search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
Commit 6271fceb8 changed PostgresNode.pm to force log_min_messages = debug1
in all TAP tests, without any discussion and without a concrete need for
it. This makes some of the TAP tests noticeably slower (although much of
that may be due to poorly-written regexes), and for certain it's bloating
the buildfarm logs. Revert the change.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This was nearly the same code. Extend wait_for_catchup to allow waiting
for pg_current_wal_lsn() and use that in the subscription tests. Also
change one use in the pg_rewind tests to use this.
Also remove some broken code in wait_for_catchup and
wait_for_slot_catchup. The error message in case the waiting failed
wanted to show the current LSN, but the way it was written never
worked. So since nobody ever cared, just remove it.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This is only used in the pg_rewind tests, so only set it there. It's
better if other tests run closer to a default configuration.
Author: Michael Paquier <michael.paquier@gmail.com>
This moves the data directories from using temporary directories with
randomness in the directory name to a static name, to make it easier to
debug. The data directory will be retained if tests fail or the test
code dies/exits with failure, and is automatically removed on the next
make check.
If the environment variable PG_TEST_NOCLEAN is defined, the data
directories will be retained regardless of test or exit status.
Author: Daniel Gustafsson <daniel@yesql.se>
This module becomes much more useful if we allow it to be used as base
class for external projects. To achieve this, change the exported
get_new_node function into a class method instead, and use the standard
Perl idiom of accepting the class as first argument. This method works
as expected for subclasses. The standalone function is kept for
backwards compatibility, though it could be removed in pg11.
Author: Chap Flackman, based on an earlier patch from Craig Ringer
Discussion: https://postgr.es/m/CAMsr+YF8kO+4+K-_U4PtN==2FndJ+5Bn6A19XHhMiBykEwv0wA@mail.gmail.com
By default, Perl's split() function drops trailing empty fields,
which is not what we want here. Oversight in commit fb093e4cb.
We'd managed to miss it thus far thanks to the very limited usage
of this function.
Discussion: https://postgr.es/m/14837.1499029831@sss.pgh.pa.us
Add an optional "expected" argument to override the default assumption
that we're waiting for the query to return "t". This allows replacing
a handwritten polling loop in recovery/t/007_sync_rep.pl with use of
poll_query_until(); AFAICS that's the only remaining ad-hoc polling
loop in our TAP tests.
Change poll_query_until() to probe ten times per second not once per
second. Like some similar changes I've been making recently, the
one-second interval seems to be rooted in ancient traditions rather
than the actual likely wait duration on modern machines. I'd consider
reducing it further if there were a convenient way to spawn just one
psql for the whole loop rather than one per probe attempt.
Discussion: https://postgr.es/m/12486.1498938782@sss.pgh.pa.us
Several callers of PostgresNode::poll_query_until() neglected to check
for failure; I do not think that's optional. Also, rewrite one place
that had reinvented poll_query_until() for no very good reason.
By default, wal_retrieve_retry_interval is five seconds, which is far
more than is needed in any of our TAP tests, leaving the test cases
just twiddling their thumbs for significant stretches. Moreover,
because it's so large, we get basically no testing of the retry-before-
master-is-ready code path. Hence, make PostgresNode::init set up
wal_retrieve_retry_interval = '500ms' as part of its customization of
test clusters' postgresql.conf. This shaves quite a few seconds off
the runtime of the recovery TAP tests.
Back-patch into 9.6. We have wal_retrieve_retry_interval in 9.5,
but the test infrastructure isn't there.
Discussion: https://postgr.es/m/31624.1498500416@sss.pgh.pa.us
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
archive_command and restore_command need to refer to Windows paths, not
Msys virtual file system paths, as postgres is completely unaware of the
latter, so prefix them with the Windows path to the virtual file system
root. Clean psql and pg_recvlogical output of carriage returns.
PostgresNode blithely ignored the exit status of pg_ctl, and in general
made no effort to be sure that the server was running when it should be.
This caused it to miss server crashes, which is a serious shortcoming
in a test scaffold. Make it complain if pg_ctl fails, and modify the
start and stop logic to complain if the server doesn't start, or doesn't
stop, when expected.
Also, have it turn off the "restart_after_crash" configuration parameter
in created clusters, as bitter experience has shown that leaving that on
can mask crashes too.
We might at some point need variant functions that allow for, eg,
server start failure to be expected. But no existing test case appears
to want that, and it surely shouldn't be the default behavior.
Note that this *will* break the buildfarm, as it will expose known
bugs that the previous testing failed to. I'm committing it despite
that, to verify that we get the expected failures in the buildfarm
not just in manual testing.
Back-patch into 9.6 where PostgresNode was introduced. (The 9.6
branch is not expected to show any failures.)
Discussion: https://postgr.es/m/21432.1492886428@sss.pgh.pa.us
Although the documentation for append_conf said clearly that it didn't
add a newline, many test authors seem to have forgotten that ... or maybe
they just consulted the example at the top of the POD documentation,
which clearly shows adding a config entry without bothering to add a
trailing newline. The worst part of that is that it works, as long as
you don't do it more than once, since the backend isn't picky about
whether config files end with newlines. So there's not a strong forcing
function reminding test authors not to do it like that. Upshot is that
this is a terribly fragile way to go about things, and there's at least
one existing test case that is demonstrably broken and not testing what
it thinks it is.
Let's just make append_conf append a newline, instead; that is clearly
way safer than the old definition.
I also cleaned up a few call sites that were unnecessarily ugly.
(I left things alone in places where it's plausible that additional
config lines would need to be added someday.)
Back-patch the change in append_conf itself to 9.6 where it was added,
as having a definitional inconsistency between branches would obviously
be pretty hazardous for back-patching TAP tests. The other changes are
just cosmetic and don't need to be back-patched.
Discussion: https://postgr.es/m/19751.1492892376@sss.pgh.pa.us
The previous default 'pg_log' might have indicated by its "pg_" prefix
that it is an internal system directory. The new default is more in
line with the typical naming of directories with user-facing log files.
Together with the renaming of pg_clog and pg_xlog, this should clear up
that difference.
Author: Andreas Karlsson <andreas@proxel.se>
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Allows testing of logical decoding using SQL interface and/or pg_recvlogical
Most logical decoding tests are in contrib/test_decoding. This module
is for work that doesn't fit well there, like where server restarts
are required.
Craig Ringer
initdb now initializes a pg_hba.conf that allows replication connections
from the local host, same as it does for regular connections. The
connecting user still needs to have the REPLICATION attribute or be a
superuser.
The intent is to allow pg_basebackup from the local host to succeed
without requiring additional configuration.
Michael Paquier <michael.paquier@gmail.com> and me
Newer Perl or IPC::Run versions default to appending the filename to string
exceptions, e.g. the exception
psql timed out
is thrown as
psql timed out at /usr/share/perl5/vendor_perl/IPC/Run.pm line 2961.
To handle this, match exceptions with !~ rather than ne.
From: Craig Ringer <craig@2ndquadrant.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Add methods to the core test framework PostgresNode.pm to allow us to
test that standby nodes have caught up with the master, as well as
basic LSN handling. Used in tests recovery/t/001_stream_rep.pl and
recovery/t/004_timeline_switch.pl
Craig Ringer, reviewed by Aleksander Alekseev and Simon Riggs
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
Switch TAP tests to use the new wait mode of pg_ctl promote. This
allows avoiding extra logic with poll_query_until() to be sure that a
promoted standby is ready for read-write queries.
From: Michael Paquier <michael.paquier@gmail.com>
--noclean and --nosync were the only options spelled without a hyphen,
so change this for consistency with other options. The options in
pg_basebackup have not been in a release, so we just rename them. For
initdb, we retain the old variants.
Vik Fearing and me
Before pg_regress runs psql, set the application name to the test name.
Similarly, set the application name to the test file name in the TAP
tests. Also, set a default log_line_prefix that show the application
name, as well as the PID and a time stamp.
That way, the server log output can be correlated to the test input
files, making debugging a bit easier.
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
Michael Paquier
Andrew Dunstan
Tom Lane
Peter Eisentraut
Magnus Hagander
Stephen Frost
Simon Riggs
Alvaro Herrera
Bruce Momjian
Robert Haas