Currently it's only possible for loadable modules to get control during
post-commit cleanup of a transaction. That doesn't work too well if they
want to do something that could throw an error; for example, an FDW might
need to issue a remote commit, which could well fail. To improve matters,
extend the existing APIs for XactCallback and SubXactCallback functions
to provide new pre-commit events for this purpose.
The release notes will need to mention that existing callback functions
should be checked to make sure they don't do something unwanted when one
of the new event types occurs. In the examples within our source tree,
contrib/sepgsql was fine but plpgsql had been a bit too cute.
Replication occurs only to memory on standby, not to disk,
so provides additional performance if user wishes to
reduce durability level slightly. Adds concept of multiple
independent sync rep queues.
Fujii Masao and Simon Riggs
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
Also avoid hardcoding the current default state by giving it the name
"on" and replace with a meaningful name that reflects its behaviour.
Coding only, no change in behaviour.
This means one less thing to configure when setting up synchronous
replication, and also avoids some ambiguity around what the behavior
should be when the settings of these variables conflict.
Fujii Masao, with additional hacking by me.
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
where a database has a non-default tablespaceid. Pass thru MyDatabaseId
and MyDatabaseTableSpace to allow file path to be re-created in
standby and correct invalidation to take place in all cases.
Update and rework xact_commit_desc() debug messages.
Bug report from Tom by code inspection. Fix by me.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
truncations in FSM code, call FreeSpaceMapTruncateRel from smgr_redo. To
make that cleaner from modularity point of view, move the WAL-logging one
level up to RelationTruncate, and move RelationTruncate and all the
related WAL-logging to new src/backend/catalog/storage.c file. Introduce
new RelationCreateStorage and RelationDropStorage functions that are used
instead of calling smgrcreate/smgrscheduleunlink directly. Move the
pending rel deletion stuff from smgrcreate/smgrscheduleunlink to the new
functions. This leaves smgr.c as a thin wrapper around md.c; all the
transactional stuff is now in storage.c.
This will make it easier to add new forks with similar truncation logic,
like the visibility map.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
temporary table; we can't support that because there's no way to clean up the
source backend's internal state if the eventual COMMIT PREPARED is done by
another backend. This was checked correctly in 8.1 but I broke it in 8.2 :-(.
Patch by Heikki Linnakangas, original trouble report by John Smith.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
Tom Lane
Bruce Momjian
Simon Riggs
Robert Haas
Heikki Linnakangas
Magnus Hagander
Joe Conway
PostgreSQL Daemon