In case of a partition index, when swapping the old and new index, we
also need to attach the new index as a partition and detach the old
one. Also, to handle partition indexes, we not only need to change
dependencies referencing the index, but also dependencies of the index
referencing something else. The previous code did this only
specifically for a constraint, but we also need to do this for
partitioned indexes. So instead write a generic function that does it
for all dependencies.
Author: Michael Paquier <michael@paquier.xyz>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/DF4PR8401MB11964EDB77C860078C343BEBEE5A0%40DF4PR8401MB1196.NAMPRD84.PROD.OUTLOOK.COM#154df1fedb735190a773481765f7b874
Such calls can confuse the reader as strcmp() uses an integer as result.
The places patched here have been spotted by Thomas Munro, David Rowley
and myself.
Author: Michael Paquier
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20190411021946.GG2728@paquier.xyz
Move the strings, numerology, insert, insert_conflict, select and
errors tests to be parts of nearby parallel groups, instead of
executing by themselves. (Moving "select" required adjusting the
constraints test, which uses a table named "tmp" as select also
does. There don't seem to be any other conflicts.)
Move psql and stats_ext to the next parallel group, where the rules
test also has a long runtime. To make it safe to run stats_ext in
parallel with rules, I adjusted the latter to only dump views/rules
from the pg_catalog and public schemas, which was what it was doing
anyway. stats_ext makes some views in a transient schema, which now
will not affect rules.
Reorder serial_schedule to match parallel_schedule.
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
This test script verifies that KNN searches of an SP-GiST index
produce the same sort order as a seqscan-and-sort. The FULL JOINs
used for that are exceedingly slow, however. Investigation shows
that the problem is that the initial join is on the rank() values,
and we have a lot of duplicates due to the data set containing 1000
duplicate points. We're therefore going to produce 1000000 join
rows that have to be thrown away again by the join filter.
We can improve matters by using row_number() instead of rank(),
so that the initial join keys are unique. The catch is that
that makes the results sensitive to the sorting of rows with
equal distances from the reference point. That doesn't matter
for the actually-equal points, but as luck would have it, the
data set also contains two distinct points that have identical
distances to the origin. So those two rows could legitimately
appear in either order, causing unwanted output from the check
queries.
However, it doesn't seem like it's the job of this test to
check whether the <-> operator correctly computes distances;
its charter is just to verify that SP-GiST emits the values
in distance order. So we can dodge the indeterminacy problem
by having the check only compare row numbers and distances
not the actual point values.
This change reduces the run time of create_index_spgist by a good
three-quarters, on my machine, with ensuing beneficial effects on
the runtime of create_index (thanks to interactions with CREATE
INDEX CONCURRENTLY tests in the latter). I see a net improvement
of more than 2X in the runtime of their parallel test group.
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
The point of this change is to increase the potential for parallelism
while running the core regression tests. Most people these days are
using parallel testing modes on multi-core machines, so we might as
well try a bit harder to keep multiple cores busy. Hence, a test that
runs much longer than others in its parallel group is a candidate to
be sub-divided.
In this patch, create_index.sql and join.sql are split up.
I haven't changed the content of the tests in any way, just
moved them.
I moved create_index.sql's SP-GiST-related tests into a new script
create_index_spgist, and moved its btree multilevel page deletion test
over to the existing script btree_index. (btree_index is a more natural
home for that test, and it's shorter than others in its parallel group,
so this doesn't hurt total runtime of that group.) There might be
room for more aggressive splitting of create_index, but this is enough
to improve matters considerably.
Likewise, I moved join.sql's "exercises for the hash join code" into
a new file join_hash. Those exercises contributed three-quarters of
the script's runtime. Which might well be excessive ... but for the
moment, I'm satisfied with shoving them into a different parallel
group, where they can share runtime with the roughly-equally-lengthy
gist test.
(Note for anybody following along at home: there are interesting
interactions between the runtimes of create_index and anything running
in parallel with it, because the tests of CREATE INDEX CONCURRENTLY
in that file will repeatedly block waiting for concurrent transactions
to commit. As committed in this patch, create_index and
create_index_spgist have roughly equal runtimes, but that's mostly an
artifact of forced synchronization of the CONCURRENTLY tests; when run
serially, create_index is much faster. A followup patch will reduce
the runtime of create_index_spgist and thereby also create_index.)
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
The test for statement timeout has a 2-second timeout, which was only
moderately annoying when it was written, but nowadays it contributes
a pretty significant chunk of the elapsed time needed to run the core
regression tests on a fast machine. We can improve this situation by
pushing the test into a plpgsql-specific test file instead of having
it in a core regression test. That's a clean win when considering
just the core tests. Even when considering check-world or a buildfarm
test run, we should come out ahead because the core tests get run
more times in those sequences.
Furthermore, since the plpgsql tests aren't currently parallelized,
it seems likely that the timing problems reflected in commit f1e671a0b
(which increased that timeout from 1 sec to 2) will be much less severe
in this context. Hence, let's try cutting the timeout back to 1 second
in hopes of a further win for check-world. We can undo that if
buildfarm experience proves it to be a bad idea.
To give the new test file some modicum of intellectual coherency,
I moved the surrounding tests related to error-trapping along with
the statement timeout test proper. Those other tests don't run long
enough to have any particular bearing on test-runtime considerations.
The tests are the same as before, except with minor adjustments to
not depend on an externally-created table.
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
Code coverage comparisons confirm that the tests using
quad_poly_tbl_ord_seq1/quad_poly_tbl_ord_idx1 hit no code
paths not also covered by the similar tests using
quad_poly_tbl_ord_seq2/quad_poly_tbl_ord_idx2. Since these
test cases are pretty expensive, they need to contribute more
than zero benefit.
In passing, make quad_poly_tbl_ord_seq2 a temp table, since
there seems little reason to keep it around after the test.
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
indexing.sql's test for this feature was added along with the
feature in commit 2b2727343. However, shortly later that test was
rendered ineffective by commit 074251db6, which limited when the
optimization would be applied, so that the test didn't test it.
Since then, commit dd299df81 added new tests (in btree_index.sql)
that actually do test the feature. Code coverage comparisons
confirm that this test sequence adds no meaningful coverage, and
it's rather expensive, accounting for nearly half of the runtime
of indexing.sql according to my measurements. So let's remove it.
Per advice from Peter Geoghegan.
Discussion: https://postgr.es/m/735.1554935715@sss.pgh.pa.us
This has to be prevented because inlining would result in multiple
self-references, which we don't support (and in fact that's disallowed
by the SQL spec, see statements about linearly vs. nonlinearly
recursive queries). Bug fix for commit 608b167f9.
Per report from Yaroslav Schekin (via Andrew Gierth)
Discussion: https://postgr.es/m/87wolmg60q.fsf@news-spur.riddles.org.uk
We weren't testing anything involving EPQ on UPDATEs that move tuples
into different partitions. Depending on the implementation,
it might be that these cases aren't actually very interesting ...
but given our thin coverage of EPQ in general, I think it's a good
idea to have a test case.
Amit Langote, minor tweak by me
Discussion: https://postgr.es/m/7889df35-ad1a-691a-00e3-4d4b18f364e3@lab.ntt.co.jp
join_is_legal() needs to reject forming certain outer joins in cases
where that would lead the planner down a blind alley. However, it
mistakenly supposed that the way to handle full joins was to treat them
as applying the same constraints as for left joins, only to both sides.
That doesn't work, as shown in bug #15741 from Anthony Skorski: given
a lateral reference out of a join that's fully enclosed by a full join,
the code would fail to believe that any join ordering is legal, resulting
in errors like "failed to build any N-way joins".
However, we don't really need to consider full joins at all for this
purpose, because we effectively force them to be evaluated in syntactic
order, and that order is always legal for lateral references. Hence,
get rid of this broken logic for full joins and just ignore them instead.
This seems to have been an oversight in commit 7e19db0c0.
Back-patch to all supported branches, as that was.
Discussion: https://postgr.es/m/15741-276f1f464b3f40eb@postgresql.org
vacuum_truncate controls whether vacuum tries to truncate off
any empty pages at the end of the table. Previously vacuum always
tried to do the truncation. However, the truncation could cause
some problems; for example, ACCESS EXCLUSIVE lock needs to
be taken on the table during the truncation and can cause
the query cancellation on the standby even if hot_standby_feedback
is true. Setting this reloption to false can be helpful to avoid
such problems.
Author: Tsunakawa Takayuki
Reviewed-By: Julien Rouhaud, Masahiko Sawada, Michael Paquier, Kirk Jamison and Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE5UqFqSq1=kV3QtTUtXphTdyHA-8rAj4A=Y+e4kyp3BQ@mail.gmail.com
This commit fixes three, unfortunately related, issues:
1) Since 5db6df0c01, the introduction of DML via tableam, it was
possible to trigger "ERROR: unexpected table_lock_tuple status: 1"
when updating a row that was previously updated in the same
transaction - but only when the previously updated row was before
updated in a concurrent transaction (and READ COMMITTED was
used). The reason for that was that that case simply wasn't
expected. Fixing that lead to:
2) Even before the above commit, there were error checks (introduced
in 6868ed7491) preventing a row being updated by different
commands within the same statement (say in a function called by an
UPDATE) - but that check wasn't performed when the row was first
updated in a concurrent transaction - instead the second update was
silently skipped in that case. After this change we throw the same
error as we'd without the concurrent transaction.
3) The error messages (introduced in 6868ed7491) preventing such
updates emitted the same error message for both DELETE and
UPDATE ("tuple to be updated was already modified by an operation
triggered by the current command"). While that could be changed
separately, it made it hard to write tests that verify the correct
correct behavior of the code.
This commit changes heap's implementation of table_lock_tuple() to
return TM_SelfModified instead of TM_Invisible (previously loosely
modeled after EvalPlanQualFetch), and teaches nodeModifyTable.c to
handle that in response to table_lock_tuple() and not just in response
to table_(delete|update).
Additionally it fixes the wrong error message (see 3 above). The
comment for table_lock_tuple() is also adjusted to state that
TM_Deleted won't return information in TM_FailureData - it'll not
always be available.
This also adds tests to ensure that DELETE/UPDATE correctly error out
when affecting a row that concurrently was modified by another
transaction.
Author: Andres Freund
Reported-By: Tom Lane, when investigating a bug bug fix to another bug
by Amit Langote
Discussion: https://postgr.es/m/19321.1554567786@sss.pgh.pa.us
As bug #15733 has proved, we are lacking coverage for partition tuple
routing with dropped attributes when involving three levels of
partitioning or more. There was only an active bug in this area for
v11, and HEAD is proving to handle those scenarios fine, still it lacked
some coverage for the previous problem.
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/15733-7692379e310b80ec@postgresql.org
The new command lists partitioned relations (tables and/or indexes),
possibly with their sizes, possibly including partitioned partitions;
their parents (if not top-level); if indexes show the tables they belong
to; and their descriptions.
While there are various possible improvements to this, having it in this
form is already a great improvement over not having any way to obtain
this report.
Author: Pavel Stěhule, with help from Mathias Brossard, Amit Langote and
Justin Pryzby.
Reviewed-by: Amit Langote, Mathias Brossard, Melanie Plageman,
Michaël Paquier, Álvaro Herrera
Before those commits, partitioning-related code in the executor could
assume that ModifyTableState.resultRelInfo[] contains only leaf partitions.
However, now a fully-pruned update results in a dummy ModifyTable that
references the root partitioned table, and that breaks some stuff.
In v11, this led to an assertion or core dump in the tuple routing code.
Fix by disabling tuple routing, since we don't need that anyway.
(I chose to do that in HEAD as well for safety, even though the problem
doesn't manifest in HEAD as it stands.)
In v10, this confused ExecInitModifyTable's decision about whether it
needed to close the root table. But we can get rid of that altogether
by being smarter about where to find the root table.
Note that since the referenced commits haven't shipped yet, this
isn't fixing any bug the field has seen.
Amit Langote, per a report from me
Discussion: https://postgr.es/m/20710.1554582479@sss.pgh.pa.us
This uses the same infrastructure that the CREATE INDEX progress
reporting uses. Add a column to pg_stat_progress_create_index to
report the OID of the index being worked on. This was not necessary
for CREATE INDEX, but it's useful for REINDEX.
Also edit the phase descriptions a bit to be more consistent with the
source code comments.
Discussion: https://www.postgresql.org/message-id/ef6a6757-c36a-9e81-123f-13b19e36b7d7%402ndquadrant.com
The foreign-key-checking loop in ATRewriteTables failed to ignore
relations without storage (e.g., partitioned tables), unlike the
initial loop. This accidentally worked as long as RI_Initial_Check
succeeded, which it does in most practical cases (including all the
ones exercised in the existing regression tests :-(). However, if
that failed, as for instance when there are permissions issues,
then we entered the slow fire-the-trigger-on-each-tuple path.
And that would try to read from the referencing relation, and fail
if it lacks storage.
A second problem, recently introduced in HEAD, was that this loop
had been broken by sloppy refactoring for the tableam API changes.
Repair both issues, and add a regression test case so we have some
coverage on this code path. Back-patch as needed to v11.
(It looks like this code could do with additional bulletproofing,
but let's get a working test case in place first.)
Hadi Moshayedi, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/CAK=1=WrnNmBbe5D9sm3t0a6dnAq3cdbF1vXY816j1wsMqzC8bw@mail.gmail.com
Discussion: https://postgr.es/m/19030.1554574075@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190325180405.jytoehuzkeozggxx%40alap3.anarazel.de
If we need ordered output from a scan of a partitioned table, but
the ordering matches the partition ordering, then we don't need to
use a MergeAppend to combine the pre-ordered per-partition scan
results: a plain Append will produce the same results. This
both saves useless comparison work inside the MergeAppend proper,
and allows us to start returning tuples after istarting up just
the first child node not all of them.
However, all is not peaches and cream, because if some of the
child nodes have high startup costs then there will be big
discontinuities in the tuples-returned-versus-elapsed-time curve.
The planner's cost model cannot handle that (yet, anyway).
If we model the Append's startup cost as being just the first
child's startup cost, we may drastically underestimate the cost
of fetching slightly more tuples than are available from the first
child. Since we've had bad experiences with over-optimistic choices
of "fast start" plans for ORDER BY LIMIT queries, that seems scary.
As a klugy workaround, set the startup cost estimate for an ordered
Append to be the sum of its children's startup costs (as MergeAppend
would). This doesn't really describe reality, but it's less likely
to cause a bad plan choice than an underestimated startup cost would.
In practice, the cases where we really care about this optimization
will have child plans that are IndexScans with zero startup cost,
so that the overly conservative estimate is still just zero.
David Rowley, reviewed by Julien Rouhaud and Antonin Houska
Discussion: https://postgr.es/m/CAKJS1f-hAqhPLRk_RaSFTgYxd=Tz5hA7kQ2h4-DhJufQk8TGuw@mail.gmail.com
Previously it was allowed to set default_table_access_method to an
empty string. That makes sense for default_tablespace, where that was
copied from, as it signals falling back to the database's default
tablespace. As there is no equivalent for table AMs, forbid that.
Also make sure to throw a usable error when creating a table using an
index AM, by using get_am_type_oid() to implement get_table_am_oid()
instead of a separate copy. Previously we'd error out only later, in
GetTableAmRoutine().
Thirdly remove GetTableAmRoutineByAmId() - it was only used in an
earlier version of 8586bf7ed8.
Add tests for the above (some for index AMs as well).
Commit c1afd175, which added support for rootdescend verification to
amcheck, added only minimal regression test coverage. Address this by
making sure that rootdescend verification is run on a multi-level index.
In passing, simplify some of the regression tests that exercise
multi-level nbtree page deletion.
Both issues spotted while rereviewing coverage of the nbtree patch
series using gcov.
This is intended for use mostly in test scripts for external tools,
which could do without cross-PG-version variations in error message
wording. Of course, the SQLSTATE isn't guaranteed stable either, but
it should be more so than the error message text.
Note: there's a bit of an ABI change for libpq here, but it seems
OK because if somebody compiles against a newer version of libpq-fe.h,
and then tries to pass PQERRORS_SQLSTATE to PQsetErrorVerbosity()
of an older libpq library, it will be accepted and then act like
PQERRORS_DEFAULT, thanks to the way the tests in pqBuildErrorMessage3
have historically been phrased. That seems acceptable.
Didier Gautheron, reviewed by Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CAJRYxuKyj4zA+JGVrtx8OWAuBfE-_wN4sUMK4H49EuPed=mOBw@mail.gmail.com
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
Buildfarm members idiacanthus and komodoensis, which share a host, both
executed this test in the same second. That failed. Back-patch to 9.6,
where the test first appeared.
Discussion: https://postgr.es/m/20190404020543.GA1319573@rfd.leadboat.com
c251336 has added some tests to check if a toast relation should be
empty or not, hardcoding the toast relation name when calling
pg_relation_size(). pg_class.reltoastrelid offers the same information,
so simplify the tests to use that.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190403065949.GH3298@paquier.xyz
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
Previously, while primary keys could be made on partitioned tables, it
was not possible to define foreign keys that reference those primary
keys. Now it is possible to do that.
Author: Álvaro Herrera
Reviewed-by: Amit Langote, Jesper Pedersen
Discussion: https://postgr.es/m/20181102234158.735b3fevta63msbj@alvherre.pgsql
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
When accessing a table with RLS via a view, the RLS checks are
performed as the view owner. However, the code neglected to propagate
that to any subqueries in the RLS checks. Fix that by calling
setRuleCheckAsUser() for all RLS policy quals and withCheckOption
checks for RTEs with RLS.
Back-patch to 9.5 where RLS was added.
Per bug #15708 from daurnimator.
Discussion: https://postgr.es/m/15708-d65cab2ce9b1717a@postgresql.org
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
jsonb_path_match() checks if jsonb document matches jsonpath query. Therefore,
jsonpath query should return single boolean. Currently, if result of jsonpath
is not a single boolean, NULL is returned independently whether silent mode
is on or off. But that appears to be wrong when silent mode is off. This
commit makes jsonb_path_match() throw an error in this case.
Author: Nikita Glukhov
Jsonpath now accepts integers with leading zeroes and floats starting with
a dot. However, SQL standard requires to follow JSON specification, which
doesn't allow none of these cases. Our json[b] datatypes also restrict that.
So, restrict it in jsonpath altogether.
Author: Nikita Glukhov
This commit makes existing GIN operator classes jsonb_ops and json_path_ops
support "jsonb @@ jsonpath" and "jsonb @? jsonpath" operators. Basic idea is
to extract statements of following form out of jsonpath.
key1.key2. ... .keyN = const
The rest of jsonpath is rechecked from heap.
Catversion is bumped.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Nikita Glukhov, Alexander Korotkov
Reviewed-by: Jonathan Katz, Pavel Stehule
The syntax
GENERATED BY DEFAULT AS (expr)
is not allowed but we have to accept it in the grammar to avoid
shift/reduce conflicts because of the similar syntax for identity
columns. The existing code just ignored this, incorrectly. Add an
explicit error check and a bespoke error message.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Commit 29b64d1d mishandled skipping over truncated high key attributes
during row comparisons. The row comparison key matching loop would loop
forever when a truncated attribute was encountered for a row compare
subkey. Fix by following the example of other code in the loop: advance
the current subkey, or break out of the loop when the last subkey is
reached.
Add test coverage for the relevant _bt_check_rowcompare() code path.
The new test case is somewhat tied to nbtree implementation details,
which isn't ideal, but seems unavoidable.
There was some debate about whether the code I'd added to remap
AppendRelInfos obtained from the initial SELECT planning run is
actually necessary. Add a test case demonstrating that it is.
Discussion: https://postgr.es/m/23831.1553873385@sss.pgh.pa.us
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
While trying to plan a partitionwise join, we may be faced with cases
where one or both input partitions for a particular segment of the join
have been pruned away. In HEAD and v11, this is problematic because
earlier processing didn't bother to make a pruned RelOptInfo fully
valid. With an upcoming patch to make partition pruning more efficient,
this'll be even more problematic because said RelOptInfo won't exist at
all.
The existing code attempts to deal with this by retroactively making the
RelOptInfo fully valid, but that causes crashes under GEQO because join
planning is done in a short-lived memory context. In v11 we could
probably have fixed this by switching to the planner's main context
while fixing up the RelOptInfo, but that idea doesn't scale well to the
upcoming patch. It would be better not to mess with the base-relation
data structures during join planning, anyway --- that's just a recipe
for order-of-operations bugs.
In many cases, though, we don't actually need the child RelOptInfo,
because if the input is certainly empty then the join segment's result
is certainly empty, so we can skip making a join plan altogether. (The
existing code ultimately arrives at the same conclusion, but only after
doing a lot more work.) This approach works except when the pruned-away
partition is on the nullable side of a LEFT, ANTI, or FULL join, and the
other side isn't pruned. But in those cases the existing code leaves a
lot to be desired anyway --- the correct output is just the result of
the unpruned side of the join, but we were emitting a useless outer join
against a dummy Result. Pending somebody writing code to handle that
more nicely, let's just abandon the partitionwise-join optimization in
such cases.
When the modified code skips making a join plan, it doesn't make a
join RelOptInfo either; this requires some upper-level code to
cope with nulls in part_rels[] arrays. We would have had to have
that anyway after the upcoming patch.
Back-patch to v11 since the crash is demonstrable there.
Discussion: https://postgr.es/m/8305.1553884377@sss.pgh.pa.us
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
This adds the CONCURRENTLY option to the REINDEX command. A REINDEX
CONCURRENTLY on a specific index creates a new index (like CREATE
INDEX CONCURRENTLY), then renames the old index away and the new index
in place and adjusts the dependencies, and then drops the old
index (like DROP INDEX CONCURRENTLY). The REINDEX command also has
the capability to run its other variants (TABLE, DATABASE) with the
CONCURRENTLY option (but not SYSTEM).
The reindexdb command gets the --concurrently option.
Author: Michael Paquier, Andreas Karlsson, Peter Eisentraut
Reviewed-by: Andres Freund, Fujii Masao, Jim Nasby, Sergei Kornilov
Discussion: https://www.postgresql.org/message-id/flat/60052986-956b-4478-45ed-8bd119e9b9cf%402ndquadrant.com#74948a1044c56c5e817a5050f554ddee
Introduce a third extended statistic type, supported by the CREATE
STATISTICS command - MCV lists, a generalization of the statistic
already built and used for individual columns.
Compared to the already supported types (n-distinct coefficients and
functional dependencies), MCV lists are more complex, include column
values and allow estimation of much wider range of common clauses
(equality and inequality conditions, IS NULL, IS NOT NULL etc.).
Similarly to the other types, a new pseudo-type (pg_mcv_list) is used.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed, David Rowley, Mark Dilger, Alvaro Herrera
Discussion: https://postgr.es/m/dfdac334-9cf2-2597-fb27-f0fb3753f435@2ndquadrant.com
Column references are not allowed in default expressions and partition
bound expressions, and are restricted as such once the transformation of
their expressions is done. However, trying to use more complex column
references can lead to confusing error messages. For example, trying to
use a two-field column reference name for default expressions and
partition bounds leads to "missing FROM-clause entry for table", which
makes no sense in their respective context.
In order to make the errors generated more useful, this commit adds more
verbose messages when transforming column references depending on the
context. This has a little consequence though: for example an
expression using an aggregate with a column reference as argument would
cause an error to be generated for the column reference, while the
aggregate was the problem reported before this commit because column
references get transformed first.
The confusion exists for default expressions for a long time, and the
problem is new as of v12 for partition bounds. Still per the lack of
complaints on the matter no backpatch is done.
The patch has been written by Amit Langote and me, and Tom Lane has
provided the improvement of the documentation for default expressions on
the CREATE TABLE page.
Author: Amit Langote, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190326020853.GM2558@paquier.xyz
When invoked for the first time in a session, current_schema() and
current_schemas() can finish by creating a temporary schema. Currently
those functions are parallel-safe, however if for a reason or another
they get launched across multiple parallel workers, they would fail when
attempting to create a temporary schema as temporary contexts are not
supported in this case.
The original issue has been spotted by buildfarm members crake and
lapwing, after commit c5660e0 has introduced the first regression tests
based on current_schema() in the tree. After that, 396676b has
introduced a workaround to avoid parallel plans but that was not
completely right either.
Catversion is bumped.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20190118024618.GF1883@paquier.xyz
ALTER INDEX .. ATTACH PARTITION fails if the partitioned table where the
index is defined contains more dropped columns than its partition, with
this message:
ERROR: incorrect attribute map
The cause was that one caller of CompareIndexInfo was passing the number
of attributes of the partition rather than the parent, which confused
the length check. Repair.
This can cause pg_upgrade to fail when used on such a database. Leave
some more objects around after regression tests, so that the case is
detected by pg_upgrade test suite.
Remove some spurious empty lines noticed while looking for other cases
of the same problem.
Discussion: https://postgr.es/m/20190326213924.GA2322@alvherre.pgsql
When used on a partition containing foreign keys coming from one of its
ancestors, \d would (rather unhelpfully) print the details about the
pg_constraint row in the partition. This becomes a bit frustrating when
the user tries things like dropping the FK in the partition; instead,
show the details for the foreign key on the table where it is defined.
Also, when a table is referenced by a foreign key on a partitioned
table, we would show multiple "Referenced by" lines, one for each
partition, which gets unwieldy pretty fast. Modify that so that it
shows only one line for the ancestor partitioned table where the FK is
defined.
Discussion: https://postgr.es/m/20181204143834.ym6euxxxi5aeqdpn@alvherre.pgsql
Reviewed-by: Tom Lane, Amit Langote, Peter Eisentraut
Since 7c079d7, partition bounds are able to use generalized expression
syntax when processed, treating "minvalue" and "maxvalue" as specific
cases as they get passed down for transformation as a column references.
The checks for infinite bounds in range expressions have been lax
though, causing crashes when trying to use column reference names with
more than one field. Here is an example causing a crash:
CREATE TABLE list_parted (a int) PARTITION BY LIST (a);
CREATE TABLE part_list_crash PARTITION OF list_parted
FOR VALUES IN (somename.somename);
Note that the creation of the second relation should fail as partition
bounds cannot have column references in their expressions, so when
finding an expression which does not match the expected infinite bounds,
then this commit lets the generic transformation machinery check after
it. The error message generated in this case references as well a
missing RTE, which is confusing. This problem will be treated
separately as it impacts as well default expressions for some time, and
for now only the cases where a crash can happen are fixed.
While on it, extend the set of regression tests in place for list
partition bounds and add an extra set for range partition bounds.
Reported-by: Alexander Lakhin
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/15668-0377b1981aa1a393@postgresql.org
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
This uses the same progress reporting infrastructure added in commit
c16dc1aca5 and extends it to these
additional cases. We lack the ability to track the internal progress
of sorts and index builds so the information reported is
coarse-grained for some parts of the operation, but it still seems
like a significant improvement over having nothing at all.
Tatsuro Yamada, reviewed by Thomas Munro, Masahiko Sawada, Michael
Paquier, Jeff Janes, Alvaro Herrera, Rafia Sabih, and by me. A fair
amount of polishing also by me.
Discussion: http://postgr.es/m/59A77072.3090401@lab.ntt.co.jp
Non-backtracking flex parsers work faster than backtracking ones. So, this
commit gets rid of backtracking in jsonpath_scan.l. That required explicit
handling of some cases as well as manual backtracking for some cases. More
regression tests for numerics are added.
Discussion: https://mail.google.com/mail/u/0?ik=a20b091faa&view=om&permmsgid=msg-f%3A1628425344167939063
Author: John Naylor, Nikita Gluknov, Alexander Korotkov
Coverity complained that simple8b_encode() might read beyond the end of
the 'diffs' array, in the loop to encode the integers. That was a false
positive, because we never get into the loop in modes 0 or 1, and the
array is large enough for all the other modes. But I admit it's very
subtle, so it's not surprising that Coverity didn't see it, and it's not
very obvious to humans either. Refactor it, so that the second loop
re-computes the differences, instead of carrying them over from the first
loop in the 'diffs' array. This way, the 'diffs' array is not needed
anymore. It makes no measurable difference in performance, and seems more
straightforward this way.
Also, improve the comments in simple8b_encode(): fix the comment about its
return value that was flat-out wrong, and explain the condition when it
returns EMPTY_CODEWORD better.
In the passing, move the 'selector' from the codeword's low bits to the
high bits. It doesn't matter much, but looking at the original paper, and
googling around for other Simple-8b implementations, that's how it's
usually done.
Per Coverity, and Tom Lane's report off-list.
Now that the ordering of DROP messages ought to be stable everywhere,
we should not need these kluges of hiding DETAIL output just to avoid
unstable ordering. Hiding it's not great for test coverage, so
let's undo that where possible.
In a small number of places, it's necessary to leave it in, for
example because the output might include a variable pg_temp_nnn
schema name. I also left things alone in places where the details
would depend on other regression test scripts, e.g. plpython_drop.sql.
Perhaps buildfarm experience will show this to be a bad idea,
but if so I'd like to know why.
Discussion: https://postgr.es/m/E1h6eep-0001Mw-Vd@gemulon.postgresql.org
Commit 8aa9dd74b didn't quite finish the job in this area after all,
because DROP ROLE has a code path distinct from DROP OWNED BY, and
it was still reporting dependent objects in whatever order the index
scan returned them in.
Buildfarm experience shows that index ordering of equal-keyed objects is
significantly less stable than before in the wake of using heap TIDs as
tie-breakers. So if we try to hide the unstable ordering by suppressing
DETAIL reports, we're just going to end up having to do that for every
DROP that reports multiple objects. That's not great from a coverage
or problem-detection standpoint, and it's something we'll inevitably
forget in future patches, leading to more iterations of fixing-an-
unstable-result. So let's just bite the bullet and sort here too.
Discussion: https://postgr.es/m/E1h6eep-0001Mw-Vd@gemulon.postgresql.org
Add command variants COMMIT AND CHAIN and ROLLBACK AND CHAIN, which
start new transactions with the same transaction characteristics as the
just finished one, per SQL standard.
Support for transaction chaining in PL/pgSQL is also added. This
functionality is especially useful when running COMMIT in a loop in
PL/pgSQL.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/28536681-324b-10dc-ade8-ab46f7645a5a@2ndquadrant.com
This adds new, required, table AM callbacks for insert/delete/update
and lock_tuple. To be able to reasonably use those, the EvalPlanQual
mechanism had to be adapted, moving more logic into the AM.
Previously both delete/update/lock call-sites and the EPQ mechanism had
to have awareness of the specific tuple format to be able to fetch the
latest version of a tuple. Obviously that needs to be abstracted
away. To do so, move the logic that find the latest row version into
the AM. lock_tuple has a new flag argument,
TUPLE_LOCK_FLAG_FIND_LAST_VERSION, that forces it to lock the last
version, rather than the current one. It'd have been possible to do
so via a separate callback as well, but finding the last version
usually also necessitates locking the newest version, making it
sensible to combine the two. This replaces the previous use of
EvalPlanQualFetch(). Additionally HeapTupleUpdated, which previously
signaled either a concurrent update or delete, is now split into two,
to avoid callers needing AM specific knowledge to differentiate.
The move of finding the latest row version into tuple_lock means that
encountering a row concurrently moved into another partition will now
raise an error about "tuple to be locked" rather than "tuple to be
updated/deleted" - which is accurate, as that always happens when
locking rows. While possible slightly less helpful for users, it seems
like an acceptable trade-off.
As part of this commit HTSU_Result has been renamed to TM_Result, and
its members been expanded to differentiated between updating and
deleting. HeapUpdateFailureData has been renamed to TM_FailureData.
The interface to speculative insertion is changed so nodeModifyTable.c
does not have to set the speculative token itself anymore. Instead
there's a version of tuple_insert, tuple_insert_speculative, that
performs the speculative insertion (without requiring a flag to signal
that fact), and the speculative insertion is either made permanent
with table_complete_speculative(succeeded = true) or aborted with
succeeded = false).
Note that multi_insert is not yet routed through tableam, nor is
COPY. Changing multi_insert requires changes to copy.c that are large
enough to better be done separately.
Similarly, although simpler, CREATE TABLE AS and CREATE MATERIALIZED
VIEW are also only going to be adjusted in a later commit.
Author: Andres Freund and Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190313003903.nwvrxi7rw3ywhdel@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Previously we were using the SQL:2003 definition, which doesn't allow
this, but that creates a serious dump/restore gotcha: there is no
setting of xmloption that will allow all valid XML data. Hence,
switch to the 2006 definition.
Since libxml doesn't accept <!DOCTYPE> directives in the mode we
use for CONTENT parsing, the implementation is to detect <!DOCTYPE>
in the input and switch to DOCUMENT parsing mode. This should not
cost much, because <!DOCTYPE> should be close to the front of the
input if it's there at all. It's possible that this causes the
error messages for malformed input to be slightly different than
they were before, if said input includes <!DOCTYPE>; but that does
not seem like a big problem.
In passing, buy back a few cycles in parsing of large XML documents
by not doing strlen() of the whole input in parse_xml_decl().
Back-patch because dump/restore failures are not nice. This change
shouldn't break any cases that worked before, so it seems safe to
back-patch.
Chapman Flack (revised a bit by me)
Discussion: https://postgr.es/m/CAN-V+g-6JqUQEQZ55Q3toXEN6d5Ez5uvzL4VR+8KtvJKj31taw@mail.gmail.com
Suppress 3 lines of unstable DETAIL output from a DROP ROLE statement in
event_trigger.sql. This is further cleanup for commit dd299df8.
Note that the event_trigger test instability issue is very similar to
the recently suppressed foreign_data test instability issue. Both
issues involve DETAIL output for a DROP ROLE statement that needed to be
changed as part of dd299df8.
Per buildfarm member macaque.
Previously there was basically no coverage for UPDATEs encountering
deleted rows, and no coverage for DELETE having to perform EPQ. That's
problematic for an upcoming commit in which EPQ is tought to integrate
with tableams. Also, there was no test for UPDATE to encounter a row
UPDATEd into another partition.
Author: Andres Freund
This is almost a straight revert of commit fff518d, which itself was a
revert of 7d3bf73ac.
It turns out that commit 8aa9dd74, which sorted dependent objects before
deletion in DROP OWNED BY, was not sufficient to make all remaining
unstable DETAIL output stable. Unstable DETAIL output from DROP ROLE
was not affected, because that happens to use a different code path. It
doesn't seem worthwhile to fix the other code path at this time.
Discussion: https://postgr.es/m/6226.1553274783@sss.pgh.pa.us
There were more large constants that needed UINT64CONST. And one variable
was declared as "int", when it needed to be uint64. These bugs were only
visible on 32-bit systems; clearly I should've tested on one, given that
this code does a lot of work with 64-bit integers.
Also, in the test "huge distances" test, the code created some values with
random distances between them, but the test logic didn't take into account
the possibility that the random distance was exactly 1. That never actually
happens with the seed we're using, but let's be tidy.
Buildfarm member 'woodlouse' failed one of the tests, and I'm not sure
which test failed. Better to print the names of the tests, so that it
will appear in the regression.diffs on failure.
To do this, we scan GiST two times. In the first pass we make note of
empty leaf pages and internal pages. At second pass we scan through
internal pages, looking for downlinks to the empty pages.
Deleting internal pages is still not supported, like in nbtree, the last
child of an internal page is never deleted. That means that if you have a
workload where new keys are always inserted to different area than where
old keys are removed, the index will still grow without bound. But the rate
of growth will be an order of magnitude slower than before.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/B1E4DF12-6CD3-4706-BDBD-BF3283328F60@yandex-team.ru
The set is implemented as a B-tree, with a compact representation at leaf
items, using Simple-8b algorithm, so that clusters of nearby values use
less memory.
The IntegerSet isn't used for anything yet, aside from the test code, but
we have two patches in the works that would benefit from this: A patch to
allow GiST vacuum to delete empty pages, and a patch to reduce heap
VACUUM's memory usage, by storing the list of dead TIDs more efficiently
and lifting the 1 GB limit on its size.
This includes a unit test module, in src/test/modules/test_integerset.
It can be used to verify correctness, as a regression test, but if you run
it manully, it can also print memory usage and execution time of some of
the tests.
Author: Heikki Linnakangas, Andrey Borodin
Reviewed-by: Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/b5e82599-1966-5783-733c-1a947ddb729f@iki.fi
This adds a flag "deterministic" to collations. If that is false,
such a collation disables various optimizations that assume that
strings are equal only if they are byte-wise equal. That then allows
use cases such as case-insensitive or accent-insensitive comparisons
or handling of strings with different Unicode normal forms.
This functionality is only supported with the ICU provider. At least
glibc doesn't appear to have any locales that work in a
nondeterministic way, so it's not worth supporting this for the libc
provider.
The term "deterministic comparison" in this context is from Unicode
Technical Standard #10
(https://unicode.org/reports/tr10/#Deterministic_Comparison).
This patch makes changes in three areas:
- CREATE COLLATION DDL changes and system catalog changes to support
this new flag.
- Many executor nodes and auxiliary code are extended to track
collations. Previously, this code would just throw away collation
information, because the eventually-called user-defined functions
didn't use it since they only cared about equality, which didn't
need collation information.
- String data type functions that do equality comparisons and hashing
are changed to take the (non-)deterministic flag into account. For
comparison, this just means skipping various shortcuts and tie
breakers that use byte-wise comparison. For hashing, we first need
to convert the input string to a canonical "sort key" using the ICU
analogue of strxfrm().
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/1ccc668f-4cbc-0bef-af67-450b47cdfee7@2ndquadrant.com
Trying to call the function with the top-most parent of a partition tree
was leading to a crash. In this case the correct result is to return
the top-most parent itself.
Reported-by: Álvaro Herrera
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20190322032612.GA323@alvherre.pgsql
When DefineIndex recurses to create constraints on partitions, it needs
to use the value returned by index_constraint_create to set up partition
dependencies. However, in the course of fixing the DEPENDENCY_INTERNAL_AUTO
mess, commit 1d92a0c9f7 introduced some code to that function that
clobbered the return value, causing the recorded OID to be of the wrong
object. Close examination of pg_depend after creating the tables leads
to indescribable objects :-( My sin (in commit bdc3d7fa23, while
preparing for DDL deparsing in event triggers) was to use a variable
name for the return value that's typically used for throwaway objects in
dependency-setting calls ("referenced"). Fix by changing the variable
names to match extended practice (the return value is "myself" rather
than "referenced".)
The pg_upgrade test notices the problem (in an indirect way: the pg_dump
outputs are in different order), but only if you create the objects in a
specific way that wasn't being used in the existing tests. Add a stanza
to leave some objects around that shows the bug.
Catversion bump because preexisting databases might have bogus pg_depend
entries.
Discussion: https://postgr.es/m/20190318204235.GA30360@alvherre.pgsql
These commands allow the argument type list to be omitted if there is
just one object that matches by name. However, if that syntax was
used with DROP IF EXISTS and there was more than one match, you got
a "function ... does not exist, skipping" notice message rather than a
truthful complaint about the ambiguity. This was basically due to
poor factorization and a rats-nest of logic, so refactor the relevant
lookup code to make it cleaner.
Note that this amounts to narrowing the scope of which sorts of
error conditions IF EXISTS will bypass. Per discussion, we only
intend it to skip no-such-object cases, not multiple-possible-matches
cases.
Per bug #15572 from Ash Marath. Although this definitely seems like
a bug, it's not clear that people would thank us for changing the
behavior in minor releases, so no back-patch.
David Rowley, reviewed by Julien Rouhaud and Pavel Stehule
Discussion: https://postgr.es/m/15572-ed1b9ed09503de8a@postgresql.org
Unstable sort order related to changes to nbtree from commit dd299df8
can cause two lines of DETAIL output to be in opposite-of-expected
order. Suppress the output using the same VERBOSITY hack that is used
elsewhere in the foreign_data tests.
Note that the same foreign_data.out DETAIL output was mechanically
updated by commit dd299df8. Only a few such changes were required,
though.
Per buildfarm member batfish.
Discussion: https://postgr.es/m/CAH2-WzkCQ_MtKeOpzozj7QhhgP1unXsK8o9DMAFvDqQFEPpkYQ@mail.gmail.com
Make nbtree treat all index tuples as having a heap TID attribute.
Index searches can distinguish duplicates by heap TID, since heap TID is
always guaranteed to be unique. This general approach has numerous
benefits for performance, and is prerequisite to teaching VACUUM to
perform "retail index tuple deletion".
Naively adding a new attribute to every pivot tuple has unacceptable
overhead (it bloats internal pages), so suffix truncation of pivot
tuples is added. This will usually truncate away the "extra" heap TID
attribute from pivot tuples during a leaf page split, and may also
truncate away additional user attributes. This can increase fan-out,
especially in a multi-column index. Truncation can only occur at the
attribute granularity, which isn't particularly effective, but works
well enough for now. A future patch may add support for truncating
"within" text attributes by generating truncated key values using new
opclass infrastructure.
Only new indexes (BTREE_VERSION 4 indexes) will have insertions that
treat heap TID as a tiebreaker attribute, or will have pivot tuples
undergo suffix truncation during a leaf page split (on-disk
compatibility with versions 2 and 3 is preserved). Upgrades to version
4 cannot be performed on-the-fly, unlike upgrades from version 2 to
version 3. contrib/amcheck continues to work with version 2 and 3
indexes, while also enforcing stricter invariants when verifying version
4 indexes. These stricter invariants are the same invariants described
by "3.1.12 Sequencing" from the Lehman and Yao paper.
A later patch will enhance the logic used by nbtree to pick a split
point. This patch is likely to negatively impact performance without
smarter choices around the precise point to split leaf pages at. Making
these two mostly-distinct sets of enhancements into distinct commits
seems like it might clarify their design, even though neither commit is
particularly useful on its own.
The maximum allowed size of new tuples is reduced by an amount equal to
the space required to store an extra MAXALIGN()'d TID in a new high key
during leaf page splits. The user-facing definition of the "1/3 of a
page" restriction is already imprecise, and so does not need to be
revised. However, there should be a compatibility note in the v12
release notes.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas, Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-WzkVb0Kom=R+88fDFb=JSxZMFvbHVC6Mn9LJ2n=X=kS-Uw@mail.gmail.com
There are 2-arguments and 4-arguments versions of jsonb_path_match() and
jsonb_path_exists(). But 4-arguments versions have optional 3rd and 4th
arguments, that leads to ambiguity. In the same time 2-arguments versions are
needed only for @@ and @? operators. So, rename 2-arguments versions to
remove the ambiguity.
Catversion is bumped.
Unrecognized attribute names are supposed to be ignored. But the code
would error out on an unrecognized attribute value even if it did not
recognize the attribute name. So unrecognized attributes wouldn't
really be ignored unless the value happened to be one that matched a
recognized value. This would break some important cases where the
attribute would be processed by ucol_open() directly. Fix that and
add a test case.
The restructured code should also avoid compiler warnings about
initializing a UColAttribute value to -1, because the type might be an
unsigned enum. (reported by Andres Freund)
Aggregates have acquired a dozen or so optional attributes in recent
years for things like parallel query and moving-aggregate mode; the
lack of an OR REPLACE option to add or change these for an existing
agg makes extension upgrades gratuitously hard. Rectify.
Like commit f41551f61f, this aims
to make it easier to add non-Boolean options to VACUUM (or, in
this case, to ANALYZE). Instead of building up a bitmap of
options directly in the parser, build up a list of DefElem
objects and let ExecVacuum() sort it out; right now, we make
no use of the fact that a DefElem can carry an associated value,
but it will be easy to make that change in the future.
Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoATE4sn0jFFH3NcfUZXkU2BMbjBWB_kDj-XWYA-LXDcQA@mail.gmail.com
In RI_FKey_pk_upd_check_required(), we check among other things
whether the old and new key are equal, so that we don't need to run
cascade actions when nothing has actually changed. This was using the
equality operator. But the effect of this is that if a value in the
primary key is changed to one that "looks" different but compares as
equal, the update is not propagated. (Examples are float -0 and 0 and
case-insensitive text.) This appears to violate the SQL standard, and
it also behaves inconsistently if in a multicolumn key another key is
also updated that would cause the row to compare as not equal.
To fix, if we are looking at the PK table in ri_KeysEqual(), then do a
bytewise comparison similar to record_image_eq() instead of using the
equality operators. This only makes a difference for ON UPDATE
CASCADE, but for consistency we treat all changes to the PK the same. For
the FK table, we continue to use the equality operators.
Discussion: https://www.postgresql.org/message-id/flat/3326fc2e-bc02-d4c5-e3e5-e54da466e89a@2ndquadrant.com
Starting in ICU 54, collation customization attributes can be
specified in the locale string, for example
"@colStrength=primary;colCaseLevel=yes". Add support for this for
older ICU versions as well, by adding some minimal parsing of the
attributes in the locale string and calling ucol_setAttribute() on
them. This is essentially what never ICU versions do internally in
ucol_open(). This was we can offer this functionality in a consistent
way in all ICU versions supported by PostgreSQL.
Also add some tests for ICU collation customization.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/0270ebd4-f67c-8774-1a5a-91adfb9bb41f@2ndquadrant.com
It looks like we can leave in most of the test cases for Infinity/NaN
inputs, but buildfarm member jacana gets the wrong answer for acosh(Inf).
It's not worth carrying a variant expected file for that, so just disable
that one test.
Discussion: https://postgr.es/m/E1h3nUY-0000sM-Vf@gemulon.postgresql.org
Add support of numeric error suppression to jsonpath as it's required by
standard. This commit doesn't use PG_TRY()/PG_CATCH() in order to implement
that. Instead, it provides internal versions of numeric functions used, which
support error suppression.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Alexander Korotkov, Nikita Glukhov
Reviewed-by: Tomas Vondra
SQL 2016 standards among other things contains set of SQL/JSON features for
JSON processing inside of relational database. The core of SQL/JSON is JSON
path language, allowing access parts of JSON documents and make computations
over them. This commit implements partial support JSON path language as
separate datatype called "jsonpath". The implementation is partial because
it's lacking datetime support and suppression of numeric errors. Missing
features will be added later by separate commits.
Support of SQL/JSON features requires implementation of separate nodes, and it
will be considered in subsequent patches. This commit includes following
set of plain functions, allowing to execute jsonpath over jsonb values:
* jsonb_path_exists(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_match(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query_array(jsonb, jsonpath[, jsonb, bool]).
* jsonb_path_query_first(jsonb, jsonpath[, jsonb, bool]).
This commit also implements "jsonb @? jsonpath" and "jsonb @@ jsonpath", which
are wrappers over jsonpath_exists(jsonb, jsonpath) and jsonpath_predicate(jsonb,
jsonpath) correspondingly. These operators will have an index support
(implemented in subsequent patches).
Catversion bumped, to add new functions and operators.
Code was written by Nikita Glukhov and Teodor Sigaev, revised by me.
Documentation was written by Oleg Bartunov and Liudmila Mantrova. The work
was inspired by Oleg Bartunov.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Nikita Glukhov, Teodor Sigaev, Alexander Korotkov, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Tomas Vondra, Andrew Dunstan, Pavel Stehule, Alexander Korotkov
When libpq is loaded in the server (for instance, by
libpqwalreceiver), it may use libpq environment variables set in the
postmaster environment for connection parameter defaults. This has
some confusing effects in our test suites. For example, the TAP test
infrastructure sets PGAPPNAME to allow identifying clients in the
server log. But this environment variable is also inherited by
temporary servers started with pg_ctl and is then in turn used by
libpqwalreceiver as the application_name for connecting to remote
servers where it then shows up in pg_stat_replication and is relevant
for things like synchronous_standby_names. Replication already has a
suitable default for application_name, and overriding that
accidentally then requires the individual test cases to re-override
that, which is all very confusing and unnecessary.
To fix, unset PGAPPNAME temporarily before running pg_ctl start or
restart in the tests.
More comprehensive approaches like unsetting all environment variables
in pg_ctl were considered but might be too complicated to achieve
portably.
The now unnecessary re-overriding of application_name by test cases is
also removed.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/33383613-690e-6f1b-d5ba-4957ff40f6ce@2ndquadrant.com
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
The previous test order had the effect that if something was wrong
with the identity functionality, the create_table_like test would
likely fail or crash first, which is confusing. Reorder so that the
identity test comes before create_table_like.
The assertions added by commits 34ea1ab7f et al found another problem:
set_dummy_rel_pathlist and mark_dummy_rel were failing to label
the dummy paths they create with the correct outer_relids, in case
the relation is necessarily parameterized due to having lateral
references in its tlist. It's likely that this has no user-visible
consequences in production builds, at the moment; but still an assertion
failure is a bad thing, so back-patch the fix.
Per bug #15694 from Roman Zharkov (via Alexander Lakhin)
and an independent report by Tushar Ahuja.
Discussion: https://postgr.es/m/15694-74f2ca97e7044f7f@postgresql.org
Discussion: https://postgr.es/m/7d72ab20-c725-3ce2-f99d-4e64dd8a0de6@enterprisedb.com
A couple of queries are run on the primary to create and fill in a test
table, which gets checked on the standby afterwards. However the test
was not waiting for the confirmation that the necessary records have
been replayed on the standby, leading to spurious failures.
Per buildfarm member loach. Thanks to Thomas Munro for the report and
Tom Lane for the failure analysis.
Discussion: https://postgr.es/m/CA+hUKGLUpqG52xtriUz5RpmeKPoEfNxNc-CginG+Cx+X2-Ycew@mail.gmail.com
Preliminary results from the buildfarm suggest that no platform gets
commit c6f153dcf's test cases wrong by more than one or two units in
the last place, so setting extra_float_digits = 0 should be plenty
to hide the cross-platform variations.
Also, add tests for Infinity/NaN inputs. I think it highly likely
that we'll end up removing these again, rather than adding code to
make ancient platforms conform. But it seems useful to find out
just how many platforms have such issues before we make a decision.
Discussion: https://postgr.es/m/E1h3nUY-0000sM-Vf@gemulon.postgresql.org
