There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
Previously, the tests were structured so as all the queries whose plans
are checked run first, followed by pattern checks using the full set of
server logs. This can be problematic when extending the tests, as this
increases query plan overlaps, where two tests finish by having similar
plan outputs potentially invalidating the tests wanted.
The tests are refactored so as log content matches are checked in
isolation of each query run, by grabbing the position of the server logs
before running each query whose plan is generated in the logs. This
avoids issues when extending the tests, something that would become a
larger problem with a follow-up patch that adds a new GUC in
auto_explain to control the size of the each parameter logged.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
MemSet() with a value other than 0 just falls back to memset(), so the
indirection is unnecessary if the value is constant and not 0. Since
there is some interest in getting rid of MemSet(), this gets some easy
cases out of the way. (There are a few MemSet() calls that I didn't
change to maintain the consistency with their surrounding code.)
Discussion: https://www.postgresql.org/message-id/flat/CAEudQApCeq4JjW1BdnwU=m=-DvG5WyUik0Yfn3p6UNphiHjj+w@mail.gmail.com
Commit a117cebd63 used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
The macro is being applied to a TOAST pointer, not a varlena header.
Therefore the use of VARATT_IS_COMPRESSED() is wrong. We can check
VARATT_EXTERNAL_IS_COMPRESSED(), but then we don't need the length
check that follows.
Report and fix by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/20220517.162719.1671558681467343711.horikyota.ntt@gmail.com
Since a117cebd6, some older gcc versions issue "variable may be used
uninitialized in this function" complaints for brin_summarize_range.
Silence that using the same coding pattern as in bt_index_check_internal;
arguably, a117cebd6 had too narrow a view of which compilers might give
trouble.
Nathan Bossart and Tom Lane. Back-patch as the previous commit was.
Discussion: https://postgr.es/m/20220601163537.GA2331988@nathanxps13
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
Expand the comment about the parallel_commit option to mention that the
default is false.
Also, since the comment about alteration of the keep_connections option,
which was located above the expanded comment, holds true for the
parallel_commit option, rewrite it to reflect this, and move it to after
the expanded comment.
Follow-up for commit 04e706d42.
Discussion: https://postgr.es/m/CAPmGK16Kg2Bf90sqzcZ4YM5cN_G-4h7wFUS01qQpqNB%2B2BG5_w%40mail.gmail.com
The code for unloading a library has been commented-out for over 12
years, ever since commit 602a9ef5a7, and we're
no closer to supporting it now than we were back then.
Nathan Bossart, reviewed by Michael Paquier and by me.
Discussion: http://postgr.es/m/Ynsc9bRL1caUSBSE@paquier.xyz
When a feature enumerates relations and runs functions associated with
all found relations, the feature's user shall not need to trust every
user having permission to create objects. BRIN-specific functionality
in autovacuum neglected to account for this, as did pg_amcheck and
CLUSTER. An attacker having permission to create non-temp objects in at
least one schema could execute arbitrary SQL functions under the
identity of the bootstrap superuser. CREATE INDEX (not a
relation-enumerating operation) and REINDEX protected themselves too
late. This change extends to the non-enumerating amcheck interface.
Back-patch to v10 (all supported versions).
Sergey Shinderuk, reviewed (in earlier versions) by Alexander Lakhin.
Reported by Alexander Lakhin.
Security: CVE-2022-1552
The PXE_CIPHER_INIT error is used to report initialization errors, so
appending a questionmark to the error isn't entirely accurate (using a
space before the questionmark doubly so).
Discussion: https://postgr.es/m/C89D932C-501E-4473-9750-638CFCD9095E@yesql.se
Report OpenSSL errors during initialization as PXE_CIPHER_INIT since
that's just what they were, and not generic unknown errors. This also
removes the last users of the generic error, and thus it can be removed.
Discussion: http://postgr.es/m/C89D932C-501E-4473-9750-638CFCD9095E@yesql.se
Instability in the test for pg_walinspect revealed that
pg_get_wal_records_info_till_end_of_wal(x) would try to decode all the
records with a start LSN earlier than the flush LSN, even though that
might include a partial record at the end of the range. In that case,
read_local_xlog_page_no_wait() would return NULL when it tried to read
past the flush LSN, which would be interpreted as an error by the
caller. That caused a test failure only on a BF animal that had been
restarted recently, but could be expected to happen in the wild quite
easily depending on the alignment of various parameters.
Fix by using private data in read_local_xlog_page_no_wait() to signal
end-of-wal to the caller, so that it can be properly distinguished
from a real error.
Discussion: https://postgr.es/m/Ymd/e5eeZMNAkrXo%40paquier.xyz
Discussion: https://postgr.es/m/111657.1650910309@sss.pgh.pa.us
Authors: Thomas Munro, Bharath Rupireddy.
mark_async_capable_plan(), which is called from create_append_plan() to
determine whether subplans are async-capable, failed to take into
account that the given subplan created from a given subpath might
include a gating Result node if the subpath is a SubqueryScanPath or
ForeignPath, causing a segmentation fault there when the subplan created
from a SubqueryScanPath includes the Result node, or causing
ExecAsyncRequest() to throw an error about an unrecognized node type
when the subplan created from a ForeignPath includes the Result node,
because in the latter case the Result node was unintentionally
considered as async-capable, but we don't currently support executing
Result nodes asynchronously. Fix by modifying mark_async_capable_plan()
to disable asynchronous execution in such cases. Also, adjust code in
the ProjectionPath case in mark_async_capable_plan(), for consistency
with other cases, and adjust/improve comments there.
is_async_capable_path() added in commit 27e1f1456, which was rewritten
to mark_async_capable_plan() in a later commit, has the same issue,
causing the error at execution mentioned above, so back-patch to v14
where the aforesaid commit went in.
Per report from Justin Pryzby.
Etsuro Fujita, reviewed by Zhihong Yu and Justin Pryzby.
Discussion: https://postgr.es/m/20220408124338.GK24419%40telsasoft.com
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), falling back to rename() on some platforms
(e.g., Windows where link() followed by unlink() is not concurrent-safe,
see 909b449). Most callers of durable_rename_excl() use it just in case
there is an existing file, but it happens that for all of them we never
expect a target file to exist (WAL segment recycling, creation of
timeline history file and basic_archive).
basic_archive used durable_rename_excl() to avoid overwriting an archive
concurrently created by another server. Now, there is a stat() call to
avoid overwriting an existing archive a couple of lines above, so note
that this change opens a small TOCTOU window in this module between the
stat() call and durable_rename().
Furthermore, as mentioned in the top comment of durable_rename_excl(),
this routine can result in multiple hard links to the same file and data
corruption, with two or more links to the same file in pg_wal/ if a
crash happens before the unlink() call during WAL recycling.
Specifically, this would produce links to the same file for the current
WAL file and the next one because the half-recycled WAL file was
re-recycled during crash recovery of a follow-up cluster restart.
This change replaces all calls to durable_rename_excl() with
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it, and all those code paths never expect an existing file (a
couple of assertions are added to check after that, in case).
This is a bug fix, but knowing the unlikeliness of the problem involving
one of more crashes at an exceptionally bad moment, no backpatch is
done. This could be revisited in the future.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Previously, we allowed this, but such triggers might query the table to
insert into and act differently if the tuples that have already been
processed and prepared for insertion are not there, so disable it in
such cases.
Back-patch to v14 where batch insert was added.
Discussion: https://postgr.es/m/CAPmGK16_uPqsmgK0-LpLSUk54_BoK13bPrhxhfjSoSTVz414hA%40mail.gmail.com
We have some streaming tests that rely on the size of changes which can
fail if there are additional changes like invalidation messages by
background activity like auto analyze. Avoid such failures by increasing
autovacuum_naptime to a reasonably high value (1d).
Author: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/1958043.1650129119@sss.pgh.pa.us
Getting from get_raw_page() an all-zero page is considered as a valid
case by the buffer manager and it can happen for example when finding a
corrupted page with zero_damaged_pages enabled (using zero_damaged_pages
to look at corrupted pages happens), or after a crash when a relation
file is extended before any WAL for its new data is generated (before a
vacuum or autovacuum job comes in to do some cleanup).
However, all the functions of pageinspect, as of the index AMs (except
hash that has its own idea of new pages), heap, the FSM or the page
header have never worked with all-zero pages, causing various crashes
when going through the page internals.
This commit changes all the pageinspect functions to be compliant with
all-zero pages, where the choice is made to return NULL or no rows for
SRFs when finding a new page. get_raw_page() still works the same way,
returning a batch of zeros in the bytea of the page retrieved. A hard
error could be used but NULL, while more invasive, is useful when
scanning relation files in full to get a batch of results for a single
relation in one query. Tests are added for all the code paths
impacted.
Reported-by: Daria Lepikhova
Author: Michael Paquier
Discussion: https://postgr.es/m/561e187b-3549-c8d5-03f5-525c14e65bd0@postgrespro.ru
Backpatch-through: 10
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
This commit adds two new columns to pg_stat_statements, called
temp_blk_read_time and temp_blk_write_time. Those columns respectively
show the time spent to read and write temporary file blocks on disk,
whose tracking has been added in efb0ef9. This information is
available when track_io_timing is enabled, like blk_read_time and
blk_write_time.
pg_stat_statements is updated to version to 1.10 as an effect of the
newly-added columns. Tests for the upgrade path 1.9->1.10 are added.
PGSS_FILE_HEADER is bumped for the new stats file format.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
These five code paths are the last ones that made use of
PageGetSpecialPointer() to get the special area of such pages, while
those index AMs have already macros to do this job.
Noticed while reviewing the use PageGetSpecialPointer() in the whole
tree, in relation to the recent commit d16773c.
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
It was possible to run those tests with installcheck, but they are
actually unstable as concurrent autovacuum jobs could prevent the
truncation of the filespace map to happen (aka the scan of pg_database
when building the list of relations to clean), an assumption we rely on
when checking that the FSM of the relation gets truncated during a
manual vacuum after deleting all the relation's data.
This commit adds a NO_INSTALLCHECK to disallow installcheck, and
introduces the use of a custom configuration file with autovacuum
disabled.
It happens that we already do that in the recovery test
008_fsm_truncation, for example.
Reported-by: Tom Lane, via buildfarm member skink
Discussion: https://postgr.es/m/381910.1648401526@sss.pgh.pa.us
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
A couple of code paths use the special area on the page passed by the
function caller, expecting to find some data in it. However, feeding
an incorrect page can lead to out-of-bound reads when trying to access
the page special area (like a heap page that has no special area,
leading PageGetSpecialPointer() to grab a pointer outside the allocated
page).
The functions used for hash and btree indexes have some protection
already against that, while some other functions using a relation OID
as argument would make sure that the access method involved is correct,
but functions taking in input a raw page without knowing the relation
the page is attached to would run into problems.
This commit improves the set of checks used in the code paths of BRIN,
btree (including one check if a leaf page is found with a non-zero
level), GIN and GiST to verify that the page given in input has a
special area size that fits with each access method, which is done
though PageGetSpecialSize(), becore calling PageGetSpecialPointer().
The scope of the checks done is limited to work with pages that one
would pass after getting a block with get_raw_page(), as it is possible
to craft byteas that could bypass existing code paths. Having too many
checks would also impact the usability of pageinspect, as the existing
code is very useful to look at the content details in a corrupted page,
so the focus is really to avoid out-of-bound reads as this is never a
good thing even with functions whose execution is limited to
superusers.
The safest approach could be to rework the functions so as these fetch a
block using a relation OID and a block number, but there are also cases
where using a raw page is useful.
Tests are added to cover all the code paths that needed such checks, and
an error message for hash indexes is reworded to fit better with what
this commit adds.
Reported-By: Alexander Lakhin
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/16527-ef7606186f0610a1@postgresql.org
Discussion: https://postgr.es/m/561e187b-3549-c8d5-03f5-525c14e65bd0@postgrespro.ru
Backpatch-through: 10
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
Commit 85c696112 introduced this function to deduplicate code in the
transaction callback functions, but the SQL command passed as an
argument to it was useless when it returned before aborting a remote
transaction using the command. Modify pgfdw_abort_cleanup() so that it
constructs the command when/if necessary, as before, removing the
argument from it. Also update comments in pgfdw_abort_cleanup() and one
of the calling functions.
Etsuro Fujita, reviewed by David Zhang.
Discussion: https://postgr.es/m/CAPmGK158hrd%3DZfXmgkmNFHivgh18e4oE2Gz151C2Q4OBDjZ08A%40mail.gmail.com
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
The number of relation pages is tricky to get right in a portable way,
particularly across 32b and 64b builds, but checking after the existence
of the FSM and if there is any space available space should be stable
enough with a minimal number of tuples involved. This commit introduces
checks on a table with some btree, BRIN and hash indexes, as a first
attempt.
Author: Dong Wook Lee, Fabrízio de Royes Mello, Michael Paquier
Discussion: https://postgr.es/m/CAAcByaJ5KW3bd7fJr=jPEyK8M_UzXJFHHBVuOcBe+JHD8txRyQ@mail.gmail.com
Use the padding provided by OpenSSL instead of doing it ourselves.
The internal implementation was once applicable to the non-OpenSSL
code paths, but those have since been removed. The padding algorithm
is still the same.
The OpenSSL padding implementation is stricter than the previous
internal one: Bad padding during decryption is now an error, and
encryption without padding now requires the input size to be a
multiple of the block size, otherwise it is also an error.
Previously, these cases silently proceeded, in spite of the
documentation saying otherwise.
Add some test cases about this, too. (The test cases are in
rijndael.sql, but they apply to all encryption algorithms.)
Reviewed-by: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ba94c26b-0c58-c97e-7a44-f44e08b4cca2%40enterprisedb.com
911e702077 implemented operator class parameters including the signature length
in ltree. Previously, the signature length for gist_ltree_ops was 8. Because
of bug 911e702077 the default signature length for gist_ltree_ops became 28 for
ltree 1.1 (where options method is NOT provided) and 8 for ltree 1.2 (where
options method is provided). This commit changes the default signature length
for ltree 1.1 to 8.
Existing gist_ltree_ops indexes might be corrupted in various scenarios.
Thus, we have to recommend reindexing all the gist_ltree_ops indexes after
the upgrade.
Reported-by: Victor Yegorov
Reviewed-by: Tomas Vondra, Tom Lane, Andres Freund, Nikita Glukhov
Reviewed-by: Andrew Dunstan
Author: Tomas Vondra, Alexander Korotkov
Discussion: https://postgr.es/m/17406-71e02820ae79bb40%40postgresql.org
Discussion: https://postgr.es/m/d80e0a55-6c3e-5b26-53e3-3c4f973f737c%40enterprisedb.com
This caused the function to fail, as the aligned copy of the raw page
given by the function caller was not saved in the correct memory
context, which needs to be multi_call_memory_ctx in this case.
Issue introduced by 076f4d9.
Per buildfarm members sifika, mylodon and longfin. I have reproduced
that locally with macos.
Discussion: https://postgr.es/m/YjFPOtfCW6yLXUeM@paquier.xyz
Backpatch-through: 10
This commit fixes a set of issues related to the use of the SQL
functions in this module when the caller is able to pass down raw page
data as input argument:
- The page size check was fuzzy in a couple of places, sometimes
looking after only a sub-range, but what we are looking for is an exact
match on BLCKSZ. After considering a few options here, I have settled
down to do a generalization of get_page_from_raw(). Most of the SQL
functions already used that, and this is not strictly required if not
accessing an 8-byte-wide value from a raw page, but this feels safer in
the long run for alignment-picky environment, particularly if a code
path begins to access such values. This also reduces the number of
strings that need to be translated.
- The BRIN function brin_page_items() uses a Relation but it did not
check the access method of the opened index, potentially leading to
crashes. All the other functions in need of a Relation already did
that.
- Some code paths could fail on elog(), but we should to use ereport()
for failures that can be triggered by the user.
Tests are added to stress all the cases that are fixed as of this
commit, with some junk raw pages (\set VERBOSITY ensures that this works
across all page sizes) and unexpected index types when functions open
relations.
Author: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/20220218030020.GA1137@telsasoft.com
Backpatch-through: 10
As a demonstration of the sort of thing that can be done by adding a
custom backup target, this defines a 'shell' target which executes a
command defined by the system administrator. The command is executed
once for each tar archive generate by the backup and once for the
backup manifest, if any. Each time the command is executed, it
receives the contents of th file for which it is executed via standard
input.
The configured command can use %f to refer to the name of the archive
(e.g. base.tar, $TABLESPACE_OID.tar, backup_manifest) and %d to refer
to the target detail (pg_basebackup --target shell:DETAIL). A target
detail is required if %d appears in the configured command and
forbidden if it does not.
Patch by me, reviewed by Abhijit Menon-Sen.
Discussion: http://postgr.es/m/CA+TgmoaqvdT-u3nt+_kkZ7bgDAyqDB0i-+XOMmr5JN2Rd37hxw@mail.gmail.com
Apparently, the previous update
(2e0e066679) must have used a stale
input file and missed a few additions that were added shortly before
the CLDR release. Update this now so that the next update really only
changes things new in that version.
Some of the test_decoding regression tests are unstable due to modifying
a sequence. The first increment of a sequence after a checkpoint is
always logged (and thus decoded), which makes the output unpredictable.
The runs are usually much shorter than a checkpoint internal, so these
failures are rare, but we've seen a couple of them on animals that are
either slow or are running with valgrind/clobber cache/...
Fixed by skipping sequence decoding in most tests, with the exception of
the test aimed at testing decoding of sequences.
Reported-by: Amita Kapila
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove Python 2 specific code, including
the "Python 2/3 porting layer".
The code to detect conflicts between plpython using Python 2 and 3 is not
removed, in case somebody creates an out-of-tree version adding back support
for Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove regression testing infrastructure
dealing with differing output between Python 2 / 3.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove extension variants specific to
Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This makes more consistent the SRF-related checks in the area of
PL/pgSQL, PL/Perl, PL/Tcl, pageinspect and some of the JSON worker
functions, making it easier to grep for the same error patterns through
the code, reducing a bit the translation work.
It is worth noting that each_worker_jsonb()/each_worker() in jsonfuncs.c
and pageinspect's brin_page_items() were doing a check on expectedDesc
that is not required as they fetch their tuple descriptor directly from
get_call_result_type(). This looks like a set of copy-paste errors that
have spread over the years.
This commit is a continuation of the changes begun in 07daca5, for any
remaining code paths on sight. Like fcc2817, this makes the code more
consistent, easing the integration of a larger patch that will refactor
the way tuplestores are created and checked in a good portion of the
set-returning functions present in core.
I have worked my way through the changes of this patch by myself, and
Ranier has proposed the same changes in a different thread in parallel,
though there were some inconsistencies related in expectedDesc in what
was proposed by him.
Author: Michael Paquier, Ranier Vilela
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
Discussion: https://postgr.es/m/CAEudQApm=AFuJjEHLBjBcJbxcw4pBMwg2sHwXyCXYcbBOj3hpg@mail.gmail.com
postgres_fdw commits remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
commits. This patch allows it to commit the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_commit". The default is false.
Etsuro Fujita, reviewed by Fujii Masao and David Zhang.
Discussion: http://postgr.es/m/CAPmGK17dAZCXvwnfpr1eTfknTGdt%3DhYTV9405Gt5SqPOX8K84w%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
Since commit ffa2e4670, libpq accumulates text in conn->errorMessage
across a whole query cycle. In some situations, we may report more
than one error event within a cycle: the easiest case to reach is
where we report a FATAL error message from the server, and then a
bit later we detect loss of connection. Since, historically, each
error PGresult bears the entire content of conn->errorMessage,
this results in duplication of the FATAL message in any output that
concatenates the contents of the PGresults.
Accumulation in errorMessage still seems like a good idea, especially
in view of the number of places that did ad-hoc error concatenation
before ffa2e4670. So to fix this, let's track how much of
conn->errorMessage has been read out into error PGresults, and only
include new text in later PGresults. The tricky part of that is
to be sure that we never discard an error PGresult once made (else
we'd risk dropping some text, a problem much worse than duplication).
While libpq formerly did that in some code paths, a little bit of
rearrangement lets us postpone making an error PGresult at all until
we are about to return it.
A side benefit of that postponement is that it now becomes practical
to return a dummy static PGresult in cases where we hit out-of-memory
while trying to manufacture an error PGresult. This eliminates the
admittedly-very-rare case where we'd return NULL from PQgetResult,
indicating successful query completion, even though what actually
happened was an OOM failure.
Discussion: https://postgr.es/m/ab4288f8-be5c-57fb-2400-e3e857f53e46@enterprisedb.com
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
This function is unreferenced in modern usage; it was superseded in 9.1
by a core function of the same name. It has been left in place in the C
code only so that pre-9.1 SQL definitions of the contrib/xml2 functions
would continue to work. Eleven years seems like enough time for people
to have updated to the extension-style version of the xml2 module, so
let's drop this.
We did this once before, in 20540710e, and then reverted it because
the intended change of PGDLLEXPORT markings didn't happen. This
time the reason is to suppress link-time duplicate-symbol warnings
on AIX. That's not worth a lot perhaps, but the value of keeping
this function has surely dropped to about zero by now.
Discussion: https://postgr.es/m/2717731.1644778752@sss.pgh.pa.us
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
Regression tests need to use skip-empty-xacts = false, because there
might be accidental concurrent activity (like autovacuum), particularly
on slow machines. The tests added by 80901b3291 failed to do that in a
couple places, triggering occasional failures on buildfarm.
Fixing the tests however uncovered a bug in the code, because sequence
callbacks did not handle skip-empty-xacts properly. For trasactional
increments we need to check/update the xact_wrote_changes flag, and emit
the BEGIN if it's the first change in the transaction.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20220212220413.b25amklo7t4xb7ni%40alap3.anarazel.de
Commit 0da92dc530 improved the logical decoding infrastructure to handle
sequences, and did various changes to related parts (WAL logging etc.).
But it did not include any implementation of the new callbacks added to
OutputPluginCallbacks.
This extends test_decoding with two callbacks to decode sequences. The
decoding of sequences may be disabled using 'include-sequences', a new
option of the output plugin.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable. Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10. For later branches, this
serves as defense in depth. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com
The GiST sorted build currently chooses split points according to the only page
space utilization. That may lead to higher non-leaf keys overlap and, in turn,
slower search query answers.
This commit makes the sorted build use the opclass's picksplit method. Once
four pages at the level are accumulated, the picksplit method is applied until
each split partition fits the page. Some of our split algorithms could show
significant performance degradation while processing 4-times more data at once.
But those opclasses haven't received the sorted build support and shouldn't
receive it before their split algorithms are improved.
Discussion: https://postgr.es/m/CAHqSB9jqtS94e9%3D0vxqQX5dxQA89N95UKyz-%3DA7Y%2B_YJt%2BVW5A%40mail.gmail.com
Author: Aliaksandr Kalenik, Sergei Shoulbakov, Andrey Borodin
Reviewed-by: Björn Harrtell, Darafei Praliaskouski, Andres Freund
Reviewed-by: Alexander Korotkov
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
Given the existing stipulation that path_contains_parent_reference()
must only be invoked on canonicalized paths, we can simplify things
in the wake of commit c10f830c5. It is now only possible to see
".." at the start of a relative path. That means we can simplify
path_contains_parent_reference() itself quite a bit, and it makes
the two existing outside call sites dead code, since they'd already
checked that the path is absolute.
We could now fold path_contains_parent_reference() into its only
remaining caller path_is_relative_and_below_cwd(). But it seems
better to leave it as a separately callable function, in case any
extensions are using it.
Also document the pre-existing requirement for
path_is_relative_and_below_cwd's input to be likewise canonicalized.
Shenhao Wang and Tom Lane
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com