The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
At present, there is an undocumented coding rule that you must call
RecoveryInProgress(), or do something else that results in a call
to InitXLogInsert(), before trying to write WAL. Otherwise, the
WAL construction buffers won't be initialized, resulting in
failures.
Since it's not good to rely on a status inquiry function like
RecoveryInProgress() having the side effect of initializing
critical data structures, instead do the initialization eariler,
when the backend first starts up.
Patch by me. Reviewed by Nathan Bossart and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
Commit 90627cf98 added support for retaining the data directory even on
successful tests, but failed to document the environment variable which
controls retention. This adds a small note to the TAP test README about
PG_TEST_NOCLEAN which when set skips removing the data directories from
successful tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2B02C1B3-3F41-4E14-92B9-005D83623A0B@yesql.se
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
It is up to the heap_page_prune() caller to decide what to do about
updating the FSM for a page following pruning. Update old comments that
address what we might want to do as if it was the responsibility of
heap_page_prune() itself. heap_page_prune() doesn't have enough
high-level context to make a sensible choice.
Presently, the archive_status directory was scanned for each file to
archive. When there are many status files, say because archive_command
has been failing for a long time, these directory scans can get very
slow. With this change, the archiver remembers several files to archive
during each directory scan, speeding things up.
To ensure timeline history files are archived as quickly as possible,
XLogArchiveNotify() forces the archiver to do a new directory scan as
soon as the .ready file for one is created.
Nathan Bossart, per a long discussion involving many people. It is
not clear to me exactly who out of all those people reviewed this
particular patch.
Discussion: http://postgr.es/m/CA+TgmobhAbs2yabTuTRkJTq_kkC80-+jw=pfpypdOJ7+gAbQbw@mail.gmail.com
Discussion: http://postgr.es/m/620F3CE1-0255-4D66-9D87-0EADE866985A@amazon.com
It's a coin toss which of these is a better default assumption.
However, of the machines we have in the buildfarm, the only ones
relying on the fallback socklen_t definition are ancient HPUX,
and on that platform unsigned int is the right choice. Minor
tweak to ee3a1a5b6.
Discussion: https://postgr.es/m/1440792.1636558888@sss.pgh.pa.us
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
Commit 5a1007a508 tried to introduce
an assertion that the block size was at least twice the size of a
tar block, but I got the math wrong. My error was reported to me
off-list.
In XLogCtlData, rename the structure member ThisTimeLineID to
InsertTimeLineID and update the comments to make clear that it's only
expected to be set after recovery is complete.
In StartupXLOG, replace the local variables ThisTimeLineID and
PrevTimeLineID with new local variables replayTLI and newTLI. In the
old scheme, ThisTimeLineID was the replay TLI until we created a new
timeline, and after that the replay TLI was in PrevTimeLineID. Now,
replayTLI is the TLI from which we last replayed WAL throughout the
entire function, and newTLI is either that, or the new timeline created
upon promotion.
Remove some misleading comments from the comment block just above where
recoveryTargetTimeLineGoal and friends are declared. It's become
incorrect, not only because ThisTimeLineID as a variable is now gone,
but also because the rmgr code does not care about ThisTimeLineID and
has not since what used to be the TLI field in the page header was
repurposed to store the page checksum.
Add a comment GetFlushRecPtr that it's only supposed to be used in
normal running, and an assertion to verify that this is so.
Per some ideas from Michael Paquier and some of my own. Review by
Michael Paquier also.
Discussion: http://postgr.es/m/CA+TgmoY1a2d1AnVR3tJcKmGGkhj7GGrwiNwjtKr21dxOuLBzCQ@mail.gmail.com
A couple of code paths related to logical decoding (WAL sender, slot
advancing, etc.) use XLogReadRecord(), feeding on error messages
generated by walreader.c on a failure. All those messages have no
context, making it harder to spot from where an error could come even if
these should not happen. All the other callers of XLogReadRecord() do
that already.
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YYnTH6OyOwQcAdkw@paquier.xyz
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
Earlier versions of PostgreSQL featured a version of pg_basebackup
that wanted to edit tar archives but was too dumb to parse them
properly. The server made things easier for the client by failing
to add the two blocks of zero bytes that ought to end a tar file,
leaving it up to the client to do that.
But since commit 23a1c6578c, we
don't need this hack any more, because pg_basebackup is now smarter
and can parse tar files even if they are properly terminated! So
change the server to always properly terminate the tar files. Older
versions of pg_basebackup can't talk to new servers anyway, so
there's no compatibility break.
On the pg_basebackup side, we see still need to add the terminating
zero bytes if we're talking to an older server, but not when the
server is v15+. Hopefully at some point we'll be able to remove
some of this compatibility cruft, but it seems best to hang on to
it for now.
In passing, add a file header comment to bbstreamer_tar.c, to make
it clearer what's going on here.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
Commit 23a1c6578c improved
pg_basebackup's ability to parse tar archives, but also arranged
to parse them only when we need to make some modification to the
contents of the archive. That's a problem, because the server
doesn't actually terminate tar archives. When the new parsing
logic was engaged, pg_basebackup would properly terminate the
tar file, but when it was skipped, pg_basebackup would just write
whatever it got from the server, meaning that the terminator
was missing.
Most versions of tar are willing to overlook the missing terminator, but
the AIX buildfarm animals were not. Fix by inventing a new kind of
bbstreamer that just blindly adds a terminator, and using it whenever we
don't parse the tar archive.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Quite a few buildfarm animals are warning about this, and lapwing
is actually failing (because -Werror). It's a false positive AFAICS,
so no need to do more than zero the variable to start with.
Discussion: https://postgr.es/m/YYXJnUxgw9dZKxlX@paquier.xyz
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Since 8162464a25 we do so in win32_port.h. But it likely didn't do much
before that either, because at that point windows.h was already included via
win32_port.h.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/612842.1636237461@sss.pgh.pa.us
Commit db7d1a7b0 pulled out Mkvcbuild.pm's custom support for building
contrib/pgcrypto, but neglected to inform it that that module can now
be built normally. Or at least I guess it can now be built normally.
But this is definitely causing bowerbird to fail, since it's trying to
test a module it hasn't built.
The tsvector data type has always forbidden lexemes to be empty.
However, array_to_tsvector() didn't get that memo, and would
allow an empty-string array element to become an empty lexeme.
This could result in dump/restore failures later, not to mention
whatever semantic issues might be behind the original prohibition.
However, other functions that take a plain text input directly as
a lexeme value do not need a similar restriction, because they only
match the string against existing tsvector entries. In particular
it'd be a bad idea to make ts_delete() reject empty strings, since
that is the most convenient way to clean up any bad data that might
have gotten into a tsvector column via this bug.
Reflecting on that, let's also remove the prohibition against NULL
array elements in tsvector_delete_arr and tsvector_setweight_by_filter.
It seems more consistent to ignore them, as an empty-string element
would be ignored.
There's a case for back-patching this, since it's clearly a bug fix.
On balance though, it doesn't seem like something to change in a
minor release.
Jean-Christophe Arnu
Discussion: https://postgr.es/m/CAHZmTm1YVndPgUVRoag2WL0w900XcoiivDDj-gTTYBsG25c65A@mail.gmail.com
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
Commit 23a1c6578 thought it'd be cute to refactor
pg_basebackup/Makefile with a new variable BBOBJS,
but our MSVC build system knows nothing of that.
Per buildfarm.
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
Add new comments that spell out what VACUUM expects from heap pruning:
pruning must never leave behind DEAD tuples that still have tuple
storage. This has at least been the case since commit 8523492d, which
established the principle that vacuumlazy.c doesn't have to deal with
DEAD tuples that still have tuple storage directly, except perhaps by
simply retrying pruning (to handle a rare corner case involving
concurrent transaction abort).
In passing, update some references to old symbol names that were missed
by the snapshot scalability work (specifically commit dc7420c2c9).
StartupXLOG() still has ThisTimeLineID as a local variable, but the
remaining code in xlog.c now needs to the relevant TimeLineID by some
other means. Mostly, this means that we now pass it as a function
parameter to a bunch of functions where we didn't previously.
However, a few cases require special handling:
- In functions that might be called by outside callers who
wouldn't necessarily know what timeline to specify, we get
the timeline ID from shared memory. XLogCtl->ThisTimeLineID
can be used in most cases since recovery is known to have
completed by the time those functions are called. In
xlog_redo(), we can use XLogCtl->replayEndTLI.
- XLogFileClose() needs to know the TLI of the open logfile.
Do that with a new global variable openLogTLI. While
someone could argue that this is just trading one global
variable for another, the new one has a far more narrow
purposes and is referenced in just a few places.
- read_backup_label() now returns the TLI that it obtains
by parsing the backup_label file. Previously, ReadRecord()
could be called to parse the checkpoint record without
ThisTimeLineID having been initialized. Now, the timeline
is passed down, and I didn't want to pass an uninitialized
variable; this change lets us avoid that. The old coding
didn't seem to have any practical consequences that we need
to worry about, but this is cleaner.
- In BootstrapXLOG(), it's just a constant.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
In slotfuncs.c, pg_replication_slot_advance() needs to determine
the LSN up to which the slot should be advanced, but that doesn't
require us to update ThisTimeLineID, because none of the code called
from here depends on it. If the replication slot is logical,
pg_logical_replication_slot_advance will call read_local_xlog_page,
which does use ThisTimeLineID, but also takes care of making sure
it's up to date. If the replication slot is physical, the timeline
isn't used for anything at all.
In logicalfuncs.c, pg_logical_slot_get_changes_guts() has the same
issue: the only code we're going to run that cares about timelines
is in or downstream of read_local_xlog_page, which already makes
sure that the correct value gets set. Hence, don't do it here.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
When a role being dropped contains is referenced by catalog objects that
are concurrently also being dropped, a crash can result while trying to
construct the string that describes the objects. Suppress that by
ignoring objects whose descriptions are returned as NULL.
The majority of relevant codesites were already cautious about this
already; we had just missed a couple.
This is an old bug, so backpatch all the way back.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17126-21887f04508cb5c8@postgresql.org
pg_basebackup knows how to do quite a few things with a backup that it
gets from the server, like just write out the files, or compress them
first, or even parse the tar format and inject a modified
postgresql.auto.conf file into the archive generated by the server.
Unforatunely, this makes pg_basebackup.c a very large source file, and
also somewhat difficult to enhance, because for example the knowledge
that the server is sending us a 'tar' file rather than some other sort
of archive is spread all over the place rather than centralized.
In an effort to improve this situation, this commit invents a new
'bbstreamer' abstraction. Each archive received from the server is
fed to a bbstreamer which may choose to dispose of it or pass it
along to some other bbstreamer. Chunks may also be "labelled"
according to whether they are part of the payload data of a file
in the archive or part of the archive metadata.
So, for example, if we want to take a tar file, modify the
postgresql.auto.conf file it contains, and the gzip the result
and write it out, we can use a bbstreamer_tar_parser to parse the
tar file received from the server, a bbstreamer_recovery_injector
to modify the contents of postgresql.auto.conf, a
bbstreamer_tar_archiver to replace the tar headers for the file
modified in the previous step with newly-built ones that are
correct for the modified file, and a bbstreamer_gzip_writer to
gzip and write the resulting data. Only the objects with "tar"
in the name know anything about the tar archive format, and in
theory we could re-archive using some other format rather than
"tar" if somebody wanted to write the code.
These chances do add a substantial amount of code, but I think the
result is a lot more maintainable and extensible. pg_basebackup.c
itself shrinks by roughly a third, with a lot of the complexity
previously contained there moving into the newly-added files.
Patch by me. The larger patch series of which this is a part has been
reviewed and tested at various times by Andres Freund, Sumanta
Mukherjee, Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja,
Mark Dilger, Sergei Kornilov, and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
The base backup code has accumulated a healthy number of new
features over the years, but it's becoming increasingly difficult
to maintain and further enhance that code because there's no
real separation of concerns. For example, the code that
understands knows the details of how we send data to the client
using the libpq protocol is scattered throughout basebackup.c,
rather than being centralized in one place.
To try to improve this situation, introduce a new 'bbsink' object
which acts as a recipient for archives generated during the base
backup progress and also for the backup manifest. This commit
introduces three types of bbsink: a 'copytblspc' bbsink forwards the
backup to the client using one COPY OUT operation per tablespace and
another for the manifest, a 'progress' bbsink performs command
progress reporting, and a 'throttle' bbsink performs rate-limiting.
The 'progress' and 'throttle' bbsink types also forward the data to a
successor bbsink; at present, the last bbsink in the chain will
always be of type 'copytblspc'. There are plans to add more types
of 'bbsink' in future commits.
This abstraction is a bit leaky in the case of progress reporting,
but this still seems cleaner than what we had before.
Patch by me, reviewed and tested by Andres Freund, Sumanta Mukherjee,
Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja, Mark Dilger,
and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
Expand the checks of toasted attributes to complain if the rawsize is
overlarge. For compressed attributes, also complain if compression
appears to have expanded the attribute or if the compression method is
invalid.
Mark Dilger, reviewed by Justin Pryzby, Alexander Alekseev, Heikki
Linnakangas, Greg Stark, and me.
Discussion: http://postgr.es/m/8E42250D-586A-4A27-B317-8B062C3816A8@enterprisedb.com
pgcrypto had internal implementations of some encryption algorithms,
as an alternative to calling out to OpenSSL. These were rarely used,
since most production installations are built with OpenSSL. Moreover,
maintaining parallel code paths makes the code more complex and
difficult to maintain.
This patch removes these internal implementations. Now, pgcrypto is
only built if OpenSSL support is configured.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/0b42f1df-8cba-6a30-77d7-acc241cc88c1%40enterprisedb.com
Completion is added for more object types, like domain constraints, text
search-ish objects or policies. Moreover, the area is reorganized,
changing the list of objects supported by COMMENT to be in the same
order as the documentation to ease future additions.
Author: Ken Kato
Reviewed-by: Fujii Masao, Shinya Kato, Suraj Khamkar, Michael Paquier
Discussion: https://postgr.es/m/6e0c2f3f657b229bea32d098d118f307@oss.nttdata.com
Add hardening to the heapam index tuple deletion path to catch TIDs in
index pages that point to a heap item that index tuples should never
point to. The corruption we're trying to catch here is particularly
tricky to detect, since it typically involves "extra" (corrupt) index
tuples, as opposed to the absence of required index tuples in the index.
For example, a heap TID from an index page that turns out to point to an
LP_UNUSED item in the heap page has a good chance of being caught by one
of the new checks. There is a decent chance that the recently fixed
parallel VACUUM bug (see commit 9bacec15) would have been caught had
that particular check been in place for Postgres 14. No backpatch of
this extra hardening for now, though.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzk-4_raTzawWGaiqNvkpwDXxv3y1AQhQyUeHfkU=tFCeA@mail.gmail.com
pg_receivewal gains a new option, --compression-method=lz4, available
when the code is compiled with --with-lz4. Similarly to gzip, this
gives the possibility to compress archived WAL segments with LZ4. This
option is not compatible with --compress.
The implementation uses LZ4 frames, and is compatible with simple lz4
commands. Like gzip, using --synchronous ensures that any data will be
flushed to disk within the current .partial segment, so as it is
possible to retrieve as much WAL data as possible even from a
non-completed segment (this requires completing the partial file with
zeros up to the WAL segment size supported by the backend after
decompression, but this is the same as gzip).
The calculation of the streaming start LSN is able to transparently find
and check LZ4-compressed segments. Contrary to gzip where the
uncompressed size is directly stored in the object read, the LZ4 chunk
protocol does not store the uncompressed data by default. There is
contentSize that can be used with LZ4 frames by that would not help if
using an archive that includes segments compressed with the defaults of
a "lz4" command, where this is not stored. So, this commit has taken
the most extensible approach by decompressing the already-archived
segment to check its uncompressed size, through a blank output buffer in
chunks of 64kB (no actual performance difference noticed with 8kB, 16kB
or 32kB, and the operation in itself is actually fast).
Tests have been added to verify the creation and correctness of the
generated LZ4 files. The latter is achieved by the use of command
"lz4", if found in the environment.
The tar-based WAL method in walmethods.c, used now only by
pg_basebackup, does not know yet about LZ4. Its code could be extended
for this purpose.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
These assertions document (and verify) our high level assumptions about
how pruning can and cannot affect existing items from target heap pages.
For example, one of the new assertions verifies that pruning does not
set a heap-only tuple to LP_DEAD.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=vhvBx1GjF+oueHh8YQcHoQYrMi0F0zFMHEr8yc4sCoA@mail.gmail.com
The option name was incorrect in one of the error messages, and the
short option 'I' was used in the code but we did not intend things to be
this way. While on it, fix the documentation to refer to a "method",
and not a "level.
Oversights in commit d62bcc8, that I have detected after more review of
the LZ4 patch for pg_receivewal.
pg_receivewal includes since cada1af the option --compress, to allow the
compression of WAL segments using gzip, with a value of 0 (the default)
meaning that no compression can be used.
This commit introduces a new option, called --compression-method, able
to use as values "none", the default, and "gzip", to make things more
extensible. The case of --compress=0 becomes fuzzy with this option
layer, so we have made the choice to make pg_receivewal return an error
when using "none" and a non-zero compression level, meaning that the
authorized values of --compress are now [1,9] instead of [0,9]. Not
specifying --compress with "gzip" as compression method makes
pg_receivewal use the default of zlib instead (Z_DEFAULT_COMPRESSION).
The code in charge of finding the streaming start LSN when scanning the
existing archives is refactored and made more extensible. While on it,
rename "compression" to "compression_level" in walmethods.c, to reduce
the confusion with the introduction of the compression method, even if
the tar method used by pg_basebackup does not rely on the compression
method (yet, at least), but just on the compression level (this area
could be improved more, actually).
This is in preparation for an upcoming patch that adds LZ4 support to
pg_receivewal.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar,
Robert Haas
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
If lo_export() fails to open the target file or to write to it, it leaks
the created LargeObjectDesc and its snapshot in the top-transaction
context and resource owner. That's pretty harmless, it's a small leak
after all, but it gives the user a "Snapshot reference leak" warning.
Fix by using a short-lived memory context and no resource owner for
transient LargeObjectDescs that are opened and closed within one function
call. The leak is easiest to reproduce with lo_export() on a directory
that doesn't exist, but in principle the other lo_* functions could also
fail.
Backpatch to all supported versions.
Reported-by: Andrew B
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/32bf767a-2d65-71c4-f170-122f416bab7e@iki.fi
Commit b4af70cb inverted the return value of the function
parallel_processing_is_safe(), but missed the amvacuumcleanup test.
Index AMs that don't support parallel cleanup at all were affected.
The practical consequences of this bug were not very serious. Hash
indexes are affected, but since they just return the number of blocks
during hashvacuumcleanup anyway, it can't have had much impact.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA-Em+aeVPmBbL_s1V-ghsJQSxYL-i3JP8nTfPiD1wjKw@mail.gmail.com
Backpatch: 14-, where commit b4af70cb appears.
Buildfarm member hamerkop has been failing for the last few days
with errors that look like OpenSSL's X509-related symbols have
not been imported into be-secure-openssl.c. It's unclear why
this should be, but let's try adding an explicit #include of
<openssl/x509v3.h>, as there has long been in fe-secure-openssl.c.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
In walreceiver, set the publisher's relevant GUCs (datestyle,
intervalstyle, extra_float_digits) to the same values that pg_dump uses,
and for the same reason: we need the output to be read the same way
regardless of the receiver's settings. Without this, it's possible
for subscribers to misinterpret transmitted values.
Although this is clearly a bug fix, it's not without downsides:
subscribers that are storing values into some other datatype, such as
text, could get different results than before, and perhaps be unhappy
about that. Given the lack of previous complaints, it seems best
to change this only in HEAD, and to call it out as an incompatible
change in v15.
Japin Li, per report from Sadhuprasad Patro
Discussion: https://postgr.es/m/CAFF0-CF=D7pc6st-3A9f1JnOt0qmc+BcBPVzD6fLYisKyAjkGA@mail.gmail.com
This undoes a mistake in 1ec7679f1: domainval and domainnull were
meant to live across loop iterations, but they were incorrectly
moved inside the loop. The effect was only to emit useless extra
EEOP_MAKE_READONLY steps, so it's not a big deal; nonetheless,
back-patch to v13 where the mistake was introduced.
Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAqXuhbkaAp-sGH6dR6Nsq7v28_0TPexHOm6FiDYqwQD-w@mail.gmail.com
As in commits 6301c3ada and e9d9ba2a4, avoid doing repetitive
list_delete_first() operations, since that would be expensive when
there are many files waiting to be unlinked. This is a slightly
larger change than in those cases. We have to keep the list state
valid for calls to AbsorbSyncRequests(), so it's necessary to invent a
"canceled" field instead of immediately deleting PendingUnlinkEntry
entries. Also, because we might not be able to process all the
entries, we need a new list primitive list_delete_first_n().
list_delete_first_n() is almost list_copy_tail(), but it modifies the
input List instead of making a new copy. I found a couple of existing
uses of the latter that could profitably use the new function. (There
might be more, but the other callers look like they probably shouldn't
overwrite the input List.)
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Previously failures of initial connection and logfile open caused pgbench
to proceed the benchmarking, report the incomplete results and exit with
status 2. It didn't make sense to proceed the benchmarking even when
pgbench could not start as prescribed.
This commit improves pgbench so that early errors that occur when
starting benchmark such as those failures should make pgbench exit
immediately with status 1.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
We don't modify any shared state in this function which could cause
problems for any concurrent session. This will make it look similar to the
other updates for the same structure (TransactionState) which avoids
confusion for future readers of code.
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
Commit 0bead9af48 introduced XLOG_INCLUDE_XID flag to indicate that the
WAL record contains subXID-to-topXID association. It uses that flag later
to mark in CurrentTransactionState that top-xid is logged so that we
should not try to log it again with the next WAL record in the current
subtransaction. However, we can use a localized variable to pass that
information.
In passing, change the related function and variable names to make them
consistent with what the code is actually doing.
Author: Dilip Kumar
Reviewed-by: Alvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
The unicode characters, while in comments and not code, caused MSVC
to emit compiler warning C4819:
The file contains a character that cannot be represented in the
current code page (number). Save the file in Unicode format to
prevent data loss.
Fix by replacing the characters in print.c with descriptive comments
containing the codepoints and symbol names, and remove the character
in brin_bloom.c which was a footnote reference copied from the paper
citation.
Per report from hamerkop in the buildfarm.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/340E4118-0D0C-4E85-8141-8C40EB22DA3A@yesql.se
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
pg_receivewal is able to follow a timeline switch, but this was not
tested. This test uses an empty archive location with a restart done
from a slot, making its implementation a tad simpler than if we would
reuse an existing archive directory.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
Rearrange src/test/perl/README so that the first section is more
clearly "how to run these tests", and the rest "how to write new
tests". Add some basic info there about debugging test failures.
Then, add cross-refs to that READNE from other READMEs that
describe how to run TAP tests.
Per suggestion from Kevin Burke, though this is not his original
patch.
Discussion: https://postgr.es/m/CAKcy5eiSbwiQnmCfnOnDCVC7B8fYyev3E=6pvvECP9pLE-Fcuw@mail.gmail.com
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Previously, we pointed at the surrounding block's BEGIN keyword.
If there are multiple variables being initialized in a DECLARE section,
this isn't good enough: it can be quite confusing and unhelpful.
We do know where the variable's declaration started, so it just takes
a tiny bit more error-reporting infrastructure to use that.
Discussion: https://postgr.es/m/713975.1635530414@sss.pgh.pa.us
Commit 9ce346eabf added startup
progress reporting, but begin_startup_progress_phase has a race
condition: the timeout for the previous phase might fire just
before we reschedule the interrupt for the next phase.
To avoid the race, disable the timeout, clear the flag, and then
re-enable the timeout.
Patch by me, reviewed by Nitin Jadhav.
Discussion: https://postgr.es/m/CA+TgmoYq38i6iAzfRLVxA6Cm+wMCf4WM8wC3o_a+X_JvWC8bJg@mail.gmail.com
The previous code used ThisTimeLineID, which need not even be
initialized here, although it usually was in practice, because
pg_basebackup issues IDENTIFY_SYSTEM before calling BASE_BACKUP,
and that initializes ThisTimeLineID as a side effect. That's not
really good enough, though, not only because we shoudn't be counting
on side effects like that, but also because the TLI could change
meanwhile. Fortunately, we have convenient access to more meaningful
TLI values, so use those instead.
Because of the way this logic is coded, the consequences of using
a possibly-incorrect TLI here are no worse than a slightly confusing
error message, I don't want to take any risk here, so no back-patch
at least for now.
Patch by me, reviewed by Kyotaro Horiguchi and Michael Paquier
Discussion: http://postgr.es/m/CA+TgmoZRNWGWYDX9RgTXMG6_nwSdB=PB-PPRUbvMUTGfmL2sHQ@mail.gmail.com
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
We had a test showing that a variable isn't referenceable in its
own initialization expression, nor in prior ones in the same block.
It *is* referenceable in later expressions in the same block, but
AFAICS there is no test case exercising that. Add one, and also
add some error cases.
Also, document that this is possible, since the docs failed to
cover the point.
Per question from tomás at tuxteam. I don't feel any need to
back-patch this, but we should ensure we don't break it in future.
Discussion: https://postgr.es/m/20211029121435.GA5414@tuxteam.de
DST law changes in Fiji, Jordan, Palestine, and Samoa. Historical
corrections for Barbados, Cook Islands, Guyana, Niue, Portugal, and
Tonga.
Also, the Pacific/Enderbury zone has been renamed to Pacific/Kanton.
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Africa/Accra, America/Atikokan,
America/Blanc-Sablon, America/Creston, America/Curacao,
America/Nassau, America/Port_of_Spain, Antarctica/DumontDUrville,
and Antarctica/Syowa.
This commit improves the speed of those tests by 25~30%, using some
simple ideas to reduce the amount of data written by pg_receivewal:
- Use a segment size of 1MB. While reducing the amount of data zeroed
by pg_receivewal for the new segments, this improves the code coverage
with a non-default segment size.
- In the last test involving a slot's restart_lsn, generate a checkpoint
to advance the redo LSN and the WAL retained by the slot created,
reducing the number of segments that need to be archived. This counts
for most of the gain.
- Minimize the amount of data inserted into the dummy table.
Reviewed-by: Ronan Dunklau
Discussion: https://postgr.es/m/YXqYKAdVEqmyTltK@paquier.xyz
Since the only possible divisors are 8, 10, and 16, it doesn't cost
much code space to replace the division loop with three copies using
constant divisors. On most machines, division by a constant can be
done a lot more cheaply than division by an arbitrary value.
A microbenchmark testing just snprintf("foo %d") with a 9-digit value
showed about a 2X speedup for me (tgl). Most of Postgres isn't too
dependent on the speed of snprintf, so that the effect in real-world
cases is barely measurable. Still, a cycle saved is a cycle earned.
Arjan van de Ven
Discussion: https://postgr.es/m/40a4b32a-b841-4667-11b2-a0baedb12714@linux.intel.com
Discussion: https://postgr.es/m/6e51c644-1b6d-956e-ac24-2d1b0541d532@linux.intel.com
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
This adds tests checking for the execution of both commands. The
recovery test 002_archiving.pl is nicely adapted to that, as promotion
is triggered already twice there, and even if any of those commands fail
they don't affect recovery or promotion.
A command success is checked using a file generated by an "echo"
command, that should be able to work in all the buildfarm environments,
even Msys (but we'll know soon about that). Command failure is tested
with an "echo" command that points to a path that does not exist,
scanning the backend logs to make sure that the failure happens. Both
rely on the backend triggering the commands from the root of the data
folder, making its logic more robust.
Thanks to Neha Sharma for the extra tests on Windows.
Author: Amul Sul, Michael Paquier
Reviewed-by: Andres Freund, Euler Taveira
Discussion: https://postgr.es/m/CAAJ_b95R_c4T5moq30qsybSU=eDzDHm=4SPiAWaiMWc2OW7=1Q@mail.gmail.com
Comments above _bt_findinsertloc() that talk about LP_DEAD items are now
out of place. We already discuss index tuple deletion at an earlier
point in the same comment block.
Oversight in commit d168b666.
Grant privileges on views pg_backend_memory_contexts and
pg_shmem_allocations to the role pg_read_all_stats. Also grant on the
underlying functions that those views depend on.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/CALj2ACWAZo3Ar_EVsn2Zf9irG+hYK3cmh1KWhZS_Od45nd01RA@mail.gmail.com
Commit b4c4a00ea refactored the gist of the sslfiles target into a
separate makefile in order to override settings in Makefile.global.
The invocation of this this file didn't however include the absolute
path for VPATH builds, resulting in "make clean" failing. Fix by
providing the path to the new makefile.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211026174152.jjcagswnbhxu7uqz@alap3.anarazel.de
As 98ec35b has proved, there has never been any coverage in this area of
the code. This commit adds a new TAP test with a template database that
includes a small set of shared dependencies copied to a new database.
The test is added in createdb, where we have never tested that -T
generates a query with TEMPLATE, either.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/YXDTl+PfSnqmbbkE@paquier.xyz
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
Remove superuser check, allowing any user granted permissions on
pg_log_backend_memory_contexts() to log the memory contexts of any
backend.
Note that this could allow a privileged non-superuser to log the
memory contexts of a superuser backend, but as discussed, that does
not seem to be a problem.
Reviewed-by: Nathan Bossart, Bharath Rupireddy, Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/e5cf6684d17c8d1ef4904ae248605ccd6da03e72.camel@j-davis.com
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
The previous coding relied on the memory for the slots being zeroed
elsewhere, which while it was true in this case is not an contract
which is guaranteed to hold. Explicitly clear the tts_isnull array
to ensure that the slots are filled from a known state.
Backpatch to v14 where the catalog multi-inserts were introduced.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
The case checking for a NULL output when a slot does not exist was
too lax, as it was passing for any output generated by the query. This
fixes the matching pattern to be what it should be, matching only on
"||".
Oversight in b4ada4e.
Prior to this patch, when running pg_receivewal, the streaming start
point would be the current location of the archives if anything is
found in the local directory where WAL segments are written, and
pg_receivewal would fall back to the current WAL flush location if there
are no archives, as of the result of an IDENTIFY_SYSTEM command.
If for some reason the WAL files from pg_receivewal were moved, it is
better to try a restart where we left at, which is the replication
slot's restart_lsn instead of skipping right to the current flush
location, to avoid holes in the WAL backed up. This commit changes
pg_receivewal to use the following sequence of methods to determine the
starting streaming LSN:
- Scan the local archives.
- Use the slot's restart_lsn, if supported by the backend and if a slot
is defined.
- Fallback to the current flush LSN as reported by IDENTIFY_SYSTEM.
To keep compatibility with older server versions, we only attempt to use
READ_REPLICATION_SLOT if the backend version is at least 15, and
fallback to the older behavior of streaming from the current flush
LSN if the command is not supported.
Some TAP tests are added to cover this feature.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
According to the comments, we initialize sendTimeLineIsHistoric
and sendTimeLine here for the benefit of WalSndSegmentOpen.
However, the only way that can happen is if logical_read_xlog_page
calls WALRead. And since logical_read_xlog_page initializes the
same global variables internally, we don't need to also do it here.
These initializations have been here since replication slots were
introduced in commit 858ec11858. They
were certainly useless at that time, too, because logical decoding
didn't yet exist then, and physical replication doesn't examine any
WAL at the time of slot creation. I haven't checked all the
intermediate versions, but I suspect there's no point at which
this code ever did anything useful.
To reduce future confusion, remove the code. Since there's no
functional defect, no back-patch.
Discussion: http://postgr.es/m/CA+TgmobSWzacEs+r6C-7DrOPDHoDar4i9gzxB3SCBr5qjnLmVQ@mail.gmail.com
All the code that runs in the startup process to write WAL records
before that's allowed generally is now consecutive, so there's no
reason to shut the facility to write WAL locally off and then turn
it on again three times in a row.
Unfortunately, this requires a slight kludge in the checkpointer,
which needs to separately enable writing WAL in order to write the
checkpoint record. Because that code might run in the same process
as StartupXLOG() if we are in single-user mode, we must save/restore
the state of the LocalXLogInsertAllowed flag. Hopefully, we'll be
able to eliminate this wart in further refactoring, but it's
not too bad anyway.
Amul Sul, with modifications by me.
Discussion: http://postgr.es/m/CAAJ_b97fysj6sRSQEfOHj-y8Jfd5uPqOgO74qast89B4WfD+TA@mail.gmail.com
This does a better job grouping related operations together, since
all of the WAL records that we need to write prior to allowing WAL
writes generally and written by a single uninterrupted stretch of code.
Since CleanupAfterArchiveRecovery() just (1) runs recovery_end_command,
(2) removes non-parent xlog files, and (3) archives any final partial
segment, this should be safe, because all of those things are pretty
much unrelated to the WAL record written by XLogReportParameters().
Amul Sul, per a suggestion from me
Discussion: http://postgr.es/m/CAAJ_b97fysj6sRSQEfOHj-y8Jfd5uPqOgO74qast89B4WfD+TA@mail.gmail.com
In selectnewtape(), use 'nOutputTapes' rather than 'nOutputRuns' in the
check for whether to start a new tape or to append a new run to an
existing tape. Until 'maxTapes' is reached, nOutputTapes is always equal
to nOutputRuns, so it doesn't change the logic, but it seems more logical
to compare # of tapes with # of tapes. Also, currently maxTapes is never
modified after the merging begins, but written this way, the code would
still work if it was. (Although the nOutputRuns == nOutputTapes assertion
would need to be removed and using nOutputRuns % nOutputTapes to
distribute the runs evenly across the tapes wouldn't do a good job
anymore).
Similarly in mergeruns(), change to USEMEM(state->tape_buffer_mem) to
account for the memory used for tape buffers. It's equal to availMem
currently, but tape_buffer_mem is more direct and future-proof. For
example, if we changed the logic to only allocate half of the remaining
memory to tape buffers, USEMEM(state->tape_buffer_mem) would still be
correct.
Coverity complained about these. Hopefully this patch helps it to
understand the logic better. Thanks to Tom Lane for initial analysis.
The command is supported for physical slots for now, and returns the
type of slot, its restart_lsn and its restart_tli.
This will be useful for an upcoming patch related to pg_receivewal, to
allow the tool to be able to stream from the position of a slot, rather
than the last WAL position flushed by the backend (as reported by
IDENTIFY_SYSTEM) if the archive directory is found as empty, which would
be an advantage in the case of switching to a different archive
locations with the same slot used to avoid holes in WAL segment
archives.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
I found these by running pg_dump under "valgrind --leak-check=full".
The changes in flagInhIndexes() and getIndexes() replace allocation of
an array of which we use only some elements by individual allocations
of just the actually-needed objects. The previous coding wasted some
memory, but more importantly it confused valgrind's leak tracking.
collectComments() and collectSecLabels() remain major blots on
the valgrind report, because they don't PQclear their query
results, in order to avoid a lot of strdup's. That's a dubious
tradeoff, but I'll leave it alone here; an upcoming patch will
modify those functions enough to justify changing the tradeoff.
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Create a hash table that indexes dumpable objects by CatalogId
(that is, catalog OID + object OID). Use this to replace the
former catalogIdMap array, as well as various other single-
catalog index arrays, and also the extension membership map.
In principle this should be faster for databases with many objects,
since lookups are now O(1) not O(log N). However, it seems that these
lookups are pretty much negligible in context, so that no overall
performance change can be measured. But having only one lookup
data structure to maintain makes the code simpler and more flexible,
so let's do it anyway.
Discussion: https://postgr.es/m/2595220.1634855245@sss.pgh.pa.us
The code does not expect sh_error() to return, but the patch
that made this header usable in frontend didn't get that memo.
While here, plaster unlikely() on the tests that decide whether
to invoke sh_error(), and add our standard copyright notice.
Noted by Andres Freund. Back-patch to v13 where this frontend
support came in.
Discussion: https://postgr.es/m/0D54435C-1199-4361-9D74-2FBDCF8EA164@anarazel.de
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
I just got burnt by trying to use pg_malloc instead of pg_malloc0
with this. Save the next hacker some time by not leaving this
API detail undocumented.
The certificate serial number generation was changed in b4c4a00ea to
use the current timestamp. The testharness must thus interrogate the
cert for the serialnumber using "openssl x509" which emits the serial
in hex format. Converting the serial to integer format to match whats
in pg_stat_ssl requires a 64-bit capable Perl. This adds a fallback
to checking for an integer when the tests with a 32-bit Perl.
Per failure on buildfarm member prairiedog.
Discussion: https://postgr.es/m/0D295F43-806D-4B3F-AB98-F941A19E0271@yesql.se
Using for a new database a template database with shared dependencies
that need to be copied over was causing a corruption of pg_shdepend
because of an off-by-one computation error of the index number used for
the values inserted with a slot.
Issue introduced by e3931d0. Monitoring the rest of the code, there are
no similar mistakes.
Reported-by: Sven Klemm
Author: Aleksander Alekseev
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
Support issuing more than one "-c command" switch to a single
psql invocation. This allows combining some things that formerly
required two or more backend launches into a single session.
In particular, we can issue DROP DATABASE as one of the -c commands
without getting "DROP DATABASE cannot run inside a transaction block".
In addition to reducing the number of sessions needed, this patch
also suppresses "NOTICE: database "foo" does not exist, skipping"
chatter that was formerly generated during pg_regress's DROP DATABASE
(or ROLE) IF NOT EXISTS calls. That moves us another step closer
to the ideal of not seeing any messages during successful build/test.
This also eliminates some hard-coded restrictions on the length of
the commands issued. I don't think we were anywhere near hitting
those, but getting rid of the limit is comforting.
Patch by me, but thanks to Nathan Bossart for starting the discussion.
Discussion: https://postgr.es/m/DCBAE0E4-BD56-482F-8A70-7FD0DC0860BE@amazon.com
The build scripts of Visual Studio would fail to detect properly a 3.0.0
build as the check on the second digit was failing. This is adjusted
where needed, allowing the builds to complete. Note that the MSIs of
OpenSSL mentioned in the documentation have not changed any library
names for Win32 and Win64, making this change straight-forward.
Reported-by: htalaco, via github
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YW5XKYkq6k7OtrFq@paquier.xyz
Backpatch-through: 9.6
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
Along the same lines as 047329624, ed2c7f65b and daa9fe8a5, reduce
code duplication by having just one copy of the parts of the query
that are the same across all server versions; and make the
conditionals control the smallest possible amount of code.
This also gets rid of the confusing assortment of different ways
to accomplish the same result that we had here before.
While at it, make sure all three relevant parts of the function
list the fields in the same order. This is just neatnik-ism,
of course.
Discussion: https://postgr.es/m/1240992.1634419055@sss.pgh.pa.us
ldapsearch's deprecated -h/-p arguments were removed, need to use -H now -
which has been around for over 20 years.
As perltidy insists on reflowing the parameters anyway, change order and
"phrasing" to yield a less confusing layout (per suggestion from Tom Lane).
Discussion: https://postgr.es/m/20211009233850.wvr6apcrw2ai6cnj@alap3.anarazel.de
Backpatch: 11-, where the tests were added.
The Makefile handling of certificate and keypairs used for TLS testing
had become quite difficult to work with. Adding a new cert without the
need to regenerate everything was too complicated. This patch refactors
the sslfiles make target such that adding a new certificate requires
only adding a .config file, adding it to the top of the Makefile, and
running make sslfiles.
Improvements:
- Interfile dependencies should be fixed, with the exception of the CRL
dirs.
- New certificates have serial numbers based on the current time,
reducing the chance of collision.
- The CA index state is created on demand and cleaned up automatically
at the end of the Make run.
- *.config files are now self-contained; one certificate needs one
config file instead of two.
- Duplication is reduced, and along with it some unneeded code (and
possible copy-paste errors).
- all configuration files underneath the conf/ directory.
The target is moved to its own makefile in order to avoid colliding
with global make settings.
Author: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/d15a9838344ba090e09fd866abf913584ea19fb7.camel@vmware.com
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
I think when I added this assertion (in commit 8f889b108), I was only
thinking of the use of transformExpressionList at top level of INSERT
and VALUES. But it's also called by transformRowExpr(), which can
certainly occur in an UPDATE targetlist, so it's inappropriate to
suppose that p_multiassign_exprs must be empty. Besides, since the
input is not expected to contain ResTargets, there's no reason it
should contain MultiAssignRefs either. Hence this code need not
be concerned about the state of p_multiassign_exprs, and we should
just drop the assertion.
Per bug #17236 from ocean_li_996. It's been wrong for years,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17236-3210de9bcba1d7ca@postgresql.org
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
The code for initializing the tapes on each merge iteration was skipped
in a parallel worker. I put the !WORKER(state) check in wrong place while
rebasing the patch.
That caused failures in the index build in 'multiple-row-versions'
isolation test, in multiple buildfarm members. On my laptop it was easier
to reproduce by building an index on a larger table, so that you got a
parallel sort more reliably.
The previous commit 65014000b3 changed the variable passed to elog
from an int64 to a size_t variable, but neglected to change the modifier
in the format string accordingly.
Per failure on buildfarm member lapwing.
The advantage of polyphase merge is that it can reuse the input tapes as
output tapes efficiently, but that is irrelevant on modern hardware, when
we can easily emulate any number of tape drives. The number of input tapes
we can/should use during merging is limited by work_mem, but output tapes
that we are not currently writing to only cost a little bit of memory, so
there is no need to skimp on them.
This makes sorts that need multiple merge passes faster.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
All the tape functions, like LogicalTapeRead and LogicalTapeWrite, now
take a LogicalTape as argument, instead of LogicalTapeSet+tape number.
You can create any number of LogicalTapes in a single LogicalTapeSet, and
you don't need to decide the number upfront, when you create the tape set.
This makes the tape management in hash agg spilling in nodeAgg.c simpler.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
Tom Lane
Daniel Gustafsson
Peter Eisentraut
Michael Paquier
Alvaro Herrera
Robert Haas
Amit Kapila
Peter Geoghegan
Noah Misch
Jeff Davis
David Rowley
Andres Freund
Alexander Korotkov
Tomas Vondra
Heikki Linnakangas
Fujii Masao
Magnus Hagander
Thomas Munro
Andrew Dunstan