expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
is used to find start scan position of Indexscan-s.
To speed up finding scan start position,I have changed
_bt_first() to use as many keys as possible.
I'll attach the patch here.
Regards.
Hiroshi Inoue
* Buffer refcount cleanup (per my "progress report" to pghackers, 9/22).
* Add links to backend PROC structs to sinval's array of per-backend info,
and use these links for routines that need to check the state of all
backends (rather than the slow, complicated search of the ShmemIndex
hashtable that was used before). Add databaseOID to PROC structs.
* Use this to implement an interlock that prevents DESTROY DATABASE of
a database containing running backends. (It's a little tricky to prevent
a concurrently-starting backend from getting in there, since the new
backend is not able to lock anything at the time it tries to look up
its database in pg_database. My solution is to recheck that the DB is
OK at the end of InitPostgres. It may not be a 100% solution, but it's
a lot better than no interlock at all...)
* In ALTER TABLE RENAME, flush buffers for the relation before doing the
rename of the physical files, to ensure we don't get failures later from
mdblindwrt().
* Update TRUNCATE patch so that it actually compiles against current
sources :-(.
You should do "make clean all" after pulling these changes.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
See attached mail for more details.
-------------------------------------------------------------------
From: "Vadim Mikheev" <vadim@krs.ru>
To: "Hiroshi Inoue" <Inoue@tpf.co.jp>
References: <000201befa94$42fe04c0$2801007e@cadzone.tpf.co.jp>
Subject: Re: elog(ERROR) in vacuum
Date: Fri, 10 Sep 1999 10:27:10 +0900
Organization: OJSC Rostelecom (Krasnoyarsk)
Message-ID: <37D85E6E.5AFA126D@krs.ru>
Hiroshi Inoue wrote:
>
> Hello Vadim,
>
> I have a question about vacuum.
>
> VACUUM has a phase like commit which calls TransactionIdCommit().
> But if elog(ERROR) occured after that,the status of transaction is
> changed from XID_COMMIT to XID_ABORT.
>
> Seems to me this causes inconsistency.
> Shoudn't AbortTransaction() be changed not to call TransacionIdAbort()
> in case of vacuum.
You're right!
As usual -:)
Vadim
transaction abort --- before it only worked if there was exactly one level
of allocation context stacked in the blank portal. Now it does the right
thing for any depth, including zero...
has positive refcount, it is rebuilt from pg_class data. This ensures
that relcache entries will track changes made by other backends. Formerly,
a shared inval report would just be ignored if it happened to arrive while
the relcache entry was in use. Also, fix relcache to reset ref counts
to zero during transaction abort. Finally, change LockRelation() so that
it checks for shared inval reports after obtaining the lock. In this way,
once any kind of lock has been obtained on a rel, we can trust the relcache
entry to be up-to-date.
Also, move responsibility for calling vc_abort into main xact.c list of
things-to-call-at-abort. What in the world was it doing down inside of
TransactionIdAbort()?
care of equal-key cases, eliminating bt_firsteq(). The linear search
formerly done by bt_firsteq() took a lot of time in the case where many
equal keys appear on the same page.
this one could be useful for people experiencing out-of-memory crashes while
executing queries which retrieve or use a very large number of tuples.
The problem happens when storage is allocated for functions results used in
a large query, for example:
select upper(name) from big_table;
select big_table.array[1] from big_table;
select count(upper(name)) from big_table;
This patch is a dirty hack that fixes the out-of-memory problem for the most
common cases, like the above ones. It is not the final solution for the
problem but it can work for some people, so I'm posting it.
The patch should be safe because all changes are under #ifdef. Furthermore
the feature can be enabled or disabled at runtime by the `free_tuple_memory'
options in the pg_options file. The option is disabled by default and must
be explicitly enabled at runtime to have any effect.
To enable the patch add the follwing line to Makefile.custom:
CUSTOM_COPT += -DFREE_TUPLE_MEMORY
To enable the option at runtime add the following line to pg_option:
free_tuple_memory=1
Massimo
and possibly for other cases too:
DO NOT cache status of transaction in unknown state
(i.e. non-committed and non-aborted ones)
Example:
T1 reads row updated/inserted by running T2 and cache T2 status.
T2 commits.
Now T1 reads a row updated by T2 and with HEAP_XMAX_COMMITTED
in t_infomask (so cached T2 status is not changed).
Now T1 EvalPlanQual gets updated row version without HEAP_XMIN_COMMITTED
-> TransactionIdDidCommit(t_xmin) and TransactionIdDidAbort(t_xmin)
return FALSE and T2 decides that t_xmin is not committed and gets
ERROR above.
It's too late to find more smart way to handle such cases and so
I just changed xact status caching and got rid TransactionIdFlushCache()
from code.
Changed: transam.c, xact.c, lmgr.c and transam.h - last three
just because of TransactionIdFlushCache() is removed.
2. heapam.c:
T1 marked a row for update. T2 waits for T1 commit/abort.
T1 commits. T3 updates the row before T2 locks row page.
Now T2 sees that new row t_xmax is different from xact id (T1)
T2 was waiting for. Old code did Assert here. New one goes to
HeapTupleSatisfiesUpdate. Obvious changes too.
3. Added Assert to vacuum.c
4. bufmgr.c: break
Assert(buf->r_locks == 0 && !buf->ri_lock)
into two Asserts.
2. varsup.c:ReadNewTransactionId(): don't read nextXid from disk -
this func doesn't allocate next xid, so ShmemVariableCache->nextXid
may be used (but GetNewTransactionId() must be called first).
3. vacuum.c: change elog(ERROR, "Child item....") to elog(NOTICE) -
this is not ERROR, proper handling is just not implemented, yet.
4. s_lock.c: increase S_MAX_BUSY by 2 times.
5. shmem.c:GetSnapshotData(): have to call ReadNewTransactionId()
_after_ SpinAcquire(ShmemIndexLock).
transactions will not assume that MyProc transaction was committed
before snapshot calculations. With old MyProc->xid assignment
(in xact.c:StartTransaction()) there was ability to see the same
row twice (I used gdb for this)!...
2. Assignments of InvalidTransactionId to MyProc->xid and MyProc->xmin
are moved from xact.c:CommitTransaction() to
xact.c:RecordTransactionCommit() - this invalidation must be done
before releasing transaction locks or bad (too high) XmaxRecent value
might be used by vacuum ("ERROR: Child itemid marked as unused"
reported by "Hiroshi Inoue" <Inoue@tpf.co.jp>; once again, gdb
allowed me reproduce this error).
files to be closed automatically at transaction abort or commit, should
they still be open. Also close any still-open stdio files allocated with
AllocateFile at abort/commit. This should eliminate problems with leakage
of file descriptors after an error. Also, put in some primitive buffered-IO
support so that psort.c can use virtual files without severe performance
penalties.
Vadim B. Mikheev
Tom Lane
Jan Wieck
Bruce Momjian
Tatsuo Ishii