'aggname (aggtype)'. The old syntax 'aggname aggtype' is still accepted
for backwards compatibility. Fix pg_dump, which was actually broken for
most cases of user-defined aggregates. Clean up error messages associated
with these commands.
time zones.
SQL99 spec requires a default of zero (round to seconds) which is set
in gram.y as typmod is set in the parse tree. We *could* change to a
default of either 6 (for internal compatibility with previous versions)
or 2 (for external compatibility with previous versions).
Evaluate entries in pg_proc wrt the iscachable attribute for timestamp and
other date/time types. Try to recognize cases where side effects like the
current time zone setting may have an effect on results to decide whether
something is cachable or not.
Frank Miles 7-Sep-01. This is really just sticking a finger in the dike.
Frank's case works now, but we still couldn't support a recursive function
returning a set. Really need to restructure querytrees and execution
state so that the querytree is *read only*. We've run into this over and
over and over again ... it has to happen sometime soon.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
pg_stats to provide controlled (and, hopefully, more readable) access
to statistics. Comments on definition of pg_stats welcome.
I didn't force initdb, but the rules regress test will fail until you
do one.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
right, but it failed to get the padding case right.
This was obscured by subsequent application of bpchar() in all but one
regression test case, and that one didn't fail in an obvious way ---
trailing blanks are hard to see. Add another test case to make it
more obvious if it breaks again.
when added by alter table add constraint. The first file
patches backend/commands/command.c and the latter is a patch
to the alter table regression test.
Stephan Szabo
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
in referencing and referenced columns of an fk constraint
aren't comparable using '=' at constraint definition time
rather than insert/update time.
Stephan Szabo
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
(which failed miserably during DST) to just compare against a time
derived from a timestamp value.
Certainly not a direct check for a correct result, but should work
at any time of year.
in CREATE TABLE, but give a warning notice. Clean up inconsistent
handling of defaults and NOT NULL flags from multiply-inherited columns.
Per pghackers discussion 28-Mar through 30-Mar.
I posted this to the list a few days ago, but it was not addressed. Can
someone please make the changes to the src/test/regress/resultmap?
Thanks.
- brandon
option of CREATE DATABASE. In pg_regress, create regression database
from template0 to ensure that any installation-local cruft in template1
will not mess up the tests.
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
regression tests for Pgsql 7.1beta3 pass. This is very similr to the one I
submitted back in July for Linux/Alpha. Apparently non-x86 Linux machines
like to compute nth place float point digits like Sun/Solaris does?
Otherwise, 7.1beta3 runs without problems (i.e. all other
regression tests pass) on my Sparc 20 running Debian GNU/Linux 2.2.
Ryan Kirkpatrick
truncating to integer. Remove regress test that checks whether
4567890123456789 can be converted to float without loss; since that's
52 bits, it's on the hairy edge of failing with IEEE float8s, and indeed
rint seems to give platform-dependent results for it.
* doc/FAQ_MSWIN: Update to be consistent with software -- mainly change
comment from lack of Cygwin UNIX domain socket support and to list of
current Cygwin UNIX domain socket issues.
* src/include/config.h.in: Enable UNIX domain sockets for Cygwin.
* src/include/port/win.h: Disable UNIX domain sockets for Cygwin b20.1.
* src/test/regress/pg_regress.sh: Use UNIX domain sockets for Cygwin
instead of TCP/IP.
#! /usr/local/bin/perl -w
to
#! /usr/bin/perl
The path is probably more portable, and the -w was kind of silly for a six
line script that produces two warnings as it stands.
mixed-signs. Previous effort left way too many minus signs, and was at
least as broken as the one before that :(
Clean up "ISO-style" time interval representation to omit zero fields if
there is at least one non-zero field. Supress some leading plus signs
when not necessary for clarity.
Replace every #ifdef __CYGWIN__ block with a cleaner TIMEZONE_GLOBAL macro
defined in datetime.h.
and revert documentation to describe the existing INHERITS clause
instead, per recent discussion in pghackers. Also fix implementation
of SQL_inheritance SET variable: it is not cool to look at this var
during the initial parsing phase, only during parse_analyze(). See
recent bug report concerning misinterpretation of date constants just
after a SET TIMEZONE command. gram.y really has to be an invariant
transformation of the query string to a raw parsetree; anything that
can vary with time must be done during parse analysis.
recommendation from Paul Vixie. Add a new abbrev() function to produce
abbreviated format as text. No forced initdb, but new function is not
available unless you do an initdb or add the pg_proc row manually.
comparison does not consider paths different when they differ only in
uninteresting aspects of sort order. (We had a special case of this
consideration for indexscans already, but generalize it to apply to
ordered join paths too.) Be stricter about what is a canonical pathkey
to allow faster pathkey comparison. Cache canonical pathkeys and
dispersion stats for left and right sides of a RestrictInfo's clause,
to avoid repeated computation. Total speedup will depend on number of
tables in a query, but I see about 4x speedup of planning phase for
a sample seven-table query.
I believe this should fix the issue that Philip Warner
noticed about the check for unique constraints meeting the
referenced keys of a foreign key constraint allowing the
specification of a subset of a foreign key instead of
rejecting it. I also added tests for a base case of
this to the foreign key and alter table tests and patches
for expected output.
Allow some operator-like tokens to be used as function names.
Flesh out support for time, timetz, and interval operators
and interactions.
Regression tests pass, but non-reference-platform horology test results
will need to be updated.
it fixing Y,YY,YYY,YYYY conversion, the docs and regress tests update
are included too.
During the patch testing I found small bug in miscadmin.h in
convertstr() declaration. Here it's fixed too.
Thanks
Karel
rather than just being aliases for int4in/int4out. Give type Oid a
full set of comparison operators that do proper unsigned comparison,
instead of reusing the int4 comparators. Since pg_dump is now doing
unsigned comparisons of OIDs, it is now *necessary* that we play by
the rules here. In fact, given that btoidcmp() has been doing unsigned
comparison for quite some time, it seems likely that we have index-
corruption problems in 7.0 and before once the Oid counter goes past
2G. Fixing these operators is a necessary step before we can think
about 8-byte Oid, too.
new separate relkind for views (per some discussion back in September).
I didn't force initdb, but rules regress test will show differences
until you do one.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
functions, per recent discussions on pghackers. For now, I have called
the verbose-display formatting function text(), but will reconsider if
enough people object.
initdb forced.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
Bruce Hartzler <bruceh@mail.utexas.edu>. It contains shared library
support, regression test map, and the usual template files. The dynamic
loader is missing, the spin lock code apparently doesn't assemble due to
syntax problems, and semaphores are to be hoped for from Apple.
on pghackers. Arrange for the sort ordering of general INET values
to be network part as major sort key, host part as minor sort key.
I did not force an initdb for this change, but anyone who's running
indexes on general INET values may need to recreate those indexes.
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
particular, allow linking with arbitrary commands rather than only $(AR) or
$(LD), and treat C++ without hacks.
Add option to disable shared libraries. This takes the place of the
BSD_SHLIB variable. The regression test driver ignores the plpgsql test
if there are no shared libraries available.
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
* doc/src/sgml/installation.sgml: ditto.
* src/test/regress/README: Regenerate.
* doc/src/sgml/docguide.sgml: Explain how it was done. Explain how
INSTALL and HISTORY are (now) generated.
* doc/src/sgml/Makefile: Implement HISTORY generation to be analoguous
to INSTALL.
I have noticed that there are some identical files in
postgresql-7.0.2/src/test/regress/expected/
> diff float8-cygwin.out float8-small-is-zero.out #I recommend deleting
float8-cygwin.out
> diff geometry-cygwin-precision.out geometry-solaris-precision.out #I
recommend deleting geometry-cygwin-precision.out
below is the diff of postgresql-7.0.2/src/test/regress/resultmap
that has the above files deleted plus the addition of an alpha regression
test built with alphaev56-dec-osf4.0e/2.95.2/ . The alpha geometry
regression file is attached
11c11
< float8/i.86-pc-cygwin*=float8-cygwin
---
> float8/i.86-pc-cygwin*=float8-small-is-zero
18c18
< geometry/i.86-pc-cygwin*=geometry-cygwin-precision
---
> geometry/i.86-pc-cygwin*=geometry-solaris-precision
21a22
> geometry/alpha.*-dec-osf=geometry-alpha-precision
Ricardo Muggli
Systems Manager
Information and Technology Services
Minnesota State University, Mankato
I have counted 9 differences in the least significant digit compared
with geometry-positive-zeros.out. It would be wise for someone else
to double check.
Pete Forman
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
and the fmgr redesign.
It makes the homebrewn dl*() functions for more recent Versions of AIX
obsolete
by using the system dl*() functions instead.
It also fixes the expected file for the horology regression test.
Please regenerate configure from configure.in, I don't have the
environment/time.
Andreas
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
There is still no effective difference but it will kick in once setuid
functions exist (not included here). Make old getpgusername() alias for
current_user.
regression tests for specific types, and move a few others to the
cross-type "horology" test.
Rearrange the test order slightly, and move the abstime test to the
"parallel safe" area.
Hand-patch the results for "1947" and for "solaris", so those may not
be exactly correct.
for views. Views are now have a "relkind" of
RELKIND_VIEW instead of RELKIND_RELATION.
Also, views no longer have actual heap storage
files.
The following changes were made
1. CREATE VIEW sets the new relkind
2. The executor complains if a DELETE or
INSERT references a view.
3. DROP RULE complains if an attempt is made
to delete a view SELECT rule.
4. CREATE RULE "_RETmytable" AS ON SELECT TO mytable DO INSTEAD ...
1. checks to make sure mytable is empty.
2. sets the relkind to RELKIND_VIEW.
3. deletes the heap storage files.
5. LOCK myview is not allowed. :)
6. the regression test type_sanity was changed to
account for the new relkind value.
7. CREATE INDEX ON myview ... is not allowed.
8. VACUUM myview is not allowed.
VACUUM automatically skips views when do the entire
database.
9. TRUNCATE myview is not allowed.
THINGS LEFT TO THINK ABOUT
o pg_views
o pg_dump
o pgsql (\d \dv)
o Do we really want to be able to inherit from views?
o Is 'DROP TABLE myview' OK?
--
Mark Hollomon
The regression tests abstime, horology, int2, int4, and tinterval fail
by default. They will pass if comparison is made to one of the
variant expected/*.out files.
(A related problem is that the geometry test fails. This seems to be
just a matter of FP precision but more rigorous inspection is needed.
No existing expected/geometry-*.out variant matches.)
Pete Forman
didn't hear anything about, but which would
have broken with the function manager changes
anyway.
Well, this patch checks that a unique constraint
of some form (unique or pk) is on the referenced
columns of an FK constraint and that the columns
in the referencing table exist at creation time.
The former is to move closer to SQL compatibility
and the latter is in answer to a bug report.
I also added a basic check of this functionality
to the alter table and foreign key regression
tests.
Stephan Szabo
sszabo@bigpanda.com
Update functions to new-style fmgr, make BIT and VARBIT be binary-
equivalent, add entries to allow these types to be btree indexed,
correct a few bugs. BIT/VARBIT are now toastable, too.
NOTE: initdb forced due to catalog updates.
rather than the "~~" operator; this made it easy to add ESCAPE features.
Implement ILIKE, NOT ILIKE, and the ESCAPE clause for them.
afaict this is not MultiByte clean, but lots of other stuff isn't either.
Fix up underlying support code for LIKE/NOT LIKE.
Things should be faster and does not require internal string copying.
Update regression test to add explicit checks for
LIKE/NOT LIKE/ILIKE/NOT ILIKE.
Remove colon and semi-colon operators as threatened in 7.0.
Implement SQL99 COMMIT/AND NO CHAIN.
Throw elog(ERROR) on COMMIT/AND CHAIN per spec
since we don't yet support it.
Implement SQL99 CREATE/DROP SCHEMA as equivalent to CREATE DATABASE.
This is only a stopgap or demo since schemas will have another
implementation soon.
Remove a few unused production rules to get rid of warnings
which crept in on the last commit.
Fix up tabbing in some places by removing embedded spaces.
on myself to do something about the non-self-consistency of the inet
comparison functions. The results are probably still semantically wrong
(inet and cidr should have different comparison semantics, I think)
but at least the boolean operators now agree with each other and with
the sort order of indexes on inet/cidr.
(Sorry, couldn't help it...)
Removed type filename as well, since it's unused and probably useless.
INITDB FORCED, because pg_rewrite columns are now plain text again.
allows fixing problems with operators that expected to be able to
return a NULL, such as the '#' line-segment-intersection operator
that tried to return NULL when the two segments don't intersect.
(See, eg, bug report from 1-Nov-99 on pghackers.) Fix some other
bugs in passing, such as backwards comparison in path_distance().
the planner may try to generate them as a result of transitivity of the
existing int2-vs-int4 and int4-vs-int8 operators. In fact, it is now
necessary that mergejoinable cross-datatype operators form closed sets.
Add an opr_sanity regress test to detect missing operators.
varlena elements work now. Allow assignment to previously-nonexistent
subscript position to extend array, but only for 1-D arrays and only
if adjacent to existing positions (could do more if we had a way to
represent nulls in arrays, but I don't want to tackle that now).
Arrange for assignment of NULL to an array element in UPDATE to be a
no-op, rather than setting the entire array to NULL as it used to.
(Throwing an error would be a reasonable alternative, but it's never
done that...) Update regress test accordingly.
type different from input type but are expecting ExecAgg to insert the
first non-null input as the starting transition value. This has always
been verboten, but wasn't checked for until now...
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
Include updates for the comment.sql regression test.
Implement SET SESSION CHARACTERISTICS and SET DefaultXactIsoLevel.
Implement SET SESSION CHARACTERISTICS TRANSACTION COMMIT
and SET AutoCommit in the parser only.
Need to add code to actually do something.
Implement WITHOUT TIME ZONE type qualifier.
Define SCHEMA keyword, along with stubbed-out grammar.
Implement "[IN|INOUT|OUT] [varname] type" function arguments
in parser only; INOUT and OUT throws an elog(ERROR).
Add PATH as a type-specific token, since PATH is in SQL99
to support schema resource search and resolution.
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
functional.
Handle include file installation in src/include/Makefile
genbki.sh improvements: Don't substitute anything by config.status,
instead pass in AWK and CPP through environment. Change calling
convention to support named output files, so we get to see error
messages on stderr.
Rename bootstrap template files and install them into PREFIX/share.
Update initdb to that effect and other readability improvements
in initdb.
Now the to_timestamp() support WW,W,J,SSSS,DDD conversion from strings and
the am/pm bug is fixed, the to_char() use week-of-year (WW) full compatible
with Oracle.
This patch update relevant regress-tests and docs too.
Karel
~
~
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
is in <string> and not in <string.h> on QNX4/egcs-2.91.60.
Probably this can be changed for all platforms. The test in line 1705 uses
<string> as well. Because I am not sure, I havn't this included into the
patch.
doc/Makefile has to be sligthly modified as it has been done for
src/backend/Makefile due to a QNX4 problem (patch attached)
Furthermore src/test/regress/run_check.sh needs to be patched as it has been
done for regress.sh (patch attached). Please note that in the patch the
postmaster is started always with the -i option.
run_check.sh reports the test "limit" as failed, but in reallity it is OK.
regress.sh reports it as OK.
Andreas Kardos
just use the portable form,
tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
There were a bunch of places that weren't paying attention to configure's
result anyway (including configure itself!?); clean them up too.
Add a random number generator and seed setter (random(), SET SEED)
Fix up the interval*float8 math to carry partial months
into the time field.
Add float8*interval so we have symmetry in the available math.
Fix the parser and define.c to accept SQL92 types as field arguments.
Fix the parser to accept SQL92 types for CREATE TYPE, etc. This is
necessary to allow...
Bit/varbit support in contrib/bit cleaned up to compile and load
cleanly. Still needs some work before final release.
Implement the "SOME" keyword as a synonym for "ANY" per SQL92.
Implement ascii(text), ichar(int4), repeat(text,int4) to help
support the ODBC driver.
Enable the TRUNCATE() function mapping in the ODBC driver.
- I was unable to compile ecpg due to the ":=" instead of "=" in defining
LIBPQDIR and some other variables in Makefile.global.in
- pg_id (and also pg_encoding) executable was not removed during "make
clean" - there was no $(X) appended to the executable name for rm
- I have added result for int2, int4, float8 and geometry regression tests
- int2, int2 - yet another message for too large numbers ;-)
- float8 - it is problably a bug in the newlib C library - it has no
error message for numbers with exponent -400
- geometry - differences in precision of float numbers
- I have added appropriate lines into resultmap file
- I have modified the script regress.sh to use "case" statement when testing
the hostname. For cygwin the script is called with "i686-pc-cygwin" (on my
machine) as a parameter and this was not catched with the "if" statement.
The check was done for PORTNAME (win) and not HOSTNAME (i.86-pc-cygwin*).
The patch for described modifications is included.
All this modifications can be applied to "current" tree too.
The compilation was done on CygwinB20.1 with gcc 2.95, cygipc library 1.05.
The binaries were able to run also on the newest development snapshot
(2000-03-25).
Dan
1. C++ style comments in C source for ecpg ( // comment )
2. compiler finds wrong include file extern.h in ecpg/lib/descriptor.c
from
include path instead of workdir (rename it ?)
3. fe-connect getsockopt takes a socklen_t as fifth arg not int (use
SOCKET_SIZE_TYPE instead)
4. char vs unsigned char in psql calls to libpq
5. empty define that results in an empty but terminated line ( ; )
Now for all but point 3 I can supply changes to the
compiler flags, to make the compiler less pedantic.
Or is someone interested in the complications ?
in the meantime can someone apply the attached patch ?
Andreas
We probably support a superset of the spec, but I don't have the spec
to confirm this.
Update regression tests to include tests for this format.
Update geometry.out with results from Linux RH 5.2 system
(for last decimal place).
We probably support a superset of the spec, but I don't have the spec
to confirm this.
Update regression tests to include tests for this format.
Fix single-space typo in printed message in regress.sh.
after trying to resolve the item as an input-column name. This allows us
to be compliant with the SQL92 spec for queries that fall within the spec,
while still accepting the same out-of-spec queries as 6.5 did. You'll only
lose if there is an output column name that is the same as an input
column name, but doesn't refer to the same value. 7.0 will interpret
such a GROUP BY spec differently than 6.5 did. No way around that, because
6.5 was clearly not spec compliant.
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
The regression test script runcheck.sh doesn't seem able to
handle the blank line on the end of the resultmap file.
Here's a patch to remove it!!
Keith.
the to_char() source code is large, here are regression tests for
numeric/timestamp/int8 part. It is probably enough test for formatting
code in the formatting.c module. The others (float4/float8/int4) types
share this formatting code and eventual bugs for these types aren't
few probable.
Patch fix timestamp_to_char() for infinity/invalid timestamp too.
Karel
2. Regression tests fail for types int2 and int4 (which can easily be
fixed by adding entries to resultmap) aswell as float8 and geometry,
where floating point numbers appear to be rounded a little differently
than in your expected results (besides that I also need the positive
zeros file). I'm including a patch for the first 2, but I don't know
whether the latter two are actually a bug in postgres or a bug in the
OS or even allowed difference. I'm including my results for reference.
Rolf Grossmann
tests for the Foreign Key support in 7.0 which
was made against a CVS copy from this
afternoon.
This modifies
src/test/regress/sql/run_check.tests
src/test/regress/sql/alter_table.sql
src/test/regress/expected/alter_table.out
src/test/regress/sql/foreign_key.sql
src/test/regress/expected/foreign_key.out
sszabo@bigpanda.co
interpret a column name as an output column alias (targetlist AS name),
ather than a real column name as it ought to. According to the spec,
only ORDER BY should look at output column names. I left in GROUP BY's
willingness to use an output column number ('GROUP BY 2'), even though
this is also contrary to the spec --- again, only ORDER BY is supposed
to accept that. But there is no possible reason to want to GROUP BY
an integer constant, so keeping this old behavior won't break any
SQL-compliant queries. DISTINCT ON will behave the same as GROUP BY.
Change numerology regress test, which depended on the incorrect
behavior.
erroneous expected output for RESET DateStyle: should be ISO now.
Fix run_check.sh so that test postmaster is started with PGDATESTYLE=ISO,
else the horology test won't pass.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
regression tests so I prepared a set of expected
files to make things look OK.
There's also a file to account for minor variations
in the geopmetry output and a resultmap patch to
pull them all together.
With these changes PostgreSQL, from CVS, builds and
regression tests (runcheck) cleanly.
Keith Parks.
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
fact the same, so I suggest they could be the same file say
geometry-positive-zeros.out, as the main difference seems to be not printing
eg. (0,-0). In src/test/regress/expected, I propose
rm int2-i386-netbsd.out int4-i386-netbsd.out
mv geometry-hppa1.1.out geometry-positive-zeros.out
rm geometry-hppa2.0.out geometry-i386-netbsd.out
and the following patch to resultmap. I have only tested the netbsd results
on i386, but think that in all probability the differences will be the same
for other ports. If it turns out not to be the case, at least we might find
out.
Patrick Welche
from a constraint condition does not violate the constraint (cf. discussion
on pghackers 12/9/99). Implemented by adding a parameter to ExecQual,
specifying whether to return TRUE or FALSE when the qual result is
really NULL in three-valued boolean logic. Currently, ExecRelCheck is
the only caller that asks for TRUE, but if we find any other places that
have the wrong response to NULL, it'll be easy to fix them.
Instead of hard-wiring one result file per platform, there is a map file
'resultmap' that says which one to use --- a lot like template/.similar.
I have only created entries in resultmap for my own platform (HPUX) so
far; feel free to add lines for other platforms.
which is broken in some weird way that I don't understand. I think it
may be exposing a bug in the new psql --- for one thing, I get different
results when I run psql by hand than the regress script gets. What
the heck???
Tom Lane
Thomas G. Lockhart
Bruce Momjian
Tatsuo Ishii
Peter Eisentraut
Jan Wieck
Marc G. Fournier