managed to remove the WAL file before we look for
it.
Simon Riggs, plus some code cleanup by me.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
to go beoynd 10MB, as demonstrated by Gavin Sharry's example of dropping a
schema with ~25000 objects. The really bogus thing about the limit was that
it was enforced when a state file file was read in, not when it was written,
so you would end up with a prepared transaction that you can't commit or
abort, and the only recourse was to shut down the server and remove the file
by hand.
Raise the limit to MaxAllocSize, and enforce it also when a state file is
written. We could've removed the limit altogether, but reading in a file
larger than MaxAllocSize would fail anyway because we read it into a
palloc'd buffer.
Backpatch down to 8.1, where 2PC and this issue was introduced.
Formerly, the default value of wal_sync_method was determined inside xlog.c,
but now it is determined inside guc.c. guc.c was reading xlogdefs.h
without having read <fcntl.h>, leading to wrong determination of
DEFAULT_SYNC_METHOD. Obviously xlogdefs.h needs to include <fcntl.h>
for itself to ensure stable results.
modes, replacing it with a call to a function that derives it from the
sync_method variable, now that it has distinct values for these two cases.
This means that assign_xlog_sync_method() no longer changes any settings,
thus fixing the bug introduced in the change to use a guc enum for
wal_sync_method.
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
parameter. This fixes bug 4137 reported by Wojciech Strzalka, where a WAL
file is deleted too early when starting the recovery of a warm standby server.
Also add a sanity check in pg_standby so that it will refuse to delete anything
earlier than the file being restored, and improve the debug message in case
nothing is deleted.
Simon Riggs. Backpatch to 8.3, which is where %r was introduced.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
corrupted. (Neither is very important if SIGTERM is used to shut down the
whole database cluster together, but there's a problem if someone tries to
SIGTERM individual backends.) To do this, introduce new infrastructure
macros PG_ENSURE_ERROR_CLEANUP/PG_END_ENSURE_ERROR_CLEANUP that take care
of transiently pushing an on_shmem_exit cleanup hook. Also use this method
for createdb cleanup --- that wasn't a shared-memory-corruption problem,
but SIGTERM abort of createdb could leave orphaned files lying around.
Backpatch as far as 8.2. The shmem corruption cases don't exist in 8.1,
and the createdb usage doesn't seem important enough to risk backpatching
further.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
linear search when checking child-transaction XIDs. This makes for an
important speedup in transactions that have large numbers of children,
as in a recent example from Craig Ringer. We can also get rid of an
ugly kluge that represented lists of TransactionIds as lists of OIDs.
Heikki Linnakangas
before it goes groveling through the ProcArray. In situations where the same
recently-committed transaction ID is checked repeatedly by tqual.c, this saves
a lot of shared-memory searches. And it's cheap enough that it shouldn't
hurt noticeably when it doesn't help.
Concept and patch by Simon, some minor tweaking and comment-cleanup by Tom.
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
checkpoint. This guards against an unlikely data-loss scenario in which
we re-use the relfilenode, then crash, then replay the deletion and
recreation of the file. Even then we'd be OK if all insertions into the
new relation had been WAL-logged ... but that's not guaranteed given all
the no-WAL-logging optimizations that have recently been added.
Patch by Heikki Linnakangas, per a discussion last month.
having several of them. Add two more flags: whether the process is
executing an ANALYZE, and whether a vacuum is for Xid wraparound (which
is obviously only set by autovacuum).
Sneakily move the worker's recently-acquired PostAuthDelay to a more useful
place.
has been consumed, recheck against the latest value of RedoRecPtr before
really sending the signal. This avoids useless checkpoint activity if
XLogWrite is executed when we have a very stale local copy of RedoRecPtr.
The potential for useless checkpoint is very much worse in 8.3 because of
the walwriter process (which never does XLogInsert), so while this behavior
was intentional, it needs to be changed. Per report from Itagaki Takahiro.
while the restore_command does its thing, then 'recovering XXX' while
processing the segment file. These operations are heavyweight enough
that an extra PS display set shouldn't bother anyone.
recovery stop time was used. This avoids a corner-case risk of trying to
overwrite an existing archived copy of the last WAL segment, and seems
simpler and cleaner all around than the original definition. Per example
from Jon Colverson and subsequent analysis by Simon.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
First, we cannot assume that XLogAsyncCommitFlush guarantees hint bits will be
settable, because clog.c's inexact LSN bookkeeping results in windows where a
previously flushed transaction is considered unhintable because it shares an
LSN slot with a later unflushed transaction. But repair_frag requires
XMIN_COMMITTED to be correct so that it can distinguish tuples moved by the
current vacuum. Since not being able to set the bit is an uncommon corner
case, the most practical way of dealing with it seems to be to abandon
shrinking (ie, don't invoke repair_frag) when we find a non-dead tuple whose
XMIN_COMMITTED bit couldn't be set.
Second, it is possible for the same reason that a RECENTLY_DEAD tuple does not
get its XMAX_COMMITTED bit set during scan_heap. But by the time repair_frag
examines the tuple it might be possible to set the bit. We therefore must
take buffer content lock when calling HeapTupleSatisfiesVacuum a second time,
else we can get an Assert failure in SetBufferCommitInfoNeedsSave. This
latter bug is latent in existing releases, but I think it cannot actually
occur without async commit, since the first HeapTupleSatisfiesVacuum call
should always have set the bit. So I'm not going to back-patch it.
In passing, reduce the existing "cannot shrink relation" messages from NOTICE
to LOG level. The new message must be no higher than LOG if we don't want
unpredictable regression test failures, and consistency seems like a good
idea. Also arrange that only one such message is reported per VACUUM FULL;
in typical scenarios you could get spammed with many such messages, which
seems a bit useless.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
which is the only state in which it's safe to initiate database queries.
It turns out that all but two of the callers thought that's what it meant;
and the other two were using it as a proxy for "will GetTopTransactionId()
return a nonzero XID"? Since it was in fact an unreliable guide to that,
make those two just invoke GetTopTransactionId() always, then deal with a
zero result if they get one.
fail when used in a deferred trigger. Bug goes back to 8.0; no doubt the
reason it hadn't been noticed is that we've been discouraging use of
user-defined constraint triggers. Per report from Frank van Vugt.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
from the WAL data, don't bother to physically read it; just have bufmgr.c
return a zeroed-out buffer instead. This speeds recovery significantly,
and also avoids unnecessary failures when a page-to-be-overwritten has corrupt
page headers on disk. This replaces a former kluge that accomplished the
latter by pretending zero_damaged_pages was always ON during WAL recovery;
which was OK when the kluge was put in, but is unsafe when restoring a WAL
log that was written with full_page_writes off.
Heikki Linnakangas
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
are in their commit critical sections via flags in the ProcArray. Checkpoint
can watch the ProcArray to determine when it's safe to proceed. This is
a considerably better solution to the original problem of race conditions
between checkpoint and transaction commit: it speeds up commit, since there's
one less lock to fool with, and it prevents the problem of checkpoint being
delayed indefinitely when there's a constant flow of commits. Heikki, with
some kibitzing from Tom.
Add the latter to the values checked in pg_control, since it can't be changed
without invalidating toast table content. This commit in itself shouldn't
change any behavior, but it lays some necessary groundwork for experimentation
with these toast-control numbers.
Note: while TOAST_TUPLE_THRESHOLD can now be changed without initdb, some
thought still needs to be given to needs_toast_table() in toasting.c before
unleashing random changes.
of a multi-statement simple-Query message. This bug goes all the way
back, but unfortunately is not nearly so easy to fix in existing releases;
it is only the recent ProcessUtility API change that makes it fixable in
HEAD. Per report from William Garrison.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
where possible, and fix some sites that apparently thought that fgets()
will overwrite the buffer by one byte.
Also add some strlcpy() to eliminate some weird memory handling.
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
"database system is ready to accept connections", which is issued by the
postmaster when it really is ready to accept connections. Per proposal from
Markus Schiltknecht and subsequent discussion.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
StartupXLOG and ShutdownXLOG no longer need to be critical sections, because
in all contexts where they are invoked, elog(ERROR) would be translated to
elog(FATAL) anyway. (One change in bgwriter.c is needed to make this true:
set ExitOnAnyError before trying to exit. This is a good fix anyway since
the existing code would have gone into an infinite loop on elog(ERROR) during
shutdown.) That avoids a misleading report of PANIC during semi-orderly
failures. Modify the postmaster to include the startup process in the set of
processes that get SIGTERM when a fast shutdown is requested, and also fix it
to not try to restart the bgwriter if the bgwriter fails while trying to write
the shutdown checkpoint. Net result is that "pg_ctl stop -m fast" does
something reasonable for a system in warm standby mode, and so should Unix
system shutdown (ie, universal SIGTERM). Per gripe from Stephen Harris and
some corner-case testing of my own.
AbortTransaction, which would lead to recursion and eventual PANIC exit
as illustrated in recent report from Jeff Davis. First, in xact.c create
a special dedicated memory context for AbortTransaction to run in. This
solves the problem as long as AbortTransaction doesn't need more than 32K
(or whatever other size we create the context with). But in corner cases
it might. Second, in trigger.c arrange to keep pending after-trigger event
records in separate contexts that can be freed near the beginning of
AbortTransaction, rather than having them persist until CleanupTransaction
as before. Third, in portalmem.c arrange to free executor state data
earlier as well. These two changes should result in backing off the
out-of-memory condition before AbortTransaction needs any significant
amount of memory, at least in typical cases such as memory overrun due
to too many trigger events or too big an executor hash table. And all
the same for subtransaction abort too, of course.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
cases where we already hold the desired lock "indirectly", either via
membership in a MultiXact or because the lock was originally taken by a
different subtransaction of the current transaction. These cases must be
accounted for to avoid needless deadlocks and/or inappropriate replacement of
an exclusive lock with a shared lock. Per report from Clarence Gardner and
subsequent investigation.
30 seconds instead of retrying forever. Also modify xlog.c so that if
it fails to rename an old xlog segment up to a future slot, it will
unlink the segment instead. Per discussion of bug #2712, in which it
became apparent that Windows can handle unlinking a file that's being
held open, but not renaming it.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
that conflict with the OID that we want to use for the new database.
This avoids the risk of trying to remove files that maybe we shouldn't
remove. Per gripe from Jon Lapham and subsequent discussion of 27-Sep.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
vacuums. This allows a OLTP-like system with big tables to continue
regular vacuuming on small-but-frequently-updated tables while the
big tables are being vacuumed.
Original patch from Hannu Krossing, rewritten by Tom Lane and updated
by me.
recovery. In the first place, it doesn't work because slru's
latest_page_number isn't set up yet (this is why we've been hearing reports
of strange "apparent wraparound" log messages during crash recovery, but
only from people who'd managed to advance their next-mxact counters some
considerable distance from 0). In the second place, it seems a bit unwise
to be throwing away data during crash recovery anwyway. This latter
consideration convinces me to just disable truncation during recovery,
rather than computing latest_page_number and pushing ahead.
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
this someday, but right now it seems that posix_fadvise is immature to
the point of being broken on many platforms ... and we don't have any
benchmark evidence proving it's worth spending time on.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
for it. Hopefully will fix core dump evidenced by some buildfarm members
since fadvise patch went in. The actual definition of the function is not
ABI-compatible with compiler's default assumption in the absence of any
declaration, so it's clearly unsafe to try to call it without seeing a
declaration.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
whenever we start to read within that file. The first page carries
extra identification information that really ought to be checked, but
as the code stood, this was only checked when we switched sequentially
into a new WAL file, or if by chance the starting checkpoint record was
within the first page. This patch ensures that we will detect bogus
'long header' information before we start replaying the WAL sequence.
to occur between pg_start_backup() and pg_stop_backup(), even if the GUC
setting full_page_writes is OFF. Per discussion, doing this in combination
with the already-existing checkpoint during pg_start_backup() should ensure
safety against partial page updates being included in the backup. We do
not have to force full page writes to occur during normal PITR operation,
as I had first feared.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
failures even when the hardware and OS did nothing wrong. Per recent analysis
of a problem report from Alex Bahdushka.
For the moment I've just diked out the test of the parameter, rather than
removing the GUC infrastructure and documentation, in case we conclude that
there's something salvageable there. There seems no chance of it being
resurrected in the 8.1 branch though.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
setup. This protects against undesired changes in locale behavior
if someone carelessly does setlocale(LC_ALL, "") (and we know who
you are, perl guys).
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
lock, not exclusive, if the desired page is already in memory. This can
be demonstrated to be a significant win on the pg_subtrans cache when there
is a large window of open transactions. It should be useful for pg_clog
as well. I didn't try to make GetMultiXactIdMembers() use the code, as
that would have taken some restructuring, and what with the local cache
for multixact contents it probably wouldn't really make a difference.
Per my recent proposal.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
very narrow window in which SimpleLruReadPage or SimpleLruWritePage could
think that I/O was needed when it wasn't (and indeed the buffer had already
been assigned to another page). This would result in an Assert failure if
Asserts were enabled, and probably in silent data corruption if not.
Reported independently by Jim Nasby and Robert Creager.
I intend a more extensive fix when 8.2 development starts, but this is a
reasonably low-impact patch for the existing branches.
multixact's starting offset before the offset has been stored into the
SLRU file. A simple fix would be to hold the MultiXactGenLock until the
offset has been stored, but that looks like a big concurrency hit. Instead
rely on knowledge that unset offsets will be zero, and loop when we see
a zero. This requires a little extra hacking to ensure that zero is never
a valid value for the offset. Problem reported by Matteo Beccati, fix
ideas from Martijn van Oosterhout, Alvaro Herrera, and Tom Lane.
This makes the error messages for PREPARE TRANSACTION, COMMIT PREPARED
etc. match the docs, which talk about "transaction identifier" not
"gid" or "global transaction identifier".
Steve Woodcock
was created on a machine with alignment rules and floating-point format
similar to the current machine. Per recent discussion, this seems like
a good idea with the increasing prevalence of 32/64 bit environments.
saves nearly 700kB in the default shared memory segment size, which seems
worthwhile, and it is a feature that many users won't use anyway. Per
Heikki's argument, there is no point in a compromise value --- those who
are using 2PC at all will probably want it at least equal to max_connections.
But we can't set it to zero by default without breaking the prepared_xacts
regression test.
after the fact. Fix bug with incorrect test for whether we are at end
of logfile segment. Arrange for writes triggered by XLogInsert's
is-cache-more-than-half-full test to synchronize with the cache boundaries,
so that in long transactions we tend to write alternating halves of the
cache rather than randomly chosen portions of it; this saves one more
write syscall per cache load.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
ResourceOwner mechanism already released all reference counts for the
cache entries; therefore, we do not need to scan the catcache or relcache
at transaction end, unless we want to do it as a debugging crosscheck.
Do the crosscheck only in Assert mode. This is the same logic we had
previously installed in AtEOXact_Buffers to avoid overhead with large
numbers of shared buffers. I thought it'd be a good idea to do it here
too, in view of Kari Lavikka's recent report showing a real-world case
where AtEOXact_CatCache is taking a significant fraction of runtime.
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
Also, write multiple WAL buffers out in one write() operation.
ITAGAKI Takahiro
---------------------------------------------------------------------------
> If we disable writeback-cache and use open_sync, the per-page writing
> behavior in WAL module will show up as bad result. O_DIRECT is similar
> to O_DSYNC (at least on linux), so that the benefit of it will disappear
> behind the slow disk revolution.
>
> In the current source, WAL is written as:
> for (i = 0; i < N; i++) { write(&buffers[i], BLCKSZ); }
> Is this intentional? Can we rewrite it as follows?
> write(&buffers[0], N * BLCKSZ);
>
> In order to achieve it, I wrote a 'gather-write' patch (xlog.gw.diff).
> Aside from this, I'll also send the fixed direct io patch (xlog.dio.diff).
> These two patches are independent, so they can be applied either or both.
>
>
> I tested them on my machine and the results as follows. It shows that
> direct-io and gather-write is the best choice when writeback-cache is off.
> Are these two patches worth trying if they are used together?
>
>
> | writeback | fsync= | fdata | open_ | fsync_ | open_
> patch | cache | false | sync | sync | direct | direct
> ------------+-----------+--------+-------+-------+--------+---------
> direct io | off | 124.2 | 105.7 | 48.3 | 48.3 | 48.2
> direct io | on | 129.1 | 112.3 | 114.1 | 142.9 | 144.5
> gather-write| off | 124.3 | 108.7 | 105.4 | (N/A) | (N/A)
> both | off | 131.5 | 115.5 | 114.4 | 145.4 | 145.2
>
> - 20runs * pgbench -s 100 -c 50 -t 200
> - with tuning (wal_buffers=64, commit_delay=500, checkpoint_segments=8)
> - using 2 ATA disks:
> - hda(reiserfs) includes system and wal.
> - hdc(jfs) includes database files. writeback-cache is always on.
>
> ---
> ITAGAKI Takahiro
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
given reasonably short lifespans for prepared transactions, this should
mean that only a small minority of state files ever need to be fsynced
at all. Per discussion with Heikki Linnakangas.
old suggestion by Oliver Jowett. Also, add a transaction column to the
pg_locks view to show the xid of each transaction holding or awaiting
locks; this allows prepared transactions to be properly associated with
the locks they own. There was already a column named 'transaction',
and I chose to rename it to 'transactionid' --- since this column is
new in the current devel cycle there should be no backwards compatibility
issue to worry about.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
critical and noncritical contexts (an example of noncritical being
post-checkpoint removal of dead xlog segments). In the critical cases
the CRIT_SECTION mechanism will cause ERROR to be promoted to PANIC
anyway, and in the noncritical cases we shouldn't let an error take
down the entire database. Arguably there should be *no* explicit
PANIC errors in this module, only more START/END_CRIT_SECTION calls,
but I didn't go that far. (Yet.)
when recycling a large number of xlog segments during checkpoint.
The former behavior searched from the same start point each time,
requiring O(checkpoint_segments^2) stat() calls to relocate all the
segments. Instead keep track of where we stopped last time through.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
deferred triggers: either one can create more work for the other,
so we have to loop till it's all gone. Per example from andrew@supernews.
Add a regression test to help spot trouble in this area in future.
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
the remainder of the current clog page during system startup. While
this was a good idea, it turns out the code fails if nextXid is
exactly at a page boundary, because we won't have created the "current"
clog page yet in that case. Since the page will be correctly zeroed
when we execute the first transaction on it, the solution is just to
do nothing when exactly at a page boundary. Per trouble report from
Dave Hartwig.