We need to create the pg_multixact/offsets file deleted by pg_upgrade
much earlier than we originally were: it was in TrimMultiXact(), which
runs after we exit recovery, but it actually needs to run earlier than
the first call to SetMultiXactIdLimit (before recovery), because that
routine already wants to read the first offset segment.
Per pg_upgrade trouble report from Jeff Janes.
While at it, silence a compiler warning about a pointless assert that an
unsigned variable was being tested non-negative. This was a signed
constant in Thomas Munro's patch which I changed to unsigned before
commit. Pointed out by Andres Freund.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
Multixact member files are subject to early wraparound overflow and
removal: if the average multixact size is above a certain threshold (see
note below) the protections against offset overflow are not enough:
during multixact truncation at checkpoint time, some
pg_multixact/members files would be removed because the server considers
them to be old and not needed anymore. This leads to loss of files that
are critical to interpret existing tuples's Xmax values.
To protect against this, since we don't have enough info in pg_control
and we can't modify it in old branches, we maintain shared memory state
about the oldest value that we need to keep; we use this during new
multixact creation to abort if an old still-needed file would get
overwritten. This value is kept up to date by checkpoints, which makes
it not completely accurate but should be good enough. We start emitting
warnings sometime earlier, so that the eventual multixact-shutdown
doesn't take DBAs completely by surprise (more precisely: once 20
members SLRU segments are remaining before shutdown.)
On troublesome average multixact size: The threshold size depends on the
multixact freeze parameters. The oldest age is related to the greater of
multixact_freeze_table_age and multixact_freeze_min_age: anything
older than that should be removed promptly by autovacuum. If autovacuum
is keeping up with multixact freezing, the troublesome multixact average
size is
(2^32-1) / Max(freeze table age, freeze min age)
or around 28 members per multixact. Having an average multixact size
larger than that will eventually cause new multixact data to overwrite
the data area for older multixacts. (If autovacuum is not able to keep
up, or there are errors in vacuuming, the actual maximum is
multixact_freeeze_max_age instead, at which point multixact generation
is stopped completely. The default value for this limit is 400 million,
which means that the multixact size that would cause trouble is about 10
members).
Initial bug report by Timothy Garnett, bug #12990
Backpatch to 9.3, where the problem was introduced.
Authors: Álvaro Herrera, Thomas Munro
Reviews: Thomas Munro, Amit Kapila, Robert Haas, Kevin Grittner
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
After the WAL format changes, the calculation of the size of a checkpoint
record became incorrect. Instead of trying to fix the math, check that the
previous record, i.e. the xl_prev value that we'd write for the next
record, matches the last checkpoint's redo pointer. That way it's not
dependent on the size of the checkpoint record at all.
The old logic was actually slightly wrong all along: if the previous
checkpoint record crossed a page boundary, the page headers threw off the
record size calculation, and the checkpoint was not skipped. The new
checkpoint would not cross a page boundary, so this only resulted in at
most one extra checkpoint after the system became idle. The new logic fixes
that. (It's not worth fixing in backbranches).
However, it makes some sense to try to keep the latest checkpoint contained
fully in a page, or at least in a single WAL segment, just on general
robustness grounds. If something goes awfully wrong, it's more likely that
you can recover the latest WAL segment, than the last two WAL segments. So
I added an extra check that the checkpoint is not skipped if the previous
checkpoint crossed a WAL segment.
Reported by Jeff Janes.
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
Commit ed9cc2b5df made it unnecessary to pass
start_nblkno to _hash_splitbucket(), and for that matter unnecessary to
have the internal nblkno variable either. My compiler didn't complain
about that, but some did. I also rearranged the use of oblkno a bit to
make that case more parallel.
Report and initial patch by Petr Jelinek, rearranged a bit by me.
Back-patch to all branches, like the previous patch.
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
Commit 2c03216 changed allocate_recordbuf() so that it uses a palloc to
allocate the read buffer and fails immediately when an out-of-memory error
shows up, even though its callers still expect that NULL is returned in that
case. This bug is fixed making allocate_recordbuf() use a palloc_extended
with MCXT_ALLOC_NO_OOM flag and return NULL in OOM case.
Michael Paquier
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
_hash_splitbucket() obtained the base page of the new bucket by calling
_hash_getnewbuf(), but it held no exclusive lock that would prevent some
other process from calling _hash_getnewbuf() at the same time. This is
contrary to _hash_getnewbuf()'s API spec and could in fact cause failures.
In practice, we must only call that function while holding write lock on
the hash index's metapage.
An additional problem was that we'd already modified the metapage's bucket
mapping data, meaning that failure to extend the index would leave us with
a corrupt index.
Fix both issues by moving the _hash_getnewbuf() call to just before we
modify the metapage in _hash_expandtable().
Unfortunately there's still a large problem here, which is that we could
also incur ENOSPC while trying to get an overflow page for the new bucket.
That would leave the index corrupt in a more subtle way, namely that some
index tuples that should be in the new bucket might still be in the old
one. Fixing that seems substantially more difficult; even preallocating as
many pages as we could possibly need wouldn't entirely guarantee that the
bucket split would complete successfully. So for today let's just deal
with the base case.
Per report from Antonin Houska. Back-patch to all active branches.
Previously the funcCtx was a child of the tmpCtx, but that was broken
by commit eaa5808e8e, which made
MemoryContextReset() delete, not reset, child contexts. The behavior of
having a tmpCtx reset also clear the other context seems rather dubious
anyway, so let's just disentangle them. Per report from Erik Rijkers.
In passing, fix badly-inaccurate comments about these contexts.
We cannot use the index's tuple descriptor directly to describe the index
tuples returned in an index-only scan. That's because the index might use
a different datatype for the values stored on disk than the type originally
indexed. As long as they were both pass-by-ref, it worked, but will not work
for pass-by-value types of different sizes. I noticed this as a crash when I
started hacking a patch to add fetch methods to btree_gist.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
This adds a new GiST opclass method, 'fetch', which is used to reconstruct
the original Datum from the value stored in the index. Also, the 'canreturn'
index AM interface function gains a new 'attno' argument. That makes it
possible to use index-only scans on a multi-column index where some of the
opclasses support index-only scans but some do not.
This patch adds support in the box and point opclasses. Other opclasses
can added later as follow-on patches (btree_gist would be particularly
interesting).
Anastasia Lubennikova, with additional fixes and modifications by me.
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Even though the main benefit of the Lehman and Yao algorithm for
btrees is that no locks need be held between page reads in an
index search, we were holding a buffer pin on each leaf page after
it was read until we were ready to read the next one. The reason
was so that we could treat this as a weak lock to create an
"interlock" with vacuum's deletion of heap line pointers, even
though our README file pointed out that this was not necessary for
a scan using an MVCC snapshot.
The main goal of this patch is to reduce the blocking of vacuum
processes by in-progress btree index scans (including a cursor
which is idle), but the code rearrangement also allows for one
less buffer content lock to be taken when a forward scan steps from
one page to the next, which results in a small but consistent
performance improvement in many workloads.
This patch leaves behavior unchanged for some cases, which can be
addressed separately so that each case can be evaluated on its own
merits. These unchanged cases are when a scan uses a non-MVCC
snapshot, an index-only scan, and a scan of a btree index for which
modifications are not WAL-logged. If later patches allow all of
these cases to drop the buffer pin after reading a leaf page, then
the btree vacuum process can be simplified; it will no longer need
the "super-exclusive" lock to delete tuples from a page.
Reviewed by Heikki Linnakangas and Kyotaro Horiguchi
Recovery delays are implemented by waiting on a latch, and latches take
milliseconds as a parameter. The required amount of waiting was computed
using microsecond resolution though and the wait loop's abort condition
was checking the delay in microseconds as well. This could lead to
short spurts of busy looping when the overall wait time was below a
millisecond, but above 0 microseconds.
Instead just formulate the wait loop's abort condition in millisecond
granularity as well. Given that that's recovery_min_apply_delay
resolution, it seems harmless to not wait for less than a millisecond.
Backpatch to 9.4 where recovery_min_apply_delay was introduced.
Discussion: 20150323141819.GH26995@alap3.anarazel.de
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: 20150220152150.GD4149@awork2.anarazel.de,
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
The new recovery_target_action (introduced in aedccb1f6/b8e33a85d4)
replaces it's functionality. Having both seems likely to cause more
confusion than it saves worry due to the incompatibility.
Discussion: 5484FC53.2060903@2ndquadrant.com
Author: Petr Jelinek
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
... which is the usual convention among AMs, so that pg_filedump and
similar utilities can tell apart pages of different AMs. It was also
the intent of the original code, but I failed to realize that alignment
considerations would move the whole thing to the previous-to-last word
in the page.
The new definition of the associated macro makes surrounding code a bit
leaner, too.
Per note from Heikki at
http://www.postgresql.org/message-id/546A16EF.9070005@vmware.com
We allow this module to be turned off on restarts, so a restart time
check is enough to activate or deactivate the module; however, if there
is a standby replaying WAL emitted from a master which is restarted, but
the standby isn't, the state in the standby becomes inconsistent and can
easily be crashed.
Fix by activating and deactivating the module during WAL replay on
parameter change as well as on system start.
Problem reported by Fujii Masao in
http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com
Author: Petr Jelínek
This makes it easier to write frontend programs that needs to understand
the WAL record format of CREATE/DROP DATABASE. dbcommands.h cannot easily
be #included in a frontend program, because it pulls in other header files
that need backend stuff, but the new dbcommands_xlog.h header file has
fewer dependencies.
Up to now RecordTransactionCommit() waited for WAL to be flushed (if
synchronous_commit != off) and to be synchronously replicated (if
enabled), even if a transaction did not have a xid assigned. The primary
reason for that is that sequence's nextval() did not assign a xid, but
are worthwhile to wait for on commit.
This can be problematic because sometimes read only transactions do
write WAL, e.g. HOT page prune records. That then could lead to read only
transactions having to wait during commit. Not something people expect
in a read only transaction.
This lead to such strange symptoms as backends being seemingly stuck
during connection establishment when all synchronous replicas are
down. Especially annoying when said stuck connection is the standby
trying to reconnect to allow syncrep again...
This behavior also is involved in a rather complicated <= 9.4 bug where
the transaction started by catchup interrupt processing waited for
syncrep using latches, but didn't get the wakeup because it was already
running inside the same overloaded signal handler. Fix the issue here
doesn't properly solve that issue, merely papers over the problems. In
9.5 catchup interrupts aren't processed out of signal handlers anymore.
To fix all this, make nextval() acquire a top level xid, and only wait for
transaction commit if a transaction both acquired a xid and emitted WAL
records. If only a xid has been assigned we don't uselessly want to
wait just because of writes to temporary/unlogged tables; if only WAL
has been written we don't want to wait just because of HOT prunes.
The xid assignment in nextval() is unlikely to cause overhead in
real-world workloads. For one it only happens SEQ_LOG_VALS/32 values
anyway, for another only usage of nextval() without using the result in
an insert or similar is affected.
Discussion: 20150223165359.GF30784@awork2.anarazel.de,
369698E947874884A77849D8FE3680C2@maumau,
5CF4ABBA67674088B3941894E22A0D25@maumau
Per complaint from maumau and Thom Brown
Backpatch all the way back; 9.0 doesn't have syncrep, but it seems
better to be consistent behavior across all maintained branches.
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
The part of the comparison function that was supposed to keep heap tuples
ahead of index items was backwards. It would not lead to incorrect results,
but it is more efficient to return heap tuples first, before scanning more
index pages, when both have the same distance.
Alexander Korotkov
Fix some issues I noticed while fooling with an extension to allow an
additional kind of toast pointer. Much of this is just comment
improvement, but there are a couple of actual bugs, which might or might
not be reachable today depending on what can happen during logical
decoding. An example is that toast_flatten_tuple() failed to cover the
possibility of an indirection pointer in its input. Back-patch to 9.4
just in case that is reachable now.
In HEAD, also correct some really minor issues with recent compression
reorganization, such as dangerously underparenthesized macros.
The meta data of PGLZ symbolized by PGLZ_Header is removed, to make
the compression and decompression code independent on the backend-only
varlena facility. PGLZ_Header is being used to store some meta data
related to the data being compressed like the raw length of the uncompressed
record or some varlena-related data, making it unpluggable once PGLZ is
stored in src/common as it contains some backend-only code paths with
the management of varlena structures. The APIs of PGLZ are reworked
at the same time to do only compression and decompression of buffers
without the meta-data layer, simplifying its use for a more general usage.
On-disk format is preserved as well, so there is no incompatibility with
previous major versions of PostgreSQL for TOAST entries.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. Especially this commit is required
for upcoming WAL compression feature so that the WAL reader facility can
decompress the WAL data by using pglz_decompress.
Michael Paquier, reviewed by me.
It was getting tedious to track and release all the different things that
form a scan key. We were leaking at least the queryCategories array, and
possibly more, on a rescan. That was visible if a GIN index was used in a
nested loop join. This also protects from leaks in extractQuery method.
No backpatching, given the lack of complaints from the field. Maybe later,
after this has received more field testing.
Alvaro Herrera
Andres Freund
Heikki Linnakangas
Tom Lane
Fujii Masao
Kevin Grittner