on the most common individual lexemes in place of the mostly-useless default
behavior of counting duplicate tsvectors. Future work: create selectivity
estimation functions that actually do something with these stats.
(Some other things we ought to look at doing: using the Lossy Counting
algorithm in compute_minimal_stats, and using the element-counting idea for
stats on regular arrays.)
Jan Urbanski
Document return type of cast functions.
Also change documentation to prefer the term "binary coercible" in its
present sense instead of the previous term "binary compatible".
wal_segment_size to make those configuration parameters available to clients,
in the same way that block_size was previously exposed. Bernd Helmle, with
comments from Abhijit Menon-Sen and some further tweaking by me.
As the buffer could now be a lot larger than before, and copying it could
thus be a lot more expensive than before, use strcpy instead of memcpy to
copy the query string, as was already suggested in comments. Also, only copy
the PgBackendStatus struct and string if the slot is in use.
Patch by Thomas Lee, with some changes by me.
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
"make all", and then reference them there during the actual tests. This
makes the handling of these files more parallel to that of regress.so,
and in particular simplifies use of the regression tests outside the
original build tree. The PGDG and Red Hat RPMs have been doing this via
patches for a very long time. Inclusion of the change in core was requested
by Jørgen Austvik of Sun, and I can't see any reason not to.
I attempted to fix the MSVC scripts for this too, but they may need
further tweaking ...
* Add deferred trigger queue file
< This item involves dumping large queues into files.
> This item involves dumping large queues into files, or doing some
> kind of join to process all the triggers, or some bulk operation.
require SELECT privilege as well, since you normally need to read existing
column values within such commands. This behavior is according to spec,
but we'd never documented it before. Per gripe from Volkan Yazici.
the associated datatype as their equality member. This means that these
opclasses can now support plain equality comparisons along with LIKE tests,
thus avoiding the need for an extra index in some applications. This
optimization was not possible when the pattern opclasses were first introduced,
because we didn't insist that text equality meant bitwise equality; but we
do now, so there is no semantic difference between regular and pattern
equality operators.
I removed the name_pattern_ops opclass altogether, since it's really useless:
name's regular comparisons are just strcmp() and are unlikely to become
something different. Instead teach indxpath.c that btree name_ops can be
used for LIKE whether or not the locale is C. This might lead to a useful
speedup in LIKE queries on the system catalogs in non-C locales.
The ~=~ and ~<>~ operators are gone altogether. (It would have been nice to
keep them for backward compatibility's sake, but since the pg_amop structure
doesn't allow multiple equality operators per opclass, there's no way.)
A not-immediately-obvious incompatibility is that the sort order within
bpchar_pattern_ops indexes changes --- it had been identical to plain
strcmp, but is now trailing-blank-insensitive. This will impact
in-place upgrades, if those ever happen.
Per discussions a couple months ago.
IDENTITY to be more explicit about the possible hazards. Per gripe from Neil
and subsequent discussion. Eventually we may be able to get rid of this
warning, but for now it had better be there.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
HINT fields to a user-thrown error message, and to specify the SQLSTATE
error code to use. The syntax has also been tweaked so that the
Oracle-compatible case "RAISE exception_name" works (though you won't get a
very nice error message if you just write that much). Lastly, support
the Oracle-compatible syntax "RAISE" with no parameters to re-throw
the current error from within an EXCEPTION block.
In passing, allow the syntax SQLSTATE 'nnnnn' within EXCEPTION lists,
so that there is a way to trap errors with custom SQLSTATE codes.
Pavel Stehule and Tom Lane
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
< * Improve detection of shared memory segments being used by other
< FreeBSD jails
> * Improve detection of shared memory segments being used by others
> by checking the SysV shared memory field 'nattch'
> http://archives.postgresql.org/pgsql-hackers/2008-01/msg00673.php
instead of calling a bunch of individual functions.
This function can also be called directly, taking a PID as an argument, to
return only the data for a single PID.
let XLOG_BLCKSZ and XLOG_SEG_SIZE be set via configure. Per a proposal by
Mark Wong, though I thought it better to call the switches after "wal" rather
than "xlog".
support for a nonsegmented mode from md.c. Per recent discussions, there
doesn't seem to be much value in a "never segment" option as opposed to
segmenting with a suitably large segment size. So instead provide a
configure-time switch to set the desired segment size in units of gigabytes.
While at it, expose a configure switch for BLCKSZ as well.
Zdenek Kotala
it vary with BLCKSZ as before. This agrees with what the documentation says,
and avoids a regression test problem when BLCKSZ is larger than default.
Per recent discussion.
do CancelBackup at a sane place, fix some oversights in the state transitions,
allow only superusers to connect while we are waiting for backup mode to end.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
version ones, to make it clear to users just browsing the notes
that there are a lot more changes available from whatever version
they are at than what's in the minor version release notes.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
instead of plan time. Extend the amgettuple API so that the index AM returns
a boolean indicating whether the indexquals need to be rechecked, and make
that rechecking happen in nodeIndexscan.c (currently the only place where
it's expected to be needed; other callers of index_getnext are just erroring
out for now). For the moment, GIN and GIST have stub logic that just always
sets the recheck flag to TRUE --- I'm hoping to get Teodor to handle pushing
that control down to the opclass consistent() functions. The planner no
longer pays any attention to amopreqcheck, and that catalog column will go
away in due course.
the server version check is now always enforced. Relax the version check to
allow a server that is of pg_dump's own major version but a later minor
version; this is the only case that -i was at all safe to use in.
pg_restore already enforced only a very weak version check, so this is
really just a documentation change for it.
Per discussion.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
algorithm. This is a good deal slower than our old roundoff-error-prone
code for long inputs, so we keep the old code for use in the transcendental
functions, where everything is approximate anyway. Also create a
user-accessible function div(numeric, numeric) to provide access to the
exact result of trunc(x/y) --- since the regular numeric / operator will
round off its result, simply computing that expression in SQL doesn't
reliably give the desired answer. This fixes bug #3387 and various related
corner cases, and improves the usefulness of PG for high-precision integer
arithmetic.
specify the cost values to use, instead of always using 1's.
Volkan Yazici
In passing, remove fuzzystrmatch.h, which contained a bunch of stuff that had
no business being in a .h file; fold it into its only user, fuzzystrmatch.c.
that is commands that have out-of-line parameters but the plan is prepared
assuming that the parameter values are constants. This is needed for the
plpgsql EXECUTE USING patch, but will probably have use elsewhere.
This commit includes the SPI functions and documentation, but no callers
nor regression tests. The upcoming EXECUTE USING patch will provide
regression-test coverage. I thought committing this separately made
sense since it's logically a distinct feature.
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
This requires a working 64-bit integer type. If such a type cannot
be found, "--disable-integer-datetimes" can be used to switch
back to the previous floating point-based datetime implementation.
restore_command should report failure on non-existent .backup and .history
files. Tidy up some related text along the way.
Patch by Markus Bertheau, with some editing by Simon Riggs and myself.
< o Consider invalidating the cache or keeping seperate cached
< copies when search_path changes
> o Consider keeping seperate cached copies when search_path changes
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
errdetail except the string goes only to the server log, replacing the normal
errdetail there. This provides a reasonably clean way of dealing with error
details that are too security-sensitive or too bulky to send to the client.
This commit just adds the infrastructure --- actual uses to follow.
< o Allow pre/data/post files when dumping a single object, for
< performance reasons
> o Allow pre/data/post files when schema and data are dumped
> separately, for performance reasons
except that it returns the string 'NULL', rather than a SQL null, when called
with a null argument. This is often a much more useful behavior for
constructing dynamic queries. Add more discussion to the documentation
about how to use these functions.
Brendan Jurd
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
dumps can be loaded into databases without the same tablespaces that the
source had. The option acts by suppressing all "SET default_tablespace"
commands, and also CREATE TABLESPACE commands in pg_dumpall's case.
Gavin Roy, with documentation and minor fixes by me.
* Experiment with multi-threaded backend better I/O utilization
This would allow a single query to make use of multiple I/O channels
simultaneously. One idea is to create a background reader that can
pre-fetch sequential and index scan pages needed by other backends.
This could be expanded to allow concurrent reads from multiple devices
in a partitioned table.
* Experiment with multi-threaded backend better CPU utilization
This would allow several CPUs to be used for a single query, such as
for sorting or query execution.
* Speed WAL recovery by allowing more than one page to be prefetched
This should be done utilizing the same infrastructure used for
prefetching in general to avoid introducing complex error-prone code
in WAL replay.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
pg_listener modifications commanded by LISTEN and UNLISTEN until the end
of the current transaction. This allows us to hold the ExclusiveLock on
pg_listener until after commit, with no greater risk of deadlock than there
was before. Aside from fixing the race condition, this gets rid of a
truly ugly kludge that was there before, namely having to ignore
HeapTupleBeingUpdated failures during NOTIFY. There is a small potential
incompatibility, which is that if a transaction issues LISTEN or UNLISTEN
and then looks into pg_listener before committing, it won't see any resulting
row insertion or deletion, where before it would have. It seems unlikely
that anyone would be depending on that, though.
This patch also disallows LISTEN and UNLISTEN inside a prepared transaction.
That case had some pretty undesirable properties already, such as possibly
allowing pg_listener entries to be made for PIDs no longer present, so
disallowing it seems like a better idea than trying to maintain the behavior.
o Allow COPY in CSV mode to control whether a quoted zero-length
string is treated as NULL
Currently this is always treated as a zero-length string,
which generates an error when loading into an integer column
>
> * Change memory allocation for multi-byte functions so memory is
> allocated inside conversion functions
>
> Currently we preallocate memory based on worst-case usage.
* Consider increasing the number of default statistics target, and
reduce statistics target overhead
Also consider having a larger statistics target for indexed columns
and expression indexes
<
> http://archives.postgresql.org/pgsql-general/2007-06/msg00542.php
* Consider increasing the number of default statistics target, and
reduce statistics target overhead
Also consider having a larger statistics target for indexed columns
and expression indexes
> http://archives.postgresql.org/pgsql-general/2007-05/msg01228.php
>
>
> * Consider increasing the number of default statistics target, and
> reduce statistics target overhead
>
> Also consider having a larger statistics target for indexed columns
> and expression indexes
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
With the addition of multiple autovacuum workers, our choices were to delete
the check, document the interaction with autovacuum_max_workers, or complicate
the check to try to hide that interaction. Since this restriction has never
been adequate to ensure backends can't run out of pinnable buffers, it doesn't
really have enough excuse to live to justify the second or third choices.
Per discussion of a complaint from Andreas Kling (see also bug #3888).
This commit also removes several documentation references to this restriction,
but I'm not sure I got them all.
>
> * Add comments on system tables/columns using the information in
> catalogs.sgml
>
> Ideally the information would be pulled from the SGML file
> automatically.
>