Fix a few places that were using appendStringInfo() when they should have
been using appendStringInfoString(). Also some cases of
appendPQExpBuffer() that would have been better suited to use
appendPQExpBufferChar(), and finally, some places that used
appendPQExpBuffer() when appendPQExpBufferStr() would have suited better.
There are no bugs are being fixed here. The aim is just to make the code
use the most optimal function for the job.
All the code being changed here is new to PG14. It makes sense to fix
these before we branch for PG15. There are a few other places that we
could fix, but those cases are older code so fixing those seems less
worthwhile as it may cause unnecessary back-patching pain in the future.
Author: Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716732158B1C4142C6FE375943D9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
When specified directly as DML queries, INSERT was not getting always
completed to "INSERT INTO", same for DELETE with "DELETE FROM". This
makes the completion behavior more consistent for both commands, saving
a few keystrokes.
Commands on policies, triggers, grant/revoke, etc. require only DELETE
as completion keyword.
Author: Haiying Tang
Reviewed-by: Dilip Kumar, Julien Rouhaud
Discussion: https://postgr.es/m/OS0PR01MB61135AE2B07CCD1AB8C6A0F6FB549@OS0PR01MB6113.jpnprd01.prod.outlook.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Commit e717a9a18 changed the longstanding rule that prosrc is NOT NULL
because when a SQL-language function is written in SQL-standard style,
we don't currently have anything useful to put there. This seems a poor
decision though, as it could easily have negative impacts on external
PLs (opening them to crashes they didn't use to have, for instance).
SQL-function-related code can just as easily test "is prosqlbody not
null" as "is prosrc null", so there's no real gain there either.
Hence, revert the NOT NULL marking removal and adjust related logic.
For now, we just put an empty string into prosrc for SQL-standard
functions. Maybe we'll have a better idea later, although the
history of things like pg_attrdef.adsrc suggests that it's not
easy to maintain a string equivalent of a node tree.
This also adds an assertion that queryDesc->sourceText != NULL
to standard_ExecutorStart. We'd been silently relying on that
for awhile, so let's make it less silent.
Also fix some overlooked documentation and test cases.
Discussion: https://postgr.es/m/2197698.1617984583@sss.pgh.pa.us
Commit 8ff1c94649 extended TRUNCATE command so that it can also truncate
foreign tables. But it forgot to support tab-complete for TRUNCATE on
foreign tables. That is, previously tab-complete for TRUNCATE displayed
only the names of regular tables.
This commit improves tab-complete for TRUNCATE so that it displays also
the names of foreign tables.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
When editing the previous query buffer, if the editor is exited
without modifying the temp file then clear the query buffer,
rather than re-loading (and probably re-executing) the previous
query buffer. This reduces the probability of accidentally
re-executing something you didn't intend to.
Similarly, in "\e file", if the file isn't actually modified
then don't load it into the query buffer. And in "\ef" and
"\ev", if no changes are made then clear the query buffer
instead of loading the function or view definition into it.
Cases where we fail to invoke the editor at all, or it returns
a nonzero status, are treated like the no-file-modification case.
Laurenz Albe, reviewed by Jacob Champion
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
Membership consists, implicitly, of the current database owner. Expect
use in template databases. Once pg_database_owner has rights within a
template, each owner of a database instantiated from that template will
exercise those rights.
Reviewed by John Naylor.
Discussion: https://postgr.es/m/20201228043148.GA1053024@rfd.leadboat.com
Allow a partition be detached from its partitioned table without
blocking concurrent queries, by running in two transactions and only
requiring ShareUpdateExclusive in the partitioned table.
Because it runs in two transactions, it cannot be used in a transaction
block. This is the main reason to use dedicated syntax: so that users
can choose to use the original mode if they need it. But also, it
doesn't work when a default partition exists (because an exclusive lock
would still need to be obtained on it, in order to change its partition
constraint.)
In case the second transaction is cancelled or a crash occurs, there's
ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final
steps.
The main trick to make this work is the addition of column
pg_inherits.inhdetachpending, initially false; can only be set true in
the first part of this command. Once that is committed, concurrent
transactions that use a PartitionDirectory will include or ignore
partitions so marked: in optimizer they are ignored if the row is marked
committed for the snapshot; in executor they are always included. As a
result, and because of the way PartitionDirectory caches partition
descriptors, queries that were planned before the detach will see the
rows in the detached partition and queries that are planned after the
detach, won't.
A CHECK constraint is created that duplicates the partition constraint.
This is probably not strictly necessary, and some users will prefer to
remove it afterwards, but if the partition is re-attached to a
partitioned table, the constraint needn't be rechecked.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
Jasen Betts reported yet another unintended side effect of commit
85c54287a: reconnecting with "\c service=whatever" did not have the
expected results. The reason is that starting from the output of
PQconndefaults() effectively allows environment variables (such
as PGPORT) to override entries in the service file, whereas the
normal priority is the other way around.
Not using PQconndefaults at all would require yet a third main code
path in do_connect's parameter setup, so I don't really want to fix
it that way. But we can have the logic effectively ignore all the
default values for just a couple more lines of code.
This patch doesn't change the behavior for "\c -reuse-previous=on
service=whatever". That remains significantly different from before
85c54287a, because many more parameters will be re-used, and thus
not be possible for service entries to replace. But I think this
is (mostly?) intentional. In any case, since libpq does not report
where it got parameter values from, it's hard to do differently.
Per bug #16936 from Jasen Betts. As with the previous patches,
back-patch to all supported branches. (9.5 is unfortunately now
out of support, so this won't get fixed there.)
Discussion: https://postgr.es/m/16936-3f524322a53a29f0@postgresql.org
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Only "IMPORT" was showing as result of the completion, while IMPORT
FOREIGN SCHEMA is the only command using this keyword in first
position. This changes the completion to show the full command name
instead of just "IMPORT".
Reviewed-by: Georgios Kokolatos, Julien Rouhaud
Discussion: https://postgr.es/m/YFL6JneBiuMWYyoh@paquier.xyz
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
psql's editing commands decide whether the user has edited the file
by checking for change of modification timestamp. This is probably
fine for a pre-existing file, but with a temporary file that is
created within the command, it's possible for a fast typist to
save-and-exit in less than the one-second granularity of stat(2)
timestamps. On Windows FAT filesystems the granularity is even
worse, 2 seconds, making the race a bit easier to hit.
To fix, try to set the temp file's mod time to be two seconds ago.
It's unlikely this would fail, but then again the race condition
itself is unlikely, so just ignore any error.
Also, we might as well check the file size as well as its mod time.
While this is a difficult bug to hit, it still seems worth
back-patching, to ensure that users' edits aren't lost.
Laurenz Albe, per gripe from Jacob Champion; based on fix suggestions
from Jacob and myself
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
Remove the entire idea of "stale stats" within nbtree VACUUM (stop
caring about stats involving the number of inserted tuples). Also
remove the vacuum_cleanup_index_scale_factor GUC/param on the master
branch (though just disable them on postgres 13).
The vacuum_cleanup_index_scale_factor/stats interface made the nbtree AM
partially responsible for deciding when pg_class.reltuples stats needed
to be updated. This seems contrary to the spirit of the index AM API,
though -- it is not actually necessary for an index AM's bulk delete and
cleanup callbacks to provide accurate stats when it happens to be
inconvenient. The core code owns that. (Index AMs have the authority
to perform or not perform certain kinds of deferred cleanup based on
their own considerations, such as page deletion and recycling, but that
has little to do with pg_class.reltuples/num_index_tuples.)
This issue was fairly harmless until the introduction of the
autovacuum_vacuum_insert_threshold feature by commit b07642db, which had
an undesirable interaction with the vacuum_cleanup_index_scale_factor
mechanism: it made insert-driven autovacuums perform full index scans,
even though there is no real benefit to doing so. This has been tied to
a regression with an append-only insert benchmark [1].
Also have remaining cases that perform a full scan of an index during a
cleanup-only nbtree VACUUM indicate that the final tuple count is only
an estimate. This prevents vacuumlazy.c from setting the index's
pg_class.reltuples in those cases (it will now only update pg_class when
vacuumlazy.c had TIDs for nbtree to bulk delete). This arguably fixes
an oversight in deduplication-related bugfix commit 48e12913.
[1] https://smalldatum.blogspot.com/2021/01/insert-benchmark-postgres-is-still.html
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA4WHthN5uU6+WScZ7+J_RcEjmcuH94qcoUPuB42ShXzg@mail.gmail.com
Backpatch: 13-, where autovacuum_vacuum_insert_threshold was added.
This partially reverts 096bbf7 and 9d2d457, undoing the libpq changes as
it could cause breakages in distributions that share one single libpq
version across multiple major versions of Postgres for extensions and
applications linking to that.
Note that the backend is unchanged here, and it still disables SSL
compression while simplifying the underlying catalogs that tracked if
compression was enabled or not for a SSL connection.
Per discussion with Tom Lane and Daniel Gustafsson.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
When ON_ERROR_ROLLBACK is enabled, psql releases a temporary savepoint
if it's idle in a valid transaction block after executing a query. But psql
doesn't do that after RELEASE or ROLLBACK is executed because a temporary
savepoint has already been destroyed in that case.
This commit changes psql's ON_ERROR_ROLLBACK so that it doesn't release
a temporary savepoint also when COMMIT AND CHAIN is executed. A temporary
savepoint doesn't need to be released in that case because
COMMIT AND CHAIN also destroys any savepoints defined within the transaction
to commit. Otherwise psql tries to release the savepoint that
COMMIT AND CHAIN has already destroyed and cause an error
"ERROR: savepoint "pg_psql_temporary_savepoint" does not exist".
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Arthur Nascimento
Reviewed-by: Fujii Masao, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
ALTER INDEX was able to handle that already. This adds tab completion
for all the remaining commands that support this grammar:
- ALTER FUNCTION
- ALTER PROCEDURE
- ALTER ROUTINE
- ALTER TRIGGER
- ALTER MATERIALIZED VIEW
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=iypYudXuMOAMOP4BpkaYbXxk=a2cdJppX0e9mJXWtuig@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
This patch adds the possibility to move indexes to a new tablespace
while rebuilding them. Both the concurrent and the non-concurrent cases
are supported, and the following set of restrictions apply:
- When using TABLESPACE with a REINDEX command that targets a
partitioned table or index, all the indexes of the leaf partitions are
moved to the new tablespace. The tablespace references of the non-leaf,
partitioned tables in pg_class.reltablespace are not changed. This
requires an extra ALTER TABLE SET TABLESPACE.
- Any index on a toast table rebuilt as part of a parent table is kept
in its original tablespace.
- The operation is forbidden on system catalogs, including trying to
directly move a toast relation with REINDEX. This results in an error
if doing REINDEX on a single object. REINDEX SCHEMA, DATABASE and
SYSTEM skip system relations when TABLESPACE is used.
Author: Alexey Kondratov, Michael Paquier, Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
The loops to identify word boundaries could access past the end of
the input string. Likely that would never result in an actual
crash, but it makes valgrind unhappy.
The logic to try different numbers of words didn't work when the
input has two words but we only have a match to the first, eg
"\h with select". (We must "continue" the pass loop, not "break".)
The logic to compute nl_count was bizarrely managed, and in at
least two code paths could end up calling PageOutput with
nl_count = 0, resulting in failing to paginate output that should
have been fed to the pager. Also, in v12 and up, the nl_count
calculation hadn't been updated to account for the addition of a URL.
The PQExpBuffer holding the command syntax details wasn't freed,
resulting in a session-lifespan memory leak.
While here, improve some comments, choose a more descriptive name
for a variable, fix inconsistent datatype choice for another variable.
Per bug #16837 from Alexander Lakhin. This code is very old,
so back-patch to all supported branches.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/16837-479bcd56040c71b3@postgresql.org
The new command lists extended statistics objects. All past releases
with extended statistics are supported.
This is a simplified version of commit 891a1d0bca, which had to be
reverted due to not considering pg_statistic_ext_data is not accessible
by regular users. Fields requiring access to this catalog were removed.
It's possible to add them, but it'll require changes to core.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra, Noriyoshi Shinoda
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
The new command lists extended statistics objects, possibly with their
sizes. All past releases with extended statistics are supported.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
This commit makes CLOSE, FETCH and MOVE commands tab-complete the list of
cursors. Also this commit makes DECLARE command tab-complete the options.
Author: Shinya Kato, Sawada Masahiko, tweaked by Fujii Masao
Reviewed-by: Shinya Kato, Sawada Masahiko, Fujii Masao
Discussion: https://postgr.es/m/b0e4c5c53ef84c5395524f5056fc71f0@MP-MSGSS-MBX001.msg.nttdata.co.jp
Formerly, TOAST objects were unconditionally suppressed, but since
\d is able to print them it's not very clear why these variants
should not. Instead, use the same rules as for system catalogs:
they can be seen if you write the 'S' modifier or a table name
pattern. (In practice, since hardly anybody would keep pg_toast
in their search_path, it's really down to whether you use a pattern
that can match pg_toast.*.)
No docs change seems necessary because the docs already say that
this happens for "system objects"; we're just classifying TOAST
tables as being that.
Justin Pryzby, reviewed by Laurenz Albe
Discussion: https://postgr.es/m/20201130165436.GX24052@telsasoft.com