syntax for database connection parameters. It has been inside an
#ifdef NOT_USED block since 2001 or so and is marked as "broken", so
I don't think it is likely to be rehabilitated any time soon.
patch adds missing checks to the call sites of malloc(), strdup(),
PQmakeEmptyPGresult(), pqResultAlloc(), and pqResultStrdup(), and updates
the documentation. Per original report from Volkan Yazici about
PQmakeEmptyPGresult() not checking for malloc() failure.
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
request packet, use pqReadData(). This has the same effect since
conn->ssl isn't set yet and we aren't expecting more than one byte.
The advantage is that we will correctly detect loss-of-connection
instead of going into an infinite loop. Per report from Hannu Krosing.
discussion on pgsql-hackers-win32 list. Documentation still needs to
be tweaked --- I'm not sure how to refer to the APPDATA folder in
user documentation.
consistent. On Unix we now always consult getpwuid(); $HOME isn't used
at all. On Windows the code currently consults $USERPROFILE, or $HOME
if that's not defined, but I expect this will change as soon as the win32
hackers come to a consensus. Nothing done yet about changing the file
names used underneath $USERPROFILE.
subroutine that can hide platform dependencies. The WIN32 path is still
a stub, but I await a fix from one of the win32 hackers.
Also clean up unnecessary #ifdef WIN32 ugliness in a couple of places.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
Use this new function in psql. Implement query cancellation in psql for
Windows. Code by Magnus Hagander, documentation and minor editorialization
by Tom Lane.
just stick a list-link into struct PGnotify instead. Result is a smaller
faster and more robust library (mainly because we reduce the number of
malloc's and free's involved in notify processing), plus less pollution
of application link-symbol namespace.
global variables are problematic on this platform. Simplest solution
seems to be to initialize pthread key variable to 0. Also, rename this
variable and check_sigpipe_handler to something involving "pq" to
avoid gratuitous pollution of application namespace.
> user must initialize the lock. The problem are concurrent "first" users
> - the pthread_mutex_t initialization must be synchronized.
> The current implementation is broken, the attached patches fixes that:
> mutex_initlock is a spinlock. If the pthread_mutex_t mutex is not
> initialized, then the spinlock is acquired, if the pthread_mutex_t is
> initialized if it's not yet initialized and then the spinlock is dropped.
Manfred Spraul
user must initialize the lock. The problem are concurrent "first" users
- the pthread_mutex_t initialization must be synchronized.
The current implementation is broken, the attached patches fixes that:
mutex_initlock is a spinlock. If the pthread_mutex_t mutex is not
initialized, then the spinlock is acquired, if the pthread_mutex_t is
initialized if it's not yet initialized and then the spinlock is
dropped.
Manfred Spraul
extensive change then what was suggested. I found the file path.c that
contained a lot of "Unix/Windows" agnostic functions so I added a function
there instead and removed the PATHSEP declaration in exec.c altogether. All
to keep things from scattering all over the code.
I also took the liberty of changing the name of the functions
"first_path_sep" and "last_path_sep". Where I come from (and I'm apparently
not alone given the former macro name PATHSEP), they should be called
"first_dir_sep" and "last_dir_sep". The new function I introduced, that
actually finds path separators, is now the "first_path_sep". The patch
contains changes on all affected places of course.
I also changed the documentation on dynamic_library_path to reflect the
chagnes.
Thomas Hallgren
environment variable processing to libpq.
The patch also adds code to our client apps so we set the environment
variable directly based on our binary location, unless it is already
set. This will allow our applications to emit proper locale messages
that are generated in libpq.
the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
several different module Makefiles with it. Also, do any adjustment
of installation paths during configure, rather than every time Makefile.global
is read.
ignore SIGPIPE from send() in libpq, but terminate on any other SIGPIPE,
unless the user installs their own signal handler.
This is a minor fix because the only time you get SIGPIPE from libpq's
send() is when the backend dies.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
processing the request; this ensures that the request won't be taken
to cancel a subsequently-issued query. Race condition originally
noted by Oliver Jowett in the context of JDBC, but libpq has it too.
completely useless error message in 'allow' case, don't retry connection
at the sendauth stage (by then the server will either let us in or not,
no point in wasting cycles on another try in the other SSL state).
psql4win32.patch - changes in the psql source code
psql-ref.patch - changes in the documentation psql-ref.sgml
(for new builtin variable WIN32_CONSOLE)
To apply them use "patch -p 1" in the root directory of the
postgres source directory.
These patches fix the following problems of psql on Win32
(all changes only have effect #ifdef WIN32):
a) Problem: Static library libpq.a did not work
Solution: Added WSAStartup() in fe-connect.c
b) Problem: Secret Password was echoed by psql
Solution: Password echoing disabled in sprompt.c
c) Problem: 8bit characters were displayed/interpreted wrong in psql
This is due to the fact that the Win32 "console" uses a
different encoding than the rest of the Windows system
Solution: Introduced a new psql variable WIN32_CONSOLE
When set with "\set WIN32_console", the function OemToChar()
is applied after reading input and CharToOem() before
displaying Output
Christoph Dalitz
modes (and replace the requiressl boolean). The four options were first
spelled out by Magnus Hagander <mha@sollentuna.net> on 2000-08-23 in email
to pgsql-hackers, archived here:
http://archives.postgresql.org/pgsql-hackers/2000-08/msg00639.php
My original less-flexible patch and the ensuing thread are archived at:
http://dbforums.com/t623845.html
Attached is a new patch, including documentation.
To sum up, there's a new client parameter "sslmode" and environment
variable "PGSSLMODE", with these options:
sslmode description
------- -----------
disable Unencrypted non-SSL only
allow Negotiate, prefer non-SSL
prefer Negotiate, prefer SSL (default)
require Require SSL
The only change to the server is a new pg_hba.conf line type,
"hostnossl", for specifying connections that are not allowed to use SSL
(for example, to prevent servers on a local network from accidentally
using SSL and wasting cycles). Thus the 3 pg_hba.conf line types are:
pg_hba.conf line types
----------------------
host applies to either SSL or regular connections
hostssl applies only to SSL connections
hostnossl applies only to regular connections
These client and server options, the postgresql.conf ssl = false option,
and finally the possibility of compiling with no SSL support at all,
make quite a range of combinations to test. I threw together a test
script to try many of them out. It's in a separate tarball with its
config files, a patch to psql so it'll announce SSL connections even in
absence of a tty, and the test output. The test is especially informative
when run on the same tty the postmaster was started on, so the FATAL:
errors during negotiation are interleaved with the psql client output.
I saw Tom write that new submissions for 7.4 have to be in before midnight
local time, and since I'm on the east coast in the US, this just makes it
in before the bell. :)
Jon Jensen
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
correctly. See following thread for more details.
Subject: [HACKERS] client_encoding directive is ignored in postgresql.conf
From: Tatsuo Ishii <t-ishii@sra.co.jp>
Date: Wed, 29 Jan 2003 22:24:04 +0900 (JST)
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
that tv_sec is signed; return a useful error message on timeout failure;
honor PGCONNECT_TIMEOUT environment variable in PQsetdbLogin; make code
obey documentation statement that timeout=0 means no timeout.
client
utilities (libpq.dll and psql.exe) for win32 (missing defines,
adjustments to
includes, pedantic casting, non-existent functions) per:
http://developer.postgresql.org/docs/postgres/install-win32.html.
It compiles cleanly under Windows 2000 using Visual Studio .net. Also
compiles clean and passes all regression tests (regular and contrib)
under Linux.
In addition to a review by the usual suspects, it would be very
desirable for someone well versed in the peculiarities of win32 to take
a look.
Joe Conway
> > > > where is the code to verify that PGPASSWORDFILE points at a
> > > > non-world-readable file? That needs to be there now, not later, or
> > > > we'll have people moaning about backward compatibility when we finally
> > > > do plug that hole.
Alvaro Herrera
PGPASSWORDFILE environment variable. I have modified libpq to make use
of this variable. I present the first cut here.
Currently the format for the file should be
host:port:database:user:password
Alvaro Herrera
.
So i took the opportunity to fix some stuff:
1. Made the thing compile (typos & needed definitions) with the new pqsecure_* s
tuff, and added fe-secure.c to the win32.mak makefile.
2. Fixed some MULTIBYTE compile errors (when building without MB support).
3. Made it do that you can build with debug info: "nmake -f win32.mak DEBUG=1".
4. Misc small compiler speedup changes.
The resulting .dll has been tested in production, and everything seems ok.
I CC:ed -hackers because i'm not sure about two things:
1. In libpq-int.h I typedef ssize_t as an int because Visual C (v6.0)
doesn't de fine ssize_t. Is that ok, or is there any standard about what
type should be use d for ssize_t?
2. To keep the .dll api consistent regarding MULTIBYTE I just return -1
in fe-connect.c:PQsetClientEncoding() instead of taking away the whole
function. I wonder if i should do any compares with the
conn->client_encoding and return 0 if not hing would have changed (if so
how do i check that?).
Regards
Magnus Naeslund
conversion procs and conversions are added in initdb. Currently
supported conversions are:
UTF-8(UNICODE) <--> SQL_ASCII, ISO-8859-1 to 16, EUC_JP, EUC_KR,
EUC_CN, EUC_TW, SJIS, BIG5, GBK, GB18030, UHC,
JOHAB, TCVN
EUC_JP <--> SJIS
EUC_TW <--> BIG5
MULE_INTERNAL <--> EUC_JP, SJIS, EUC_TW, BIG5
Note that initial contents of pg_conversion system catalog are created
in the initdb process. So doing initdb required is ideal, it's
possible to add them to your databases by hand, however. To accomplish
this:
psql -f your_postgresql_install_path/share/conversion_create.sql your_database
So I did not bump up the version in cataversion.h.
TODO:
Add more conversion procs
Add [CASCADE|RESTRICT] to DROP CONVERSION
Add tuples to pg_depend
Add regression tests
Write docs
Add SQL99 CONVERT command?
--
Tatsuo Ishii
files rather than a header file where they belong. Pay some modicum
of attention to picking global routine names that aren't likely to
conflict with surrounding applications.
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
In summary, if a software writer implements timer events or other events
which generate a signal with a timing fast enough to occur while libpq
is inside connect(), then connect returns -EINTR. The code following
the connect call does not handle this and generates an error message.
The sum result is that the pg_connect() fails. If the timer or other
event is right on the window of the connect() completion time, the
pg_connect() may appear to work sporadically. If the event is too slow,
pg_connect() will appear to always work and if the event is too fast,
pg_connect() will always fail.
David Ford
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
> It seems that win9x doesn't have the "netmsg.dll" so it defaults to "normal"
> FormatMessage.
> I wonder if one could load wsock32.dll or winsock.dll on those systems
> instead of netmsg.dll.
>
> Mikhail, could you please test this code on your nt4 system?
> Could someone else test this code on a win98/95 system?
>
> It works on win2k over here.
It works on win2k here too but not on win98/95 or winNT.
Anyway, attached is the patch which uses Magnus's my_sock_strerror
function (renamed to winsock_strerror). The only difference is that
I put the code to load and unload netmsg.dll in the libpqdll.c
(is this OK Magnus?).
Mikhail Terekhov
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
changes on this new source to make non-blocking connection work. I
tested it, and PQSendQuery and PQGetResult are working fine.
In win32.h I added one line:
#define snprintf _snprintf
Darko Prenosil
functions do not set errno, so some normal conditions are treated as
fatal errors. e.g. fetching large tuples fails, as at some point recv()
returns EWOULDBLOCK. here's a patch, which replaces errno with
WSAGetLastError(). i've tried to to affect non-win32 code.
Dmitry Yurtaev
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
If pghost == "" and pgport == "" then PQsetdbLogin() fails with a
error message:
Is the postmaster running locally
and accepting connections on Unix socket '/tmp/.s.PGSQL.0'?
I see many applications such as PHP fails due to this behavior.
Now if pgport == "", then it is assumed to be a DEF_PGPORT_STR. This
is the same behavior as the version prior 7.1.
might change it. Experimentation shows that the signal handler call
mechanism does not save/restore errno for you, at least not on Linux
or HPUX, so this is definitely a real risk.
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
I prepared and tested a patch vs. 7.0.2, and it works fine. I've added
another option which allows users to have their own service file in
~/.pg_service.conf, which might come handy sometimes.
Mario Weilguni
As a result, backend/libpq/pqcomm.c and interfaces/libpq/fe-connect.c
fail to compile.
The <netinet/tcp.h> header needs to be preceded by <netinet/in.h>, at
least on IRIX, Solaris and AIX. The simple configure test fails.
(That header on Linux is idempotent.)
The basic problem is that <netinet/tcp.h> is a BSD header. The
correct header for TCP internals such as TCP_NODELAY on a UNIX system
is <xti.h>. By UNIX I mean UNIX95 (aka XPG4v2 or SUSv1) or later.
The current UNIX standard (UNIX98 aka SUSv2) is available online at
<http://www.opengroup.org/onlinepubs/7908799/>.
The fix is to add header support for <xti.h> into configure.in and
config.h.in.
The 2 files which conditionally include <netinet/tcp.h> need also to
conditionally include <xti.h>.
Pete Forman
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
Update the installation instructions (formerly misnamed "FAQ"), add configure
checks for some headers rather than having users copy stubs manually (ugh!).
Use Autoconf check for exe extension. This also avoids inheriting the value
of $(X) from the environment.
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
Interfaced a lot of the custom tests to the config.cache, in the process
made them separate macros and grouped them out into files. Made naming
adjustments.
Removed a couple of useless/unused configure tests.
Disabled C++ by default. C++ is no more special than Perl, Python, and Tcl.
And it breaks equally often. :(
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
some platforms --- and I also see that it is documented as not thread-
safe on HPUX and possibly other platforms. No good reason not to just
use IPPROTO_TCP constant from <netinet/in.h> instead.
it in a separate object. There's no value in keeping the state separate,
and it creates dangling-pointer problems. Also, remove PQsetenv routines
from public API, until and unless they are redesigned to have a safer
interface. Since they were never part of the documented API before 7.0,
it's unlikely that anyone is calling them.
1. C++ style comments in C source for ecpg ( // comment )
2. compiler finds wrong include file extern.h in ecpg/lib/descriptor.c
from
include path instead of workdir (rename it ?)
3. fe-connect getsockopt takes a socklen_t as fifth arg not int (use
SOCKET_SIZE_TYPE instead)
4. char vs unsigned char in psql calls to libpq
5. empty define that results in an empty but terminated line ( ; )
Now for all but point 3 I can supply changes to the
compiler flags, to make the compiler less pedantic.
Or is someone interested in the complications ?
in the meantime can someone apply the attached patch ?
Andreas
array. This allows processing of conninfo strings to be made thread-safe,
at the cost of a small memory leak in applications that use
PQconndefaults() and are not updated to free the returned array via
the new PQconninfoFree() function. But PQconndefaults() is probably not
used very much, so this seems like a good compromise.
platform (psql and libpq):
The file "config.h.win32" in the include\ directory (from my patch from
2000-01-18) is missing from the tree. It needs to be put back :-)
The following patch has to be applied in the interfaces\libpq directory.
//Magnus
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
it seems more suitable for the naming convention in libpq.
New function PQsetClientEncoding added. It makes possible to change
the client encoding on the fly without setting PGCLIENTENCODING.