Subject: [HACKERS] More patches for date/time
I have accumulated several patches to add functionality to the datetime
and timespan data types as well as to fix reported porting bugs on non-BSD
machines. These patches are:
dt.c.patch - add datetime_part(), fix bugs
dt.h.patch - add quarter and timezone support, add prototypes
globals.c.patch - add time and timezone variables
miscadmin.h.patch - add time and timezone variables
nabstime.c.patch - add datetime conversion routine
nabstime.h.patch - add prototypes
pg_operator.h.patch - add datetime operators, clean up formatting
pg_proc.h.patch - add datetime functions, reassign conflicting date OIDs
pg_type.h.patch - add datetime and timespan data types
The dt.c and pg_proc.h patches are fairly large; the latter mostly because I tried
to get some columns for existing entries to line up.
Subject: [HACKERS] libpq/pqcomm stuff and Solaris byte order
I decided to go ahead with the required changes since no one else seems
to. I don't guarantee that it is perfect but with these changes the
package actually compiles. While I was at it I added to the Sparc
Solaris header to define the byte order. Note that NetBSD sets this
in the system headers so it wasn't required there.
In particular, someone may want to check whether I removed the correct
84 lines from backend/libpq/pqcomprim.c.
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] Patch for io routines
I am currently trying to improve on the front-backend communication
routines; and noticed that lots of code are duplicated for libpq and
the backend. This is a first patch that tries to share code between
the two, more to follow.
mjl
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
Subject: [HACKERS] linux/alpha patches
These patches lay the groundwork for a Linux/Alpha port. The port doesn't
actually work unless you tweak the linker to put all the pointers in the
first 32 bits of the address space, but it's at least a start. It
implements the test-and-set instruction in Alpha assembly, and also fixes
a lot of pointer-to-integer conversions, which is probably good anyway.
Subject: [HACKERS] better access control error messages
This patch replaces the 'no such class or insufficient privilege' with
distinct error messages that tell you whether the table really doesn't
exist or whether access was denied.
The following patches add to the backend a new debugging flag -K which prints
a debug trace of all locking operations on user relations (those with oid
greater than 20000). The code is compiled only if LOCK_MGR_DEBUG is defined,
so the patch should be harmless if not explicitly enabled.
I'm using the code to trace deadlock conditions caused by application queries
using the command "$POSTMASTER -D $PGDATA -o '-d 1 -K 1'.
The patches are for version 6.0 dated 970126.
Patches from: aoki@CS.Berkeley.EDU (Paul M. Aoki)
i gave jolly my btree bulkload code a long, long time ago but never
gave him a bunch of my bugfixes. here's a diff against the 6.0
baseline.
for some reason, this code has slowed down somewhat relative to the
insertion-build code on very small tables. don't know why -- it used
to be within about 10%. anyway, here are some (highly unscientific!)
timings on a dec 3000/300 for synthetic tables with 10k, 100k and
1000k tuples (basically, 1mb, 10mb and 100mb heaps). 'c' means
clustered (pre-sorted) inputs and 'u' means unclustered (randomly
ordered) inputs. the 10k table basically fits in the buffer pool, but
the 100k and 1000k tables don't. as you can see, insertion build is
fine if you've sorted your heaps on your index key or if your heap
fits in core, but is absolutely horrible on unordered data (yes,
that's 7.5 hours to index 100mb of data...) because of the zillions of
random i/os.
if it doesn't work for you for whatever reason, you can always turn it
back off by flipping the FastBuild flag in nbtree.c. i don't have
time to maintain it.
good luck!
baseline code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 8.6
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 9.1
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.2
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 652.4
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.1
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 26772.9
bulkloading code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 11.3
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 10.4
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.5
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 63.5
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.9
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 701.0
Essentially, config.h now includes an 'os.h', which is created via
configure by linking a "port.h" file from the port directory to the
include directory.
Going to try to merge backend/port in similar ways
#if defined(aix)
#define TERMIOS_H_LOCATION <termios.h>
#else
#define TERMIOS_H_LOCATION <sys/termios.h>
#endif
libpq/fe-exec.c modified so that location of termios.h is determined
by whether HAVE_TERMIOS_H is defined or not, in preparation for switch
to configure
/usr/include/limits.h (which quiets the costsize.c warnings)...under
FreeBSD, /usr/include/limits.h *includes* machine/limits.h, while under
Solaris, there is no such things as /usr/include/machine...
Problem with Solaris pointed out by Mark Wahl
At least the first two should be fixed before the final release of 6.0.
1) There is a mismatch between the type declared in the catalog for
the input/output attributes of pg_type and the actual type of
values stored in the table. The type of typinput, typoutput,
typsend and typreceive are declared oid (26) while the values are
regproc (24). The error was there also in previous versions but
nobody noticed it until an Assert has been added in ExecEvalVar.
The effect is that it is now impossible to replace the typoutput
of existing data types with new procs.
2) The identd hba fails after the first time because the data read
from the identd socket is not zero-terminated and strlen reports
an incorrect length if the stack contains garbage, which usually
happens after the first connection has been made.
3) The new initdb wants to create itself the data directory. This
implies that the parent directory must be writable by postgres and
this may not always be desirable. A better solution would be to
allow the directory to be created by root and then filled by initdb.
It would also nice to have some reasonable default for PGLIB and
PGDATA like the previous version did. This applies also to the
postmaster executable.
gmake of the code without interruption.
There's also some tidy-up of the MAXPATHLEN stuff based on the assumption that
all supported platforms have MAXPATHLEN defined in <sys/param.h>.
(The only unknowns for the above are AIX and IRIX5.)
as ints and longs. Touches on quite a few function args as
well. Most other files look ok as far as Oids go...still checking
though...
Since Oids are type'd as unsigned ints, they should prolly be used
with the %ud format string in elog and sprintf messages. Not sure
what kind of strangeness that could produce.
Darren King
* Wrote max(date) and min(date) aggregates
* Wrote operator "-" for date; date - date yields number of days
difference
* Wrote operator+(date,int) and operator-(date,int); the int is the
number of days. Each operator returns a new date.
By: Tom Tromey <tromey@creche.cygnus.com>
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
>From the create_aggregate man page...
"The arguments to state-transition-function-1 must be
(stype1,basetype), and its return value must be stype1."
create aggregate MIN (sfunc1 = int2smaller,
basetype = int2,
stype1 = int2);
will fail becase int2smaller and int2larger are in pg_proc
as returning an int4. Can't happen since both args have to
be int2.
From: Darren King <aixssd!ceodev!darrenk@abs.net>
I'm able to get through a 'make' of the backend with no errors except
the occasional 'might not be initialized error', which is nothing major,
just annoying.
Have a few patches from D'Arcy to incorporate, but am waiting until I can
get a clean compile first, which I'm hoping to have before bed, or sometime
tomorrow.
Note. all include files that have been hit so far have had extraneous
include files cleaned out and are reduced to...the lowest common
"include file", based on 'cc -Wall -I. test.c', where test.c is:
#include "postgres.h"
#include "<top of branches>" (ie. top of branches this time was utils/fcache2.h)
*should* be intelligent enough that:
#if defined(__FreeBSD__) works, where __FreeBSD__ is actually defined
by the compiler itself.
Makefile.global used to have -DPORTNAME_<port> -D<port> as part of the flags
for gcc while all occurances of PORTNAME_<port> slowly get removed from
the source tree...
cache. I found if I manually added a line to flush the whole relation
cache, the assert error disappeared. Looking through the code, I found
that the relation cache is flushed at the end of each query if the
reference count is zero for the relation. However, printf's showed that
the rd_relcnt(reference count) for the accessed query was not returning
to zero after each query.
It turns out the parser was doing a heap_ropen in parser/analyze.c to
get information about the table's columns, but was not doing a
heap_close.
This was causing the query after the ALTER TABLE ADD to see the old
table structure, and the executor's assert was reporting the problem.
NAMEDATALEN
OIDDATALEN
EUROPEAN_DATES
HBA
DEADLOCK_TIMEOUT
OPENLINK_PATCHES
NULL_PATCH
ARRAY_PATCH
Attempting to document and centralize as many of the "defines" as possible...
kinda useless to have defines if nobody knows they exist, eh?
|
|Here's a patch for Version 2 only. It just adds an Assert to catch some
|inconsistencies in the catalog classes.
|
|--
|Bryan Henderson Phone 408-227-6803
|San Jose, California
|