The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
An array-type coercion appearing within a CASE that has a constant
(after const-folding) test expression was mangled by the planner, causing
all the elements of the resulting array to be equal to the coerced value
of the CASE's test expression. This is my oversight in commit c12d570fa:
that changed ArrayCoerceExpr to use a subexpression involving a
CaseTestExpr, and I didn't notice that eval_const_expressions needed an
adjustment to keep from folding such a CaseTestExpr to a constant when
it's inside a suitable CASE.
This is another in what's getting to be a depressingly long line of bugs
associated with misidentification of the referent of a CaseTestExpr.
We're overdue to redesign that mechanism; but any such fix is unlikely
to be back-patchable into v11. As a stopgap, fix eval_const_expressions
to do what it must here. Also add a bunch of comments pointing out the
restrictions and assumptions that are needed to make this work at all.
Also fix a related oversight: contain_context_dependent_node() was not
aware of the relationship of ArrayCoerceExpr to CaseTestExpr. That was
somewhat fail-soft, in that the outcome of a wrong answer would be to
prevent optimizations that could have been made, but let's fix it while
we're at it.
Per bug #15471 from Matt Williams. Back-patch to v11 where the faulty
logic came in.
Discussion: https://postgr.es/m/15471-1117f49271989bad@postgresql.org
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
This is the last major omission in our domains feature: you can now
make a domain over anything that's not a pseudotype.
The major complication from an implementation standpoint is that places
that might be creating tuples of a domain type now need to be prepared
to apply domain_check(). It seems better that unprepared code fail
with an error like "<type> is not composite" than that it silently fail
to apply domain constraints. Therefore, relevant infrastructure like
get_func_result_type() and lookup_rowtype_tupdesc() has been adjusted
to treat domain-over-composite as a distinct case that unprepared code
won't recognize, rather than just transparently treating it the same
as plain composite. This isn't a 100% solution to the possibility of
overlooked domain checks, but it catches most places.
In passing, improve typcache.c's support for domains (it can now cache
the identity of a domain's base type), and rewrite the argument handling
logic in jsonfuncs.c's populate_record[set]_worker to reduce duplicative
per-call lookups.
I believe this is code-complete so far as the core and contrib code go.
The PLs need varying amounts of work, which will be tackled in followup
patches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
The NAMEDTUPLESTORE patch piggybacked on the infrastructure for
TABLEFUNC/VALUES/CTE RTEs, none of which can ever have dropped columns,
so the possibility was ignored most places. Fix that, including adding a
specification to parsenodes.h about what it's supposed to look like.
In passing, clean up assorted comments that hadn't been maintained
properly by said patch.
Per bug #14799 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170906120005.25630.84360@wrigleys.postgresql.org
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
Previously, we left such literals alone if the query or subquery had
no properties forcing a type decision to be made (such as an ORDER BY or
DISTINCT clause using that output column). This meant that "unknown" could
be an exposed output column type, which has never been a great idea because
it could result in strange failures later on. For example, an outer query
that tried to do any operations on an unknown-type subquery output would
generally fail with some weird error like "failed to find conversion
function from unknown to text" or "could not determine which collation to
use for string comparison". Also, if the case occurred in a CREATE VIEW's
query then the view would have an unknown-type column, causing similar
failures in queries trying to use the view.
To fix, at the tail end of parse analysis of a query, forcibly convert any
remaining "unknown" literals in its SELECT or RETURNING list to type text.
However, provide a switch to suppress that, and use it in the cases of
SELECT inside a set operation or INSERT command. In those cases we already
had type resolution rules that make use of context information from outside
the subquery proper, and we don't want to change that behavior.
Also, change creation of an unknown-type column in a relation from a
warning to a hard error. The error should be unreachable now in CREATE
VIEW or CREATE MATVIEW, but it's still possible to explicitly say "unknown"
in CREATE TABLE or CREATE (composite) TYPE. We want to forbid that because
it's nothing but a foot-gun.
This change creates a pg_upgrade failure case: a matview that contains an
unknown-type column can't be pg_upgraded, because reparsing the matview's
defining query will now decide that the column is of type text, which
doesn't match the cstring-like storage that the old materialized column
would actually have. Add a checking pass to detect that. While at it,
we can detect tables or composite types that would fail, essentially
for free. Those would fail safely anyway later on, but we might as
well fail earlier.
This patch is by me, but it owes something to previous investigations
by Rahila Syed. Also thanks to Ashutosh Bapat and Michael Paquier for
review.
Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com
Previously, the right-hand side of a multiple-column assignment, if it
wasn't a sub-SELECT, had to be a simple parenthesized expression list,
because gram.y was responsible for "bursting" the construct into
independent column assignments. This had the minor defect that you
couldn't write ROW (though you should be able to, since the standard says
this is a row constructor), and the rather larger defect that unlike other
uses of row constructors, we would not expand a "foo.*" item into multiple
columns.
Fix that by changing the RHS to be just "a_expr" in the grammar, leaving
it to transformMultiAssignRef to separate the elements of a RowExpr;
which it will do only after performing standard transformation of the
RowExpr, so that "foo.*" behaves as expected.
The key reason we didn't do that before was the hard-wired handling of
DEFAULT tokens (SetToDefault nodes). This patch deals with that issue by
allowing DEFAULT in any a_expr and having parse analysis throw an error
if SetToDefault is found in an unexpected place. That's an improvement
anyway since the error can be more specific than just "syntax error".
The SQL standard suggests that the RHS could be any a_expr yielding a
suitable row value. This patch doesn't really move the goal posts in that
respect --- you're still limited to RowExpr or a sub-SELECT --- but it does
fix the grammar restriction, so it provides some tangible progress towards
a full implementation. And the limitation is now documented by an explicit
error message rather than an unhelpful "syntax error".
Discussion: <8542.1479742008@sss.pgh.pa.us>
Because we use transformTargetList() for UPDATE as well as SELECT
tlists, the code accidentally tried to expand a "*" reference into
several columns. This is nonsensical, because the UPDATE syntax
provides exactly one target column to put the value into. The
immediate result was that transformUpdateTargetList() got confused
and reported "UPDATE target count mismatch --- internal error".
It seems better to treat such a reference as a plain whole-row
variable, as it would be in other contexts. (This could produce
useful results when the target column is of composite type.)
Fix by tweaking transformTargetList() to perform *-expansion only
conditionally, depending on its exprKind parameter.
Back-patch to 9.3. The problem exists further back, but a fix would be
much more invasive before that, because transformTargetList() wasn't
told what kind of list it was working on. Doesn't seem worth the
trouble given the lack of field reports. (I only noticed it because
I was checking the code while trying to improve the documentation about
how we handle "foo.*".)
Discussion: <4308.1479595330@sss.pgh.pa.us>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
The previous coding labeled expressions such as pg_index.indkey[1:3] as
being of int2vector type; which is not right because the subscript bounds
of such a result don't, in general, satisfy the restrictions of int2vector.
To fix, implicitly promote the result of slicing int2vector to int2[],
or oidvector to oid[]. This is similar to what we've done with domains
over arrays, which is a good analogy because these types are very much
like restricted domains of the corresponding regular-array types.
A side-effect is that we now also forbid array-element updates on such
columns, eg while "update pg_index set indkey[4] = 42" would have worked
before if you were superuser (and corrupted your catalogs irretrievably,
no doubt) it's now disallowed. This seems like a good thing since, again,
some choices of subscripting would've led to results not satisfying the
restrictions of int2vector. The case of an array-slice update was
rejected before, though with a different error message than you get now.
We could make these cases work in future if we added a cast from int2[]
to int2vector (with a cast function checking the subscript restrictions)
but it seems unlikely that there's any value in that.
Per report from Ronan Dunklau. Back-patch to all supported branches
because of the crash risks involved.
It's possible to drop a column from an input table of a JOIN clause in a
view, if that column is nowhere actually referenced in the view. But it
will still be there in the JOIN clause's joinaliasvars list. We used to
replace such entries with NULL Const nodes, which is handy for generation
of RowExpr expansion of a whole-row reference to the view. The trouble
with that is that it can't be distinguished from the situation after
subquery pull-up of a constant subquery output expression below the JOIN.
Instead, replace such joinaliasvars with null pointers (empty expression
trees), which can't be confused with pulled-up expressions. expandRTE()
still emits the old convention, though, for convenience of RowExpr
generation and to reduce the risk of breaking extension code.
In HEAD and 9.3, this patch also fixes a problem with some new code in
ruleutils.c that was failing to cope with implicitly-casted joinaliasvars
entries, as per recent report from Feike Steenbergen. That oversight was
because of an inadequate description of the data structure in parsenodes.h,
which I've now corrected. There were some pre-existing oversights of the
same ilk elsewhere, which I believe are now all fixed.
Formerly we relied on checking after-the-fact to see if an expression
contained aggregates, window functions, or sub-selects when it shouldn't.
This is grotty, easily forgotten (indeed, we had forgotten to teach
DefineIndex about rejecting window functions), and none too efficient
since it requires extra traversals of the parse tree. To improve matters,
define an enum type that classifies all SQL sub-expressions, store it in
ParseState to show what kind of expression we are currently parsing, and
make transformAggregateCall, transformWindowFuncCall, and transformSubLink
check the expression type and throw error if the type indicates the
construct is disallowed. This allows removal of a large number of ad-hoc
checks scattered around the code base. The enum type is sufficiently
fine-grained that we can still produce error messages of at least the
same specificity as before.
Bringing these error checks together revealed that we'd been none too
consistent about phrasing of the error messages, so standardize the wording
a bit.
Also, rewrite checking of aggregate arguments so that it requires only one
traversal of the arguments, rather than up to three as before.
In passing, clean up some more comments left over from add_missing_from
support, and annotate some tests that I think are dead code now that that's
gone. (I didn't risk actually removing said dead code, though.)
Now that we are storing structs in these lists, the distinction between
the two lists can be represented with a couple of extra flags while using
only a single list. This simplifies the code and should save a little
bit of palloc traffic, since the majority of RTEs are represented in both
lists anyway.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select. Previously, you usually got "?column?" in such cases.
Marti Raudsepp, reviewed by Kyotaro Horiugchi
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
Michael Paquier
Tom Lane
Alvaro Herrera
Bruce Momjian
Andres Freund
Teodor Sigaev
Peter Eisentraut
Kevin Grittner
Robert Haas