This code is unsafe, as proven by buildfarm failures, because it tries
to access shared memory that might already be gone. It's also unnecessary,
because we're about to exit the process anyway and so the record type cache
should never be accessed again. The idea was to lay some foundations for
someday recycling workers --- which would require attaching to a different
shared tupdesc registry --- but that will require considerably more
thought. In the meantime let's save some bytes by just removing the
nonfunctional code.
Problem identification, and proposal to fix by removing functionality
from the detach function, by Thomas Munro. I went a bit further by
removing the function altogether.
Discussion: https://postgr.es/m/E1dsguX-00056N-9x@gemulon.postgresql.org
Tuples can have type RECORDOID and a typmod number that identifies a blessed
TupleDesc in a backend-private cache. To support the sharing of such tuples
through shared memory and temporary files, provide a typmod registry in
shared memory.
To achieve that, introduce per-session DSM segments, created on demand when a
backend first runs a parallel query. The per-session DSM segment has a
table-of-contents just like the per-query DSM segment, and initially the
contents are a shared record typmod registry and a DSA area to provide the
space it needs to grow.
State relating to the current session is accessed via a Session object
reached through global variable CurrentSession that may require significant
redesign further down the road as we figure out what else needs to be shared
or remodelled.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
The ISN_DEBUG code did not compile. Fix that code, don't hide it behind
an #ifdef, make it run when building with asserts, and make it error out
instead of just logging if it fails.
Reviewed-by: David Steele <david@pgmasters.net>
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
Flattening the partitioning hierarchy at this stage makes various
desirable optimizations difficult. The original use case for this
patch was partition-wise join, which wants to match up the partitions
in one partitioning hierarchy with those in another such hierarchy.
However, it now seems that it will also be useful in making partition
pruning work using the PartitionDesc rather than constraint exclusion,
because with a flattened expansion, we have no easy way to figure out
which PartitionDescs apply to which leaf tables in a multi-level
partition hierarchy.
As it turns out, we end up creating both rte->inh and !rte->inh RTEs
for each intermediate partitioned table, just as we previously did for
the root table. This seems unnecessary since the partitioned tables
have no storage and are not scanned. We might want to go back and
rejigger things so that no partitioned tables (including the parent)
need !rte->inh RTEs, but that seems to require some adjustments not
related to the core purpose of this patch.
Ashutosh Bapat, reviewed by me and by Amit Langote. Some final
adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRd=1venqLL7oGU=C1dEkuvk2DJgvF+7uKbnPHaum1mvHQ@mail.gmail.com
It's not necessary for such a small program, and it causes unnecessary
extra work to get the correct definition of bool, more so if we are
going to introduce stdbool.h later.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
With this change, the order of leaf partitions as returned by
RelationGetPartitionDispatchInfo should now be the same as the
order used by expand_inherited_rtentry. This will make it simpler
for future patches to match up the partition dispatch information
with the planner data structures. The new code is also, in my
opinion anyway, simpler and easier to understand.
Amit Langote, reviewed by Amit Khandekar. I also reviewed and
made a few cosmetic revisions.
Discussion: http://postgr.es/m/d98d4761-5071-1762-501e-0e15047c714b@lab.ntt.co.jp
Using ++ on a bool variable doesn't work well when stdbool.h is in use.
The original BSD code appears to use int here, so use that instead.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
During the development of d47cfef711 the CFI()s in ExecScan() were
moved back and forth, ending up in the wrong place. Thus queries that
largely spend their time in ExecScan(), and have neither projection
nor a qual, can't be cancelled in a timely manner.
Reported-By: Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/CAMkU=1weDXp8eLLPt9SO1LEUsJYYK9cScaGhLKpuN+WbYo9b5g@mail.gmail.com
Backpatch: 10, as d47cfef711
The order in which GRANTs are output is important as GRANTs which have
been GRANT'd by individuals via WITH GRANT OPTION GRANTs have to come
after the GRANT which included the WITH GRANT OPTION. This happens
naturally in the backend during normal operation as we only change
existing ACLs in-place, only add new ACLs to the end, and when removing
an ACL we remove any which depend on it also.
Also, adjust the comments in acl.h to make this clear.
Unfortunately, the updates to pg_dump to handle initial privileges
involved pulling apart ACLs and then combining them back together and
could end up putting them back together in an invalid order, leading to
dumps which wouldn't restore.
Fix this by adjusting the queries used by pg_dump to ensure that the
ACLs are rebuilt in the same order in which they were originally.
Back-patch to 9.6 where the changes for initial privileges were done.
Test queries added by commit 69835bc89 are giving unexpected results
on some smaller buildfarm critters. I think probably the seqscan
logic is kicking in to cause the scans to not start at the beginning
of the table. Add ORDER BY to make them be indexscans instead.
Per buildfarm member chipmunk.
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
The documentation claimed that one should send
"pg_same_as_startup_message" as the user name in the SCRAM messages, but
this did not match the actual implementation, so remove it.
This makes it clear that pg_upgrade standby upgrade instructions should
only be used in link mode, adds examples, and explains how rsync works
with links.
Reported-by: Andreas Joseph Krogh
Discussion: https://postgr.es/m/VisenaEmail.6c.c0e592c5af4ef0a2.15e785dcb61@tc7-visena
Backpatch-through: 9.5
The previous error message when attempting to run a general SQL command
in a physical replication WAL sender was a bit sloppy.
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Commit 83aaac41c6 introduced the use of
LDAP_NO_ATTRS to avoid requesting a dummy attribute when doing search+bind
LDAP authentication. It turns out that not all LDAP implementations define
that macro, but its value is fixed by the protocol so we can define it
ourselves if it's missing.
Author: Thomas Munro
Reported-By: Ashutosh Sharma
Discussion: https://postgr.es/m/CAE9k0Pm6FKCfPCiAr26-L_SMGOA7dT_k0%2B3pEbB8%2B-oT39xRpw%40mail.gmail.com
This patch adds ERROR, SQLSTATE, and ROW_COUNT, which are updated after
every query, as well as LAST_ERROR_MESSAGE and LAST_ERROR_SQLSTATE,
which are updated only when a query fails. The expected usage of these
is for scripting.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704042158020.12290@lancre
Before, only filters of the form "(<ldapsearchattribute>=<user>)"
could be used to search an LDAP server. Introduce ldapsearchfilter
so that more general filters can be configured using patterns, like
"(|(uid=$username)(mail=$username))" and "(&(uid=$username)
(objectClass=posixAccount))". Also allow search filters to be included
in an LDAP URL.
Author: Thomas Munro
Reviewed-By: Peter Eisentraut, Mark Cave-Ayland, Magnus Hagander
Discussion: https://postgr.es/m/CAEepm=0XTkYvMci0WRubZcf_1am8=gP=7oJErpsUfRYcKF2gwg@mail.gmail.com
When copying from an active database tree, it's possible for files to be
deleted after we see them in a readdir() scan but before we can open them.
(Once we've got a file open, we don't expect any further errors from it
getting unlinked, though.) Tweak RecursiveCopy so it can cope with this
case, so as to avoid irreproducible test failures.
Back-patch to 9.6 where this code was added. In v10 and HEAD, also
remove unused "use RecursiveCopy" in one recovery test script.
Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/24621.1504924323@sss.pgh.pa.us
This is primarily useful for making tests of this utility more
deterministic, to avoid the complexity of starting pg_receivewal as a
deamon in TAP tests.
While this is less useful than the equivalent pg_recvlogical option,
users can as well use it for example to enforce WAL streaming up to a
end-of-backup position, to save only a minimal amount of WAL.
Use this new option to stream WAL data in a deterministic way within a
new set of TAP tests.
Author: Michael Paquier <michael.paquier@gmail.com>
This allows the compiler/linker to move the static variables to a
read-only segment. Not all the signature changes are necessary, but
it seems better to apply const in a consistent manner.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20170910232154.asgml44ji2b7lv3d@alap3.anarazel.de
