Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
If the database has a non-default tablespace, we emitted a TABLESPACE
clause in the CREATE DATABASE command emitted by -C, even if
--no-tablespaces was also specified. This seems wrong, and it's
inconsistent with what pg_dumpall does, so change it. Per bug #14315
from Danylo Hlynskyi.
Back-patch to 9.5. The bug is much older, but it'd be a more invasive
change before 9.5 because dumpDatabase() hasn't got an easy way to get
to the outputNoTablespaces flag. Doesn't seem worth the work given
the lack of previous complaints.
Report: <20160908081953.1402.75347@wrigleys.postgresql.org>
StandbyRecoverPreparedTransactions() leaked the buffer
used for two phase state file. This was leaked once
at startup and at every shutdown checkpoint seen.
Backpatch to 9.6
Stas Kelvich
Until now, it used the current working directory. This makes it safe
for simultaneous invocations of gendef.pl, with different target
directories, to run from a single current working directory, such as
$(top_srcdir). The MSVC build system will soon rely on this.
Christian Ullrich, reviewed by Michael Paquier.
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Document the formerly-undocumented behavior that schema and comment
control-file entries for an extension are honored only during initial
installation, whereas other properties are also honored during updates.
While at it, do some copy-editing on the recently-added docs for CREATE
EXTENSION ... CASCADE, use links for some formerly vague cross references,
and make a couple other minor improvements.
Back-patch to 9.6 where CASCADE was added. The other parts of this
could go further back, but they're probably not important enough to
bother.
Users often get confused between COPY and \copy and try to use client-side
paths with COPY. The server then cannot find the file (if remote), or sees
a permissions problem (if local), or some variant of that. Emit a hint
about this in the most common cases.
In future we might want to expand the set of errnos for which the hint
gets printed, but be conservative for now.
Craig Ringer, reviewed by Christoph Berg and Tom Lane
Discussion: <CAMsr+YEqtD97qPEzQDqrCt5QiqPbWP_X4hmvy2pQzWC0GWiyPA@mail.gmail.com>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Mostly, explain how row xmin's used to be replaced by FrozenTransactionId
and no longer are. Do a little copy-editing on the side.
Per discussion with Egor Rogov. Back-patch to 9.4 where the behavioral
change occurred.
Discussion: <575D7955.6060209@postgrespro.ru>
Negative availMemLessRefund would be problematic. It's not entirely
clear whether the case can be hit in the code as it stands, but this
seems like good future-proofing in any case. While we're at it,
insist that the value be not merely positive but not tiny, so as to
avoid doing a lot of repalloc work for little gain.
Peter Geoghegan
Discussion: <CAM3SWZRVkuUB68DbAkgw=532gW0f+fofKueAMsY7hVYi68MuYQ@mail.gmail.com>
Brain fade in commit a00c58314: I was thinking that a string starting with
"-" could be taken as a switch depending on command line syntax. That's
true, but having appendShellString() quote it will not help, so we may as
well not do so. Per complaint from Peter Eisentraut.
What used to be four spaces somehow turned into a tab and a couple of
spaces in commit a00c58314, no doubt from overhelpful emacs autoindent.
Noted by Peter Eisentraut.
lazy_truncate_heap() was waiting for
VACUUM_TRUNCATE_LOCK_WAIT_INTERVAL, but in microseconds
not milliseconds as originally intended.
Found by code inspection.
Simon Riggs
Some of the comments added by the CREATE EXTENSION CASCADE patch were
a bit sloppy, and I didn't care for redeclaring the same local variable
inside a nested block either. No functional changes.
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
When pg_logical_slot_get_changes(...) sets confirmed_flush_lsn to the point at
which replay stopped, it doesn't dirty the replication slot. So if the replay
didn't cause restart_lsn or catalog_xmin to change as well, this change will
not get written out to disk. Even on a clean shutdown.
If Pg crashes or restarts, a subsequent pg_logical_slot_get_changes(...) call
will see the same changes already replayed since it uses the slot's
confirmed_flush_lsn as the start point for fetching changes. The caller can't
specify a start LSN when using the SQL interface.
Mark the slot as dirty after reading changes using the SQL interface so that
users won't see repeated changes after a clean shutdown. Repeated changes still
occur when using the walsender interface or after an unclean shutdown.
Craig Ringer
Andres is apparently the only hacker who thinks this code is better as-is.
I (tgl) follow some of his logic, but the fact that it's setting off
warnings from static code analyzers seems like a sufficient reason to
put the complexity into a comment rather than the code.
Aleksander Alekseev
Discussion: <20160404190345.54d84ee8@fujitsu>
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
Commit b2cbced9e instituted a policy of referring to the timezone database
as the "IANA timezone database" in our user-facing documentation.
Propagate that wording into a couple of places that were still using "zic"
to refer to the database, which is definitely not right (zic is the
compilation tool, not the data).
Back-patch, not because this is very important in itself, but because
we routinely cherry-pick updates to the tznames files and I don't want
to risk future merge failures.
split_to_stringlist() doesn't modify its first argument nor expect it
to remain valid after exit, so there's no need to duplicate the optarg
string at the call sites. Per Coverity. (This has been wrong all along,
but commit 052cc223d changed the useless calls from "strdup" to
"pg_strdup", which apparently made Coverity think it's a new bug.
It's not, but it's also not worth back-patching.)
Coverity complained about the for(;;) loop, because it never actually
iterated. It was used just to be able to use "break" to exit it early. I
agree with Coverity, that's a bit confusing, so refactor the code to
use if-else instead.
While we're at it, use a local variable to hold the "current" node. That's
shorter and clearer than referring to "iter->last_visited" all the time.
In addition to the existing decimal-milliseconds output value,
display the same value in mm:ss.fff format if it exceeds one second.
Tack on hours and even days fields if the interval is large enough.
This avoids needing mental arithmetic to convert the values into
customary time units.
Corey Huinker, reviewed by Gerdan Santos; bikeshedding by many
Discussion: <CADkLM=dbC4R8sbbuFXQVBFWoJGQkTEW8RWnC0PbW9nZsovZpJQ@mail.gmail.com>
These were evidently introduced by yesterday's commit 9cca11c91,
which perhaps needs more review than it got.
Per report from Andreas Seltenreich and additional examination
of nearby code.
Report: <87oa45qfwq.fsf@credativ.de>
computeLeafRecompressWALData() tried to produce a uint16 WAL log field by
memcpy'ing the first two bytes of an int-sized variable. That accidentally
works on little-endian hardware, but not at all on big-endian. Replay then
thinks it's looking at an ADDITEMS action with zero entries, and reads the
first two bytes of the first TID therein as the next segno/action,
typically leading to "unexpected GIN leaf action" errors during replay.
Even if replay failed to crash, the resulting GIN index page would surely
be incorrect. To fix, just declare the variable as uint16 instead.
Per bug #14295 from Spencer Thomason (much thanks to Spencer for turning
his problem into a self-contained test case). This likely also explains
a previous report of the same symptom from Bernd Helmle.
Back-patch to 9.4 where the problem was introduced (by commit 14d02f0bb).
Discussion: <20160826072658.15676.7628@wrigleys.postgresql.org>
Possible-Report: <2DA7350F7296B2A142272901@eje.land.credativ.lan>
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
When building libpq, ip.c and md5.c were symlinked or copied from
src/backend/libpq into src/interfaces/libpq, but now that we have a
directory specifically for routines that are shared between the server and
client binaries, src/common/, move them there.
Some routines in ip.c were only used in the backend. Keep those in
src/backend/libpq, but rename to ifaddr.c to avoid confusion with the file
that's now in common.
Fix the comment in src/common/Makefile to reflect how libpq actually links
those files.
There are two more files that libpq symlinks directly from src/backend:
encnames.c and wchar.c. I don't feel compelled to move those right now,
though.
Patch by Michael Paquier, with some changes by me.
Discussion: <69938195-9c76-8523-0af8-eb718ea5b36e@iki.fi>
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Reviewed-by: Andrey Borodin
Discussion: <c0545351-a467-5b76-6d46-4840d1ea8aa4@iki.fi>
While we don't need multiple iterators at the moment, the interface is
nicer and less dangerous this way.
Aleksander Alekseev, with some changes by me.
A majority of callers seem to have believed that this was the API spec
already, because they omitted any check for a NULL result, and hence
would crash on an out-of-shared-memory failure. The original proposal
was to just add such error checks everywhere, but that does nothing to
prevent similar omissions in future. Instead, let's make ShmemAlloc()
throw the error (so we can remove the caller-side checks that do exist),
and introduce a new function ShmemAllocNoError() that has the previous
behavior of returning NULL, for the small number of callers that need
that and are prepared to do the right thing. This also lets us remove
the rather wishy-washy behavior of printing a WARNING for out-of-shmem,
which never made much sense: either the caller has a strategy for
dealing with that, or it doesn't. It's not ShmemAlloc's business to
decide whether a warning is appropriate.
The v10 release notes will need to call this out as a significant
source-code change. It's likely that it will be a bug fix for
extension callers too, but if not, they'll need to change to using
ShmemAllocNoError().
This is nominally a bug fix, but the odds that it's fixing any live
bug are actually rather small, because in general the requests
being made by the unchecked callers were already accounted for in
determining the overall shmem size, so really they ought not fail.
Between that and the possible impact on extensions, no back-patch.
Discussion: <24843.1472563085@sss.pgh.pa.us>
Unlike PL/Tcl, PL/Perl at least made an attempt to clean up after itself
when a function gets redefined. But it was still using TopMemoryContext
for the fn_mcxt of argument/result I/O functions, resulting in the
potential for memory leaks depending on what those functions did, and the
retail alloc/free logic was pretty bulky as well. Fix things to use a
per-function memory context like the other PLs now do. Tweak a couple of
places where things were being done in a not-very-safe order (on the
principle that a memory leak is better than leaving global state
inconsistent after an error). Also make some minor cosmetic adjustments,
mostly in field names, to make the code look similar to the way PL/Tcl does
now wherever it's essentially the same logic.
Michael Paquier and Tom Lane
Discussion: <CAB7nPqSOyAsHC6jL24J1B+oK3p=yyNoFU0Vs_B6fd2kdd5g5WQ@mail.gmail.com>
Formerly, the memory used to represent a PL/Tcl function was allocated with
malloc() or in TopMemoryContext, and we'd leak it all if the function got
redefined during the session. Instead, create a per-function context and
keep everything in or under that context. Add a reference-counting
mechanism (like the one plpgsql has long had) so that we can safely clean
up an old function definition, either immediately if it's not being
executed or at the end of the outermost execution.
Currently, we only detect that a cached function is obsolete when we next
attempt to call that function. So this covers the updated-definition case
but leaves cruft around after DROP FUNCTION. It's not clear whether it's
worth installing a syscache invalidation callback to watch for drops;
none of the other PLs do, so for now we won't do it here either.
Michael Paquier and Tom Lane
Discussion: <CAB7nPqSOyAsHC6jL24J1B+oK3p=yyNoFU0Vs_B6fd2kdd5g5WQ@mail.gmail.com>
The hack embodied in commit 4ba61a487 no longer works after today's change
to allow DatumGetFloat4/Float4GetDatum to be inlined (commit 14cca1bf8).
Probably what's happening is that the faulty compilers are deciding that
the now-inlined assignment is a no-op and so they're not required to
round to float4 width.
We had a bunch of similar issues earlier this year in the degree-based
trig functions, and eventually settled on using volatile intermediate
variables as the least ugly method of forcing recalcitrant compilers
to do what the C standard says (cf commit 82311bcdd). Let's see if
that method works here.
Discussion: <4640.1472664476@sss.pgh.pa.us>
Since we removed SSL renegotiation, there's no longer any reason to
keep track of the amount of data transferred over the link.
Daniel Gustafsson
Discussion: <FEA7F89C-ECDF-4799-B789-2F8DDCBA467F@yesql.se>
Now that we are OK with using static inline functions, we can use them
to avoid function call overhead of pass-by-val versions of Float4GetDatum,
DatumGetFloat8, and Float8GetDatum. Those functions are only a few CPU
instructions long, but they could not be written into macros previously,
because we need a local union variable for the conversion.
I kept the pass-by-ref versions as regular functions. They are very simple
too, but they call palloc() anyway, so shaving a few instructions from the
function call doesn't seem so important there.
Discussion: <dbb82a4a-2c15-ba27-dd0a-009d2aa72b77@iki.fi>
This can't really work because standby_mode expects there to be more
WAL arriving, which there will not ever be because there's no WAL
receiver process to fetch it. Moreover, if standby_mode is on then
hot standby might also be turned on, causing even more strangeness
because that expects read-only sessions to be executing in parallel.
Bernd Helmle reported a case where btree_xlog_delete_get_latestRemovedXid
got confused, but rather than band-aiding individual problems it seems
best to prevent getting anywhere near this state in the first place.
Back-patch to all supported branches.
In passing, also fix some omissions of errcodes in other ereport's in
readRecoveryCommandFile().
Michael Paquier (errcode hacking by me)
Discussion: <00F0B2CEF6D0CEF8A90119D4@eje.credativ.lan>
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Michael Paquier, with some adjustments by me
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
The previous API for this function had it returning a malloc'd string.
That meant that callers had to check for NULL return, which few of them
were doing, and it also meant that callers had to remember to free()
the string later, which required extra logic in most cases.
Instead, make simple_prompt() write into a buffer supplied by the caller.
Anywhere that the maximum required input length is reasonably small,
which is almost all of the callers, we can just use a local or static
array as the buffer instead of dealing with malloc/free.
A fair number of callers used "pointer == NULL" as a proxy for "haven't
requested the password yet". Maintaining the same behavior requires
adding a separate boolean flag for that, which adds back some of the
complexity we save by removing free()s. Nonetheless, this nets out
at a small reduction in overall code size, and considerably less code
than we would have had if we'd added the missing NULL-return checks
everywhere they were needed.
In passing, clean up the API comment for simple_prompt() and get rid
of a very-unnecessary malloc/free in its Windows code path.
This is nominally a bug fix, but it does not seem worth back-patching,
because the actual risk of an OOM failure in any of these places seems
pretty tiny, and all of them are client-side not server-side anyway.
This patch is by me, but it owes a great deal to Michael Paquier
who identified the problem and drafted a patch for fixing it the
other way.
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>