Subtransaction locks now released en masse at main commit, rather than
repeatedly re-scanning for locks as we ascend the nested transaction tree.
Split transaction state TBLOCK_SUBEND into two states, TBLOCK_SUBCOMMIT
and TBLOCK_SUBRELEASE to allow the commit path to be optimised using
the existing code in ResourceOwnerRelease() which appears to have been
intended for this usage, judging from comments therein.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
The SSI patch inserted a call of RegisterPredicateLockingXid into
GetNewTransactionId, which was a bad idea on a couple of grounds. First,
it's not necessary to hold XidGenLock while manipulating that shared
memory, and doing so is bad because XidGenLock is a high-contention lock
that should be held for as short a time as possible. (Not to mention that
it adds an entirely unnecessary deadlock hazard, since we must take
SerializableXactHashLock as well.) Second, the specific place where it was
put was between extending CLOG and advancing nextXid, which could result in
unpleasant behavior in case of a failure there. Pull the call out to
AssignTransactionId, which is much safer and arguably better from a
modularity standpoint too.
There is more work to do to clean up the failure-before-advancing-nextXid
issue, but that is a separate change that will need to be back-patched.
So for the moment I just want to make GetNewTransactionId look the same as
it did in prior versions.
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
This case can arise if a transaction has written data, but only to
temporary tables. Loss of the commit record in case of a crash won't
matter, because the temporary tables will be lost anyway.
Reviewed by Heikki Linnakangas and Simon Riggs.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
This call was present in the aboriginal code from Berkeley, and has
never been touched; it may very well be that it was there to mask
effects of bugs in other places and it may no longer be necessary.
The removal has been foreseen in a code comment since 2007; this seems
to be a good time to test this hypothesis.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
Since the only purpose of WAL-loggin SharedInvalidationMessages is to support
Hot Standby operation, they needn't be included when wal_level < hot_standby.
Back-patch to 9.0.
Review by Heikki Linnakanagas and Fujii Masao.
Transaction aborts now record their LSN to avoid corner case
behaviour in SR/HS, hence change of name of variables and functions.
As pointed out by Fujii Masao. Cosmetic changes only.
so simply leads to data waiting in wal_buffers which then causes
later commits to potentially do emergency writes and for all forms
of replication to be potentially delayed without need or benefit.
Issue pointed out exactly by Fujii Masao, following bug report
by Robert Haas on a separate though related topic.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
where a database has a non-default tablespaceid. Pass thru MyDatabaseId
and MyDatabaseTableSpace to allow file path to be re-created in
standby and correct invalidation to take place in all cases.
Update and rework xact_commit_desc() debug messages.
Bug report from Tom by code inspection. Fix by me.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
AbortTransaction or AbortSubTransaction, when trying to clean up after an
error that prevented (sub)transaction start from completing:
* access to TopTransactionResourceOwner that might not exist
* assert failure in AtEOXact_GUC, if AtStart_GUC not called yet
* assert failure or core dump in AfterTriggerEndSubXact, if
AfterTriggerBeginSubXact not called yet
Per testing by injecting elog(ERROR) at successive steps in StartTransaction
and StartSubTransaction. It's not clear whether all of these cases could
really occur in the field, but at least one of them is easily exposed by
simple stress testing, as per my accidental discovery yesterday.
Conflict reason is passed through directly to the backend, so we can
take decisions about the effect of the conflict based upon the local
state. No specific changes, as yet, though this prepares for later work.
CancelVirtualTransaction() sends signals while holding ProcArrayLock.
Introduce errdetail_abort() to give message detail explaining that the
abort was caused by conflict processing. Remove CONFLICT_MODE states
in favour of using PROCSIG_RECOVERY_CONFLICT states directly, for clarity.
deletion, so that we attempt to unlink the correct filepath. unlink()
errors are ignorable there, so lack of a DatabasePath initialization step
did not cause visible problems until a related bug showed up on Solaris.
Code refactored from xact_redo_commit() to
ProcessCommittedInvalidationMessages() in inval.c. Recovery may replay
shared invalidation messages for many databases, so we cannot
SetDatabasePath() once as we do in normal backends. Read the databaseid
from the shared invalidation messages, then set DatabasePath
temporarily before calling RelationCacheInitFileInvalidate().
Problem report by Robert Treat, analysis and fix by me.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
be part of multixacts, so allocate a slot for each prepared transaction in
the "oldest member" array in multixact.c. On PREPARE TRANSACTION, transfer
the oldest member value from the current backends slot to the prepared xact
slot. Also save and recover the value from the 2pc state file.
The symptom of the bug was that after a transaction prepared, a shared lock
still held by the prepared transaction was sometimes ignored by other
transactions.
Fix back to 8.1, where both 2PC and multixact were introduced.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
redirecting libxml's allocations into a Postgres context. Instead, just let
it use malloc directly, and add PG_TRY blocks as needed to be sure we release
libxml data structures in error recovery code paths. This is ugly but seems
much more likely to play nicely with third-party uses of libxml, as seen in
recent trouble reports about using Perl XML facilities in pl/perl and bug
#4774 about contrib/xml2.
I left the code for allocation redirection in place, but it's only
built/used if you #define USE_LIBXMLCONTEXT. This is because I found it
useful to corral libxml's allocations in a palloc context when hunting
for libxml memory leaks, and we're surely going to have more of those
in the future with this type of approach. But we don't want it turned on
in a normal build because it breaks exactly what we need to fix.
I have not re-indented most of the code sections that are now wrapped
by PG_TRY(); that's for ease of review. pg_indent will fix it.
This is a pre-existing bug in 8.3, but I don't dare back-patch this change
until it's gotten a reasonable amount of field testing.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
non-writable large objects need to have their snapshots registered on the
transaction resowner, not the current portal's, because it must persist until
the large object is closed (which the portal does not). Also, ensure that the
serializable snapshot is recorded by the transaction resource owner too, even
when a subtransaction has changed the current resource owner before
serializable is taken.
Per bug reports from Pavan Deolasee.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
"base/11517/3767_fsm", instead of symbolic names like "1663/11517/3767/1",
per Alvaro's suggestion. I didn't change the messages in the higher-level
index, heap and FSM routines, though, where the fork is implicit.
This patch eliminates the marking of subtransactions as SUBCOMMITTED in pg_clog
during their commit; instead they remain in-progress until main transaction
commit. At main transaction commit, the commit protocol is atomic-by-page
instead of one transaction at a time. To avoid a race condition with some
subtransactions appearing committed before others in the case where they span
more than one pg_clog page, we conserve the logic that marks them subcommitted
before marking the parent committed.
Simon Riggs with minor help from me
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
linear search when checking child-transaction XIDs. This makes for an
important speedup in transactions that have large numbers of children,
as in a recent example from Craig Ringer. We can also get rid of an
ugly kluge that represented lists of TransactionIds as lists of OIDs.
Heikki Linnakangas
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
which is the only state in which it's safe to initiate database queries.
It turns out that all but two of the callers thought that's what it meant;
and the other two were using it as a proxy for "will GetTopTransactionId()
return a nonzero XID"? Since it was in fact an unreliable guide to that,
make those two just invoke GetTopTransactionId() always, then deal with a
zero result if they get one.
fail when used in a deferred trigger. Bug goes back to 8.0; no doubt the
reason it hadn't been noticed is that we've been discouraging use of
user-defined constraint triggers. Per report from Frank van Vugt.
and aborted transactions have different effects; also teach it not to assume
that prepared transactions are always committed.
Along the way, simplify the pgstats API by tying counting directly to
Relations; I cannot detect any redeeming social value in having stats
pointers in HeapScanDesc and IndexScanDesc structures. And fix a few
corner cases in which counts might be missed because the relation's
pgstat_info pointer hadn't been set.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
are in their commit critical sections via flags in the ProcArray. Checkpoint
can watch the ProcArray to determine when it's safe to proceed. This is
a considerably better solution to the original problem of race conditions
between checkpoint and transaction commit: it speeds up commit, since there's
one less lock to fool with, and it prevents the problem of checkpoint being
delayed indefinitely when there's a constant flow of commits. Heikki, with
some kibitzing from Tom.
of a multi-statement simple-Query message. This bug goes all the way
back, but unfortunately is not nearly so easy to fix in existing releases;
it is only the recent ProcessUtility API change that makes it fixable in
HEAD. Per report from William Garrison.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
AbortTransaction, which would lead to recursion and eventual PANIC exit
as illustrated in recent report from Jeff Davis. First, in xact.c create
a special dedicated memory context for AbortTransaction to run in. This
solves the problem as long as AbortTransaction doesn't need more than 32K
(or whatever other size we create the context with). But in corner cases
it might. Second, in trigger.c arrange to keep pending after-trigger event
records in separate contexts that can be freed near the beginning of
AbortTransaction, rather than having them persist until CleanupTransaction
as before. Third, in portalmem.c arrange to free executor state data
earlier as well. These two changes should result in backing off the
out-of-memory condition before AbortTransaction needs any significant
amount of memory, at least in typical cases such as memory overrun due
to too many trigger events or too big an executor hash table. And all
the same for subtransaction abort too, of course.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
vacuums. This allows a OLTP-like system with big tables to continue
regular vacuuming on small-but-frequently-updated tables while the
big tables are being vacuumed.
Original patch from Hannu Krossing, rewritten by Tom Lane and updated
by me.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
Simon Riggs
Tom Lane
Bruce Momjian
Robert Haas
Heikki Linnakangas
Alvaro Herrera
Magnus Hagander
Peter Eisentraut
Neil Conway