protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
queries over non-blocking connections with libpq. "Larger" here
basically means that it doesn't fit into the output buffer.
The basic strategy is to fix pqFlush and pqPutBytes.
The problem with pqFlush as it stands now is that it returns EOF when an
error occurs or when not all data could be sent. The latter case is
clearly not an error for a non-blocking connection but the caller can't
distringuish it from an error very well.
The first part of the fix is therefore to fix pqFlush. This is done by
to renaming it to pqSendSome which only differs from pqFlush in its
return values to allow the caller to make the above distinction and a
new pqFlush which is implemented in terms of pqSendSome and behaves
exactly like the old pqFlush.
The second part of the fix modifies pqPutBytes to use pqSendSome instead
of pqFlush and to either send all the data or if not all data can be
sent on a non-blocking connection to at least put all data into the
output buffer, enlarging it if necessary. The callers of pqPutBytes
don't have to be changed because from their point of view pqPutBytes
behaves like before. It either succeeds in queueing all output data or
fails with an error.
I've also added a new API function PQsendSome which analogously to
PQflush just calls pqSendSome. Programs using non-blocking queries
should use this new function. The main difference is that this function
will have to be called repeatedly (calling select() properly in between)
until all data has been written.
AFAICT, the code in CVS HEAD hasn't changed with respect to non-blocking
queries and this fix should work there, too, but I haven't tested that
yet.
Bernhard Herzog
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
discussion on pgsql-hackers (especially the frightening memory dump in
<12273.999562219@sss.pgh.pa.us>), we decided that it is best not to
use identifiers from an untrusted source at all. Therefore, all
claims of the suitability of PQescapeString() for identifiers have
been removed.
Florian Weimer
two additional files win32.mak and libpgtcl.def.
This patch allows to compile libpgtcl.dll on Windows
with tcl > 8.0. I've tested it on WinNT (VC6.0), SUSE Linux (7.0)
and Solaris 2.6 with tcl 8.3.3.
Mikhail Terekhov
> It seems that win9x doesn't have the "netmsg.dll" so it defaults to "normal"
> FormatMessage.
> I wonder if one could load wsock32.dll or winsock.dll on those systems
> instead of netmsg.dll.
>
> Mikhail, could you please test this code on your nt4 system?
> Could someone else test this code on a win98/95 system?
>
> It works on win2k over here.
It works on win2k here too but not on win98/95 or winNT.
Anyway, attached is the patch which uses Magnus's my_sock_strerror
function (renamed to winsock_strerror). The only difference is that
I put the code to load and unload netmsg.dll in the libpqdll.c
(is this OK Magnus?).
Mikhail Terekhov
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
it in a separate object. There's no value in keeping the state separate,
and it creates dangling-pointer problems. Also, remove PQsetenv routines
from public API, until and unless they are redesigned to have a safer
interface. Since they were never part of the documented API before 7.0,
it's unlikely that anyone is calling them.
array. This allows processing of conninfo strings to be made thread-safe,
at the cost of a small memory leak in applications that use
PQconndefaults() and are not updated to free the returned array via
the new PQconninfoFree() function. But PQconndefaults() is probably not
used very much, so this seems like a good compromise.
it seems more suitable for the naming convention in libpq.
New function PQsetClientEncoding added. It makes possible to change
the client encoding on the fly without setting PGCLIENTENCODING.
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
in libpq --- mostly, poor response to error conditions. You now actually
get to see the postmaster's 'The Data Base System is starting up' message,
which you didn't before. I suspect the SSL code is still broken though.
PQconnectStart
PQconnectPoll
PQresetStart
PQresetPoll
PQsetenvStart
PQsetenvPoll
PQsetenvAbort
and brings into the published interface
PQsetenv.
The first four are asynchronous analogues of PQconnectdb and PQreset -
they allow an application to connect to the DB without blocking on
remote I/O.
The PQsetenv functions perform an environment negotiation with the
server.
Internal to libpq, pqReadReady and pqWriteReady have been made available
across the library (they were previously static functions inside
fe-misc.c). A lot of internal rearrangement has been necessary to
support these changes.
The API documentation has been updated also.
Caveats:
o The Windows code does not default to using non-blocking sockets,
since I have no documentation: Define WIN32_NON_BLOCKING_CONNECTIONS to
do that.
o The SSL code still blocks.
Ewan Mellor.
* Add use of 'const' for varibles in source tree
(which is misspelled, btw.)
I went through the front-end libpq code and did so. This affects in
particular the various accessor functions (such as PQdb() and
PQgetvalue()) as well as, by necessity, the internal helpers they use.
I have been really thorough in that regard, perhaps some people will find
it annoying that things like
char * foo = PQgetvalue(res, 0, 0)
will generate a warning. On the other hand it _should_ generate one. This
is no real compatibility break, although a few clients will have to be
fixed to suppress warnings. (Which again would be in the spirit of the
above TODO.)
In addition I replaced some int's by size_t's and removed some warnings
(and generated some new ones -- grmpf!). Also I rewrote PQoidStatus (so it
actually honors the const!) and supplied a new function PQoidValue that
returns a proper Oid type. This is only front-end stuff, none of the
communicaton stuff was touched.
The psql patch also adds some new consts to honor the new libpq situation,
as well as fixes a fatal condition that resulted when using the -V
(--version) option and there is no database listening.
So, to summarize, the psql you should definitely put in (with or without
the libpq). If you think I went too far with the const-mania in libpq, let
me know and I'll make adjustments. If you approve it, I will also update
the docs.
-Peter
--
Peter Eisentraut Sernanders vaeg 10:115
One, it now returns the previous hook. That way people don't have to dig
around in libpq-int.h for that information anymore. It previously
returned void, so there should be no incompatibilities.
Second, you cannot set the callback to NULL anymore. (Of course you can
still call it with NULL just to get the current hook.) The way libpq uses
the callback pointer, having a NULL there wasn't very healthy.
Peter Eisentraut
Tom Lane
Bruce Momjian
Peter Eisentraut
Tatsuo Ishii