The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
This changes the routines in charge of recycling WAL segments past the
last redo LSN to not use anymore "RedoRecPtr" as a local variable, which
is also available in the context of the session as a static declaration,
replacing it with "lastredoptr". This confusion has been introduced by
d9fadbf, so backpatch down to v11 like the other commit.
Thanks to Tom Lane, Robert Haas, Alvaro Herrera, Mark Dilger and Kyotaro
Horiguchi for the input provided.
Author: Ranier Vilela
Discussion: https://postgr.es/m/MN2PR18MB2927F7B5F690065E1194B258E35D0@MN2PR18MB2927.namprd18.prod.outlook.com
Backpatch-through: 11
recoveryDelayUntilTime was introduced by commit 36da3cfb45 as a global
because its method of operation was devilishly intrincate. Commit
c945af80cf removed all that complexity and could have turned it into a
local variable, but didn't. Do so now.
Discussion: https://postgr.es/m/20191213200751.GA10731@alvherre.pgsql
Reviewed-by: Michaël Paquier, Daniel Gustafsson
Error messages referring to incorrect WAL segment names could have been
generated for a fsync() failure or when creating a new segment at the
end of recovery.
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
In v11 or before, those settings could not take effect in crash recovery
because they are specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
those settings to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
restore_command and recovery_end_command settings.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit
2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
Instead of WAL-logging every modification during the build separately,
first build the index without any WAL-logging, and make a separate pass
through the index at the end, to write all pages to the WAL. This
significantly reduces the amount of WAL generated, and is usually also
faster, despite the extra I/O needed for the extra scan through the index.
WAL generated this way is also faster to replay.
For GiST, the LSN-NSN interlock makes this a little tricky. All pages must
be marked with a valid (i.e. non-zero) LSN, so that the parent-child
LSN-NSN interlock works correctly. We now use magic value 1 for that during
index build. Change the fake LSN counter to begin from 1000, so that 1 is
safely smaller than any real or fake LSN. 2 would've been enough for our
purposes, but let's reserve a bigger range, in case we need more special
values in the future.
Author: Anastasia Lubennikova, Andrey V. Lepikhov
Reviewed-by: Heikki Linnakangas, Dmitry Dolgov
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Especially, warn about the hazards of mishandling the backup_label
file. Adjust a couple of server messages to be more clear about
the hazards associated with removing backup_label files, too.
David Steele and Robert Haas, reviewed by Laurenz Albe, Martín
Marqués, Peter Eisentraut, and Magnus Hagander.
Discussion: http://postgr.es/m/7d85c387-000e-16f0-e00b-50bf83c22127@pgmasters.net
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
ce6afc6 has begun the refactoring work by plugging pg_rewind into a
central routine to update the control file, and left around two extra
copies, with one in xlog.c for the backend and one in pg_resetwal.c. By
adding an extra option to the central routine in controldata_utils.c to
control if a flush of the control file needs to be done, it is proving
to be straight-forward to make xlog.c and pg_resetwal.c use the central
code path at the condition of moving the wait event tracking there.
Hence, this allows to have only one central code path to update the
control file, shaving the code from the duplicates.
This refactoring actually fixes a problem in pg_resetwal. Previously,
the control file was first removed before being recreated. So if a
crash happened between the moment the file was removed and the moment
the file was created, then it would have been possible to not have a
control file anymore in the database folder.
Author: Fabien Coelho
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903170935210.2506@lancre
93473c6 has removed openLogOff, changing on the way the error message
which is used to report partial writes to WAL segments. The
newly-introduced error message used the offset up to which the write has
happened, keeping always the same total length to write. This changes
the error message so as the number of bytes left to write are reported.
Reported-by: Michael Paquier
Author: Robert Haas
Discussion: https://postgr.es/m/20190306235251.GA17293@paquier.xyz
This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
A timeout of 5s is used when waiting for WAL to become available at
recovery so as the startup process is able to react promptly if a
trigger file shows up. However this missed the fact that the startup
process also relies on the timeout to check periodically the status of
any active WAL receiver.
Discussion: https://postgr.es/m/20190131070956.GE13429@paquier.xyz
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
The function name pg_stop_backup() has been included for ages in some
log messages when stopping the backup, which is confusing for base
backups taken with the replication protocol because this function is
never called. Some other comments and messages in this area are
improved while on it.
The new wording is based on input and suggestions from several people,
all listed below.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20181221040510.GA12599@paquier.xyz
While it seems OK to not be concerned about fsync() failure for a
pre-existing signal file, it's not OK to not even check for open()
failure. This at least causes complaints from static analyzers,
and I think on some platforms passing -1 to fsync() or close() might
trigger assertion-type failures. Also add (void) casts to make clear
that we're ignoring fsync's result intentionally.
Oversights in commit 2dedf4d9a, noted by Coverity.
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
When reading a WAL record, its contents are copied into an intermediate
buffer. However, doing so is not necessary if the record fits fully
into the current page, saving one memcpy for each such record. The
allocation handling of the intermediate buffer is also now done only
when a record crosses a page boundary, shaving some extra cycles when
reading a WAL record.
Author: Andrey Lepikhov
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas
Discussion: https://postgr.es/m/c2ea54dd-a1d3-80eb-ddbf-7e6f258e615e@postgrespro.ru
This function is able to promote a standby with this new SQL-callable
function. Execution access can be granted to non-superusers so that
failover tools can observe the principle of least privilege.
Catalog version is bumped.
Author: Laurenz Albe
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6e7c79b3ec916cf49742fb8849ed17cd87aed620.camel@cybertec.at
When the checkpointer receives a SIGHUP signal to update its configuration,
it may need to update the shared memory for full_page_writes and need to
write a WAL record for it. Now, it is quite possible that the XLOG
machinery has not been initialized by that time and it will lead to
assertion failure while doing that. Fix is to allow the initialization of
the XLOG machinery outside critical section.
This bug has been introduced by the commit 2c03216d83 which added the XLOG
machinery initialization in RecoveryInProgress code path.
Reported-by: Dilip Kumar
Author: Dilip Kumar
Reviewed-by: Michael Paquier and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAFiTN-u4BA8KXcQUWDPNgaKAjDXC=C2whnzBM8TAcv=stckYUw@mail.gmail.com
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
XLogInsert fails to attach a required FPI to the first record after
full_page_writes is turned on by the last checkpoint. This bug got
introduced in 9.5 due to code rearrangement in commits 2c03216d83 and
2076db2aea. Fix it by ensuring that XLogInsertRecord performs a
recomputation when the given record is generated with FPW as off but
found that the flag has been turned on while actually inserting the
record.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila
Backpatch-through: 9.5 where this problem was introduced
Discussion: https://postgr.es/m/20180420.151043.74298611.horiguchi.kyotaro@lab.ntt.co.jp
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
Startup process has improved its calculation of incorrect minimum
consistent point in 8d68ee6, which ensures that all WAL available gets
replayed when doing crash recovery, and has introduced an incorrect
calculation of the minimum recovery point for non-startup processes,
which can cause incorrect page references on a standby when for example
the background writer flushed a couple of pages on-disk but was not
updating the control file to let a subsequent crash recovery replay to
where it should have.
The only case where this has been reported to be a problem is when a
standby needs to calculate the latest removed xid when replaying a btree
deletion record, so one would need connections on a standby that happen
just after recovery has thought it reached a consistent point. Using a
background worker which is started after the consistent point is reached
would be the easiest way to get into problems if it connects to a
database. Having clients which attempt to connect periodically could
also be a problem, but the odds of seeing this problem are much lower.
The fix used is pretty simple, as the idea is to give access to the
minimum recovery point written in the control file to non-startup
processes so as they use a reference, while the startup process still
initializes its own references of the minimum consistent point so as the
original problem with incorrect page references happening post-promotion
with a crash do not show up.
Reported-by: Alexander Kukushkin
Diagnosed-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Alexander Kukushkin
Discussion: https://postgr.es/m/153492341830.1368.3936905691758473953@wrigleys.postgresql.org
Backpatch-through: 9.3
Commit 4b0d28de06 has removed the prior checkpoint and related
facilities but has left WAL recycling based on the LSN of the prior
checkpoint, which causes incorrect calculations for WAL removal and
recycling for max_wal_size and min_wal_size. This commit changes things
so as the base calculation point is the last checkpoint generated.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20180723.135748.42558387.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch: 11-, where the prior checkpoint has been removed.
Those would use the default ERRCODE_INTERNAL_ERROR, but for foreseeable
failures an errcode ought to be set, ERRCODE_DATA_CORRUPTED making the
most sense here.
While on the way, fix one errcode_for_file_access missing in origin.c
since the code has been created, and remove one assignment of errno to 0
before calling read(), as this was around to fit with what was present
before 811b6e36 where errno would not be set when not enough bytes are
read. I have noticed the first one, and Tom has pinged me about the
second one.
Author: Michael Paquier
Reported-by: Tom Lane
Discussion: https://postgr.es/m/27265.1531925836@sss.pgh.pa.us
Some error messages which report something about a file operation use
as well context which is already provided within the path being worked
on, making things rather duplicated. This creates more work for
translators, and does not actually bring clarity.
More could be done, however in a lot of cases the context used is
actually useful, still that patch gets down things with a good cut.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/20180718044711.GA8565@paquier.xyz
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
Some error messages related to file handling are using the code path
context to define their state. For example, 2PC-related errors are
referring to "two-phase status files", or "relation mapping file" is
used for catalog-to-filenode mapping, however those prove to be
difficult to translate, and are not more helpful than just referring to
the path of the file being worked on. So simplify all those error
messages by just referring to files with their path used. In some
cases, like the manipulation of WAL segments, the context is actually
helpful so those are kept.
Calls to the system function read() have also been rather inconsistent
with their error handling sometimes not reporting the number of bytes
read, and some other code paths trying to use an errno which has not
been set. The in-core functions are using a more consistent pattern
with this patch, which checks for both errno if set or if an
inconsistent read is happening.
So as to care about pluralization when reading an unexpected number of
byte(s), "could not read: read %d of %zu" is used as error message, with
%d field being the output result of read() and %zu the expected size.
This simplifies the work of translators with less variations of the same
message.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180520000522.GB1603@paquier.xyz
Temporary WAL segments are created in pg_wal and named as xlogtemp.pid
before being renamed to the real deal when creating a new segment. If
an instance crashes after the temporary segment is created and before
the rename is done, then the server would finish with unremovable data.
After an instance crash, scan pg_wal and remove any such segments. With
repetitive unlucky crashes this would contribute to disk bloat and
presents risks of ENOSPC especially with max_wal_size close to the
maximum allowed.
Author: Michael Paquier
Reviewed-by: Yugo Nagata, Heikki Linnakangas
Discussion: https://postgr.es/m/20180514054955.GF1528@paquier.xyz
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
This has been visibly a forgotten spot in the first implementation of
wait events for I/O added by 249cf07, and what has been missing is a
fsync call for WAL segments which is a wrapper reacting on the value of
GUC wal_sync_method.
Reported-by: Konstantin Knizhnik
Author: Konstantin Knizhnik
Reviewed-by: Craig Ringer, Michael Paquier
Discussion: https://postgr.es/m/4a243897-0ad8-f471-aa40-242591f2476e@postgrespro.ru
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Heikki Linnakangas
Bruce Momjian
Alvaro Herrera
Robert Haas
Michael Paquier
Peter Eisentraut
Amit Kapila
Fujii Masao
Tom Lane
Thomas Munro
Peter Eisentraut
Andres Freund
Andrew Dunstan
Magnus Hagander
Stephen Frost
Simon Riggs