into nodes/nodeFuncs, so as to reduce wanton cross-subsystem #includes inside
the backend. There's probably more that should be done along this line,
but this is a start anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
Instead put in a test to drop a NULL default at the last moment before
storing the catalog entry. This changes the behavior in a couple of ways:
* Specifying DEFAULT NULL when creating an inheritance child table will
successfully suppress inheritance of any default expression from the
parent's column, where formerly it failed to do so.
* Specifying DEFAULT NULL for a column of a domain type will correctly
override any default belonging to the domain; likewise for a sub-domain.
The latter change happens because by the time the clause is checked,
it won't be a simple null Const but a CoerceToDomain expression.
Personally I think this should be back-patched, but there doesn't seem to
be consensus for that on pgsql-hackers, so refraining.
(which now deals only in optimizable statements), and put that code
into a new file parser/parse_utilcmd.c. This helps clarify and enforce
the design rule that utility statements shouldn't be processed during
the regular parse analysis phase; all interpretation of their meaning
should happen after they are given to ProcessUtility to execute.
(We need this because we don't retain any locks for a utility statement
that's in a plan cache, nor have any way to detect that it's stale.)
We are also able to simplify the API for parse_analyze() and related
routines, because they will now always return exactly one Query structure.
In passing, fix bug #3403 concerning trying to add a serial column to
an existing temp table (this is largely Heikki's work, but we needed
all that restructuring to make it safe).
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
representing externally-supplied values, since the APIs that carry such
values only specify type not typmod. However, for PARAM_SUBLINK Params
it is handy to carry the typmod of the sublink's output column. This
is a much cleaner solution for the recently reported 'could not find
pathkey item to sort' and 'failed to find unique expression in subplan
tlist' bugs than my original 8.2-compatible patch. Besides, someday we
might want to support typmods for external parameters ...
merely a matter of fixing the error check, since the underlying Portal
infrastructure already handles it. This in turn allows these statements
to be used in some existing plpgsql and plperl contexts, such as a
plpgsql FOR loop. Also, do some marginal code cleanup in places that
were being sloppy about distinguishing SELECT from SELECT INTO.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
will be expanded to a list of their member fields, rather than creating
a nested rowtype field as formerly. (The old behavior is still available
by omitting '.*'.) This syntax is not allowed by the SQL spec AFAICS,
so changing its behavior doesn't violate the spec. The new behavior is
substantially more useful since it allows, for example, triggers to check
for data changes with 'if row(new.*) is distinct from row(old.*)'. Per
my recent proposal.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
ScalarArrayOpExpr when possible, that is, whenever there is an array type
for the values of the expression list. This completes the project I've
been working on to improve the speed of index searches with long IN lists,
as per discussion back in mid-October.
I did not force initdb, but until you do one you will see failures in the
"rules" regression test, because some of the standard system views use IN
and their compiled formats have changed.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
recursed twice on its first argument, leading to exponential time spent
on a deep nest of COALESCEs ... such as a deeply nested FULL JOIN would
produce. Per report from Matt Carter.
if they are two-byte multibyte characters. Same thing can be happen
if octet_length(multibyte_chars) == n where n is char(n).
Long standing bug since 7.3 days. Per report and fix from Yoshiyuki Asaba.
Tom Lane
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
Joe Conway
Tatsuo Ishii