some cases of redundant clauses that were formerly not caught. We have
to special-case this because the clauses involved never get attached to
the same join restrictlist and so the existing logic does not notice
that they are redundant.
both clauses specify the same targets, rather than always using the
default ordering operator. This allows 'GROUP BY foo ORDER BY foo DESC'
to be done with only one sort step.
The output now validates as HTML 4.01 Strict, XHTML 1.0 strict,
and XHTML 1.1 (assuming you wrap it in a valid html/body document).
It also wraps the output of PGRES_COMMAND_OK if the HTML tag is on,
for full compliance: this is why html_escaped_print has to be
externalized.
Greg Sabino Mullane greg@turnstep.com
---------------------------------------------------------------------------
here is a patch that allows CIDR netmasks in pg_hba.conf. It allows two
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
Andrew Dunstan
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
minute and a half to decode a 500Kb on a fairly fast machine. I think the
culprit is sscanf.
I attach a patch that replaces the function with one used to perform the same
task in pyPgSQL (a Python interface to PostgreSQL). This code was written by
Billy Allie, author of pyPgSQL. I've changed a few variable names to match
those in the original code and removed a bit of Pythonness.
Billy has kindly looked at the code and points out that it is slightly
stricter than the original implementation and if it encounters an invalid
bytea such as '\12C' it drops the unescape '\' and outputs '12C'.
The code is licensed by the author under a BSD license.
I've performed limited testing of the function by putting JPEGs into
PostgreSQL, extracting them using them using the new function and diffing
against the original files.
The new function is significantly faster on my machine with the JPEGs being
decoded in less than a second. I attach a modified libpq example program that
I used for my testing.
Ben Lamb.
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
not all SQL identifiers taken from command line arguments. We decided
years ago that that was a bad idea: identifiers taken from the command
line should be treated as literally correct. Remove the inconsistent
code that has crept in recently. Also fix pg_dump so that the combination
of --schema and --table does what you'd expect, namely dump exactly one
table from exactly one schema. Per gripe from Deepak Bhole of Red Hat.
some reading on the subject.
1) PostgreSQL uses ephemeral keying, for its connections (good thing)
2) PostgreSQL doesn't set the cipher list that it allows (bad thing,
fixed)
3) PostgreSQL's renegotiation code wasn't text book correct (could be
bad, fixed)
4) The rate of renegotiating was insanely low (as Tom pointed out, set
to a more reasonable level)
I haven't checked around much to see if there are any other SSL bits
that need some review, but I'm doing some OpenSSL work right now
and'll send patches for improvements along the way (if I find them).
At the very least, the changes in this patch will make security folks
happier for sure. The constant renegotiation of sessions was likely a
boon to systems that had bad entropy gathering means (read: Slowaris
/dev/rand|/dev/urand != ANDIrand). The new limit for renegotiations
is 512MB which should be much more reasonable.
Sean Chittenden
I'd placed the check for newly created matching pk rows for on update no
action earlier than it needed to be so that it'd check even when the key
values hadn't changed. This patch moves it to after checking for NULLs
in the old row and comparing the values since the select's probably more
expensive.
Stephan Szabo
protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
catalog lookups when not in a transaction. This prevents bizarre
failures if someone tries to set a value for session_authorization in
postgresql.conf. Per report from Fernando Nasser.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
#define PG_ENCODING_BE_LAST PG_ISO_8859_8
#define PG_ENCODING_FE_LAST PG_WIN1256
but the last client encoding in the enum list is actually PG_GB18030 and
it seems that
#define PG_ENCODING_IS_CLIEN_ONLY(_enc) \
(((_enc) > PG_ENCODING_BE_LAST && (_enc) <= PG_ENCODING_FE_LAST)
can never be true.
I think the define should read
#define PG_ENCODING_FE_LAST PG_GB18030
On the other hand, perhaps no-one cares, because
PG_ENCODING_IS_CLIEN_ONLY is never used.
--
Oliver Elphick Oliver.Elphick@lfix.co.uk
when the plan is ReScanned, we don't have to rebuild the hash table
if there is no parameter change for its child node. This idea has
been used for a long time in Sort and Material nodes, but was not in
the hash code till now.
yy_fatal_error() call results in elog(ERROR) not exit(). This was
already fixed in the main lexer and plpgsql, but extend same technique
to all the other dot-l files. Also, on review of the possible calls
to yy_fatal_error(), it seems safe to use elog(ERROR) not elog(FATAL).
leave it for the kernel to do after the process dies. This allows clients
to wait for the backend to exit if they wish (after sending X message,
wait till EOF is detected on the socket).
progress, although all RTs pass using the V3 protocol on a 7.4 database and also pass using the V2 protocol on a 7.3 database.
SSL support is known not to work.
Modified Files:
jdbc/org/postgresql/PGConnection.java
jdbc/org/postgresql/errors.properties
jdbc/org/postgresql/core/BaseConnection.java
jdbc/org/postgresql/core/Encoding.java
jdbc/org/postgresql/core/Field.java
jdbc/org/postgresql/core/PGStream.java
jdbc/org/postgresql/core/QueryExecutor.java
jdbc/org/postgresql/core/StartupPacket.java
jdbc/org/postgresql/fastpath/Fastpath.java
jdbc/org/postgresql/fastpath/FastpathArg.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1Connection.java
jdbc/org/postgresql/test/jdbc2/BlobTest.java
jdbc/org/postgresql/test/jdbc2/CallableStmtTest.java
jdbc/org/postgresql/test/jdbc2/MiscTest.java
jdbc/org/postgresql/test/jdbc3/Jdbc3TestSuite.java
introducing new 'FastList' list-construction subroutines to use in
hot spots. This avoids the O(N^2) behavior of repeated lappend's
by keeping a tail pointer, while not changing behavior by reversing
list order as the lcons() method would do.
of order; the 'server log' output is actually client output in these
scenarios and we ought to treat elevels the same way as in the client
case. This allows initdb to not send backend stderr to /dev/null anymore,
which makes it much more likely that people will notice problems during
initdb.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
advertised in RowDescription message. Depending on the physical tuple's
column count is not really correct, since according to heap_getattr()
conventions the tuple may be short some columns, which will automatically
get read as nulls. Problem has been latent since forever, but was only
exposed by recent change to skip a projection step in SELECT * FROM...
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
single-byte encodings, and a direct C implementation of the single-argument
forms (where spaces are always what gets trimmed). This is in preparation
for using rtrim1() as the bpchar-to-text cast operator, but is a useful
performance improvement even if we decide not to do that.
independently of whether the struct tm tm_zone member exists.
Also run autoheader, which seems not to have been done lately;
it added about three more things to pg_config.h.in than I was expecting...
example from Rao Kumar. This is a very corner corner-case, requiring
a minimum of three closely-spaced database crashes and an unlucky
positioning of the second recovery's checkpoint record before you'd notice
any problem. But the consequences are dire enough that it's a must-fix.
Ross Reedstrom, a couple months back) and to detect timezones that are
using leap-second timekeeping. The unknown-zone-name test is pretty
heuristic and ugly, but it seems better than the old behavior of just
switching to GMT given a bad name. Also make DecodePosixTimezone() a
tad more robust.
on Linux and would have who knows what unpleasant effects on other platforms.
If you need another include file for Windows, then add it; don't go
messing with the semantics of every other port's include files.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
the type OID and typmod of the underlying base type. Per discussions
a few weeks ago with Andreas Pflug and others. Note that this behavioral
change affects both old- and new-protocol clients.
This makes no difference for existing uses, but allows SelectSortFunction()
and pred_test_simple_clause() to use indexscans instead of seqscans to
locate entries for a particular operator in pg_amop. Better yet, they can
use the SearchSysCacheList() API to cache the search results.
dropped. The simplest fix for INSERT/UPDATE cases turns out to be for
preptlist.c to insert NULLs of a known-good type (I used INT4) rather
than making them match the deleted column's type. Since the representation
of NULL is actually datatype-independent, this should work fine.
I also re-reverted the patch to disable the use_physical_tlist optimization
in the presence of dropped columns. It still doesn't look worth the
trouble to be smarter, if there are no other bugs to fix.
Added a regression test to catch future problems in this area.
where the table contains dropped columns. If the columns are dropped,
then their types may be gone as well, which causes ExecTypeFromTL() to
fail if the dropped columns appear in a plan node's tlist. This could
be worked around but I don't think the optimization is valuable enough
to be worth the trouble.
detected during buffer dump to be labeled with the buffer location.
For example, if a page LSN is clobbered, we now produce something like
ERROR: XLogFlush: request 2C000000/8468EC8 is not satisfied --- flushed only
to 0/8468EF0
CONTEXT: writing block 0 of relation 428946/566240
whereas before there was no convenient way to find out which page had
been trashed.
dead xlog segments are not considered part of a critical section. It is
not necessary to force a database-wide panic if we get a failure in these
operations. Per recent trouble reports.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
the connection when appropriate.
This checkin also adds the type map for jdbc3, however currently it is
identical to the jdbc2 mapping.
Modified Files:
jdbc/org/postgresql/core/BaseStatement.java
jdbc/org/postgresql/core/QueryExecutor.java
jdbc/org/postgresql/jdbc3/AbstractJdbc3Connection.java
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
Describe would claim that no tuples will be returned. Only affects
SELECTs added to non-SELECT base queries by rewrite rules. If you
want to see the output of such a select, you gotta use 'simple Query'
protocol.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
which does the same thing. Perhaps at one time there was a reason to
allow plan nodes to store their result types in different places, but
AFAICT that's been unnecessary for a good while.
avoids 'input buffer overflow' failure on long literals, improves
performance, gives the right answer for line position in functions
containing multiline literals, suppresses annoying compiler warnings,
and generally is so much better I wonder why we didn't do it before.
Per recent discussion on pgsql-general, this is appropriate for spec
compliance, and has the nice side-effect of easing porting from old
pg_dump files that exhibit the 59.999=>60.000 roundoff problem.
implementation limits, do not issue an ERROR; instead issue a NOTICE and use
the max supported value. Per pgsql-general discussion of 28-Apr, this is
needed to allow easy porting from pre-7.3 releases where the limits were
higher.
Unrelated change in same area: accept GLOBAL TEMP/TEMPORARY as a synonym
for TEMPORARY, as per pgsql-hackers discussion of 15-Apr. We previously
rejected it, but that was based on a misreading of the spec --- SQL92's
GLOBAL temp tables are really closer to what we have than their LOCAL ones.
per report from Olivier Prenant. Also fix off-by-one space calculation
in ReadToc; this woould not have hurt us until we had more than 100
dependencies for a single object, but wrong is wrong.
(agollapudi@demandsolutions.com).
Also applied the RefCursor support patch by Nic Ferrier. This patch allows
you too return a get a result set from a function that returns a refcursor.
For example:
call.registerOutParameter(1, Types.OTHER);
call.execute();
ResultSet rs = (ResultSet) call.getObject(1);
Modified Files:
jdbc/org/postgresql/core/BaseStatement.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1ResultSet.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1Statement.java
jdbc/org/postgresql/jdbc1/Jdbc1CallableStatement.java
jdbc/org/postgresql/jdbc1/Jdbc1PreparedStatement.java
jdbc/org/postgresql/jdbc1/Jdbc1Statement.java
jdbc/org/postgresql/jdbc2/AbstractJdbc2ResultSet.java
jdbc/org/postgresql/jdbc2/Jdbc2CallableStatement.java
jdbc/org/postgresql/jdbc2/Jdbc2PreparedStatement.java
jdbc/org/postgresql/jdbc2/Jdbc2Statement.java
jdbc/org/postgresql/jdbc3/Jdbc3CallableStatement.java
jdbc/org/postgresql/jdbc3/Jdbc3PreparedStatement.java
jdbc/org/postgresql/jdbc3/Jdbc3Statement.java
Added Files:
jdbc/org/postgresql/PGRefCursorResultSet.java
jdbc/org/postgresql/jdbc1/Jdbc1RefCursorResultSet.java
jdbc/org/postgresql/jdbc2/Jdbc2RefCursorResultSet.java
jdbc/org/postgresql/jdbc3/Jdbc3RefCursorResultSet.java
jdbc/org/postgresql/test/jdbc2/RefCursorTest.java
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
Without this fix, CVS tip dumps core when running the regression tests
with geqo_threshold = 2. I would think that a similar patch might be
needed in 7.3, but cannot duplicate the failure in that branch --- so
for now, leave well enough alone.
of extended query features in new FE/BE protocol. TransactionCommandContext
is gone (PortalContext replaces it for some purposes), and QueryContext
has taken on a new meaning (MessageContext plays its old role).
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
in all cases, leaked TopMemoryContext memory in others. Make the
interaction between SetClientEncoding and InitializeClientEncoding
cleaner and better documented. I suspect these changes should be
back-patched into 7.3, but will wait on Tatsuo's verification.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
Output \r\n termination on Win32.
Disallow literal carriage return as a data value,
backslash-carriage-return and \r still allowed.
Doc changes already committed.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
fixing an order by problem for index metadata results.
Also includes removing some unused code as well as a fix to the toString
method on statement.
Modified Files:
jdbc/org/postgresql/jdbc1/AbstractJdbc1DatabaseMetaData.java
jdbc/org/postgresql/jdbc1/AbstractJdbc1Statement.java
account for NULLs; in hindsight this is obvious since the code for
the MCV-lists case would reduce to this when there are zero entries
in both lists. Per example from Alec Mitchell.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
on UPDATE.
This get's rid of the long standing annoyance that updating a row
that has foreign keys locks all the referenced rows even if the
foreign key values do not change.
The trick is to actually do a check identical to NO ACTION after an
eventually done UPDATE in the SET DEFAULT case. Since a SET DEFAULT
operation should have moved referencing rows to a new "home", a following
NO ACTION check can only fail if the column defaults of the referencing
table resulted in the key we actually deleted. Thanks to Stephan.
Jan
find out about it is to read the documentation that tells you how
dangerous it is. Add default_transaction_read_only to documentation;
seems to have been overlooked in patch that added read-only transactions.
Clean up check_guc comparison script, which has been suffering bit rot.
an unneeded memory context and some variables that are not used anymore.
It's pretty trivial and the regression tests pass fine. There's no
change in functionality, only deletion of unused code. I left an empty
function because maybe I'll need it for nested transactions.
Alvaro Herrera
harmless on signed-char machines but would lead to core dump in the
deadlock detection code if char is unsigned. Amazingly, this bug has
been here since 7.1 and yet wasn't reported till now. Thanks to Robert
Bruccoleri for providing the opportunity to track it down.